Shri Mata Vaishno Devi University Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Shri Mata Vaishno Devi University - SMVDU Tender
Civil And Construction
Building Construction
Eprocure
Opening Date21 Dec 2023
Closing Date29 Jan 2024
Tender Amount₹ 8,23,65,833
Costs
EMD
₹ 16,47,300Document Cost
₹ 6,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_SM_240763_1Bid Award Id
ViewTender No
SMVDU/ENGG/TENDERS/23/41Tender Authority
Shri Mata Vaishno Devi University ViewPurchaser Address
-Website
http://https://www.smvdu.ac.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material :
-
-
-
All kinds of soil :
561.19
45821
81.65
Filling available excavated earth (excluding rock) in trenches, plinth, foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited sides of layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
1463.88
290873
198.7
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.
728.23
1597663
2193.9
Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.
189.42
149149
787.4
Supplying chemical emulsion in sealed containers including delivery as specified.
Chlorophriphos/Lindane emulsifiable concentrate of 20%
200
40140
200.7
Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for pre-constructional anti-trermite treatment and creating a continuous chemical barrier under and all round the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of the building, expansion joint, over the top surface of consolidated earth on which apron is to be laid surroundings of pipes and conduits etc., complete as per specifications (plinth area of the building at ground floor level only shall be measured for payment) , chloropyrifos emusifiable concentrate 20% with 1% concentration
728.23
142004
195
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
102
38030
372.85
Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.
(1 kg of water proofing material in 50 kg of cement)
33.66
1948
57.9
Applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7 kg per square meter on damp proof courses after cleaning the surface with brushes andfinally with a piece of cloth lightly soaked in kerosene oil.
102
13958
136.85
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:
-
-
-
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
189.49
837517
4419.85
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
121808.9
9653355
79.25
Add for plaster drip course/grooves in plastered surface or moulding to R.C.C. projections
654
36852
56.35
Providing and laying in position machine batched and machine mixed design mix M-25grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately.
-
-
-
All works upto plinth level
598.77
4306383
7192.05
Providing and laying in position machine batched and machine mixed design mix M-25grade cement concrete for reinforced cement concrete work, using cement content as preapproved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately.
-
-
-
All works above plinth level upto floor V level
768.17
6496605
8457.25
Add or deduct for using more or less cement in the items of design mix over and above the
specified cement content therein.
779.16
761001
976.7
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
Foundations, footings, bases of columns etc. for mass concrete.
726.42
190540
262.3
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
202.69
116313
573.85
Suspended floors, roofs, landings, balconies and access platforms.
2837.59
1803572
635.6
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
3045
1531178
502.85
Columns, pillars, piers, abutments, posts and struts.
2161.11
1469879
680.15
Stairs (excluding landings) except spiral staircases
40.32
32558
807.5
Edges of slabs and breaks in floors and walls
67.2
16282
242.3
Weather shades, chajjas, corbels etc. including edges
335.39
328363
979.05
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and de-centering at all levels, over a height of 3.5 m, for every additional height of 1 meter or part thereof (Plan area to be measured).
5.11.1 Suspended floors, roofs, landings, beams and balconies (plan area to be measured)
1500
401400
267.6
Brick work with common burnt clay (non-modular) bricks of class designation 75
-
-
-
Cement mortar 1:6 ( 1 cement : 6 coarse sand)
30.21
186811
6183.75
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
30.21
39987
1323.65
Half brick masonry with common burnt clay (non-modular) bricks of class designation
7.5 in foundations and plinth including curing in :
-
-
-
Cement mortar 1:4 ( 1 cement : 4 coarse sand)
1173.04
921540
785.6
Extra for half Brick masonry in superstructure above plinth level upto floor V level.
1173.04
170325
145.2
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.
1173.04
87684
74.75
Brick edging 7cm wide 11.4cm deep to plinth protection with common burnt clay (nonmodular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1Cement : 4 fine sand) and curing complete.
138.75
7464
53.8
Providing and laying autoclaved aerated cement blocks masonrywith150mm/230mm/300 mm thick AAC blocks in super structure above plinth level upto floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge.(200MM THICK+100MMTHICK QTY)
532.55
3908411
7339.05
Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, stairs, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels
-
-
-
Granite of any colour or shade (18mm)
133.7
531765
3977.3
Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
220.8
95451
432.3
Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete kitchen
32
22654
707.95
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
1019.81
1184050
1161.05
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length Sal wood
31.53
4416799
140082.45
Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.
-
-
-
Second class deodar wood - 35mm Thickness of shutter ( For Mesh Door Frame - 32nos. Of Mesh Doors, Width of Frame - 100mm )
60.48
230945
3818.55
Second class deodar wood - 30mm Thickness of shutter (For Windows Frame - Width 75mm )
338.16
1148847
3397.35
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to bemeasured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.
