Water Resources Department Tender
... More
The WRD has issued a formal invitation for competitive bids for the Water Resources Department project, for Renovation Of Sukhnadia M I Scheme, Vill Sarma, Block Chhatarpur, Dist Palamu in Palamau, Jharkhand, with an estimated contract value of Rs. 4,76,61,190. The bid opening date for this tender is 14-11-2026 and the last date for bid submission is 30-11-2026. Interested bidders for Water Resources Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Water Resources Department - WRD Tender - Jharkhand Tender
Opening Date14 Nov 2026
Closing Date30 Nov 2026
Tender Amount₹ 4,76,61,190
Costs
EMD
₹ 4,77,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Renovation Of Sukhnadia M I Scheme, Vill Sarma, Block Chhatarpur, Dist Palamu
Contact
Tender Id
2026_WRD_121079_1Tender No
WRD/MID/HUSSAI/S.B.D./01/26-27Tender Authority
Water Resources Department ViewPurchaser Address
-Website
https://jharkhandtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supplying and laying sand filter blanketing in slope of dam of the dam as per design and drawing with watering, compaction including cost of materials, royalty all taxes etc. but excluding the cost of carriage all complete as per specification and direction of E/I. (S.R. No.Part-A 5.6.5) P-258
200.17
2016
-
... More
Supplying and laying stone metal (size 20mm to 63mm) on the slope of dam as per design, drawing including the cost of materials royalty and all taxes etc. but excluding the cost of carriage all as per specification and direction of E/I. (S.R. No.Part-A 5.6.7. pg 258)
200.17
2751
-
... More
Supplying and laying (properly as per design and drawing) rip-rap with good quality of boulders duly packed including the cost of materials royalty all taxes etc. but excluding the cost of carriage all complete as per specification and direction of E/I.(SR Item No. 5.6.8 Part A Page -258)
541.15
2529
-
... More
Supplying and laying boulder in rock toe in trenches of the dam as per design, drawing including the cost of materials royalty and all taxes etc. but excluding the cost of carriage all complete as per specification and direction of E/l.( COMMON PART A SL NO 5.6.4 , Pg-258)
819.0699999999999
2108
-
... More
Dismantling of existing structures like culverts, bridges,retaining walls and other structure coprising of masonary,cement concrete,wood work,steel work,including T$P and scaffolding wherever necessary sorting the dismantled material, disposal of unserviceable material and stacking the servicable material with all lifts and lead of 1000m. (S.R NO. 2.04(iii) B ,Common pg -245)
298.48
430
-
... More
Scrapping of Plaster in lime or cement mortar from brick / stone masonry ( common SOR part A , pg- 246, item No 2.04(viii)
21.22
25
-
... More
Earthwork in excavation of foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth so obtained to a distace up to 50m and average lift of 1.5 m including levelling ramming the foundation trenches removing roots or shrubs. all complete as per specification and direction of E/I (S.R NO. 7.1.27 WRD, pg-155)
2107.21
240
-
... More
Earth work in excavation of foundation trenches of toe wall,spillway,head regulator, outlet, intake well etc. as per designed section in all kinds of soil including moorum soil, soil mixed with kankar, pebbles and boulders upto 300mm size and disposal of the same (beyond 50 m away from the edge of the trenches) with initial lead of 150m and initial lift of 1.5 m as per specification and direction of E/l.(Vide Item No. - 5.1.14.1 of WRD Part -B ,Pg No.-119)
864.14
323
-
... More
E/W in bed clearance or desilting of canals carrying F.S. Discharge between 8.5 cumec (300 cusecs ) and 0.14 cumecs (5 cusecs) and renovation of pynes etc disposal of excavated earth etc in ordinary soil including rough dressing with initial lead of 10 m and lift of 1.5 m as per specification and direction of E/I. Specification revised vide TEC Letter No. 63 and Dated 07/10/94(7.1.20 wrd) p-155
5486.875
191
-
... More
Earth work in excavation in ordinary rock or soft rock (where blasting is not needed ) (vide classification of soil item C ) with initial lead of 10m and lift of 1.5m , including dressing making the sides in proper profile and dressing the bed in proper grade etc.all complete as per specification and direction of E/I.(7.1.12.2 WRD pg-153)
4205.625
710
-
... More
E/w in excavation and filling in canal by the hydraulic excavator as per designed section in ordinary soil(vide classification of soil item-A) and making the banks with excavated earth in proper profile and clod breaking and laying earth in 225 mm layers with initial lead of 10m and all lifts. all complete as per specification and direction of E/I.(7.1.43.3wrd)pg--158
15344.13
72
-
... More
Proving coarse clean local sand in filling in foundation trenches includding ramming , watering, royalty and all other taxes .complete job as per specification and direction of E/I (S.R NO. 7.1.37 WRD, pg -157)
