Department Of Archaeology Museum And Heritage Tender

code26 - Providing & fi ing fly proof wire gauze to windows clerestory windows & doors with SS/ M.S. Flat or as specified by conservation arachitect 15 3 mm and nuts & bolts complete. Stainless steel grade 304 wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sl No 11.29.2 Pg No 85 KPWD CSR V2 2023-24

code27 - Providing and fi ing stainless steel Grade 304 railing made of Hollow tubes channels plates cables etc. including welding grinding buffing polishing and making curvature wherever required and fitting the same with necessary stainless steel nuts and bolts complete i/c fi ing the railing with necessary accessories & stainless steel dash fasteners stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge for payment purpose only weight of stainless steel members shall be considered e cluding fi ing accessories such as nuts bolts fasteners etc. including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sl No 11.28 Pg No 85 CSR V2 2023-24

code18 - ANTIQUITY LABELS Providing and fi ing antiquity labels using 3M Vinyl printing fi ed over 3mm thick ACP boards of appro imate size 200mm 200mm which is fi ed e isting prefabricated MS frame work to achieve proper fi ity as per the drg details provided by the Conservation Architects including cost of all the materials and labours etc complete. Data Approved

code47 - Entry e it signages

code46 - Warning signages200mm 400mm

code06 - Full height display casesF1 1. Platform4500 1100 300 2. Glass cover3500 900 1600 3. Podium2700 400 1000

code14 - S51. Platform15000 1500 400 2. Podium- 1600 600 1000 2nos 600 600 1300 10nos

code36 - Teak wood wooden display racksType 3

code51 - Graphic design for signages/ brochures

code30 - Furnitures Supply and installation of furniture’s like office chairs table seating benches reception table including all necessary cost of materials tools and labour charges consumables necessary fi tures as per design requirements etc. complete for finished item of work as per design specification drawings and brand waterproof plywood of approved brand or Century Ply-Bond 710waterproof and color as directed by the Engineer in charge. Data Approved Office tableType 1

code37 - Office tableType 2

code11 - S2 1. Platform5000 1500 400 2. Podium- 1600 600 1000 1nos 600 600 1300 2nos

code28 - Flooring Works Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm average thick base of cement mortar 1 4 1 cement 4 coarse sand laid and jointed with cement slurry and pointing with white cement slurry admi ed with pigment of matching shade including rubbing curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Sl No 11.28 Pg No 85 CSR V2 2023-24

code45 - Directional signages500mm 250mm

code38 - Reception Desk

code39 - CCTV room2 seater table

code29 - Providing and laying flamed finish Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm average thick base of cement mortar 1 4 1 cement 4 coarse sand laid and jointed with cement slurry and pointing with white cement slurry admited with pigment of matching shade including rubbing curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Sl No 9.23 Pg No 63 KPWD CSR V2 2023-24

code34 - Teak wood wooden display racksType 1

code24 - Providing and fiing Steel work welded in built up sections/ framed work including cutting hoisting fi ing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings frames guard bar ladder railings brackets gates and similar works including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer-inCharge. Sl No 11.25.2 Pg No 84 KPWD CSR V2 2023-24

code15 - S61. Platform5000 1500 400 2. Podium- 1600 600 1000 1nos 600 600 1300 2nos

code21 - Providing and fi ing wooden louvered blinds as per design including cost of materials labour tools consumables etc. complete as per specifications. Data Approved

code08 - F3 1. Platform1500 1500 300 2. Glass cover1500 1500 1600 3. Podium1000 1000 500

code01 - Display Cases Providing and installation of pre-fabricated wall full height table top and sculpture display cases of different dimensions as per the design and drawing details provided by the Architects. The display case is a combination of MS frame and glass. All glass panels are of either 8mm or 10mm or 12mm thick glass or as per design requirements with e tra clear laminated safety glass polyvinyl butyral PVB for lamination of glass of 0.38mm of 4 layers with crystal edge finish. The frame work Jindal or tata shall be made of metal frame comprising of MS Sheets MS Square rectangle pipe angle or channels. MS sheets of minimum 1.00mm CRCA MS grade D as per IS 513-1994 with lasor cutting and bending in CNC bending machine as per approved design. MS pipes will be of 40 40mm with wall thickness minimum 2mm or as directed to form frame work at back side top hood and base walls. MS round pipe of 50mm dia. will be filed inside to take load of ceiling. Position and size or thickness will have to be designed for all loads as shop drawings and same has to be approved by the architect in charge. Fabrication has to be absolutely error free high engineering work and using best quality tools and equipment. All frame to be powder coated Nero lac or Asian paints shade as per approved by architect through 7 tank process of 60 to 80 micron thickness and cured under heat. Hinges will be concealed and as per international standards. All hardware and frame work details have to be submitted in shop drawing for approval. Cost Inclusive of manufacturing and transportation to site. Including cost of all materials transportation to site of work handling with all incidental charges etc. complete as directed by the site engineer in charge. Data Approved Table top display cases T1 1. Table1500 1500 800 2. Glass cover1100 1100 1200 3. Base900 900 100