-
-
-
4 mm thick glass pane (weighing not less than 10 kg/sqm)
322.5
570196
1768.05
Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete.
-
-
-
With Galvanized M.S. Wire gauge with wire of dia 0.63 mm
199.32
253943
1274.05
With 2nd class teak wood beading 62x19 mm
-
-
-
Providing and fixing ISI marked flush door shutters conforming to IS: 2202
(Part I) decorative type, core of block board construction with frame of 1st class
hard wood and well matched teak 3 ply veneering with vertical grains or cross
bands and face veneers on both faces of shutters
-
-
-
With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws
449.36
1432492
3187.85
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured)
449.36
180373
401.4
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :
-
-
-
25 mm dia
390.4
189832
486.25
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete
-
-
-
100x58x1.90 mm
128
4755
37.15
75x47x1.70 mm
1176
35515
30.2
Providing and fixing bright finished brass handles with screws etc. complete :
-
-
-
125MM
64
13049
203.9
100MM
392
74166
189.2
Providing and fixing bright finished brass casement stays (straight peg type)
with necessary screws etc. complete.
-
-
-
250 mm weighing not less than 280 gms.
392
61014
155.65
Providing and fixing bright finished brass tower bolts (barrel type) with
necessary screws etc. complete. :
-
-
-
250x10 mm
576
214502
372.4
150x10 mm
784
180986
230.85
Providing and fixing bright finished brass door latch with necessary screws etc. complete. :
-
-
-
300x16x5 mm
32
8683
271.35
250x16x5 mm
224
57780
257.95
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete
256
36723
143.45
Providing and fixing chromium plated brass casement window fastener with
necessary screws etc. complete. :
1495
409106
273.65
Providing and fixing circular/hexagonal cast iron box for ceiling fan clamp,
of internal dia 140 mm, 73mm height, top lid of 1.5mm thick M.S. sheet
with its top surface hacked for proper bonding, top lid shall be screwed into
the cast iron/M.S. sheet box by means of 3.3mm dia. round headed screws,
one lock at the corners. Clamps shall be made of 12mm dia M.S. bar bent to shape as per standard drawing.
224
52684
235.2
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
1127.88
195010
172.9
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm
angle iron and 3mm M.S. gusset plates at the junctions and corners, all
necessary fittings complete, including applying a priming coat of approved
steel primer.
-
-
-
Using M.S. angles 40x40x6mm for diagonal braces
5.4
23505
4352.95
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.
-
-
-
50mm thick with 20 mm nominal size stone aggregate.
169.04
85365
505
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.
233.4
260427
1115.8
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete
-
-
-
Size of tile 600x600 mm In colour such as White, Ivory, Grey,Fume Red Brown
2473.16
3665223
1482
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades,in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete.
-
-
-
Size of tile 600x600 mm
291.6
446687
1531.85
Making khurras 45x45 cm with average minimum thickness of 5 cm
cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate
of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron,
finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a
coat of neat cement, rounding the edges and making and finishing the
outlet complete
24
5935
247.3
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.
-
-
-
(i) Single socketed pipes 110MM DIA PIPE
306
108568
354.8
Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion
-
-
-
12.59.5 Bend 87.5°
-
-
-
110MM DIA
48
8584
178.85
Providing and fixing un-plasticised -PVC pipe clips of approved design to
un-plasticised - PVC rain water pipes by means of 50x50x50 mm hard
wood plugs, screwed with M.S. screws of required length, including
cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse
sand) and making good the wall etc. complete.
-
-
-
110mm
240
73200
305
Providing and fixing to the inlet mouth of rain water pipe cast iron grating
15 cm diametre and weighing not less than 440 grams.
24
1620
67.5
CEMENT PLASTER (IN FINE SAND)
12mm Cement plaster of mix:
-
-
-
1 : 6 ( 1 cement : 6 fine sand)
4345.89
1050618
241.75
15mm Cement plaster on the rough side of single or half brick wall of
mix:
-
-
-
1 : 6 ( 1 cement : 6 fine sand)
2395.11
667277
278.6
18mm Cement plaster in two coats under layer 12mm thick cement plaster
1 : 5 (1 cement : 5 coarse sand) finished with a top layer 6mm thick
cement plaster 1 : 3 (1 cement : 3 coarse sand) finished rough with sponge
3544.05
1391394
392.6
6MM CEMENT PLASTER
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
2708.28
599884
221.5
Extra for plastering exterior walls of the height more than 10m from ground level for every additional height of 3m or part thereof.
