Jharkhand Industrial Area Development Authority Tender

roviding and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc.

Description Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.

Table Top as per Design- Providing and making a table of over all size of top as mentioned above. It shall consist of 18mm thk. BWP. Ply top as per design finished with approved shade and colour, supported on 8-12 nos numbers of mullion boxes, as per design . BWP finished with 1mm thk laminate of approved shade and Ply inter connected with boxing 10" x 6" (as approved by the architect) on top(below table top ) and at bottom (on floor level), finished in laminate of approved shade. Table top to be finished with 2 mm thk leathried of approved shade and colour and other external surfaces with 1.0 mm thk laminate of approved shade.This supporting boxes shall be then covered with apron on all sides as per design with 19 mm thk plywood finished with approved shade of laminate. Additional legs/ supports in 19 mm thk BWP Ply and finished with approved shade of laminates to be provided at distances as mentioned in the detailed drawings and as per the direction of the architect/ Engineer-

Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge 202 SUB HEAD : 9.0 WOOD AND P .V .C. WORK Code Description Unit Rate No. side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in- charge. Decorative finish (both side wood grained finish)

EXECUTIVE BOSS CHAIR- Supplying fitting and fixing of executive boss chair for conference room with stainless steel finish with chrome base wheels, net finish high back finish with relax model & design and preparation of including of all necessary hardware and fittings checking of all the structural and functional design.

EXECUTIVE CHAIRS-Supplying fitting and fixing of executive chair for conference room with stainless steel finish with chrome base wheels, net finish low back finish with relax model & design and preparation of including of all necessary hardware and fittings checking of all the structural and functional design.

OPTRA WALL PANEL Providing and supplying Armstrong ‘Optra Acoustical Wall Paneling’ with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire reaction Class A as per ASTM E-84, fabric with an option of colors – Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut & Shell as per the choice of the Architect of size 600X600 mm providing a minimum sound absorption level of 0.85 NRC to be affixed to wall using Wall panel impalers supplied by M/s Armstrong Industries India Pvt. Ltd and construction adhesives as per the instructions laid down by the manufacturer.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped gaivanized steel sections (galvanized@120 grams/sqm, both side inclusive) consisting of main ‘T’ runner with suitably spaced joints to getrequired length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main”T” runners to be suspended from celling suing GI slotted cleas of size 27x37x25x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-Sections shall be pre-painted with polyesterpaint, all complete for all heights as per specifications, drawings and as directed by Engineer in charge.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry@ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. With commercial grade white 15X15cm Tiles.

ROLLER BLINDS -Providing and fixing of roller blinds at windows area with blackout materials for projecter clear view including of all necessary hardware and fittings such as braket, roller blinds etc.

Cassate AC-2.0 T : Supply, installation testing and commissioning of2.0 TR, 230V, 50 Hz Cassate Air conditioner 3 star rating. Make Hitachi/Blustar/Daikin/Voltas

split AC-1.5 T : Supply, installation testing and commissioning of2.0 TR, 230V, 50 Hz split Air conditioner 3 star rating. Make Hitachi/Blustar/Daikin/Voltas

Outdoor cassate Stand : Supply and installtin of metal braket angle stand for out door unit of cassate AC.

Copper refrigerant piping : Hard drawn suction line 1.325” (1” +3”/8) with insulation + Liquidline 0.875” (7”/8)

PVC Drainline 1” : Supply and installation of 1” hard PVC drainline for indoor unit of cassate AC.

Cu Control cable (3C X 1.5 sq.mm) : Supply, erection and commissioning of armoured cu control cable 3 core x 1.5 sq.mm for connection in between outdoor unit to indoor unit (Cassate AC)

Point Wiring in PVC Conduit, with Modular type Switch: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required. one point holder points

Point Wiring in PVC Conduit, with Modular type Switch: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required.Two point holder Points

Supply and Installation of wall fan 24"(600mm)

S/F "C" Series MCB 6/32 Amp

Suppling installation testing and commissioning of following recessed/surface mounted LED round/square shap down light-do-do-all complete job as per direction of E/I 2'-0"*2'-0" LED Panel light

Circuit/submain wiring PVC conduit:- Wiring for circuit/submain withing along with earth wire with the following sizes in PVC insulated copper conductor single core cable in surface/ recessed PVC conduit as required. 2x1.5Sqw.mm+1x1.5Sq.mm earth wire 142.00Meter

2X2.5Sq.mm+1x2.5Sq.mm earth wire 135.00Meter

S/F light plug point with piano type Accessories:- Supplying and fixing suitable size modular type G.I./PVC box on surface or in recess with phenolic laminated sheet cover infront including providing and fixing 5Pin 5/6Amp socket outlet and 5/6Amp piano type switch connection, painiting etc.as required.

