Building Construction Department Tender

Providing and fixing floor sticker showing accessible parking and rickshow stand as symbol on pavement as shown on access audit report attached with dpr. size 1500 mm x 1800 mm thickness 3-5 mm waterproof for external use all complete with labor mad material as per engineer in charge

Carriage of materials from source to site work including loading & unloading all complete job as per specification and direction of E/I

Sand

110 mm 45 degree offset (Supreme, Prince, Astral or Equivalent ) P.V.C.

Bend 87.5° 75 mm bend

20 mm nominal outer dia Pipes

Supplying , Fitting and fixing the following items complete with all material as per speciifation and direction of E/I (C) (i) C.P brass dish container medium quality with Screw and hinges Etc.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Add 1% Labour Cess

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Supplying fitting fixing warning block around tree, each tree surrounds consists of 4 nos panel of 750mm x 750mm x 40mm-100mm Thickness to 900mm x 900mm x 40mm-100mm Thickness. Overall dimension 1500mm x 1500mm x 40-100mm / 1800mm x 1500mm x 40-100mm. Suitable reinforcement for long use and to prevent damage during transporting and handling RCC-M-30 Pre casted with 6 mm dia reinforcement as shown on access audit report and action plan attached with dpr all complete with labor and material as per engineer in charge.

75 mm Plain Trap (Supreme, Prince, Astral or Equivalent ) P.V.C.

Bend 87.5° 110 mm bend

Shifting of controls and switch to mentioned height and flushed to the wall, door kept closed and wiring canceled, the operatable part of the controls such as vending machines, electrical switches, wall socket should be located adjacent to the clear floor space with dimension of at least 900 mm x 1200 mm recommended height for antenna / telephone- 400 mm, switches, push button-900-1100 mm outlet-600mm minimum, pull switch 700-800mm outlet around bed -800 mm as shown on access audit report and action plan attached with dpr all complete with labor and material as per engineer in charge.

Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

Supplying fitting fixing pedestrian crossing at campus entrance making accessible for ramp and vehicle with proper slope with color and texture contrasting edge definition, minimum slope between road and crossing to accommodate lower floor vehicle as shown on access audit report and action plan attached with dpr all complete with labor and material as per engineer in charge.

Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Supplying installation testing and commissioning alarm with switch for toilet including switch and speaker with concealed wiring making surface good as previous, switch to be provide at handicapped toilet at accessible height for wheel chair as shown on access audit report and action plan attached with dpr all complete with labor and material as per engineer in charge.

Supplying fitting fixing aluminum threshold for undulated wheel chair entry to room / building as shown on access audit report and action plan attached with dpr all complete with labor and material as per engineer in charge.

Supplying fitting fixing 2 way bib cock with wall flange Jaguar Make Model No:-OPP-15041PM or Equivalent all complete with labor and material as per engineer in charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External Work.

Providing and fixing PVC Pipe fittings with all accessories (Supreme, Prince, Astral or Equivalent )

Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 and including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I

Coloring controls and switches color – contrasting with the surrounding face plate panel and the face plate contrasting with the background wall on which the mounted as shown on access audit report and action plan attached with dpr all complete with labor and material as per engineer in charge.

Brick

110 mm Cowel (Supreme, Prince, Astral or Equivalent ) P.V.C.

Supplying fitting fixing hot and cold drinking water facility catering to need of different types of users should be provided at regular interval and at identifiable location. Leaver type taps to be provided in all drinking water fountains make Kent, Oasis, Doctor or equivalent as shown on access audit report and action plan attached with dpr all complete with labor and material as per engineer in charge.

Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Single tee with door 110x110x110 mm

Supplying fitting fixing Sign board / name plate with brail embossing near door for Way finding and signage strategies should include the following:- I. Information about services and facilities. II. Direction to facilities and functional spaces, service counter, exits and key areas. III. Identification including room sings and room numbers, facilities and equipment, stair sings and floor numbers. IV. Safety notice such as warnings, prohibitions. V. Hazards, fire exits and refuges. Words, pictorial sings and symbols should be used consistently within the same site and building. Such facility should be identified by international symbols of accessibility. Way finding information can be provided in a range of alternative formats. These include, for example, large print maps, tactile directories with audio-described directions or raised letters on sings. Way finding signage should be large sans serif text set in good visual contrast to a matt background. Way finding signage should be use simple language, with upper and lower case letters and should be supported by internationally recognized pictograms or symbols. Inaccessible routes shall have directional signage to indicate the route to the nearest accessible entrance. Where illumination of a sing is needed, the light source should be shielded from the viewer to prevent glare. Signage and letters Size as per table for viewing distance as mentioned in access audit report and action plan attached in dpr, all complete with labor and material.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc

Supplying fitting fixing Beeper at guard room with mic and speaker (speaker for external use) for alerting system for handicapped as shown on access audit report and action plan attached with dpr all complete with labor and material as per engineer in charge.

Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

Providing and fixing PTMT grating of approved quality and colour. 125 mm nominal dia with 25 mm waste hole

110 mm Plain Trap (Supreme, Prince, Astral or Equivalent ) P.V.C.

Supplying fitting fixing dustbin permanently located to one side of any path or walkway so as not ecroch on walkway width, waste receptacles should be securely mounted on firm level pads, waste bin should be clearly identified by suitable signs and color, where lids are provided on waste receptacles, they should be easy th operate with one handed and have big opening mounted no higher than 1065 mm form grade. Recommended west bins shown on access audit report attached with dpr, two number of bins to be provided for different use on one set. Size of bin 450mm x 450 mm x 750 mm 2 nos and MS holdings structure extra as required with cover , material gauge steel with best paint for external use as all complete with labor and material per engineer in charge

Providing coarse clean local sand in filling in foundation trenches or in plinth including ramming and watering in layer not exceeding 150mm thick with all leads and 1.5M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer Incharge (Mode of measurement compacted volume)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore

Non Schedule

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 m including all lifts, levelling , ramming the foundation trenches, removing roots of trees, serbs all complete as per approved design,building specification & direction of E/I.

