Chamundeshwari Electricity Supply Corporation Limited Tender
... More
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 84,700Document Cost
Refer DocumentsTender Fee
₹ 2,120
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
CESCOM/2025-26/BD/WORK_INDENT251Tender No
CESCOM/2025-26/BD/WORK_INDENT251Tender Authority
Chamundeshwari Electricity Supply Corporation Limited ViewPurchaser Address
-Website
http://http://www.cescmysore.org/en/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
code079 - Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.(V-2,P-136,I-14.31)
3
1220
3660
... More
code062 - Supply of ISI mark 175mm nominal bore,plain and steel casing pipegrade of steel Fe 410 of wall thickness conforming to IS 4270-2001 andlatest ammendments, electrical resistance welded steel tubes, materialand conforming to IS 1387-1993 and manufactured by basic openhearth electric or basic oxygen process in random length of 5-7mbothends.threaded conforming to IS 554-1985 one end fixed with socketconforming to IS 4270-2001 and the other end with screwed pipes allshall be responsibaly free from defects. The tubes shall be responsiblestraight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. (V-5,P-143,I-12.32)
60
1933
115980
... More
code111 - 18 Module (V-6,P-8,I-3.5.8)
4
457
1828
... More
code052 - SS Aldrop 16mm dia, 200mm(V-2,P-218,I-22.15.3)
7
300
2100
... More
code007 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(V-2,P-9,I-5.4)
78
6389
498342
... More
code018 - Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.(V-2,P-86,I-11.34B)
274
183
50142
... More
code047 - Providing and installing of pre painted Galvolume iron Trapezoidal profiled sheet of approved make 1060 mm width (1000 mm cover width), 28-30 mm crest height with crest distance of 200 mm c/c with 2 ribs at the centre for stiffening. The total coated thickness (TCT) of the sheet will be 0.47 mm +/- 0.02 mm tolerance Zinc-Alu Alloy coating AZ150 gsm as per ASTM 1397/A755-550 mpa steel grade. 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling/self tapping screws of 25 mm length, to be fixed over the existing purlins, rafters, channels and trusses.(SR 18-19, P 300, I -38.30)
125
688
86000
... More
code073 - Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25 mm nominal bore(V-2,P-117,I-13.4.1)
3
549
1647
... More
code032 - Providing lime rendering for plastering to wall and ceiling , including cost of materials, labour, curing complete as per specifications (SR 18-19, P-115, I-15.33)
634
32
20288
... More
code010 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(V-2, P-13,I-6.3)
80
8874
709920
... More
code125 - Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the mter board using 40mm dia 2.90mm thick GI pipe 2.5metr long buried in a pit. The pit should be filled with equal proprotion of salt and charcoal 150mm alround the pipe to complete depth.The connection from the pipe to hte conduit etc,is to be established through GI wire of size as per ISI specifications 7.3.3 of IS 732 using 12mm dia bolts,nuts,washers and checknuts etc, the pipe shall have 16 through holes of 12mm dia (V-6,P-54,I-12.56)
5
3510
17550
... More
code051 - Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Handles 300mm(V-2,P-218,I-22.15.2)
7
550
3850
... More
code066 - Proviiding and fixing 1 HP water pump as per the directions of the Engineer in charge of the work.(MR)
1
10000
10000
... More
code044 - Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(V-2,P-47,I-8.34.1)
15
53
795
... More
code123 - Supplying and fixing miniature circuit breakers on exisiting MCB distribution boards using necessary fixing materials and 'C' Type curve,indicator ON/OFF,energy cross-3 with short circuit breaking capacity breaking capacity of 10K and complete wiring as required 6-32 Amps Sp (V-6,P-17,I-5.18.1)
3
415
1245
... More
