Agricultural Produce Market Committee Tender

APMCKLR06 - Filling available excavated earth (excluding rock) intrenches, plinth, sides of foundations and other similarworks etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming andwatering, lead up to 50 m and lift upto 1.5 m.Earthwork excavation (in deposited soil) and filling sides of foundation all lead & lift.

APMCKLR08 - Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) all lead & lift.

APMCKLR10 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.all lead & lift.

APMCKLR05 - Providing and laying in position Reinforced cementconcrete for all Super structures of building , Roadworks, Water works, Irrigation works & superstructure works of bridges upto 3.50 m height. Thegranite/trap/basalt crushed graded coarse aggregatesand fine aggregates as per relevant IS Codes machinemixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includesfinsishing concrete structure in line, all lead & lifts, costof all materials, quality confirming to the requirementsof relevant IS codes , labour, Usage charges ofmachinery, curing and all other appurtenances requiredto complete the work as per technical specifications.(The cost of steel reinforcement, dowel bars &formwork to be paid separately) M20 Design Mix Using 20 mm and down sizegraded crushed coarse aggregates all lead & lift.

APMCKLR13 - Providing and fixing M.S. Gate as per Chief Architect Drawing, using 50mm x 50mm 14 guage M.S. hollow pipe frame work bent to ornamental shape as shown in the drawing and 35mm x 6mm and 16 x 16mm Square rods for verticals alternatively spaced at 4cms c/c in two halves and 40mmx6mm M.S. flats for horizontal member and at the top cast iron spikes are provided at alternate vertical members asshown in the drawing etc., complete. All the steel surface should be thoroughly cleaned free of rust and painted with anti corrosive paint (shop paint) etc., complete. The work includes cost of all materials, labour charges for all items of work, hire charges for welding, cutting and grinding equipment, and electricity charges, with lead and lift, loading and unloading charges, etc., complete as per specifiocation. complete as directed by the Engineer-In-Charge of the work.all lead & lift.

APMCKLR02 - Providing and laying in position plain cement concretefor levelling course for all works in foundation. Thegranite/trap/basalt crushed graded coarse aggregatesand fine aggregates as per relevant IS Codesmachine mixed, laid in layers not exceeding 150mm thickness, well compacted using plate vibrators,including all lead & lifts, cost of all materials of quality,labour, Usage charges of machinery, curing, and allthe other appurtenances required to complete thework as per technical specifications. (The cost of steelreinforcement & formwork shall be paid separately)Mix 1:4:8( M5) Using 40 mm and down size gradedcrushed coarse aggregates all lead & lift.

APMCKLR03 - Providing and laying in position Reinforced cementconcrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates andfine aggregates as per relevant IS Codes machinewith super plasticizers laid in finished layers,well compacted using needle vibrators, including alllead & lifts, cost of all materials, quality confirmingto the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all theother appurtenances required to complete the workas per technical specifications. (The cost of steelreinforcement & formwork to be paid separately)2.2.1.1 M20 Design Mix Using 20 mm and down sizegraded crushed coarse aggregates all lead & lift.

APMCKLR04 - Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers not exceeding 150 mm thickness, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M20 Design Mix Using 20 mm and down size graded crushed coarse aggregates all lead & lift.

APMCKLR11 - Manfacturing,supply and installation of retro-refective Over-Head Gantry signboards made out of cube corner micro orismatic grade sheeting confirming to type XI standards of IRC;67;2012 fixed over (4mm thick Aluminium Composie Panel sheet,excluding the cost of type XI -reflective sheeting and 4mm thick ACP sheet with suitable back support frame over a designed support system of aluminium alloy or galvanised steel tresties of section type of as per specifications. Vertical and lateral clearance of the Gantry shall be as per IRC 67 2012 and as per clause 800.2.2 and 800.2.3 and installed as per clause all lead & lift.

APMCKLR15 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new workover an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to removeall dirt, dust, mortar drops and foreign matter including preparing thesurface even and sand paper smooth, cost of materials, labour completeas per specifications and as per directions of Engineer-in-charge all lead & lift.

APMCKLR12 - Supply and installation of retro-reflective Over Head Gantry sign boards made out of cube corner micro prismatic grade sheeting confirming to type XI standards of IRC;67;2012 specification & fixed over 4mm thick Aluminium composite panel sheet having minimum 0.30mm thick aluminium skin on both sides excluding the cost of back support frame,vertical support and horizontal support and foundation as directed by the engineer in charge of the workall lead & lift.

APMCKLR09 - Providing and laying in position plain cement concretefor levelling course for all works in foundation. Thegranite/trap/basalt crushed graded coarse aggregatesand fine aggregates as per relevant IS Codesmachine mixed, laid in layers not exceeding 150mm thickness, well compacted using plate vibrators,including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and allthe other appurtenances required to complete thework as per technical specifications. (The cost of steelreinforcement & formwork shall be paid separately)mix 1:3:6 (M10) using 20mm all lead & lift.