342.2949999999999
697
-
... More
Providing and laying in position cement concrete of specified grade , excluding the cost of centering and shuttering - all work upto plinth level . 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20 mm nominal size). (SR.Item No. 5.3.1.2)BCD pg-127
1067.258
6033
-
... More
Providing and laying in position specified grade of R.C.C, excluding the cost of centering, shuttering, finishing and reinforcement- all work upto plinth level . 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). (SR.Item No. 5.3.9.1)BCD pg-128
80.16
6836
-
... More
Reinforced cement concrete work in walls (any thickness) including attached pilasters , buttress, plinth,and string coarses , fillets , columns, pillars,piers, abutments , posts and struts etc above plinth level upto five floor level , excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). ( BCD 5.3.10 Pg- 128)
46.91
8140
-
... More
Providing rough dressed random rubble stone masonary in CM (1:4) in foudation with approved quality of coarse sand of requisite F.M. (2.5 to 3.0) washed and screened with raking out joints,curing, scaffolding and its removal wherever required including royalty and all taxes etc. complete job as per specificition and direction of E/l.(Vide Item No.-5.4.8 of WRD Part- B, Pg No.- 131) /Vide Item No.- 5.2.28 of Common Part-A , Pg.No.-253
1086.2
3795
-
... More
Providing rough dressed random rubble stone masosry in cm. (1:4) in superstructure with approved quality of coarse sand of requisite F.M. (2.5 to 3.0) washed and screened with raking out joints,curing scaffolding and its removal wherever required including royalty and all taxes etc. complete Job as per specificition and direction of E/l.(Vide Item No.- 5.4.11 of WRD Part- B, Pg No.- 131) / Vide Item No.- 5.2.31 of Common Part-A , Pg.No.-253
1752.3000000000002
4059
-
... More
Providing 25 mm thick cement plaster (1:4) with approved quality of sand of requisite F.M. (2.5 to 3.0) washed and screened including curing, scaffolding wherever required and its removal royalty and all taxes etc. complete job as per specification and direcition of E/l.(Vide Item No. 5.5.5 of WRD Part -B, Pg No.- 133) / V ide Item No.- 5.7.12 of Common Part-A,Pg No.-249
4401.66
383
-
... More
Providing 1.5 mm cement punning including curing carriage of water with all leads and lifts as per building specification and direction of E/I.( 5.7.11 part -A , pg 249
1030.75
82
-
... More
Providing Tor steel reinforcement of 8 mm dia rods as per approved design and drawing with cutting , bending and binding with annealed wire with cost of wire , removal of rust , placing the rods in position( including carriage of bars to work site) all complete as per building specification and direction of E/I. (5.5.4 BCD part B) Pg-140)
5.419
83896
-
... More
Providing Tor steel reinforcement of 10 mm dia rods as per approved design and drawing with cutting , bending and binding with annealed wire with cost of wire , removal of rust , placing the rods in position( including carriage of bars to work site) all complete as per building specification and direction of E/I. (5.5.5.(a). BCD part B) Pg-140)
1.272
81767
-
... More
Providing Tor steel reinforcement of 12mm dia rods as per approved design and drawing with cutting , bending and binding with annealed wire with cost of wire , removal of rust , placing the rods in position( including carriage of bars to work site) all complete as per building specification and direction of E/I. (5.5.5.(b). BCD part B) Pg-140)
0.195
80247
-
... More
Providing Tor steel reinforcement of 16 mm dia rods as per approved design and drawing with cutting , bending and binding with annealed wire with cost of wire , removal of rust , placing the rods in position( including carriage of bars to work site) all complete as per building specification and direction of E/I. (5.5.5.c. BCD part B) Pg-140)
1.224
80247
-
... More
Providing shuttering including strutting proping etc. and its removal after use in foundation as per Specification and direction of E/I .(SR.Item No. 6.3.20 WRD pg-145)
732.21
638
-
... More
Providing centering including strutting and proping and removal after use in deck slab as per specification and direction of E/I. (WRD 7.3.20, pg-146)
118.91999999999999
891
-
... More
Earth work in filling foundation trenches or back filling of masonry structures with suitable earth in layers not exceeding 150mm thick well watered, rammed and fully compacted and finaly dressed with earth obtained from excavation of foundation trenches and kept at a lead of 30m and initial lift of 1.5m complete as per Specification and direction of E/I(SR.Item No. 6.1.16) pg-140
1359.3000000000002
181
-
... More
Providing weep hole with dry graded stone filter of 20 mm to 40 mm size in abutment and wing wall as per specification and direction of E/l.(Vide Item No. 6.7.6 of WRD Part -B, Pg No.- 151 ) / Vide Item No.- 6.7.6 of Common Part-A,Sl No.- 6.9, Pg No.-258.