code25 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer-in-charge. Sl No 8.40 Pg No 48 KPWD CSR V2 2023-24

code33 - Seating bench type 2

code23 - Providing and fi ing double glazed hermetically sealed glazing in aluminium windows ventilators and partition etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket perforated aluminium spacers desiccants sealant Both primary and secondary sealant etc. as per specifications drawings and direction of Engineer-in-charge complete including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sl No 11.52 Pg No 94 KPWD CSR V2 2023-24

code43 - Provision for purchase and installation of Desktop PC for cctv rooms av room ticketing etc. Data Approved

code50 - Graphic design works for galleries

code02 - T2 1. Table2100 1200 500 2. Glass cover800 1700 900 3. Base600 1500 100

code49 - Provision for content development and graphic design works for mesuem works. Data Approved Content Development for selected objects

code40 - Baggage lockerMedium

code41 - Baggage lockersmall

code42 - Digital and Signage works Provision for purchase and installation of medium sose 32 TV for CCTV Surveillance. Data Approved

code13 - S4 1. Platform6000 1500 400 2. Podium- 1600 600 1000 2nos 600 600 1300 2nos

code20 - Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666 500 100 mm made of calcite phosphor Gypsum fi ed with tongue and groove jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor I level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 including cost of all materials labour scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. SN 6.27 PN 16 KPWD CSR V2 2023-24

code05 - T5 1. Table5000 1000 800 2. Glass cover 2nos 1000 600 500 & 1700 600 700 3. Base 2nos 800 400 100 & 1500 400 100

code03 - T3 1. Table4900 1000 800 2. Glass cover 2nos 1000 600 500 & 1700 600 700 3. Base 2nos 800 400 100 & 1500 400 100

code48 - Provision for providing and installation of lift Otis/ Johnson in museum area including making grove in walls without damaging the adjacent area of the structures and necessary masonry works or patch works as per site condition during installations etc. complete. Data Approved

code17 - Panelling and Partition Works Providing and fi ing te t panels using 3M Vinyl printing fi ed over 3mm ACP boards which is fi ed to the e isting MS frame work or wall panels to achieve proper fi ity as per the drg details provided by the Conservation Architects including cost of all the materials and labours etc complete. Data Approved

code44 - Supplying and fi ing signages as per the drg and specification of materials provided by the conservation Architects using MS flats of 10mm thick for supporting the frame work of display unit fi ed with graphic panel digitally printed vinyl graphics/ metal printing including cost of all materials cost of steel transportation charges fi ing charges etc E cluding cost all civil work The work shall be carried out as per the detailed specifications drawings and directions of the Engineer in charge of the work. Data Approved Name boards for gallery500mm 250mm

code10 - Sculpture display cases S11. Platform7600 1500 400 2. Podium- 1600 600 1000 2nos 600 600 1300 2nos

code19 - Providing and fi ing in position curtains with thick MK fabric as per design including cost of materials stitching as per requirement labour tools consumables etc. complete as per specifications. Data Approved

code04 - T4 1. Table6000 1000 800 2. Glass cover 3nos 1000 600 500 -2nos & 1700 600 700 3. Base 3nos 800 400 100 -2nos & 1500 400 100

code31 - Office Chairs

code16 - S71. Platform4600 1500 400 2. Podium- 1600 600 1000 1nos 600 600 1300 3nos

code32 - Seating bench type 1

code35 - Teak wood wooden display racksType 2

code09 - F4 1. Platform4500 1000 100 2. Glass cover4500 2100 1000 3. Table3000 600 500