Bruhat Bengaluru Mahanagara Palike Tender

item004 - Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for: For 50 mm dia GI elbow (BWSSB CSR 2023-24, Item No.11.7.6 Pg No:129, Volume No.V )

item005 - Supply and delivery at site wrought middle steel (galvanized) GI hexagonal nipple confirming to IS 1239-II, 1991 with latest amendments if any For 50 mm dia GI hexagonal nipple (BWSSB CSR 2023-24, Item No.11.14.6 Pg No:132, Volume No.V )

item006 - Providing wrought mild steel (galvanized) GI collar confirming to IS 1239-II, 1991 with latest amendments if any For 50 mm dia GI collar: (BWSSB CSR 2023-24, Item No.11.6.6 Pg No:129, Volume No.V )

item007 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A TPN (KPTCL CSR 2023-24,Volume No.VI, Page No: 17, Item No.5.18.7)

item008 - Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400/440 V 3 phase and wired after fixing to the existing wooden board for motor upto 12.5 HP (KPTCL CSR 2023-24,Volume No.VI, Page No: 14, Item No. 5.2.1 )

item009 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010. I Group A 4sq mm (KPTCL CSR 2023-24, Volume-VI, P. No.5, Item No: 2.3.4)

item010 - Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50m (KPWD CSR-2023-24, Volume-1, Item No.1.6.1, Page No.6)

item011 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 (KPTCL CSR 2023-24, Volume No.VI, Page No.13, Item No.32.03)

item012 - Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete. Medium Duty GI pipe of 50mm dia (BWSSB, CSR 2023-24, Item No.11.2.6 Page No:127, Volume-V)

item013 - Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work and all other appurtenances to complete in the following strata. Ordinary/soft rock (without requiring blasting) Depth upto 1.50 m (KPWD CSR 2023-24, Volume-I, P.No: 10, I.No: 1.19)

item014 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc.Complete For: PVC pipes 75mm dia., 6 kg/sqcm & class 3 (BWSSB CSR 2023-24, Volume-V, P.No:113, I.No: 10.1.5)

item015 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications (KPWD CSR 2023-24, Volume I P.No 7 I.No 1.10)

item016.1 - Rewinding of submersible pumpset with copper winding wires of bappropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and testing. for all types of submersible pumpsets etc.(with guarantee period not less than 6 months) - For all types of submersible pumpsets above 5.0 HP and upto 5.5 HP (BWSSB CSR 2023-24,Volume-V, P.No: 13.1.1)

item016.2 - Rewinding of submersible pumpset with copper winding wires of bappropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and testing. for all types of submersible pumpsets etc.(with guarantee period not less than 6 months) - For all types of submersible pumpsets above 5.5 HP and upto 6.0 HP (BWSSB CSR 2023-24,Volume-V, P.No: 13.1.2)

item016.3 - Rewinding of submersible pumpset with copper winding wires of bappropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and testing. for all types of submersible pumpsets etc.(with guarantee period not less than 6 months) - For all types of submersible pumpsets above 6.0 HP and Up to 6.5 HP (BWSSB CSR 2023-24,Volume-V, P.No: 13.1.3)

item016.4 - Rewinding of submersible pumpset with copper winding wires of bappropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and testing. for all types of submersible pumpsets etc.(with guarantee period not less than 6 months) - For all types of submersible pumpsets above 6.5 HP and Upto 7.0HP (BWSSB CSR 2023-24,Volume-V, P.No: 13.1.4)

item016.5 - Rewinding of submersible pumpset with copper winding wires of bappropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and testing. for all types of submersible pumpsets etc.(with guarantee period not less than 6 months) - For all types of submersible pumpsets above 7.0 HP and Upto 7.5HP (BWSSB CSR 2023-24,Volume-V, P.No: 13.1.5)

item016.6 - Rewinding of submersible pumpset with copper winding wires of bappropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and testing. for all types of submersible pumpsets etc.(with guarantee period not less than 6 months) - For all types of submersible pumpsets above 7.5 HP and Upto 8.0HP (BWSSB CSR 2023-24,Volume-V, P.No: 13.1.6)

item016.7 - Rewinding of submersible pumpset with copper winding wires of bappropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and testing. for all types of submersible pumpsets etc.(with guarantee period not less than 6 months) - For all types of submersible pumpsets above 8.0 HP and Upto 8.5HP (BWSSB CSR 2023-24,Volume-V, P.No: 13.1.7)

item016.8 - Rewinding of submersible pumpset with copper winding wires of bappropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and testing. for all types of submersible pumpsets etc.(with guarantee period not less than 6 months) - For all types of submersible pumpsets above 8.5 HP and Upto 9.0HP (BWSSB CSR 2023-24,Volume-V, P.No: 13.1.8)

item016.9 - Rewinding of submersible pumpset with copper winding wires of bappropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and testing. for all types of submersible pumpsets etc.(with guarantee period not less than 6 months) - For all types of submersible pumpsets above 9.0 HP and Upto 9.50HP (BWSSB CSR 2023-24,Volume-V, P.No: 13.1.9)

item016.10 - Rewinding of submersible pumpset with copper winding wires of bappropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and testing. for all types of submersible pumpsets etc.(with guarantee period not less than 6 months) - For all types of submersible pumpsets above 9.5 HP and Upto 10.0HP (BWSSB CSR 2023-24,Volume-V, P.No: 13.1.10)

item017 - Replace the components of motor parts of submersible pump sets, items requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments and testing etc and wtih guarantee/ warranty for one year for: The STATOR of motor 4 to 5 H.P (BWSSB CSR 2023-24, Volume-V, P-148 I.No.13.3.3 )

item018 - Replace the components of motor parts of submersible pump sets, items requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments and testing etc and wtih guarantee/ warranty for one year for: The ROTOR motor 4 to 5 H.P (BWSSB CSR 2023-24, Volume-V, P-148 I.No.13.3.6 )