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.

Supplying fitting fixing Braille plate identification to be provided on the hand rail to indicate location with Braille and roman embossment, as shown on access audit report and action plan attached with dpr all complete with labor and material with embossment as per engineer in charge.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thic

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

15 mm nominal outer dia Pipe

Add 12 % GST

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular shape 450 mm dia

Supplying fitting fixing 38 mm thick aluminum nosing strip, lenght full stair width with visual contrast on the top of nosing as mentioned in access audit report and action plan attached in dpr, all complete with labor and material.

Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resin of standard make with Aluminium fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l.

Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with "p" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l. (A) With "P" trap (b)10.0 lit. low level P.V.C. cistern

Retro- reflectorised Traffic signs (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing) 60 cm x 45 cm Rectangular

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter

Supplying Emergency Evacuation chair / Emergency escape scuttle with hand wheel, smooth operating in stair and undulated surface with proper belt and sitting material hi class finishing as shown on access audit report and action plan attached with dpr all complete with labor and material as per engineer in charge.

32 mm nominal outer dia Pipes

Supplying fitting fixing Hand Shower (health Faucet) with 1 meter long easy flex tube in chrome finish & wall hook Jaguar Make Model No:- ALD-565 or Equivalent all complete with labor and material as per engineer in charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe. 32 mm dia

Supplying fitting fixing reception modular desk model number (steller-OZ 821827TCR) or equivalent Length of Table Top ±10(mm) : 1500 millimeter, Depth of Table Top±10(mm) : 750 millimeter, Height of Table Top±10(mm) : 750 millimeter, Width of the storage unit ±10(mm)400 millimeter, Depth of storage unit±10(mm)-485 millimeter, Height of smallest storage unit ±5(mm)- 100 mm, Height of medium storage unit ±5(mm)-150 mm, Height of largest storage unit ±5(mm)-230 mm, 25mm thickness three layer pre-laminated Particle boards (Wood Product) of grade II Type II of IS 12823 Latest, 18 mm thickness Flat single layer pre-laminated MDF board conforming to having designation PLMDF - 23 of IS 14587 Latest, Table Top Finish Melamine finish/Polish as shown on access audit report and action plan attached with dpr all complete with labor and material as per engineer in charge.

75mm 45 degree offset (Supreme, Prince, Astral or Equivalent ) P.V.C.

Retro- reflectorised Traffic signs (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing) 80 cm x 60 cm Rectangular

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile C Fixing with adjustable lugs with split end tail to each jamb

Single tee with door 75x75x75 mm

Supplying fitting fixing Single lever basin mixture with popup waste with 450 mm long braided house Jaguar Make Model No:-OPP-15051BPM or Equivalent all complete with labor and material as per engineer in charge.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Single tee without door 75x75x75 mm

Supplying fitting fixing Inspection Chamber cover or Open Gutter Cover with Special grating , holes shall not exceed 20 mm x 20 mm , slots of grating shall not exceed 13mm wide slots of grating shall be parallel with pedestrian travel path as shown on access audit report and action plan attached with dpr all complete with labor and material as per engineer in charge. size of cover upto 600 mm x 900 mm.

Supplying fitting fixing Signboards showing Accessible Entrance/ parking, Accessible rout, Drinking water, Handicapped Toilet, Lift, Fire Extinguisher, Lift, No access, Emergency Evacuation Chair, etc as mentioned on audit report . sign board should be located where they are clearly visible, external sign should be placed in logical and visually unobstructed location, while ensuring that growth of adjacent foliage will not interfere with visibility. Signage should be contrasting colors in distinct relief to allow visually impaired person to obtain the information by touch. Simple symbols and contrasting colors which are universally recognized should be used, e.g. green for safety or go, yellow or amber for risk and caution and red for danger. Efforts should be made to locate signs where the reader does not obstruct circulation paths. Pictorial sings should be located at major junction throughout the building for easy way finding. Prominent visible signage using the international symbol of accessibility, identifying accessible entrance and exit, reserved car parking, presence of toilets for persons with disabilities, drinking water fountain, stairs, lifts, and availability of special services to be provided at all strategic locations. Directional signs in the reception/lobby/corridors/stairs indicating the location of accessible facilities like drinking indicating the location of accessible facilities like drinking water fountain, toilets and emergency exits to be provided. The signage size to be complying with not less than 60 mm for door, 110 mm for corridors and 200 mm for external use. All visual signage in the building to be uniform and with high color contrast. Reflection can be avoided by using matt surfaces. All signage should be multi lingual, provided in English, Hindi and local language and provided with Braille and Tactile Supplements. Signage and letters Size as per table for viewing distance as mentioned in access audit report and action plan attached in dpr, all complete with labor and material.

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length

25 mm nominal outer dia Pipes

Single tee without door 110x110x110 mm

Earth filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation foundation trenches within a lead of 50M and lift of 1.5M all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Aggregate

Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/l.

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore, weighing not less than 32 gms

Marking and Proper cutting of floor for providing 300 mm tactile flooring tiles strip with Concrete joint cutting machine with disposal of waste and cleaning surface all complete as per E/I

Supplying fitting fixing Paper Holder with Flap Recessed Type ( Stainless Steel) Jaguar Make Model No:- AHS-1553 or Equivalent all complete with labor and material as per engineer in charge.

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

40 mm nominal outer dia Pipes