code049 - Supplying, fixing of display board with logo, the material background should be of aluminium composite panel(ACP) and the words/Logo sould be of sunboard PVC make and coated. with all lead and lift charges & as directed by engineer in charge. (MR)
1
65000
65000
... More
code024 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-chargeInternal Walls(V-2,P-41,I-8.2.1) Internal Walls
428
295
126260
... More
code055 - SS Door stopper 75mm(V-2,P-219,I-22.15.10)
7
100
700
... More
code063 - Providing and fixing cap (V-5,P-143,I-12.34)
1
164
164
... More
code027 - Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ ing cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge(V-2,P-41,I-8.1.1) Ceiling
206
255
52530
... More
code060 - 150.00 mtrs up to 200 mtrs.(V-5,P-139,I-12.1.4)
50
572
28600
... More
code067 - Labour charges for Erection, Electrification and commissioning of Pumpsets, including aligning and balancing of all items including supply anderection of two pair of supporting clamps, bore well caps, cable clips andwater tight gland cable protectors, bolts, nuts, valve and gauges,tools andequipments etc., involved in the job as per specifications, with necessarytests as per specifications, with testing of as per instructions of engineer incharge of work (V5,P-156,I-13.32)
1
6500
6500
... More
code075 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps(V-2,P-132,I-14.7.1)
3
3082
9246
... More
code039 - Mix 1:5:10 Using 40 mm nominal size graded crushed coarse aggregates(V-1,P-15,I-2.1.1)
40
5338
213520
... More
code019 - Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications(V-2,P-99,I-12.12)
0.6
124202
74521.2
... More
code080 - Providing and fixing to wall, ceiling and floor, high density polyethylene pipes 6.00 kgf/sq.cm working pressure 32mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. (SR 18-19, P-96, I-13.71) 32mm
24
235
5640
... More
code085 - Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Premium(V-2,P-139,14.54b)
3
1918
5754
... More
code074 - Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 600X850 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc.(V-2,P-127,I-13.55)
5
7401
37005
... More
code042 - Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand papersmooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(V-2,P-45,I-8.29)
90
283
25470
... More
code092 - Long point above 6 Mtrs Upto 10 Mtrs from tapping point to outlet via switch (V-6,P-5,I-2.1.3)
5
570
2850
... More
code118 - 32 Amps DP switch (V-6,P-9,I-3.6.9)
5
326
1630
... More
code040 - Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge(V-2,P-45,I-8.27)
634
53
33602
... More
code114 - 4 Sqmm (V-6,P-5,I-2.3.4)
270
63
17010
... More
code038 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:2:4 Using 40 mm nominal size graded crushed coarse aggregates(V-1,P-15,I-2.1.5)
15
6156
92340
... More
code023 - Providing and fixing flush door shutter made out of solid core blockboard type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alrounddoor shutters covered with cross bonded wooden sheets ( core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 ( part-I) 1991. from manufacturer complete as per spcification.do- 30 mm thick Both side teak(V-2,P-105,I-12.57.1)
12
4043
48516
... More
code110 - 16 Module (V-6,P-8,I-3.5.7)
6
397
2382
... More
code036 - Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rub bing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :
** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent(V-2,P-63,I-9.23)
25
2466
61650
... More
code002 - Earth work excavation for Foundation by manual means for all Buildings, Bridges, Retaining walls, Abutment Piers and such similar works as per drawing and technical Specifications, including setting out, pro viding shoring & strutting,barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work(V1,P-5,I-1.4.1)
483
242
