Rural Development Department Tender

... More
The RDD has issued a formal invitation for competitive bids for the Rural Development Department project, for Construction Of Girls Toilet At Upg P.s. Kurha Patra, Panchayat- Koyad, Tandwa. in Chatra, Jharkhand, with an estimated contract value of Rs. 9,59,500. The bid opening date for this tender is 11-11-2026 and the last date for bid submission is 17-11-2026. Interested bidders for Rural Development Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Rural Development Department - RDD Tender - Jharkhand Tender

Opening Date11 Nov 2026
Closing Soon17 Nov 2026
Tender Amount₹ 9,59,500 
Notes
Download

Costs

Description

Construction Of Girls Toilet At Upg P.s. Kurha Patra, Panchayat- Koyad, Tandwa.

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) B.C.D. S.O.R. Item No. 5.3.1.2

2.18

4598

10024.14

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) B.C.D. S.O.R. Item No. 5.3.9.1

2.82

5218

14714.76

... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. B.C.D. S.O.R. Item No. 5.3.17.1

6.95

194

1351.78

... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) B.C.D. S.O.R. Item No. 5.3.10

0.94

6082

5717.5

... More
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts. B.C.D. S.O.R. Item No. 5.3.17.6

14.87

465

6920.2

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) B.C.D. S.O.R. Item No. 5.3.9.1

0.8

5218

4174.4

... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. B.C.D. S.O.R. Item No. 5.3.17.5

6.3

363

2293.01

... More
Providiag designation 75B brick work in Cement Mortar (1:6) in foudation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l. B.C.D. S.O.R. Item No. 5.2.6

0.85

5110

4343.72

... More
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). B.C.D. S.O.R. Item No. 5.3.5

3.15

278

876.8

... More
Providiag designation 75B brick work in Cement Mortar (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l. B.C.D. S.O.R. Item No. 5.2.14

6.4

5244

33562.11

... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). B.C.D. S.O.R. Item No. 5.3.11

1.95

6308

12302.3

... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. B.C.D. S.O.R. Item No. 5.3.17.5

7.93

363

2886.28

... More
Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels including edges. B.C.D. S.O.R. Item No. 5.3.17.19

5.04

445

2245.57

... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. B.C.D. S.O.R. Item No. 5.3.17.3

9.13

435

3979.04

... More
Providing TMT steel reinforcement 8mm, 10mm, 12mm & 16mm dia bars as per approved design and drawing excluding carriage of M.S bar to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.5.4 : 8mm dia Bar -

0.167

83314

13913.44

... More
B.C.D. S.O.R. Item No. 5.5.5 (a) : 10mm dia Bar -

0.223

82096

18307.53

... More
B.C.D. S.O.R. Item No. 5.5.5 (b) : 12mm & above dia Bar -

0.167

80879

13506.8

... More
Providing 12 mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 with 1.5 mm cement punning including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l. B.C.D. S.O.R. Item No. 5.7.2 + 5.7.11

13.1

228

2993.35

... More
Providing 6mm cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.7.6

17.07

184

3141.9

... More
Providing 12 mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 with 1.5 mm cement punning including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l. B.C.D. S.O.R. Item No. 5.7.3

92.38

165

15316.6

... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. D.S.R. Item No. 11.39

6.28

990

6222.34

... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. D.S.R. Item No. 8.31

16.72

922

15416.19

... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. D.S.R. Item No. 11.56.1

1.18

2321

2739.68

... More
Supplying, Fitting and fixing M.S grill made of 20 x 6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, hoisting carriage of grill to work site hoisting as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.5.12

12

82

987.72

... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved mak+B50e conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed Portion : Powder coated aluminium (minimum thickness of powder coating 50 micron) D.S.R. Item No. 21.1.1.2

24.75

404

10006.09

... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) D.S.R. Item No. 21.1.2.2

13.2

489

6463.87

... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 5.0 mm thickness D.S.R. Item No. 21.3.2

0.28

1149

321.79

... More
Providing and applying white cement based wall putty of average thiickness 1mm of approved brand and manufacture over the plaster wall surface to prepare the surface even and smooth complete job as per building specification and direction of E/I. D.S.R. Item No. 13.80

60.47

107

6493.22

... More
Providing and applying putty of 2 mm thickness of approved brand and manufacture over the plaster wall surface to prepare the surface even and smooth complete job as per building specification and direction of E/I. D.S.R. Item No. 13.26

32.25

185

5992.05

... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). D.S.R. Item No. 13.47.1