768.38
49983
65.05
INTERIOR FINISHING - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
2708.28
403669
149.05
Finishing walls with acrylic smooth exterior paint of required shade on
3544.05
587426
165.75
New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) Applying priming coat:
-
-
-
With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
2192.04
130426
59.5
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface
6741
400078
59.35
Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work
6741
859140
127.45
Painting with synthetic enamel paint of approved brand and manufacture
to give an even shade.
-
-
-
Two or more coats on new work
2202.14
268551
121.95
Forming groove of uniform size in the top layer of washed stone grit
plaster as per approved pattern using wooden battens, nailed to the under
layer, including removal of wooden battens, repair to the edges of panels
and finishing the groove complete as per specifications and direction of
the Engineer-in-charge :
-
-
-
15 mm wide and 15 mm deep groove
1635.6
93883
57.4
Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.( 2 mm thick )
12993.33
2240050
172.4
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying
397.83
179441
451.05
:(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours.
-
-
-
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with wate(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.
-
-
-
The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed Slurry.
-
-
-
Providing and laying integral cement based water proofing treatment
including preparation of surfaces as required for treatment of roofs,
balconies, terraces etc consisting of following operations.
a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement
admixed with water proofing compound conforming to IS 2645 and
approved by Engineer-in-charge over the RCC Slab including adjoining
walls upto 300mm height including cleaning the surface before
treatment.
b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm
to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse
sand) admixed with water proofing compound conforming to IS 2645
and approved by Engineer-in-charge over 20mm thick layer of cement
mortar of mix 1:5 (1 Cement : 5 coarse sand) admixed with water
proofing compound conforming to IS 2645 and approved by Engineerin-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs) c) After two days of proper curing applying a second coat of cement
slurry using 2.75kg/sqm of cement admixed with water proofing
compound conforming to IS 2645 and approved by Engineer-in-charge.
d) finishing the surface with 20mm thick joint less cement mortar of mix
1:4(1 cement: 4 coarse sand) admixed with water proofing compound
conforming to IS 2645 and approved by Engineer-in-charge including
laying glass fibre cloth of approved quality in top layer of plaster and
finally finishing the surface with trowel with neat cement slurry and
making pattern of 300x300mm/sq 3mm deep.
e) The whole terrace so finished shall be flooded with water for a
minimum period of two weeks for curing and for final test. All above
operations to be done in order and as directed and specified by Engineerin-charge.
-
-
-
With average thickness of 120mm and minimum thickness at khurra as 65 mm
832.3
1077995
1295.2
External Development Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:
-
-
-
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
18.9
93430
4943.4
Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete,on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand)
-
-
-
Medium shade using 50% white cement and 50% ordinary cement.
108
118800
1100
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:
-
-
-
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)
8.1
47377
5849.1
RAIN WATER HARVESTING Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres.
-
-
-
All kinds of soil
71.25
13448
188.75
Supplying, filling, spreading and leveling stone boulders of size range 5 cm to 20 cm, in recharge pit in the required thickness for all leads and lifts all complete as per direction of Engineer-in-charge
18
10741
596.75
Supplying, fllting, spreading and leveling gravels of size range 5 mm to 10 mm, in recharge pit over the existing layer of boulders, in the required thickness for all leads and lifts all complete as per direction of Engineer in-charge.
18
14883
826.85
Supplying, filling , spreading and leveling coarse sand of size range 1.5 mm to 2 mm, in recharge pit in required thickness over the gravel layer, for all leads and lifts all complete as per direction of Engineer-in-charge.
5.4
4465
826.85
Providing 600 x600 mm perforated RCC manhole covers of M-25 grade cement concrete for RCC work
60
60000
1000
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :
-
-
-
Cement mortar 1:4 ( 1 cement : 4 coarse sand)
6.07
39462
6501.2
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:
-
-
-
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
1.58
6983
4419.85
Carriage of Cement avg. 50kms from Jammu 16018 bags (800.90 ton)
800.9
433599
541.39
Carriage of Sand avg.25kms from Nagrota
1183.87
465284
393.02
carriage of Stone aggregate avg. 40 kms from jammu
1368
714944
522.62
Carriage of Bricks from Avg. 60 kms
81.23
150672
1854.89
Carriage of AAC Blocks avg. 60 kms from Jammu
21302
170416
8
Carriage of Steel avg. 50 kms from jammu
122
66049
541.39
Plumbing Works /Water Supplies
-
-
-
Internal work- Exposed on wall
-
-
-
Providing and fixing of Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pipes as per IAPMO IGC- INDIA 308, UMC-1TM certification marked on the pipe at the interval not greater than 1 meter with nominal pipe size with manufacturer’s name or trade mark including all relevant DZR brass fittings as Female Elbows/Tees, MTC /FTC and Engineering plastic fittings with internal sealing system like Eq. elbows, Eq. tees, reducers, Straight couplers, Clamps at one meter spacing, with PAP valves and brass tank Nipples etc. Including testing of lines and joints as per Engineer in charge. Make Kitec , Maithilee and Vista.
