Rural Works Department Tender
... More
The RWD has issued a formal invitation for competitive bids for the Rural Works Department project, for Rwd./ Chakradharpur/11/2024-25 Construction Of Road From Burkasai To Patiyar (l-4.400 Km.) in West Singhbhum, Jharkhand, with an estimated contract value of Rs. 5,54,76,137. The bid opening date for this tender is 26-05-2025 and the last date for bid submission is 02-06-2025. Interested bidders for Rural Works Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Rural Works Department - RWD Tender
Civil And Construction
Road Construction
Eprocure
Opening Date26 May 2025
Closing Date2 Jun 2025
Tender Amount₹ 5,54,76,137
Technical
Technical
Financial
Class Of Bidder
... View More
A Class, or specific class of contractor in Jharkhand, RWD/RDD or others as mentioned in the NIT.
Bid Capacity
... View More
The formula for bid capacity is: Assessed Available bid Capacity = (AxNx2.5-B) Where: A = Maximum value of civil engineering works executed in anyone year during the last five years N = Number of years prescribed for completion of the works for which bids are invited B = Value of existing commitments and ongoing works to be completed during the next two years.
Technical Capacity
... View More
The required prior work experience for the bidder includes experience in similar works, with the bidder having completed similar works of a similar nature and volume over the last five years preceding the year in which bids are invited. To qualify, the bidder should have satisfactorily completed at least one work of similar nature with a value of not less than 1/3rd of the estimated value of the work tendered in the last five years, with a completion rate of at least 90%. Additionally, for tender amounts exceeding 2.5 crore rupees, the bidder should have achieved a minimum annual financial turnover of 50% of the estimated value of the work tendered in the last five years. The bidder should also provide information on the total annual volume of civil engineering construction work executed and payments received in the last five years, along with a financial report for the last five years. A certificate from the Engineer-in-charge for the works performed as a prime contractor is also required, and the bidder should provide information on existing commitments and ongoing work. The escalation factors for the cost of works executed to a common base value for works completed are: - 1 year: 1.1
- 2 years: 1.21
- 3 years: 1.33
- 4 years: 1.46
- 5 years: 1.61 The specific percentage of similar works completed is not explicitly mentioned, but the bidder should have completed at least one work of similar nature with a value not less than 1/3rd of the estimated value of the work tendered.
Costs
EMD
₹ 11,10,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_RWD_101337_1Bid Award Id
ViewTender No
05/R1/2024-25/RWD/CKPTender Authority
Rural Works Department ViewPurchaser Address
-Website
http://jharkhandtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concree, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with allk lifts and lead of 1000 metres) (By Mechanichal Means)
Dismantling Rubble stone masonry in cement mortar
11.25
286
-
... More
Compacting original ground supporting subgrade (Loosening of the ground upto a level of500 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of table 300-2 for subgrade construction.)
4166.89
52
-
... More
Construction of Subgrade and Earthen Shoulders (Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2)
19522.2
131
-
... More
Excavation in Soil using Hydraulic Excavator CK 90 and Tippers with disposal upto 1000 metres. (Excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m)
Including Royalty etc@ Rs. 27.48 per cum but excluding the cost of watering, rolling & compaction.
158.24
62
-
... More
Construction of Embankment with Material Deposited from Roadway Cutting (Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2)
Rolling with smooth wheeled roller
1048.44
61
-
... More
Granular Sub-Base with Coarse Graded Material ( Table:- 400- 1)
Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.
With Grading-I Material
2466.93
3649
-
... More
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
1592.4
4022
-
... More
Prime coat (Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.)
10207.69
82
-
... More
Tack Coat on Granular surfaces treated with primer
Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared granular surface cleaned with mechanical broom.
10207.69
16
-
... More
Tack Coat on Bituminous surfaces
Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.
10207.69
13
-
... More
Bituminous Macadam (Providing and laying bituminous macadam with higher capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.)
510.38
9988
-
... More
Semi-Dense Bituminous Concrete (Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects.)
for Grading-II (10 mm nominal size)
255.19
12515
-
... More
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing.
27.69
4321
-
... More
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501
1179.96
7152
-
... More
Kilometre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) Ordinary kilometre stone (precast)
6
1740
-
... More
Direction and Place Identification Signs with size more than 0.9 sqm size Board. (Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4 mm with area exceeding 0.9 sqm fixed over back support frame of min 40 x 40 x 5 mm Angle mounted on two nos. of mild steel circular pipe 65 NB, 3.2mm thickness and 4.5m meter total height firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing)
For Information at the start of the Road
1
13704
-
... More
Retro-reflectorised Traffic signs (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing)
60 cm x 45 cm rectangular for Villages & others
10
5312
-
... More
For turnings
60 cm equilateral triangle
12
4110
-
... More
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
539.02
584
-
... More
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.
1239.68
55
-
... More
Construction of dry rubble flooring at cross drainage works for relatively less important works.
55.33
3551
-
... More
Plain/Reinfoced Cement concrete in open foundation complete as per drwaing and technical specifications.
(P.C.C. Grade M-15)
180.2
5563
-
... More
Stone masonry work in cement mortar 1:3 in foundation complete as per drawing and technical specifications.
Random Rubble Masonry Work in Cement Mortar 1:3 in foundation
503.675
5750
-
... More
Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and technical specifications
Random Rubble Masonry Work in Cement Mortar 1:3 in S/S
348.5
5609
-
... More
Stone masonry work in cement mortar 1:3 in foundation complete as per drawing and technical specifications.
Square Rubble Coursed Rubble Masonry (1st sort) in C.M. (1:3)
288.44
5870
-
... More
Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and technical specifications
Coarse Rubble Masonary in C.M. (1:3) in sub-structure
141.73000000000002
6016
-
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical speciofications
(P.C.C. Grade M-15)
18.79
5555
-
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical speciofications
(P.C.C. Grade M-20 in Cover Slab)
20.71
5993
-
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical speciofications
(P.C.C. Grade M-25 in Deck Slab)
25.020000000000003
6442
-
... More
Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications
7.65
12733
-
... More
Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specifications
3.6599999999999997
88340
-
... More
Pointing with cement mortar (1:3) on brick / stone masonary work in substrucutre as per technical specifications
517.5
59
-
... More
Plastering with cement mortar (1:3) on brick work in substructure as per technical specifications
329.52
109
-
... More
Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces)
329.52
70
-
... More
Providing & fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing & Technical Specification.
90
268
-
... More
Providing weep holes in Brick masonry/ Plain/Reinforced concrete abutment , wing wall/ returen wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20 H towards drawing face. Complete as per drawing and technical specifications.
449.3
110
-
... More
Backfilling behind abutment, wing wall and return wall with Sandy Material complete as per drawings & technical specification Clause 1204.3.8
(With Sandy Material)
75.45
1142
-
... More
Laying Reinforced cement concrete pipe NP4 / prestressed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets .
7.5
7803
-
... More
Goods & Service Tax (G.S.T.) -
-
-
-
... More
Labour Cess -
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements