Defence Research And Development Organisation Tender

Removal of existing MS works at the front of porta cabin and disposal of the same after work away from NFTC Campus.

Kitchen Sink, Serving counter, Wash basin with granite top and underneath storage Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required of Kitchen sink with drain board. Size will be specified by Engineer in charge. Providing and fixing of White Vitreous China Wash basin size 550x400 mm with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require etc complete as per ADA instructions. Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and pre-polished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, color and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels of Granite stone slab color black, Cherry/Ruby red of Area of slab upto 0.50 sqm. Providing, fabricating & installation of wooden storage units made out of marine grade of 18mm thick ply wood, external surface finish with 01mm thick laminate and all exposed side finish with teakwood beading, internal surface finished with 02 coats of enamel paint, with standard hardware’s such as lock, C type PC handles, piano hinges, skirting, locking arrangement, etc. complete neat and attractive finish, including transportation, shifting, labour etc, and as per sample available at ADA. Make(Kitchen Sink, Wash Basin):Jaquar / Cera / Johnson / Parryware Make(Ply wood) :Archid Ply / Kit Ply / Anchor Board. Make(Laminate) : Decolite / Decolam / Archid.

Providing of acrylic emulsion paint/spray paint as required of approved shade to give an even shade with two or more coats etc complete as per ADA instructions.

Provision and fixing of 4 Seater table of size shall be 1220 mm Length x 915 mm wide x 762mm Height.Top shall be 25 mm thick base material shall be 25 mm thick solid wood of approved shade. The Under structure shall made up of 60 x 45mm solid frames. The work includes hardwares, SS machine screws and necessary hardwares.

Front and around Portion of Porta Cabin-Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand).

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by manual or mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge.

Provision and fixing of 2 Seater Round Table of size 1066mm diameter. Top shall be 25 mm thick base material shall be 25 mm thick solid wood of approved shade. The Understructure shall made up of 60 x 45mm solid frames. The work includes hardwares, SS machine screws and necessary hardwares.

Provision of dining chairs of specified size 290mm length*250mm wide*800mm height. Top shall be 25 mm thick base material shall be 25 mm thick solid wood of approved shade. The Understructure shall made up of 60 x 45mm stainless steel frames. The work includes hardwares, SS machine screws and necessary hardwares.

Providing and laying in position specified grade of reinforced cement concrete with provision of glass mixes mixed, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : M20-1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colors and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm.

Providing, fabrication and installation of Vista or Fenesta or Hunter Douglus make Manual operated Window Blinds, approved shade fabric including accessories, all as per OEM specification, etc complete as per ADA instructions. Make: Vista / Hunter Douglus / Fenesta

Dismantling tiled flooring, complete including stacking of serviceable material and disposal of unserviceable material away from campus.

Supply and fixing of laminate along with necessary hardware, channel all as per specification of OEM, etc complete and 4mm ACP cladding wherever required as per directions of Engineer-in-charge.

Welding/Modification/Fabrication works inside/outside /wherever required as directed by Engineer-In-Charge and as per ADA instructions