All India Institute Of Speech And Hearing Tender

Removing of existing old sanitary and plumbing pipelines, stacking and disposing it with all cost and conveyance, labour for all items of work, HOM of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification and directions of the engineer-in-charge.

Dismantling plastering and removing the debris with a lead upto 200m. including cost of materials, labour, HOM complete as per specifications

Dismantling cement concrete flooring or plain cement concrete work including removing and conveying the debris to distance upto 200m (within average thickness of 15 cms). including cost of materials, labour, HOM complete as per specifications.

Dismantling burnt brick masonry in clay mortar/lime mortar/cement mortar and stacking the bricks within a radius of 50m and removing the debris to a distance upto 200m. including cost of materials, labour, HOM complete as per specifications.

Providing and fixing to wall, ceiling and floor un-plasticised 90mm PVC pipes 10kg/sqcm working pressure chemp plast / waving or equivalent make with pipe fittings, wall clips, making good the wall, ceiling and floor including cost of materials, labour charges, HOM ofequipments and testing complete as per specifications.

Providing and fixing to wall, ceiling and floor un-plasticised 110mm PVC pipes 10kg/sqcm working pressure chemp plast / waving or equivalent make with pipe fittings, wall clips, makinggood the wall, ceiling and floor including cost of materials, labour charges, HOM ofequipments and testing complete as per specifications.

Providing and fixing 25mm dia. CPVC pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain brass threaded fittings, including fixing the pipe with clamp at 1.0m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement, & testing of joints complete. (concealed work including cutting chasing and making good the walls etc.)

Providing and fixing 32mm dia Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). - 32mm nominal OD pipes

Providing and fixing 40mm dia Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). - 40mm nominal OD pipes

Providing and laying in position plain cement concrete of mix 1:2.:4 with cement @ 240kg with 20mm and down size: graded granite metal coarse aggregate @0.69cum and fine aggregates @ 0.459 cum, machine mixed, concrete laid in layers not exceeding 15cms thick, well compacted, in foundation plinth & cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications

Providing rough cement plastering 15mm thick in single coat with 1:4 cement mortar to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications

Providing and fixing colour glazed tiles of size 300x450mm for walls with borders of size 300x100mm, set in cement mortar 1:3 pointing with white cement mixed with matching colour pigment, including curing , cleaning etc., complete. The work includes cost of all materials, labour charges for all items of work, hire charges for equipment, etc., complete as per specification

Providing and fixing ceramic tiles of size 30 x 30cms for flooring, treads & landing, laid on a bed of 20mm thick cement mortar 1:3 mix and spacer jointing filled with epoxy of matching colour pigment, including curing, cleaning etc.,complete. The work includes cost of all materials, labour, curing complete as per specification

Providing and fixing Special make glazed Vitrified tiles (Granomite finish) of approved make, quality and colour of size 600x600x10mm thick fixed on existing flooring with a special roffe adhesive for flooring and skirting etc., complete including providing spacers at required interval and removing stains etc., complete

Providing and fixing white vitreous china clay, water closet Orissa pattern (make: Cera/Parryware/Hindware ) of size 580 x 440mm with integral type footrests, 100mm S or P trap, 10 litre low level, P.V.C flushing cistern (all are approved make ) with fittings, C.I / M.S brackets, 32mm diameter flush pipe fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications

Providing and fixing white vitreous china clay, water closet European type (make: Cera/Parryware/Hindware ) ( Pedestal type, P-trap ) with black solid plastic seat and lid, C.P brass hinges, rubber buffers. 10 litre low level, P.V.C flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications

Providing and fixing white vitreous china clay, surgeon type wash basin (make: Cera/Parryware/Hindware )size 660x460mm with a pair of 15mm C.P brass pillar taps with pair of elbow operated levers, C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications

Providing pedestal for wash basin of approved 1st quality and make conforming to ISI Specifications and fixing for low down cistern as directed .Rate includes cost of materials and conveyance to work spot.

Providing and fixing C.P. brass towel rail 740mm length, 20mm dia with C.P brackets, fixed to wooden cleats with C.P. brass screws including cost of materials, labour complete as per specifications

Providing and fixing 453x357mm dia rectangular shape mirror with plastic moulded frame of approved make and shade with 6mm thick hard board backing including cost of materials, labour complete as per specifications

Providing and fixing CI Nahani trap 10cms x 7.5cms of approved make conforming to ISI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot).

Providing and fixing 7.5 cms to 15.00 cms dia NP grating 100 mm dia.

Wall bores in size stone masonry upto 45 cm thick. Including cost of materials, labour, HOM complete as per specifications

Construction of partition wall 11.2 cms thick with non modular ground moulded burnt bricks of class designation 3.5 Newton per sqmm with cement mortar 1:4 inlcuding providing and fixing plaster mesh manufactured out of hot dipped galvanised iron of nominal thickness 0.35 mm. 100 mm. wide as per I.S. 2212/1991 at 7.5 m. c to c including cost of materials, labour charges, scaffolding, curing complete as per specifications

Providing and constructing burnt brick masonry with approved quality of modular bricks of standard size of class designation 5.0Newton per sqmm (table moulded) with cement mortar 1:6 for basement and superstructure including cost of materials, labour charges, scaffolding, curing complete as per specifications

Providing 15mm thick cement plaster in single coat with cement mortar 1:4 to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications

