Small Scale Industries Development Corporation Limited Tender

Wiring for Light point/ Fan point / Exhaust fan point / Call bell point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, Modular plate, suitable GI box and earthing the point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable etc as required (ISI).

Group A :- 50 point

Group B :- 22 point

Wiring for Light /power plug with 2 X 4 Sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 1 No 4.00 Sqmm FRLS PVC insulated copper conductor single core cable for loop earthing (ISI)

Supplying and fixing bran batten/angle holder including connections etc as required (ISI).

Supplying and fixing suitable GI box with modular plate and cover plate infront of surface or inrecess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch connections etc as required (ISI).

Supplying and fixing suitable GI box with modular plate and cover plate infront of surface or in recess including providing and fixing 6 pin 5/6 and 15/16 A modular socket outlet and 15/16 A modular switch connections etc as required (ISI).

Supplying and fixing following way, Single pole and neutral sheet, MCB distribution board, 240V, on surface/ recess, complete with tinned copper bus bar neutral bus bar earth bar, din bar inter connections powder coated including earthing etc as required (But with MCB/RCCB/isolator) (ISI).

12 way, Double door

Wiring for Circuit / Submain wiring along with earth wire with the following size of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required .(ISI)

Earth wire 2 X 2.50 Sqmm + 1 X 2.50 Sqmm

Earth wire 2 X 6.00 Sqmm + 1 X 6.00 Sqmm

Supplying and fixing following rating double pole (SPN) 240v, residual current breaker (RCCB) having a sensctibity of current 30m A in the existing MCB DB complete with connections, testing and commissioning etc as required .(ISI).

63 A

Supplying and fixing 5A to 32A rating, 240v/415v,10KVA, 'C' curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc as required .(ISI).

Single Pole

Supplying and fixing of two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required. (ISI)

Supply and Installation of 10" X 10" LED panel of 24 watt (Make :- Crompton/Wipro/Philips/Havells)

Supply, Installation, testing and commissioning of celling fan of 1200mm, including wiring down the roads of standard length(upto 30 cm) with 1.5 Sqmm FRLS PVC Insulated copper single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc.(Make Crompton/Bajaj/ Usha/Philips/ Havels).

Supply and Installation of 2" X 2" LED panel of 36 watt (Make :- Havells/Wipro/Crompton/Philips).

Supply, Installation, testing and commissioning of exhaust fan of 300mm, shutter type in the existing opening including make good the damage, connections testing opening, commissioning etc. etc as required.(Make Crompton/Bajaj/ Usha).

Supply, Installation, testing and commissioning of 7 watt LED bulb on the existing angle holder including/PVC round sheet (Make Panasonic/ Havells/Syska).

Supplying, installation and testing making Internal wiring connections and commissioning of wall mounted distribution panel board with following details suitable for 415 Volts,3 phase,4 wire 50H2, AC supply. (a) Panel fabrication details. (i) Size 914mm X 914 mm X 610mm. (ii) MSCR Sheet (iii) Main frame 16 gauge sheet with lefting hooks. (iv) Partation with 16 gauge sheet. (v) Gland plates 16 gauge sheet. (vi) Powder coating semens grey. (b) Material list for panel board. (i) Providing and fixing following rating & breaking capacity and pole MCCB with the thermomagnetic release and terminal spreaders in existing cubical panel board including drelling holes in cubical panel making connections etc. (a) 100A, 30KA,FPMCCB - 01 No. (ii) Providing and fixing following capcity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drelling holes in cubicle panel, making connetions etc as required. (a) 63A TP&N - 01 No. (b) 32A TP&N - 04No. (iii) On load change over switch 4 Pole 63A - 01 No. Total cost of panel board including all wiring and all electrical and allied accessories.complete job

Supply, Installation, testing and commissioning of GI earthing Electrode (pipe in strip of length 2 metre with outer dia not less than 48mm and strip terminal size 40X6 and inner strip size 25X3mm with 25kg of grounf enhancing compound .(Make Truepower/ISI make).

Supply, Installation, testing and commissioning of fire extengushes ABC dry powder 6 kg (Make Save max/ Life gaurd/ Caseface).

Supply, Installation, testing and commissioning of Pir motion sensor for lighting automation.