60.47

140

8511.7

... More
Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.8.21

32.25

249

8045.09

... More
Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly, scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.8.43

15

70

1059.15

... More
Earth filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and finally dressed with earth obtained from excavation of foundation trenches with a lead of 50m and lift of 1.5m all complete as per building specification and direction of E/l. B.C.D. S.O.R. Item No. 5.1.7

7.78

55

430.08

... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. B.C.D. S.O.R. Item No. 5.3.8

11.34

351

3988.84

... More
Providing 150mm wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 125mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.10.34

49.85

781

38941.32

... More
Providing and laying factory made chamfered edge 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. D.S.R. Item No. - 16.91.1

31.18

808

25204.55

... More
Sanitary Work- Supplying, fining and fixing viterous white glazed earthen ware I.W.C of Parry Hindustan or any other I.S.S approved make with 100mm H.C.I "p" trap 15 liters C.I. or C. pull and let go flushing cistern of names or other I.S.S equivalent make, complete with all fittings. C.I or C.C brackets 32mm alkathene/P.V.C telescopic flush, pipe about 2M long with one brass coupling and clamps G.I chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I body brass spindle stope cock of weight not less than 50 grins. 15 mm P.V.C connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. D.W.S.D. Item No. 3.2.1(A)(c) 580mm long with 10 litre low level P.V.C. cistern

2

4384

8768.92

... More
Supplying, fitting and fitting vitreous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or M.S. brackets 32m C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. D.W.S.D. Item No. 3.2.5

2

2084

4168.72

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 15 mm Nominal Dia Pipe DSR 18.8.1

15

382

5737.22

... More
20 mm Nominal Dia Pipe DSR 18.8.2

15

445

6681.39

... More
25 mm Nominal Dia Pipe DSR 18.8.3

10

542

5427.91

... More
Providing and fixing male ended 15mm dia brass bib cock of approved quality (wt. not less than 350 grams) with extra socket all complete as per specification and direction of E/I. D.W.S.D. Item No 3.1.5.1

4

354

1418.36

... More
Providing and fixing brass stop cock of approved quality all complete as per specification and direction of E/I. D.W.S.D. Item No 3.1.6(A)(a)15mm dia

4

282

1129.16

... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. D.W.S.D. Item No. M079

1000

7

7759.13

... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) 110mm dia Single socketed pipes. D.S.R. Item No. 12.41.2

15

277

4158

... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. D.S.R. Item No. 12.42 Single tee with door - 110mm

6

178

1068.78

... More
Bend 87.5° - 110mm

6

114

686.64

... More
Shoe (Plain) - 110mm

6

100

603.12

... More
Septic Tank- Earth work in excavation in foundation trenches in hard soil (vide classification of soil item - A+B) and disposal of excavated earth as obtained to a distance up to 50M including all lifts with leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as perbuilding specification and direction of E/I. B.C.D. S.O.R. Item No. 5.1.1 + 5.1.2

21.75

167

3639.43

... More
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royaly and taxes all complete as per building specification and direction of E/l. B.C.D. S.O.R. Item No. 5.1.10

0.68

589

400.87

... More
Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes, royalty all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.6.3

8.92

330

2946.63

... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) B.C.D. S.O.R. Item No. 5.3.1.2

1.36

4598

6253.59

... More
Providiag designation 75B brick work in Cement Mortar (1:6) in foudation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l. B.C.D. S.O.R. Item No. 5.2.6

7.97

5110

40728.77

... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) and direction of E/I. B.C.D. S.O.R. Item No. 5.3.11

0.09

6307

567.71

... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) and direction of E/I. B.C.D. S.O.R. Item No. 5.3.11

1.36

6307

8578.7

... More
Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 with 1.5mm cement punning including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.7.2 + 5.7.11

47.97

235

11278.71

... More
Providing TMT steel reinforcement 8mm dia bars as per approved design and drawing excluding carriage of M.S bar to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. (i) 5.5.4

0.051

83314

4249.02

... More
(ii) 10 mm Dia Bar 5.5.5 (a)

0.038

82096

3119.67

... More
(iii)12 mm and 16 mm Dia Bar5.5.5 (b)

0.038

80879

3073.4

... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design D.S.R. Item No. 19.32.1

1

24301

24301.54

... More
Electrical Work- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. 3.2 (ED) Group B

10

706

7060

... More
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 1.7.1 (ED) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire

25

147

3675

... More
2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire 1.7.2

15

196

2940

... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). 1.31

2

322

644

... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 1.32

2

405

810

... More
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 2.18

1

1014

1014

... More
Supplying and fixing of following sizes PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.1.21 20 mm dia

20

60

1200

... More
25 mm dia 1.21.2

15

65

975

... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mm x 75mm) 1.27

2

169

338

... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.2.12.7 50/63 amps, DP

1

704

704

... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2.15.1 40 amps

1

532

532

... More
Providing and fixing 9" (230mm) Metal exhaust fan.