S/F light plug point with piano type Accessories:- Supplying and fixing suitable size modular plate G.I./PVC box on surface or in recess with phenolic laminated sheet cover infront including providing and fixing 6Pin 15/16Amp modular socket outlet and 15/16Amp modular type switch connection, painiting etc.as required.

75'' Interactive Flat Panel Screen Diagonal Size -75 Inches Backlight Type- D LED Aspect Ratio- 16:9 Pixel pitch- 0.4296(H) x 0.4296(L) Response- 5ms to 8ms Resolution- 3840 x 2160 Contrast Ratio- 6000:1 (Static) / 100k:1 (Dynamic) Brightness(cd/m2)- 450cd/m2 Display area- 1650.24mm(H) X 928.26mm(V) Color- 16.7 Million color View Angle- H:178°/ 178° V:178° / 178° OS- Android 11.0 CPU- Amlogic T982, Cortex-A55, 1.5GHz GPU- Mali- G52 RAM- 4GB FLASH (Memory)- 32 GB "Rear Input-HDMI IN*2, USB2.0*1, USB3.0*1, TOUCH USB*1, RS-232*1, Earphone*1, COAX*1RS-232*1, 2- .4GWi-Fi*1, 5G WiFi*1, 5G Hotpoint*1, Bluetooth5- .0*1, AV input*1,VGA IN*1(optional), PC-AUDIO*1(o- ptional), YPbPr Input*1(option)," Front Input-Type-C*1, (Default is the features of USB and Charge; The features of HDMI InputLAN, USB are Options), USB*3, HDMI*1, Touch USB *1

SIntel Core i5 11th Gen Processor (OPS) RAM= 2x SO-DIMM DDR4 2400/2666MHz memory@ 8 GB CPU= Tiger Lake Intel Core i5-1135G7 4 Core 8 Thr- eads STORAGE = 1x M.2 2280 port supports NVME & SATA dual protocol 1x 2.5'' SATA HDD/SDD.. 512 SSD GRAPHICS= Intel,R Iris Xe Graphics HDMI/DP; Support synchronous and asynchronou- s dual display - Display DP/HDMI supports synchr- onous. - Asynchronousdual display - BIOS supports diskless boot, power-on boot scheduled boot Hardware supports one-key backup and Operating systems = Windows 10/11, Linux restore sys- tem Support JAE 80 PIN Port.Support TPM2.0

CAMERA- CANON Brand- CANON Description- 4K Video camera without capture card

DIGITAL WIRED AUDIO CONFERENCE SYSTEM FOR CONFERENCE ROOM Brand - Ahuja,yamaha , bose and bosch for (chairman Unit) with Detachable gooseneck Microphone Microphone Type Model – D-Cerno C SL Controls 50 Units. Frequency response 20Hz~20KHz SNR 85Db(A) Dynamic Range 80dB Total Harmonic Distortion 0.05% Audio input LINE IN x 2 Audio Output LINE OUTPUT x 2 Output Load 1kΩ LAN interface 1x RJ45 Recording USB x 1 Amplifier Output 2x25W/4Ω Control Port RS232, RJ45 PTZ Camera Control Shall supported.

DIGITAL WIRED AUDIO CONFERENCE SYSTEM FOR CONFERENCE ROOMBra nd - Ahuja,yamaha , bose and bosch for(Delegate Unit) with Detachable gooseneck Microphone Microphone Type Model – D-Cerno D SL Controls 50 Units. Frequency response 20Hz~20KHz SNR 85Db(A) Dynamic Range 80dB Total Harmonic Distortion 0.05% Audio input LINE IN x 2 Audio Output LINE OUTPUT x 2 Output Load 1kΩ LAN interface 1x RJ45 Recording USB x 1 Amplifier Output 2x25W/4Ω Control Port RS232, RJ45 PTZ Camera Control Shall supported.