Providing and applying two coats with plastic emulsion paint of approved brand and shade on ceiling internal wall surface to give an even approved shade including scrapping, primer coat after thoroughly brooming the surface free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, and scaffolding etc., complete as per specifications & directions of the Engineer-in-charge

Providing and laying plat form using prepolished, water cut / gang saw 40mm thick telephonic Black Granite. laid on existing vertical -supports and fixing in CM 1:3 proportion. Including cutting to required shape, pattern with paper joints, including full rounding for nosing, finished with cement mortar, pointed with colour pigments to match the colour of slab making through jointing with sealant, making holes 25mm x 12mm grooves in joints including curing etc.., complete as per specifiaction

Providing and fixing factory made single leaft rigid GRP Sandwich composite door shutter of 32mm thick, laminated with two GRP skins with wood grain finish, fabricated using U.V-stabilized Isopthalic Gelcoat and on layer of 45 gsm E-Glass Chopped strand Mat (CSM), impregnated with orthopthalic polyster resin. The thickness of the skins shall not be less than 1.5mm. Expanded Polystyrene (EPS) structural foam panel of 29mm thickness and a density of 20 Kg/m3 shall be used as core material. Wooden reinforcements made of Seasoned Salwood block of cross section not less than 28mmx32mm and also necessary salwood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles, etc, shall be provided. A structural adhesive compatible with EPS foam shall be used for bonding the core material, the Salwood reinforcement and the skins. The material and process for manufacturing the door shutters shall confirm to RV/TIFAC Composites Design centre Standards and specifications and the door shutters tested in confiramation to IS 4020-1994. The finish of shutter will be plain colour White/Ivory/Beige/Light Grey or any other colour using high quality pigments. Exclusing cost of fixtures and inclusive of supply of shutters to respective work spot

Providing and fixing 65mmx90mm GRP Doorframe fabricated using E-Glass Chopped Strand Mat (CSM). U.V-stabilized Isopthalic Gelcoat and Isopthalic resin. The thickness of the GRP skin shall not be less than 2.0 mm. The doorframe consists of four segmens, which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screws. The GRP frame shall be provided with wooden reinforcement of 6 locations fro high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium density foam/Plaster with fibre reinforcement. Six Numbers of 260mmx25mmx5mm size S shaped M.S. flat hold fast shall be provided with the frame

Constructing brick masonry inspection chamber 450mmx450mm and 450mm depth (clear inside dimension )for single pipe line using table moulded non-modular bricks of class designation 50m in cement mortar 1:5, C.I.cover with frame (light duty) 450x450mm internal dimensions, total weight of cover with frame to be not less than 38kg(weight of cover 23kgand frame 15kg)RCC top slab with cement concrete1:2:4, foundation concrete 1:5:10, with 40mm downsize metal, inside plastering 12mm thick in CM 1:3,finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specification.

Providing & fixing of glazed 2 Track - 2 Panel Sliding Windown With Mesh made out of multi chambered uPVC sections with TPv gaskets having isolated drainage and reinforced with GI throughtout the window. the sliding outer frame having a overall size of 108x45 mm with reinforcement of 1 mm thickness, sash with overall size of 39x58 mm with reinforcement of 1.5 mm thickness, mesh sash of overall size 30x48.5 mm reinforced with 1.5 mm of GI. Glazing bead for fixing kof glass shall be of size 20x18mm and coextruded with gasket. Fiber Glass mesh shall be provided in mesh shutter. Windows shall be provided with 5 mm plain float glass, standard hardware and single point locking system of flush lock. Wall thickness of frame, mullion & sash shall be 2-2.2 mm.

Providing and fixing 4mm thick glass panes to steel windows including laapa/sealent/TW beading of 10 mm thick and 2 coats of approved paints. including cost of materials, labour, HOM complete as per specifications.

Easing of MS window shutters. including cost of materials, labour, HOM complete as per specifications

Providing, fabricating, assembling and fixing in position aluminium partitions using sections in combination of plain, single grove and double grove as per requirements for the frames of overall size 101.6mm x 44.45mm, 3.18mm.thick having section weight, plain sections 2.40kg/m single grove section 2.541kg/m. and double grovesection 2.683 kg/m and bottom 46 kg/m; aluminium louvres of size 77.6mmx27.6mm 1.7mm. thick section weight 0.483kg/m; bottom portions provided with 12mm. thick prelaminated sheet both side of approved colour lamination exterior grade; aluminium sections of mat finish or glossy finish using section, spacing of vertical member shall not exceed 0.6 m. c to c; sections are cut to the required lengths, joints mitered and corners grinded subdividing frames tennoned and rivetted to the frames, the assembled frame should be stiffened with corner angles stripped and fixed with screws, rawl plugs and teak wood gutties to R.C.C.columns or masonry on sides, R.C.C. lintels or beams at top and floor at bottom, including cutting chistling and making good with cement mortar to match the surface, providing and fixing bottom panel filled with the materials to a height of 0.9m. from floor level; and 5.5mm. thick plain glass for middle portion viz., 0.9m. to 2.13 m. and top panel with lower sections, the glass and panels fitted with glazing clips of 19mmx17.3mm. with thickness of 0.9mm. weight 0.124kg/m; aluminium sections pre-treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherence of mortars or any other sticky materials; vertical members embedded in the flooring by making suitable size holes and fixing with cement mortar, with necessary opening for fixing of doors of standard size (excluding cost of door opening) All the frame should be throughly cleaned free from rust, scale or dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specifications. using aluminium section anodized to 12 - 15 microns