2

1339

2678.34

... More
Providing and fixing of LED Bulb - 15/16 watt

6

229

1379.4

... More
Providing and fixing of recess mounting LED Round down light - 15/16 watt

2

1024

2048.41

... More
Deep Boring- Cost of drilling 200mm x 165mm x 125m deep bore well in all kinds of soil and rock in rural area for installation of pump set with hydraulic D.T.H. rig machine all complete! including supplying all materials, labours, tools, drilling rig, air compressor and equipment as well as fuel, lubricants for making boring and cost of transporting/charges of rig machine & other vehicles up to site of the work as per specification and direction of E/l. (DWSD - P-57, Sl.-119, M1035 ) (a) Up to 50 mtr. Below G.L.

50

885

44256

... More
(b) Beyond 50 mtr. up to 125 mtr. Below G.L.

105

924

97041

... More
Supplying all tools,tackles & lowering of 200mm dia MS ERW casing pipe of 6mm wall thickness including welding charges, cost of pipe etc. all complete job as per specification and direction of E/I. (DWSD - P-58, Sl.-120, M1036 )

25

1839

45980

... More
Supplying all materials, labours, tools and equipments for fitting and fixing 200mm dia. M.S. Cap over casing pipe complete job as per direction of E/I. (DWSD - P-58, Sl.-120, M1036 )

1

252

252.89

... More
Supplying 32mm Dia CPVC pipes 3mtrs. Long screwed at both ends with seamless socket all complete job. (DSR) (i) 25mm dia - DSR Code No. 8638

30

140

4223.1

... More
(ii) 32mm dia - DSR Code No. 8639

105

181

19057.5

... More
Supplying all tools ,equipment and labour for flushing ,washing and developing of drilled tube well to give clear water all complete jobs as per direction of E/I. (DWSD - P-65, Sl.-126, M1042 )

1

4101

4101.82

... More
Supplying submersible pump set (KSB/KIRLOSKER/CRI make 3 HP Submersible pump ) conforming to IS : 8034 and motor conforming to IS : 9283 . pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415V ±10% , 3PH , 50Hz, AC Supply with cable guard thrust carbon/fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 metre submersible copper conductor cable in single / double run shall be provided with each pump. Submersible pump 100mm dia (With Bronze / SS Impeller ) upto 8 Stages including all taxes, royalty, etc.all complete job as per direction of E/I. (DWSD - P-67, Sl.-139, M1055 ) 2.0 HP

1

21347

21347.36

... More
Supplying fitting and fixing 3 core 4mm2 flat copper submersible cable FINOLEX/HAVELLS make including all taxes,royalty etc all complete job as per direction of E/I. (ED - P-36, M -1627)

125

206

25863.75

... More
Supplying and fixing G.I. Fittings of approved make and manufacrturer -do- -do- all complete as per specification and direction of E/I. (DWSD - Sl.-14, M930 ) (E)Socket/Union 25mm dia

17

84

1439.05

... More
32mm dia

38

134

5099.6

... More
Elbow 25mm dia

2

48

96.56

... More
32mm dia

2

72

144.96

... More
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 25mm nominal bore, weighing not less than 62 gms DSR - 18.75.3

2

88

177.76

... More
providing and fixing G.M. Non - Return valve horizontal / vertical type of approved quality as per specification and direction of E/I. Non - Return valve (Vertical) of 25mm dia weight not less than 375 gms DWSD - 3.1.7 B(iii)

2

536

1072.14

... More
Carriage of materials including loading, unloading, stacking -do- -do- all complete as per specification and direction of E/I. (i) Cement

6.9

539

3724.62

... More
(ii) Sand

15.81

739

11698.77

... More
(iii) Bricks

8.16

856

6984.96

... More
(iv) Steel

0.684

539

369.22

... More
(v) Stone Chips

10.17

680

6920.07

... More
GST @ 18 %

805084.9610743879

-

144915.29

... More
Labour cess @ 1%

950000.2540677777

-

9500



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.