Central Food Technological Research Institute Tender

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks

Providing and fixing tiled False Ceiling of approved materials of size 600x600 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanized @ 170 gsm/sqm) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x32mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T"at 600mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.3mm and laying false ceiling tiles of approved texture in the grid including, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications drawings and as directed by Engineer-in-Charge. 9 mm thick square edge PVC Laminated Gypsum Tile of size 600x600 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. The tiles should have Thermal Conductivity k = 0.24 w/m k, Colour white, Fire performance Class 0/Class1 (BS 476 Part 6&7) in module size of 600 x 600 x 9 mm MAKE: ARMGYP DEW DROPS (ARMSTRONG)

Providing and fixing factory made PVC door frame made of PVC extruded section of profile size 42X48mm having an overall dimension (tolerance ± 1mm) with wall thickness 2.0mm (± 0.2mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded and 3 nos. staineless steel hinges fixed to the frame for door shutter complete as per manufacturers specification including 24mm thick factory made single/multi panel PVC door shutter reinforced with excellent polymeric reinforcement, shall be water proof, termite proof quality including fixing 2 nos of good quality powder coated aluminium aldrops and 2 nos PVC handles of 150mm length complete as per the manufacturers specification and direction of Engineer-in-charge. (For WC and bath room door shutter) Make : Sintex, Maruthi or its equivalent

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Providing and fixing Asbestoes cement roof capping on existing asbestos cement sheet roof including all fixtures like washers, J-bolts, j-hooks, screws, nuts, bolts etc. at all heights upto 5 floors level. Rate is inclusive necessary scaffolding to carryout the work at all heights. Size of capping is 0.60 widex 5mm thick (or nearest size) matching existing corrugation of sheet Make: Everest or similar

Providing and fixing brass heavy duty gate valve with approved quality 25 mm nominal bore Make: ONIDA or its equivalent

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste coupling and 40mm C.P. brass tap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm

Providing, laying and jointing PVC pipes of 6 kgf/ sq.cm pressure capacity including testing of joints etc., complete 110 mm diameter Make: ASTRAL, SUPREME

Providing and fixing CP Coated Brass Angle cock 15 mm Make: ONIDA or its equivalent

Providing and fixing of SWR nahani trap 100 mm dia including adhesive complete Make: Ashirwad / finolex or its equivalent

Providing and fixing 100 mm SS grating Make: ONIDA or its equivalent

Providing and fixing of ACP sheet in position (4 mm thick) over the aluminium frame work including all kinds of nuts, bolts, tools & tackles etc,.as directed by engineer incharge. Make: ALSTONE/ Flexibond

Providing and fixing P.V.C waste pipe for sink or wash basin or urinals including P.V.C waste fittings complete. Semi rigid pipe 40 mm dia Make: KOHINOOR, ONIDA or its equivalent

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) Make: JINDAL

Providing and fixing CP coated brass two way bib cock 15mm dia Make: ONIDA or its equivalent

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 M sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 M sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 M sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 M sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S.(non modular) bricks of class designation 5.00