University Of Jammu Tender

Providing and laying stone soling size on level ( Hand packed ) Watering ,ramming complete below foundation & rooms including carriage

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without CB/RCCB/Isolator) 12 way , Double door

Group A Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. note: all items included like Conduit, wire, box, switches etc

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material : 2.0.1 All kinds of soil :

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Supplying, fixing of MCCB MS door type Enclosure suitable for 125 Amp 4 P MCCB

Supplying and fixing 6 A to 32 A rating, 240/415 V, 10 kA, “C”-curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing, fixing and Cladding with 3 mm thick matt finish Aluminium composite panel with all fixing arrangements on lift wall with hinges/catchers etc as per sie requirement.

Providing, fixing, testing and Commissioning of TPN 63A RCCB 100-300mA including Double door enclosure suitable for RCCB as per requirement

Supplying, Fabrication, erection Construction of Lift Supporting steel Structure to hold the Elevator duly painted with multi coats after the applying the redoxiide 2 coats. The strucure should bear the load with in safe limits and the safety factor be on max. higer end should be OEM elevator recomanded and approved the Authorities, all material should be ISI marked

Providing and Fixing of LED Bluck Heads 9 Watt

single pole

Supply of advance maintenance free Chemical Gel Earthing of Dual Pipe Technology (GI) of 3 mtrs long 80 mm dia of outer shell (MS) with the 50 mm dia of inner shell (MS) of 80-100 microns galvanized CHEMRODE filled with highly conducting metallic compounds with the permenant sealings at both the ends with the lead terminal of 50x10mm size at the top. The electrode shall be duly tested and certified by CPRI (Central Power Research Institute), Govt of India for a peak short circuit withstanding capacity of 60 KA. including Supply/ fixing of environment friendly rust proof heavy duty weather proof polyplastic earth pit chamber.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : 6.1.1 Cement lime mortar 1:1:6 ( 1 cement : 1 lime putty : 6fine sand)

C.G.I. SHEETS ROOFING Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (SSR12.1.1) 1.60 mm thick with zinc coating not less than 350 gram/m2

Double pole

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Supply, Installation, Testing and Commissioning of 20KVA servo stabilizer Digital Microcontroller Servo Voltage Stabilizer In-door type with fresh dehydrated oil. With protection, complete in all respects. Technical Specifications of 3 Phase Servo Stabilizer: Capacity : 20 KVA, Type : Un-Balanced 4 wire system( with Buck- Boost Transformer) Method of Cooling : Oil Cooled, Phase : 3 Phase, 4 wire, Frequency :50 Hz, Input Voltage : (P-P) 230-460 (P-P), Output Voltage : 415 V +-1%, Efficiency : 98% at full load, Operation Temperature : 45 Degree Celsius above ambient Relative Humidity : Up to 90%, Correction Speed : Up to 35 V/sec No load current : Less than 1.5% of rated current BBT : CRGO core material 0.23mm thickness Metering : LCD , Analogue or Digital ( as per requirement), Indication : Indicators for phase failure, over-load and over-voltage Controls : Auto/Manual Selector Switch, Increase Decrease Toggle Switch for Manual Operation, Output Switch Protection : Input High and low cut off, Output High and low cut off, Overload, Short-circuit protection, Time Delay Protection, Class of Insulation : “A”, Fabrication Box Paint : 7 Process Powder Coated, System construction : As per IS 9815 Independent Phase Control : Maintain each phase voltage stable irrespective of unbalanced load, Transformer Winding : Copper 99.9% Pure, Duty Cycle : 100%, Container: 14 SWG with Stove enamelled paint, Cable Box and Busses : BAR suitable size of cable box with 6 aluminium busbars (3 for input, 3 for output and 1 for neutral), Regulator : Toroidal Type, Oil capacity : As required Paint : Powder Coated, Color : RAL 7035 (Polyester Powder Coating) System Construction : AS per IS-9815 including CMC for 3 years from the date of handing over

Note. The quoted percentage (%age) should preferably be in fractional form in order to minimize concurrence of similar quoted rates

CEMENT PLASTER IN TWO COATS (SSR 13.12) 18mm Cement plaster in two coats under layer 12mm thick cement plaster 1 : 5 (1 cement : 5 coarse sand) finished with a top layer 6mm thick cement plaster 1 : 6 (1 cement : 6 fine sand)

CIVIL LIFT PIT Construction

Cutting of Slab to make a suiable suitable duct size, to install the lift holding strucure by skilled workers

Supplying, fixing, testing and commissioning of following Amperes of MCCBs with spreader links 125 Amp 36KA 4 pole

Supplying and fixing following rating, TPN, 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required 63 A

Design, Supply, Installation, Testing and Commissioning of G+3 Passenger Elevator including system control panel and with following specifications 1. General Specifications: Capacity/Load:6 persons (Gearless Machine Room-Less, MRL) Speed: 1 meter per second (MPS) Type of Drive: Variable Frequency (VF) Regenerative, closed-loop, Stops: 4 (Ground Floor, 1st, 2nd, 3rd, 4th Floors) Rise: To be determined as per building height, Power Supply: 400/415 volts, 3-phase Operation Type: Full collective with simplex (one-car) control, Free Maintenance: CMC for 3 years from the date of handing over Safety Features: Emergency braking system, overload protection, wire less wifi enable dome camera, fire alarm integration, Automatic Rescue Device (ARD) and other standard features. Speakerphone: Hands-free speaker and microphone for clear communication between the cabin and the operator Door Sensors: Infrared or multi-beam sensors for obstruction detection Buffering System: Oil or spring buffers in the pit for safety during landings Connectivity: Integration with building management systems (BMS) and IoT-based predictive maintenance for enhanced operational efficiency. 2. Machine and Drive: Machine: PM Gearless motor, located in the shaft, mounted on top of guide rails Control: ACD3-MRL or equivalent controller with Auto Rescue Device (ARD) system for automatic operation 3. Car and Hoistway Doors: Car Entrance Doors: Single front entrance at all floors. Hoistway Entrance Doors: Central-opening (CO), stainless steel (SS) with galss hairline finish Car and Door: Galss Stainless steel, Landing Door Finish: Stainless steel, 4. Interior and Design Features: False Ceiling Type: CD-41 or equivalent, False Ceiling Finish: Stainless steel, Handrails: Stainless steel, mirror finish on all sides of the car, Flooring: Granite, Car Position Indicator & Hall Button Arrangements: LCD monochrome dot matrix display with multi-color indicators/ Digital Display typically LED or LCD-based Traction Media: Flat coated steel belt for smooth operation Car Operation Panel (COP): 950mm high, made of stainless steel, Ventilation: Equipped with cross-flow fans for proper air circulation Car and Hoistway Door Type: Central Operating (CO) doors User Interface: LCD display panels, voice annunciators, and customizable buttons for ease of use.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing of Heating points for lift using 4 sq.mmPVC insulated copper wire through 1” 2mm PVC conduit/1” PVC casing capping and providing and fixing of 6/16 Amp. of Modular Switch/socket recessed in wall covered with modular sheet/ MS box of required size including providing and fixing of 4mm² PVC insulated copper wire t as earth wire, point taken up to D.B. duly tested and commissioned, complete point in all aspects

Wiring for circuit (lift)/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed in class heavy duty PVC conduit as required ) Note : Rates of Suitable PVC conduit included in above description for the follwing items of make 4 X 10 sq. mm + 1 X 10 sq. mm earth wire

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)