Jharkhand State Rural Road Development Authority Tender

Providing and fixing of typical PMGSY Informatory Singboard with logo as per MORD specification ans drawing, Three MS Plates of 1.6mmm thick, top and middle plate duly welded with MS Flat iron 25mm x 5mm size on back of edges. The lower platw will be welded with MS Iron angle iron frameof 25 x 25 x 5mm -do- -do- as per technicaal specification clause 1701and Annexure 1700.1

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405 (including carriage of all materials, all taxes, royalty etc. complete job.)

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 (including carriage of materials, all taxes, royalty etc. complete job)

GST @ 12%

Plain/Reinforced cement concrete in open foundation complete as per drawing and Technical Specifications (P.C.C. Grade M-15) (including carriage of materials, all taxes, royalty etc. compelte job)

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5

Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 to 1.0 kg/sqm using mechanical means as per Technical specification clause 502 (including carraige of all materials , all taxes, royalty etc, all complete job)

Clearing and grubbing of road land including uprooting wild vegetation grass, bushes, shurbs, saplings and tress of girth upto 300 mm, removal of stumps of such tress cut earlier and disposal of unserviceable materials and stacking of serviceable material upto 1000 mtr including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MORD technical specification Clause 201

Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,

Labour Cess @ 1%

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405 (including carriage of all materials, all taxes, royalty etc. complete job.)

Kilometre Stone - Reinforced cement concrete M-15 grade kilometre stone/local stone of standard design as per IRC 8 fixing in position including painting and printing etc as per drawing and MORD Technical Specification Clause 1703 (including carriage of all materials, all taxes, royalty etc. complete job) Ordinary Kilemetre stone (precast) - (350 x 250 x 1100mm)

Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications (including carraige of all materials , all taxes, royalty etc, all complete job)

Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204

Plain/Reinforced cement concrete in substructure complete as per drawing and Technical Specifications (P.C.C. Grade M-25 in Deck Slab) (including carriage of materials, all taxes, royalty etc. compelte job)

Details

Earthwork in excavattion in all kinds of soil for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring & bracing, removal of stumps and other deleterious material and disposal upto lead of 50 M, dressing of side in upto 3.0 m depth.

Stone masonry work in cement mortar in substructure complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 Random Rubble Stone Masonary in C.M. (1:4) in s/s (including carriage of materials, all taxes, royalty etc. complete job)

Kilometre Stone - Reinforced cement concrete M-15 grade kilometre stone/local stone of standard design as per IRC 8 fixing in position including painting and printing etc as per drawing and MORD Technical Specification Clause 1703 (including carriage of all materials, all taxes, royalty etc. complete job) 5th Kilometre Stone (precast)

Plastering with cement mortar (1:3), 15mm thick on brick or stone masonry work as per drawing and technical specification Clauses 613.3 and 1204 (including carraige of all materials , all taxes, royalty etc, all complete job)

Backfilling behind abutment, wing wall and return wall with Sandy Material complete as per drawings & technical specification Clause 1204.3.8

Plain/Reinforced cement concrete in substructure complete as per drawing and Technical Specifications (P.C.C. Grade M-15) (including carriage of materials, all taxes, royalty etc. compelte job)

Plain/Reinforced cement concrete in substructure complete as per drawing and Technical Specifications (P.C.C. Grade M-20) (including carriage of materials, all taxes, royalty etc. compelte job)

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 (including carraige of all materials , all taxes, royalty etc, all complete job)

Pointing with cement mortar (1:3) on brickwork as per drawing and technical specification Clauses 613.3 and 1204

Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504.

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications (including carraige of all materials , all taxes, royalty etc, all complete job)

Reinforced cement concrete M-15 grade local stone of standard design as per IRC 8 fixing in position including painting and printing etc as per drawing and MORD Technical Specification Clause 1703 (including carriage of all materials, all taxes, royalty etc. complete job) 200 m stone (precast) - (15 cm x 10 cm x 65 cm)

Stone masonry work in cement mortar in foundatoin and plinth complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 Random Rubble Stone Masonary in C.M. (1:4) in f&p (including carriage of materials, all taxes, royalty etc. complete job)