East Central Railway Tender

Installation, wiring testing and commissioning of fuses indication cum monitoring and automatic changeover system.

Supply and instrumental Calibration of RJ-45/RJ-11 Crimping tool (Make Digilink, Model-DC Tool CRIMP or better). Inspection-Consignee

Design, fabrication & supply of fuse Auto Changeover system for 32 Nos. of external 12 Non Deteriorating type or 'G' Type fuses from 0.6 Amp to 4 Amp capacity including Extender fixing plates of stainless steel of 1.5 mm with suitable fixing holes as per RDSO spec no.- RDSO/SPN/209/ 2012 Rev 2.0 or better. Inspection RDSO

Supply and configuration of Relay Testing Jig with the following hardware requirement are required to be adhered to for the Relay Test equipment - Test Equipment for QN1 & QNA1 series of relays covering 12F4B, 8F8B, 8F4B, 6F6B, 4F4B relay types. Microcontroller-based Relay Test Equipment with an inbuilt database that would store, prepare & print test results. The requirement also specifies for a HDMI port and a USB communication port. 1) The test equipment should be microcontroller based 2) Should include low noise and high accuracy/high resolution A/D converter 3) The equipment should be provided with a 7" touch screen display for frontend - graphic user interface (GUI) and an additional Liquid Crystal Display (LCD - 16 x 2) - to displays the relay type being tested and the progress of relay testing cycle 4) Should be equipped with a HDMI port for connecting to an external display 5) A Universal Serial Bus (USB) based communication interface to export test data to IBM PC compatibles. 6) A wireless keyboard and mouse 7) A plug board to securely place the Relay to be tested 8) Powder coated mild steel cabinet. Inspection- RITES

Supply and installation of channel of Earth Leakage Detector as per RDSO Specn. No. RDSO/SPN/256/2002 as per attached annexure "A". Inspection- RITES

Provision and adjustment of tool kit for JE/SE/SSE for Maintenance as per tech spec. given below: (1) Digital Multi Meter suitable for axle counter ranges 20 Amp AC/DC make protek 506 or better - 1 no. (2) Digital clamp Multi Meter range up to 100 Amps for AC/DC current make SEW or better - 1 no.(3) Leather Tool Bag for keeping tool kit -1 no.(4) Plier Sealing with sealing code bit -1 no.(5) Plier Wire Cutting 8""make Taparia or better-1 no (6) Nose Plier 4""make Taparia or better-1 1 no. (7) Wire Stripper -1 no. (8) Screw Driver set mutli port type -1 set (9) Track shunt resistance .5 ohm -1 no.(10) Soldering Iron 230VAC/65 watt -1 no. (11) Soldering Iron 230V AC/35 watt with diffrerent type replacement soldering head - 1 no. (12) Soldering Iron 110VAC/35 watt -1 no. (13) Mesuring Tape steel 30 meters - 1 no. (14) Mesuring Tape steel 3 meters - 1no. (15) Rechargable Torch Superior quality -1 no.(16) File Flat 8"" long - 2nos. (17) File Round smooth 8"" long -2 nos.(18) File Flat Bsterred 8"" long -2 nos. (19) Electric Drill Machine Portable 6mm make wolf or better. Inspection RITES

"Supply & Installation of MS Stand of dimensions 80'' X 21'' with 7MM holes, suitable 18 for Installation & ommissioning of Fuse Auto Changeover System as per RDSO Spec. RDSO/SPN/209/2012 along with necessary accessories like Triangular Base, Insulators, Nuts, Bolts, support angles etc. Inspection- Consignee "

Provision and adjustment of maintenance tool kit make Rishabh or better.This 2 includes: (a) Digital multimeter, Model no.Rishabh 6016 or better. (b) Digital insulation tester, model no. RISH Insu 20 or similar or better. (c) Digital clamp meter, model no. RISH Clamp 300A AC/DC or better. Inspection RITES

Supply of Krone tool. Inspection- Consignee

"Supply and testing of Integrated cable route tracer and RFID marker locator of reputed make, Reference specifications model No. 3M 2273M-ID or higher version of reputed make. Inspection-RITES"

"Supply and installation of Mother Board of Earth Leakage Detector as per RDSO Specn. No. RDSO/SPN/256/2002 as per attached annexure "A". Inspection- Consignee "

Supply & Installation of Earth Leakage Detector with 08 Chanel for monitoring of 4 AC 11 Channel (110V AC) & 4 DC Channel (110VDC-1 No., 24V DC-3 No.) (In 19"sub rack with insulation Tester ) as per RDSO Sepecification No.RDSO/SPN/256/2002 with latest ammendment. Make-Anu Vidyut or better. Inspection- Consignee

Design, fabrication & supply of fuse Auto Changeover system for 24 Nos. of external 14 Non Deteriorating Type or 'G' Type fuses from 4 Amp to 10 Amp capacity including extender fixing plates of stainless steel of 1.5 mm with suitable fixing holes as per RDSO spec no.- RDSO/SPN/209/2012 rev 2.0 or latest. Inspection RDSO

Installation, wiring testing and commissioning of fuses indication cum monitoring and automatic changeover system.

Supply and Systematic Calibration of Optical Time Domain Reflectometer (OTDR) for 1310/1550nm fiber with resolution of 60 Cms,dynamic Rangeof 314/29 dB with all accessories confirming to TEC Specification NoTEC Specification No G/OTD/02-03 March 2009.Make EXFO Model MAX 720C , AQ-7270+735022.Make Yokogawa Electric Co Ltd Japan or better. Inspection-Consignee

Supply and testing for accuracy of Micro Controller based (direct in dB reading) LF + HF Quad Cable Cross Talk & Loop Attenuation Meter Model EPAX - LH 1930UC or better. Inspection- RITES