116886
... More
code016 - Chejjas, Canopy & Other Architectural projections of minor sections
4
9116
36464.6
... More
code100 - 3 to 4 Way (V-6,P-3,I-1.6.7)
10
47
470
... More
code069 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm dia(V-2 P-122,I-13.32.2)
140
379
53060
... More
code001 - Earth work in surface excavation for stripping, seating of bund, Road way by manual means for lowering & levelling the ground for all works other than foundation & depth in Ordinary rock and soft rock upto 300mm depth as per drawing and technical specifications, including setting out, barricading, caution lights, including dressing of excavat ed surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work (V1,P-5,I-1.2)
95
575
54625
... More
code057 - Sinking borewell of 165mm diameter clear using superfast hydraulic rig of capacity 250 PSIG and above 900 CFM and above in all strata including over burden upto 20m fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc. Complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding the cost of casing pipes, collars, and cap etc) (V-5,P-139,I-12.1)
0.00 to 50.00 M. (V-5,P-139,I-12.1.1)
50
370
18500
... More
code082 - Providing and fixing Bib cock Two way with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Premium(V-2,P-140,I-14.56b)
3
3312
9936
... More
code104 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module (V-6,P-8,I-3.5.1)
6
137
822
... More
code124 - Supplying and fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts,bolts and washres etc., complete.32 amps (V-6,P-14,I-5.7.2)
3
241
723
... More
code097 - 8 x 6" x 3" (203 x 152 x 76 mm) (V-6,P-3,I-1.6.4)
10
86
860
... More
code034 - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications(V-2,P-104,I-12.51)
7
1016
7112
... More
code095 - 12 x 9" x 3" (300 x 228 x 76 mm) (V-6,P-3,I-1.6.2)
10
115
1150
... More
code086 - Providing and fixing gun metal non- return valve of approved quality (screwed end) 65 mm nominal bore (V-2,P-118,I-13.6.5.1)
1
2396
2396
... More
code064 - Providing Submersible Pump Set of 150mm dia suitable for bore well andconfirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low voltMotor as per specifications, to work site as per necessary ammendmentsand instructions of engineer incharge of work and latest amendments 3.00 HP - 90 LPM @ 66 m = 10 STG Outlet Dia - 2.00" (V-5,P-151,I-13.11.5)
1
28113
28113
... More
code109 - 10 -12 Module (V-6,P-8,I-3.5.6)
6
344
2064
... More
code068 - Providing, laying and jointing HDPE pipes of specified grade andconforming to IS 4984-2016 with latest ammendments and conveyingto work site including loading and unloading at both destinations androlling and lowering into trenches, laying true to line and jointing ofpipes and specials with electrofusion welding, giving hydraulic testas per relevant ISS with all lead and lifts including encasing the pipealround to a depth of not less than 15 cms. with soft gravel or selectedearth available from the excation, testing and commissioning. Therate is exclusive of required specials and fittings wherever necessarylike saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete(Contractor will make his own arrangements for procuring water fortesting) etc. complete For :HDPE Grade PE80-PN16.0, 63mm dia (V-5,P-98,I-9.5.1)
151
327
49377
... More
code053 - SS Tower Bolts 150x10mm(V-2,P-219,I-22.15.5)
14
120
1680
... More
code116 - Supplying and fixing of modular switch/socket/stepped electronic regulator/dimmer/telephone socket etc on existing modular switch plate. (a) 6 Amps 3 way socket (V-6,P-9,I-3.6.3)
36
171
6156
... More
code004 - Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications(V1,P-11,I-1.23)
10
2682
26820
... More
code117 - stepped fan regulator (V-6,P-9,I-3.6.4)
24
357
8568
... More
code087 - Electrical Works:Supplying heavy gauge PVC conduit pipe ……mm dia .......
mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20mm thick (V-6,P-2,I-1.2.1)
100
66
6600
... More
code119 - TV/Telephone Socket (V-6,P-9,I-3.6.11)
2
156
312
... More
code127 - Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low conductor resistance confirming to table 3class 5of IS:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100Volts with specified IS-694:1990 & confirming to the attached (12/2.10) GTP of GROUP-A 3C x 4.0Sqmm (V-6,P-7,I-2.6.2)
180
168
30240
... More
code043 - Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge(V-2,P-46,I-8.31)
850
178
151300
... More
code120 - 6Amps 2 Way Switch (V-6,P-9,I-3.6.2)
10
166
1660
... More
code115 - 1.0 Sqmm (V-6,P-5,I-2.3.1)
270
19
5130
... More
code028 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge(V-2,P-41,I-8.2.2) Rough Plastering for Dado
50
295
14750
... More
code046 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(V-2,P-82,I-11.16.2)
666
147
97902
... More
code094 - Supplying and flush mounting teak wooden box without front plank,made of not less than 12 mm thick wood, after due groove cutting,finishing with necessary cement plastering complete.12" x 12" x 3" (300 x 300 x 76 mm) (V-6,P-3,I-1.6.1)
2
120
240
... More
code048 - Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge (V-2,P-63,I-9.25)
60
800
48000
... More
code013 - Columns and Piers
20
10687
213758
... More
code081 - Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Premium(V-2,P-138,I-14.48b)
3
2615
7845
... More
code061 - 200.00 mtrs up to 250 mtrs. (V-5,P-139,I-12.1.5)
10
671
6710
... More
code071 - 32 mm dia(V-2,P-122,I-13.32.4)
40
557
22280
... More
code065 - Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., complete as per specification, with testing of as per instructions of engineer incharge of work (V-5,P-156,I-13.34)
1
1450
1450
... More
code054 - Supply and fixing of Door Bush(Market Rate)
7
75
525
... More
code033 - Providing and applying white cement based putty of average thick ness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge(V-2,P-50,I-8.51)
634
100
63400
... More
code037 - Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polish ing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge(V-2,P-85,I-11.28)
79
565
44635
... More
code113 - 2.5 Sqmm (V-6,P-5,I-2.3.3)
300
42
12600
... More
code102 - Supplying and fixing PVC/metal conduit Deep junction box 19/20mm deep junction box (V-6,P-2,I-1.5.1)
10
49
490
... More
code096 - 10 x 7" x 3" (254 x 178 x 76 mm) (V-6,P-3,I-1.6.3)
10
112
1120
... More
code077 - Providing and fixing to wall, ceiling and floor, high density polyethylene pipes 6.00 kgf/sq.cm working pressure 140mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. (SR 18-19, P-94, I-13.73.6) 140mm
20
741
14820
... More
code035 - Fixing of window frame in an existing opening including embedding framein floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries withlead upto 50 m. including cost of materials, labour charges, complete as per specifications(V-2,P-104,I-12.52)
7
773
5411
... More
code025 - Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge(V-2,P-41,I-8.3.1) Outside Walls
936
354
331344
... More
code078 - Providing and laying and jointing rain down water PVC pipe of 110mm dia, 4.00kg/sqcm of pressure including cost of materials, fixtures, labour charges complete as per specifications. (SR 18-19, P-47, I-8.19)
25
512
12800
... More
code050 - Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete 125x70x4 mm (ordinary type)(V-2,P-200,I-20.34.1)
28
170
4760
... More
code101 - 5 to 6 Way (V-6,P-3,I-1.6.8)
10
51
510
... More
code108 - 8 Module (V-6,P-8,I-3.5.5)
6
284
1704
... More
code103 - 25mm deep junction box (V-6,P-3,I-1.5.2)
10
56
560
... More
code105 - 3 Module (V-6,P-8,I-3.5.2)
6
161
966
... More
code021 - Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(V-2,P-78, I.11.6.1)
8
2633
21064
... More
code011 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works ofbridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm and down size graded crushed coarse aggregates(FoundationUp to Plinth)(V-1,P-15,I-2.2.1)
90
6475
582804.9
... More
code017 - Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation/Substructure/Superstructure complete as per Drawing and Technical Specifications. (V-1,P-18, I-2.11(a))
17
89457
1520769
... More
code126 - Supply and fixing of Panel Board for 2 meters(Market Rate)
1
4500
4500
... More
code014 - Beams and Lintels of Buildings
15
10059
150888
... More
code003 - Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 ltr/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications.(V1,P-5,I-4.1)
159
118
18762
