Agricultural Produce Market Committee Tender

Fabrication, Supplying, Erection, Testing and Commissioning of 12 m/12.5 m - Top 100 mm and Bottom 310 mm dia ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) thickness as per BSEN 10025 grades 355 JO/ASTM A572-50 steel sheet plate for shaft suitable to withstand a wind velocity of 47 m/s as per IS 875 part 3(as per GA Drawing). Base plate as per IS 2062/ASTM A572-50. The mast shall be Galvanized in single Hot-dip as per BSEN ISO 1461/ASTM A123 with an average 70 microns as per IS 2629, and welded as per BS 5135 Single L-Seam joint The mast shall have 2 Way head frame with die cast LM-6 pulleys, stainless steel axle, Phosphorus Bronze bearing bush press-fitted with separate guides for 2 runs of 5 mm dia, stainless steel wire rope of AISI 304grade 7/19-core, (Factor of Safety as per TR no-7). 2.5 mm2 EPR insulated PCP sheathed trailing power cable housed inside the bottom shaft of mast with door having locking arrangement The mast shall have manual/power tool (Suitable reversible geared motor operating on 230/415V, 50Hz, shall be provide above 15 Mtr mast) The mast shall have lantern of 2 segments, suitable dia with max load carrying capacity as per IS 1239. The mast shall be erected on existing RCC footing. The mast shall be supplied with 3 mm thick template, lightning arrester of 1.2m length galvanized pipe with top arrow fitted on top of the head frame cover and GLS type aviation twin l A fitting with wiring complete. (excluding foundation) as per technical data. as per the standard technical specification and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

KSRB 4-1.6: Providing and Laying in position plain cement cocrente of mix 1:2:4 with Cement @ 240 Kgs, with 20 mm and down size graded granite metal coarse aggregates @ 0.878 CMT and fine aggregtes @ 0.459 CMT machine mixed concrete laid in layers not exceeding 15 cm. thick well compacted, in foundation and plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supplying of Spiral Earth Electrode including Labour Charge for Erection as per the standard technical specification and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supplying and fixing of 11 kV, 200 Amps, Single Break GOS including Labour Charge for Erection as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

KSRB 4-1.3: Providing and Laying in position plain cement concrente of mix 1:4:8 with OPC Cement @ 180 Kgs, with 40 mm and down size graded granite metal coarse aggregates @ 0.85 CMT and fine aggregtes @ 0.57 CMT machine mixed, machine mixed, concrete laid in layers not exceeding 15 cm. thick well compacted, in foundation and plinth, including cost of all materials, labour, HOM of machinery, curing complete as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Providing Sheet Metal/Deep Drawn Street Light Metering Box with Automatic Control Swith, Contactors with Single Phase 5-30 Amps meter & 50/5A CT including wiring and Labour Charge for Erection as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supplying 12 Way LT Feeder Piller Box with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar as per IS-13947 Part-1&2 as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supplying and fixing of 11 kV, Horizontal Cross Arm - Galvanised Iron (GI) as per IS-1977 including Labour Charge complete. as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supplying, and fixing of Single Arm Bracket with 1500 mm Standard 40/50 mm dia Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. as per the standard technical specification and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Providing 200 Amps Porcelain Cutout (500 Volt) as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Providing 50mm dia GI Pipe B - Class as per IS-1239 as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supplying and flush mounting 12" x 12" x 3" (300 x 300 x 76 mm) teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. as per the standard technical specification and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Providing and laying in position M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

"Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately). with all lead and lift etc., complete as directed by the Engineer-In-Charge of work."

KSRB 4.9.1: Providing mild steel reinforcement for RCC work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, and Laying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid)cost of materials labour, HOM of machinery complete as per specifications. as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supplying and fixing of RCC Pole Clamp - GI as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Open Conduit System: Supplying heavy gauge PVC conduit pipe 25 dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. as per the standard technical specification and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000hr Lumen Maintenance of 70 Parsent, CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminairegreater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with 240W System Power consumption. LED Efficiency greater than 1301m/w, nominal CRI greater than75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI and any Government certified agency and Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ complete. as per the standard technical specification and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. complete. as per the standard technical specification and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Earth work excavation by manual means In all kinds of soils to any Depth for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse including cost of labour, tools & other appurtenaces required to complete the work. with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supplying and fixing of 11 kV, 45 kN Polymeric Insulator as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supplying and fixing of LT 4 Pin Cross Arm - MS (Dwg No. BESCOM/GM/QS&S/32 Dtd 24.11.2018) including Labour Charge complete. as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Digging of Pit in Ordinary Soil for providing GI Pipe type Earthing as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Labour charge for Guy concreting with Boulders, Mud and Sand as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supplying and fixing PVC/metal conduit 25 mm Deep junction box as per the standard technical specification and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supplying and fixing of Rabbit ACSR Conductor (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM including Labour Charge for Erection as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Earth work excavation In Hard Soil for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed. as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supplying and fixing of Anticlimbing Device GI Barbed wire (12 Mtr/Kg) including Labour Charge for Erection as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supplying and fixing of LT ST Support 50x6 mm Flat - GI as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Providing 7/10 SWG Guy Wire (7/3.251 mm Dia), Std Wt: 680 Kg/KM as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supplying and flush mounting 10" x 7" x 3" (254 x 178 x 76 mm) teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. as per the standard technical specification and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supplying and fixing of Earthing materials pipe type for grounding (Single Electrode with accessories) including Labour Charge for Erection as per the standard technical specification and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Providing PVC Bend 50mm dia as per IS-2509 as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Providing 8 SWG GI Wire (4.064 mm Dia), Std Wt: 125 Kg/KM as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Cutting of Cement Concrete Road surface for U.G cable trenches and disposing of the excavated earth, as directed including Barricading, Danger Lighting then Refilling the Cable Trenches.Cement Concrete Road as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supplying PVC/GI flexible conduit pipe 25 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely complete. as per the standard technical specification and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead of 200 Mtr as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supplying and fixing of RCC Pole - 9 Mtr Long, 145 Kg WL (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785 including Labour Charge complete. as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supplying and fixing of 11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod) as per approved drawing and standard technical specification of BESCOM SR with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supplying Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment ground terminal using PVC Al wire as specified as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Providing PVC Pipe 50mm dia as per IS-2509 as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supplying of 1.1 kV Class HR (Heat Resistant) PVC Insulated & Sheathed Aluminium Single Core Lead wires as per IS-694: 2010 PVC Wire - 6 Sqmm Weight per 100 Mtr Coil: 3.5 Kg as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Supplying of Guy Set Complete with No.15 Strain Insulator & Concreting materials including Labour Charge for Erection as per the standard technical specification of BESCOM SR and drawing with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.