Bangalore Metro Rail Corporation Limited Tender

FL08 - SITC of DMX isolator/splitter with optically isolated signal output, providing 8 DMX outputs from a single DMX input, operating on input voltage AC 110 to 220V, 50Hz device features include group wise signal distribution (Group 1 and Group 8) for efficient DMX signal management and isolation. ---- A certificate of demonstration participation as outlined in Annexure-VII duly signed by the BMRCL Officer / Engineer in charge must be enclosed with the bid submission. Bids without this certificate shall be summarily rejected.

FL14 - Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with PVC accessories on wall / ceiling as per specification No: WG- MA/CON ( 1-2-5 ) ( 2022-23 ) ---- A certificate of demonstration participation as outlined in Annexure-VII duly signed by the BMRCL Officer / Engineer in charge must be enclosed with the bid submission. Bids without this certificate shall be summarily rejected.

FL11 - SITC of programming services related to permanent decorative illumination, including the cost and conveyance of all materials, labour, and all incidental charges required for the successful execution and completion of the work, in full compliance with standard specifications and as directed by the Engineer-in-Charge. ---- A certificate of demonstration participation as outlined in Annexure-VII duly signed by the BMRCL Officer / Engineer in charge must be enclosed with the bid submission. Bids without this certificate shall be summarily rejected.

FL06 - SITC of sub Power Distribution Board (PDB) fabricated from MS sheet metal with black powder-coated finish, equipped with ivory connectors for internal terminations and external outgoing connections, and fitted with suitably sized fibre/brass cable glands; the board shall include MCB controls for outgoing circuits comprising 2 Nos. of 16A TPN outgoing MCBs and 1 No. of 32A TPN incoming MCB. ---- A certificate of demonstration participation as outlined in Annexure-VII duly signed by the BMRCL Officer / Engineer in charge must be enclosed with the bid submission. Bids without this certificate shall be summarily rejected.

FL20 - Contractor’s Overheads: To cover all indirect costs including site setup, administration, supervision, insurance, transport and temporary facilities. Calculated at 15% of the subtotal of items 1 to 19. ---- A certificate of demonstration participation as outlined in Annexure-VII duly signed by the BMRCL Officer / Engineer in charge must be enclosed with the bid submission. Bids without this certificate shall be summarily rejected.

FL10 - SITC of DIN rail mount DMX controller capable of managing a wide range of DMX-compatible systems including RGB/RGBW lighting, advanced moving lights, color mixing luminaires, DMX-based audio players, and fountain controls. The controller supports remote operation via iPhone/iPad/Android devices, integrated Wi-Fi functionality, dry contact port triggering, and onboard flash memory. Key features include: USB connectivity, support for up to 2048 DMX channels (live mode via computer), 8 dry contact trigger ports via HE10 connector, standalone mode with up to 5 zones and over 90 scenes, compatibility with Mac OS X 10.6/10.7/10.8 and Windows XP/Vista/7/8 (32/64-bit), interfaces including XLR3, mini USB, and HE10, and operates on 5V to 5.5V DC power supply (optional AC/DC adapter available). ---- A certificate of demonstration participation as outlined in Annexure-VII duly signed by the BMRCL Officer / Engineer in charge must be enclosed with the bid submission. Bids without this certificate shall be summarily rejected.

FL05 - SITC of IP65-rated 5-pin XLR male and female connectors with 5-pole cable connection, featuring improved latch mechanism, cage-type contacts, "solder stop" for easier soldering, and an additional ground contact to ensure optimal contact integrity between chassis and cable connectors; constructed with a more durable housing for enhanced reliability. ---- A certificate of demonstration participation as outlined in Annexure-VII duly signed by the BMRCL Officer / Engineer in charge must be enclosed with the bid submission. Bids without this certificate shall be summarily rejected.

FL03 - SITC of PVC-insulated, multi-core, unarmoured flexible power cable of size 3C x 2.5 sq.mm, featuring low electrical losses and high conductivity, constructed with bright annealed multi-strand copper conductors, suitable for voltage grade up to 1100V, with round PVC sheathing, conforming to relevant IS specifications. ---- A certificate of demonstration participation as outlined in Annexure-VII duly signed by the BMRCL Officer / Engineer in charge must be enclosed with the bid submission. Bids without this certificate shall be summarily rejected.

FL12 - SITC of PVC-insulated, multi-core, armoured flexible power cable of size 4C x 4 sq.mm, designed for low electrical losses and high conductivity, comprising bright annealed multi-strand aluminium conductors with round PVC sheathing, suitable for operation at voltage grades up to 1100V, to be supplied and installed as per actual site requirements and conditions. ---- A certificate of demonstration participation as outlined in Annexure-VII duly signed by the BMRCL Officer / Engineer in charge must be enclosed with the bid submission. Bids without this certificate shall be summarily rejected.