... More
code093 - Supplying And Fixing Metal Fan Box with Round Hook.(V-6,P-4,I-1.13)
6
117
702
... More
code005 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm and down size graded crushed coarse aggregates (V-1,P-15 I-2.1.3)
120
5989
718680
... More
code026 - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge(V-2,P-149-I-15.1)
180
817
147060
... More
code056 - Geophysical investigation site for sinking borewell for supplying drinking water to the habitation either through the handpump, MWS, PWS by vertical electrical sounding by adopting venner or schiumbrger's method, including reconnaissance survey of geolegical formation, geophysical investigation of ensisting ground water in the vicinity, indicating the location of site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0mtrs in consolidated formation for proper scaling of casing pipe, depth of drilling required to cover full depth of aqifier proposed to be tappes, probable yield and other information requierd including transporation of instrument and accessories to work site, engaging i technical person and labour required etc.., (V-5,P-140,I-12.4)
1
5288
5288
... More
code059 - 100.00 mtrs up to 150 mtrs. (V-5,P-139,I-12.1.3)
50
493
24650
... More
code015 - Roof(Straight & Arched)
32
9430
301776
... More
code090 - Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using copper PVC insulated multistrand 2X1.5 Sqmm copper wire with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood /PVC round block complete for each outlet (P-3;I-8) (a) Short point up to 3 Mtrs from tapping point to outlet via switch (V-6,P-5,I-2.1.1)
18
285
5130
... More
code041 - Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of ap proved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge.(V-2,P-50,I-8.53.2)
634
99
62766
... More
code112 - Wiring for lighting/power circuit using one of PVC insulated 1100V grade,multistrand Copper conductor single core cable in open or concealed system of wiring (a) 1.5 Sqmm (V-6,P-5,I-2.3.2)
450
26
11700
... More
code029 - Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).. Size of Tile 800x800 mm(V-2,P-62,I-9.21.3)
107
1351
144557
... More
code098 - 4 x 4" x 3" ( 101 x 101 x 76 mm) (V-6,P-3,I-1.6.5)
10
74
740
... More
code084 - Supply and Fixing of Health Faucet(Market Rate)
3
1500
4500
... More
code107 - 6 Module (V-6,P-8,I-3.5.4)
6
234
1404
... More
code022 - Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer)and lead free, gaskets -grey colour having isolated drainage and rein forced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 50mm width x 2mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with Gi reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock.(V-2,P-109,I-12.86)
13
5390
70070
... More
code012 - Foundation Sub Structure Plinth Beam
23
9430
216901.5
... More
code076 - Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid(V-2,P-131,I-14.3.1)
3
5977
17931
... More
code031 - Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.(V-2,P-65,I-9.39)
45
1449
65205
... More
code072 - Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.(V-2,P-123,I-13.34)
1000
9
9000
... More
code088 - 25mm dia 2mmThick (V-6,P-2,I-1.2.2)
50
78
3900
... More
code008 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m(P-7,I-1.9)
59
266
15694
... More
code122 - Supplying capacitor type ceiling fan complete with down rod blades,shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system 48" Sweep (1200 mm) Regular model (V-6,P-30,I-6.3.1)
3
2984
8952
... More
code070 - 25 mm dia(V-2,P-122,I-13.32.3)
60
477
28620
... More
code091 - Medium point above 3 Mtrs Upto 6 Mtrs from tapping point to outlet via switch (V-6,P-5,I-2.1.2)
5
394
1970
... More
code083 - Providing and fixing Towel rail 450mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Premium(V-2,P-144,I-14.88b)
3
2714
8142
... More
code058 - 50.00 mtrs up to 100 mtrs. (V-5,P-139,I-12.1.2)
50
464
23200
... More
code099 - 1 to 2 Way (V-6,P-3,I-1.6.6)
10
43
430
... More
code006 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separatelyMix 1:3:6 (M10) Using 20 mm and down size graded crushed coarse aggregates (V-1,P-15 I-2.1.4)
20
6217
124340
... More
code020 - Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(V-2,P-77,I-11.3)
8
8276
66208
... More
code089 - Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50 mm conduit in brick wall (V-6, P-3,I-1.7.1)
100
29
2900
... More
code121 - 6Amps one way Switch (V-6,P-9,I-3.6.1)
60
102
6120
... More
code030 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete.(V-2,P-60,I-9.9)
45
1076
48420
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%