135
191
-
... More
Supplying 150 mm dia NP2 RCC Hume pipe with collar as per IS 458- 1971 ( Sl No 10 M300 (ii), Pg No 96 wrd)
227.5
352
-
... More
Labour for laying fitting and fixing 150 mm NP2 Hume pipe with collar in line , level and grade , as well as providing approved jointing material and joints properly filled to make them water proof , all complete as per specification and direction of E/I( s.R No 7.6.1.1 WRD , Pg No 169)
227.5
308
-
... More
Supplying 450 mm dia NP2 RCC Hume pipe with collar as per IS 458- 1971 ( Sl No 10 M300 (vi), Pg No 96 wrd)
66
1210
-
... More
Labour for laying fitting and fixing 450 mm NP2 Hume pipe with collar in line , level and grade , as well as providing approved jointing material and joints properly filled to make them water proof , all complete as per specification and direction of E/I( s.R No 7.6.1.4 WRD , Pg No 169)
66
866
-
... More
Supplying 800 mm dia NP2 RCC Hume pipe with collar as per IS 458- 1971 ( Sl No 10 M300 (ix), Pg No 96 wrd)
40
2956
-
... More
Labour for laying fitting and fixing 800 mm NP2 Hume pipe with collar in line , level and grade , as well as providing approved jointing material and joints properly filled to make them water proof , all complete as per specification and direction of E/I( s.R No 7.6.1.6 WRD , Pg No 169)
40
1163
-
... More
Supplying 900 mm dia NP2 RCC Hume pipe with collar as per IS 458- 1971 ( Sl No 10 M300 (x), Pg No 96 wrd)
50
3520
-
... More
Labour for laying fitting and fixing 900 mm NP2 Hume pipe with collar in line , level and grade , as well as providing approved jointing material and joints properly filled to make them water proof , all complete as per specification and direction of E/I( s.R No 7.6.1.7 WRD , Pg No 169)
50
1409
-
... More
Iron and steel plate (8 & 10 x1500) SOR PART A Pg 45, M-195(a)(iii)
425.57099999999997
47
-
... More
Iron and steel plate (over 12 upto 20 mm) SOR PART A Pg 45, M-195(a)(v)
187.489
48
-
... More
Iron and steel channel (100 x 50 Gr. A) SOR PART A Pg 46, M-195(d)(ii)
125.952
49
-
... More
Iron and steel joist (250 x 125 Gr. A) SOR PART A Pg 45, M-195(c)(i)
231.26
48
-
... More
Iron and steel chequired plate (5 to 10 ) SOR PART A Pg 45, M-195(a)(ix)
176.044
48
-
... More
Iron and steel angle (50 x50 x6 /8/10 Gr. A) SOR PART A Pg 45, M-195(b)(i)
63.999
49
-
... More
Mild steel bars(Part A, pg-42, M-062)
23.2494
60
-
... More
Iron and steel angle (100 x110 x8/10/12 Gr. A) SOR PART A Pg 45, M-195(b)(v)
223.5
48
-
... More
Mild steel bars (Av M6)(Part A, pg-47, M-1673)
90.45
60
-
... More
Structurul Steel(Part A, pg-45, M-178)
5.056
60
-
... More
Crane 10 tonne capacity ( SOR Part A Pg-57, P&M 86
16
799
-
... More
Carriage of materials : - (a) Cement :-Lead - 8 km (s) + 3 km (k)
854.947
659
-
... More
(B) Sand: - Lead -10 km (s) + 3 km (k)
2327.465
411
-
... More
( c ) Stone chips :- Lead-10 km (s) + 3 km (k)
1069.4299999999998
411
-
... More
(d) Metal :- Lead -10 km (s) + 3 km (k)
200.17
435
-
... More
(e) Boulder :- Lead -10 km (s) + 3 km (k)
4198.72
423
-
... More
(f) Hume Pipe :- (i) 150 mm Dia:-Lead - 8 km (s) + 3 km (k)
227.5
22
-
... More
(ii) 450 mm Dia:-Lead - 8 km (s) + 3 km (k)
66
118
-
... More
(iii) 800 mm Dia:-Lead - 8 km (s) + 3 km (k)
40
364
-
... More
(iv) 900 mm Dia:-Lead - 8 km (s) + 3 km (k)
50
422
-
... More
G.S.T. @18%
1
1
-
... More
Labour cess@1%
1
1
-