FL01 - Supply, installation, testing, and commissioning of high-quality long-throw RGBW multi-color wash light fixture with IP66 protection rating, compliant with BIS standard IS 10322 Part 5 Sec 1 2012 and CE certified as per EN 60598-1 2015 Low Voltage Directive and EN 61547 2009 EMC Directive. The fixture shall feature an adjustable wall-mount yoke, 100W power consumption, RGBW correlated color temperature as per approved design, PMMA optics with holder, selectable beam angles of 25, 45, or 60 degrees, DMX512 control with 4 channels, die-cast or extruded aluminium body with embossed manufacturer logo, integrated driver or decoder compartment, and optics designed to minimize hot spots and fringing for optimal color mixing. It shall operate on AC 110 to 230V input voltage, include inbuilt surge protection ranging from 2KV to 4KV extendable as required, IK05 rated toughened transparent glass, chemical 3 or 7 tank treated and powder-coated finish in black, ash, or other approved color. The fixture shall function in an operational temperature range of 0 to 50 degrees Celsius and have a minimum LED life of 50000 hours at L70 25 degrees Celsius. It shall include integral male and female waterproof connectors with pre-wired structures as per IS standards, 1.6 mm thick PCB with 35 micron copper, 2W TC, black or white solder mask, and copper or OSP finish. The light shall be certified to LM79, IK05, IP66, and HV standards by NABL-accredited laboratories and use LEDs from CREE, Lumileds, Osram, Seoul, Nichia, or equivalent as approved by the engineer or third-party inspection. Each fixture shall be equipped with power and DMX loop in or out cables not less than 400 mm in length. ---- A certificate of demonstration participation as outlined in Annexure-VII duly signed by the BMRCL Officer / Engineer in charge must be enclosed with the bid submission. Bids without this certificate shall be summarily rejected.

FL02 - SITC of PVC-insulated, multi-core, unarmoured flexible power cable of size 3C x 1.5 sq.mm, featuring low electrical losses and high conductivity, constructed with bright annealed multi-strand copper conductors, suitable for voltage grade up to 1100V, conforming to IS:1554 (Part 1), with round PVC sheathing, and approved makes such as Polycab, Finolex, RR Kabel, or KEI. ---- A certificate of demonstration participation as outlined in Annexure-VII duly signed by the BMRCL Officer / Engineer in charge must be enclosed with the bid submission. Bids without this certificate shall be summarily rejected.

FL13 - SITC of DMX 512 Unique program loader with programming possiblity of multiple lights together in a loop ( RA FACADE DECORATIVE -19- 15-2023/24 ) ---- A certificate of demonstration participation as outlined in Annexure-VII duly signed by the BMRCL Officer / Engineer in charge must be enclosed with the bid submission. Bids without this certificate shall be summarily rejected.

FL16 - Supplying and laying 50 mm outer diameter double wall corrugated DWC HDPE pipes for underground cable enclosure, including excavation up to a depth of 90 cm with suitable width below ground or road surface, laid to the required depth and alignment, complete in all respects as per specification number 7-6-9 of 2022-23. ---- A certificate of demonstration participation as outlined in Annexure-VII duly signed by the BMRCL Officer / Engineer in charge must be enclosed with the bid submission. Bids without this certificate shall be summarily rejected.

FL18 - SITC of GI cage for lighting protection, fabricated from galvanized iron mesh with a rear openable door equipped with suitable hinges, provision for secure light fixture mounting using bolting arrangement, and supported on a base concrete foundation, complete in all respects. ---- A certificate of demonstration participation as outlined in Annexure-VII duly signed by the BMRCL Officer / Engineer in charge must be enclosed with the bid submission. Bids without this certificate shall be summarily rejected.

FL19 - Providing and fixing of 25mm stainless steel (SS) flexible pipe complete with all necessary accessories, fittings, and supports for proper installation, as required. ---- A certificate of demonstration participation as outlined in Annexure-VII duly signed by the BMRCL Officer / Engineer in charge must be enclosed with the bid submission. Bids without this certificate shall be summarily rejected.

FL04 - SITC of 5-core DMX cable comprising twisted pairs with shielding for effective data transmission, suitable for connecting lighting consoles and fixtures operating on the DMX512 standard protocol. ---- A certificate of demonstration participation as outlined in Annexure-VII duly signed by the BMRCL Officer / Engineer in charge must be enclosed with the bid submission. Bids without this certificate shall be summarily rejected.

FL15 - Supplying, erecting, and terminating FR XLPE insulated 1100V grade 4 core 10 sqmm aluminum conductor cable with galvanized steel strip armoring, complete with suitable accessories and workmanship as required. ---- A certificate of demonstration participation as outlined in Annexure-VII duly signed by the BMRCL Officer / Engineer in charge must be enclosed with the bid submission. Bids without this certificate shall be summarily rejected.