Davanagere Smart City Limited Tender

DVGDSCL15 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe around to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 160mm dia., 6kg/sqcm & class 3. ---- The rates are inclusive of all lead, lifts, labour, transportation, hire charges of machinery, supervision charges, overheads all etc., complete as per relevant specification and work should be carried out as per direction of engineer incharge.

DVGDSCL1 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- The rates are inclusive of all lead, lifts, labour, transportation, hire charges of machinery, supervision charges, overheads all etc., complete as per relevant specification and work should be carried out as per direction of engineer incharge.

DVGDSCL5 - Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 14:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 140 kg/ m3 , optimum moisture content to be determined during trial length construction, concrete strength not to be less than 7 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing ---- The rates are inclusive of all lead, lifts, labour, transportation, hire charges of machinery, supervision charges, overheads all etc., complete as per relevant specification and work should be carried out as per direction of engineer incharge.

DVGDSCL11 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc PVC pipes 25mm dia, 10 kg/sqcm & class 5 ---- The rates are inclusive of all lead, lifts, labour, transportation, hire charges of machinery, supervision charges, overheads all etc., complete as per relevant specification and work should be carried out as per direction of engineer incharge.

DVGDSCL2 - Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction. ---- The rates are inclusive of all lead, lifts, labour, transportation, hire charges of machinery, supervision charges, overheads all etc., complete as per relevant specification and work should be carried out as per direction of engineer incharge.

DVGDSCL10 - Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications ---- The rates are inclusive of all lead, lifts, labour, transportation, hire charges of machinery, supervision charges, overheads all etc., complete as per relevant specification and work should be carried out as per direction of engineer incharge.

DVGDSCL17 - Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- The rates are inclusive of all lead, lifts, labour, transportation, hire charges of machinery, supervision charges, overheads all etc., complete as per relevant specification and work should be carried out as per direction of engineer incharge.

DVGDSCL4 - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401. (v) For Grading -V Material ---- The rates are inclusive of all lead, lifts, labour, transportation, hire charges of machinery, supervision charges, overheads all etc., complete as per relevant specification and work should be carried out as per direction of engineer incharge.

DVGDSCL14 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc PVC pipes 110mm dia., 6 kg/sqcm & class 3 ---- The rates are inclusive of all lead, lifts, labour, transportation, hire charges of machinery, supervision charges, overheads all etc., complete as per relevant specification and work should be carried out as per direction of engineer incharge.

DVGDSCL9 - Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification ---- The rates are inclusive of all lead, lifts, labour, transportation, hire charges of machinery, supervision charges, overheads all etc., complete as per relevant specification and work should be carried out as per direction of engineer incharge.

DVGDSCL6 - Construction of un-reinforced plain cement concrete pavement using RMC M-30 grade with OPC @ 270 kg/m3 and GGBS@ 90 kg/m3 (75:25 proportion) as per approved mix design procedure and thickness as per design, over a prepared sub base. The superplastisiser confirming to IS 9103-1999 Reaffirmed-2008 ,Coarse aggregates and Fine aggregate confirming to IS:383-2016, transported to site, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work). Spreading the concrete with shovels, rackers and compacted using needle, suitable plate vibrator and finished in a continuous operation including provision of separation membrane and Hessian cloth finishing to lines and grades complete including cost of all materials, labour, all lead & lift, loading charges as per specification & direction of Engineer - incharge of the work. (Groove cutting shall be paid seperately) ---- The rates are inclusive of all lead, lifts, labour, transportation, hire charges of machinery, supervision charges, overheads all etc., complete as per relevant specification and work should be carried out as per direction of engineer incharge.

DVGDSCL7 - Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4-8 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer in charge. ---- The rates are inclusive of all lead, lifts, labour, transportation, hire charges of machinery, supervision charges, overheads all etc., complete as per relevant specification and work should be carried out as per direction of engineer incharge.

DVGDSCL16 - Repairs to Machinehole for different depths including removal of debris, levelling the brick masonry, construction of brick masonry upto Ground level, providing CC coping alround the MH cover, plastering both inside and outside to the brick masonry and fixing of manhole frame and cover,curing, refilling with appurtenances complete. Upto 0.30m depth ---- The rates are inclusive of all lead, lifts, labour, transportation, hire charges of machinery, supervision charges, overheads all etc., complete as per relevant specification and work should be carried out as per direction of engineer incharge.

DVGDSCL8 - Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight ---- The rates are inclusive of all lead, lifts, labour, transportation, hire charges of machinery, supervision charges, overheads all etc., complete as per relevant specification and work should be carried out as per direction of engineer incharge.