SITC of HDMI Transmitter over Cat 6 (HD Base T) up to 70 m with inputs 1 Cats (HD Base T), 1 HDMI Output, 2 K and 4 K Support, HDTV Compatible, HDCP 2.2 Complaint with IR an RS-232, compliance : CE, ISO 9001, ISO14001, OHSAS 18001, etc complete as required. Approved Makes : Lighwere/Kramer/ RGB Spectrum.

SITC of Wi-Fi router, 4 LAN ports, 1 Gbps bandwidth with power adaptor. Approved Makes : Lighware/Kramer/ RGB Spectrum.

Supply and Laying of 3.0 Meters VGA with Audio Patch cord in existing conduit. Approved Mamkes :Lightware/Kramer/RGB Spectrum.

Supply and Laying of 3.0 Meters 4 K HDMI patch cord in existing conduit. Approved Makes : Lightware/Kramer/ RGB Spectrum.

Supply and Laying of 1.8 metres 4 K HDMI Patch cord in existing conduit. Approved Makes : Lightware/Kramer/ RGB Spectrum.

Supply and Laying of 1.8 metres 4 K HDMI to DVI Patch cord in existing conduit. Approved Makes : Lightware/Kramer /RGB Spectrum.

Supply and Laying of 15.2 Meters USB 3.0 Active Extender Cable in existing conduit. Approved Makes : Lightware/Kramer/ RGB Spectrum.

Supply and Laying of HD Base T recommended 23 AWG shielded CAT6A Cable 100 m spool with appropriate connectors in existing conduit. Approved Makes : Lightware/Kramer/ RGB Spectrum.

Supply and Laying of sheiled connection for 23 AWG shielded CAT6A Cable. Approved Makes : Lightware/Kramer/ RGB Spectrum.

Supply, Installation, Testing, Commissioning of Speaker with below Specifications : - Transducer Size : 2 x 6” LF Driver + 1 x 1* Diffraction Horn HF Power Handling : 250 Watts Continuous 1000 W Peak. Freq. Response : 75 Hz – 26 KhZ. Dispersion : 160 x 40 Sensitivity : 91.5 Db Max. SPL : 115Db Continuous, 121 dB peak Approved Makes : OHM, British Acoustics, D& B,Ahuja, Martin Audio, audac,L-Acoustics, Renkus Heinz.

Supply, Installation, Testing & Commissioning of Class D Power Amplifier with below specifications : - Number of Channels : 2 Power at 4 Ohms per channel : 1000 W Powr at 8 Ohms Per channel : 500 W Class –D with LCD Display for critical factors, dual step power factor correction, puilt in corssoever to set HPF & LPF Filters. Approved Makes : OHM, British Acoustics, D&B, Martin Audio, L-Acoustics, bosch,Renkus Heinz, Powersoft, Lab Gruppen

Supply Installation Testing & Commissioning of a 8 Channel Live Mixer with Bluetooth Playback & a built-in soundcard. Approved Makes : British Acoustics Line 6, Presonus, Yamaha.

Supply, Installation, Testing & Commissioning of Wireless Handheld Microphone Transmitter with the below specifications : - Microphone with Display on Transmitter, Type : Dynamic, RF Power Output : 30Mw, Polar Pattern : Buttom Transmitter, Battery Operation time : 8 hour with rechargeable battery, Range : 100 meters, PLL synthesized Circuits, Approved Makes : Shure, OSL, Sennheiser, Beyerdynamic

Supply Installation Testing & Commissioining of a 2.5 sq.mm., 2 Core Speaker Cable with the below specifications : - Core Arrangment : 2 Guage : 2.5 sq.mm. Materials : Stranded Bare Copper –Oxygen Free, Shielding : Unshielded, Jacket Material : TPR, Bend Radius : 4 x Diameter, Approved Makes : LYNQ, Sommer, Belden, Netmas

Supply, Installation, testing and commissioning of UL Listed Connectors as epr the tender specifications Approved Makes : LYNQ, Neutrimk, Northfit, Amphenol, Switchkraft

Supply, Erection, Testing & Commissioning of 12U Rack with wheels, Reputed Make.

GST

Labour Cess