Directorate Of Municipal Administration Tender

Item Code 9.2.3 Chapter 13 of PWD SR Vol 5 P.No 14 - Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For : HDPE Grade PE80-PN8.0,90mm dia

Item Code 13.32 Chapter 13 of PWD SR Vol 5 P.No 15 - Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work.

Item Code 12.8 Chapter 13 of PWD SR Vol 5 P.No 140 - Hydrofracturing of 146 to 152 mm dia. borewell by using hydrofracturing unit using single packer with minimum of two fractures including transporation of unit, supporting vehicles, crew charges, cost of consumables and yield testing of borewell one hour at once before fracturing and the other after fracturing. The work to be within a radius of 50 kms and including Providing necessary water for fracturing etc. complete.

Item Code 12.34 PWD SR Vol 5 P.No 143 - Providing and laying at site of work MS casing caps as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge

Item Code 12.32 PWD SR Vol 5 P.No 143 - Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty

Item Code 12.5 PWD SR Vol 5 P.No 140 - Cleaning of borewells including yield testing of borewell either using slow or fast rigs for not more than 2 hours at the final depth with a minimum working of 2 hours continuously with air compressor or suitable pump as per specification, including the cost of transportation charges, crew charges, cost of consumables etc. complete

Item Code 13.31 PWD SR Vol 2 P.No 122 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - 50 mm nominal dia Pipes

Item Code 12.16 PWD SR 2023-24 Volume 5 Page No 14 - Dismantling India Mark III hand pump from position, releasing GI pipes, rods, pump, cylinder and strainer. Overhauling the components, replace the wornout parts and re-erecting in position etc. with cutting, threading wherever necessary, adjusting the rod and giving satisfactory test etc. The replaced materials to be returned to the departmental store. The cost exclude the cost of parts required for replacement)

Item Code 1.17.1 of PWD SR Vol 1 P.No 10 - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. All kinds of soils. Depth upto 1.50 m

Item Code 1.10 of PWD SR Vol 1 P.No 7 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications

Item Code 13.43.2 PWD SR Vol 2 P.No 191 - Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means in cluding stacking of pipes to the appropriate disposal area as per direction of Engineer-in-charge. Above 40 mm nominal bore

Item Code 12.33 PWD SR Vol 5 P.No 143 - Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments

Item Code 13.13.6 Chapter 13 of PWD SR Vol 5 P.No - Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work.5.00 HP - 90 LPM @ 110 m = 10 STG Outlet Dia - 2.00