-
-
-
2532 (32 MM OD) PIPE
570
298879
524.35
3240 (40MM OD) PIPE
320
216704
677.2
Conceal Inside the Walls
-
-
-
Providing and fixing of Polyethylene/Aluminium/Polyethylene (PE-AL-PE) Composite Pipes as per IAPMO IGC- INDIA 308, UMC-1TM certificationmarked on the pipe at the interval not greater than 1 meter with nominal pipe size with manufacturer’s name or trade mark including all relevant DZR brass fittings as Female Elbows/Tees, MTC /FTC and Engineering plastic fittings with internal sealing system like Eq. elbows, Eq. tees, reducers, Straight couplersConnectors, clamps at one meter spacing, with PAP valves etc.Make Kitec , Maithilee and Vista. Concealed installation including cutting chases and making good in the wall etc, Complete in all respect. (Cold and Hot)
-
-
-
1620 (20MM OD) PIPE
1320
667392
505.6
1620 6MM PRE-INSULATED PEX PIPE
290
230196
793.78
External Work including trenching and refilling etc. complete
-
-
-
Providing and fixing of Polyethylene/Aluminium/Polyethylene (PE-AL-PE) Composite Pipes as per IAPMO IGC- INDIA 308, UMC-1TM certification marked on the pipe at the interval not greater than 1 meter with nominal pipe size with manufacturer’s name or trade mark including all relevant DZR brass fittings as Female Elbows/Tees, MTC /FTC and Engineering plastic fittings with internal sealing system like Eq. elbows, Eq. tees, reducers, Straight couplersConnectors, with PAP valves etc.Trenching, re filling and testing etc. Complete as per Engineer In Charge.Make Kitec , Maithilee and Vista.
-
-
-
1620 (20MM OD) PIPE
40
11116
277.9
2532 (32 MM OD) PIPE
60
26691
444.85
3240 (40MM OD) PIPE
80
45204
565.05
4050 (50MM OD) PIPE
160
126584
791.15
Providing Horizontal Open Well Submersible pumps 3 Phase, 5 HP, 3.7 kW, with flow upto 1050 LPM, Cast Iron Impeller, Cast Iron Casing and Body with CED Coating (corrosion protection) along with 3ph Control Panel. Make: Wilo, Xylem, Grundfos. WPO Raptor 50F/3 8224594, 3 Phase, 5 Hp, 3.7 kW, Max Head 54 meters, Max LPM 1100 liters, Suction 50mm and 50mm Delivery.
2
86234
43117
Internal work- Exposed on wall Providing and fixing of Polyvinyl Chloride Pipe (PVC) 4kg/cm2 (0.4 MPa) class II in accordance with IS 4985 certification marked on the pipe at the interval not greater than 1 meter with nominal pipe size with manufacturer’s name or trade mark including all relevant Engineering plastic fittings like tees, bends, couplers, y-tee, solvent etc. Including testing of lines and joints as per Engineer in charge . Make : Finolex or equivalent . 160 mm Polyvinyl Chloride Pipe (PVC) 4kg/cm2 (0.4 MPa) class II
620
943286
1521.43
Conceal In floor Providing and fixing of Polyvinyl Chloride Pipe (PVC) 4kg/cm2 (0.4 MPa) class II in accordance with IS 4985 certification marked on the pipe at the interval not greater than 1 meter with nominal pipe size with manufacturer’s name or trade mark including all relevant Engineering plastic fittings like tees, bends, couplers, y-tee, solvent etc. Including testing of lines and joints as per Engineer in charge . Make : Finolex or equivalent. Excavation of trenches, filling and concrete work is included in the quoted rate.
-
-
-
110 mm Polyvinyl Chloride Pipe (PVC) 4kg/cm2 (0.4 MPa) class II
290
344409
1187.62
75 MM Polyvinyl Chloride Pipe (PVC) 4kg/cm2 (0.4 MPa) class II
300
191970
639.9
External Work
Providing and fixing of Polyvinyl Chloride Pipe (PVC) 4kg/cm2 (0.4 MPa) class II in accordance with IS 4985 certification marked on the pipe at the interval not greater than 1 meter with nominal pipe size with manufacturer’s name or trade mark including all relevant Engineering plastic fittings like tees, bends, couplers, y-tee, solvent etc. Including testing of lines and joints as per Engineer in charge . Make : Finolex or equivalent . Excavation of trenches, filling and concrete work is included in the quoted rate.
-
-
-
160 MM Polyvinyl Chloride Pipe (PVC) 4kg/cm2 (0.4 MPa) class II
150
223461
1489.74
200 MMPolyvinyl Chloride Pipe (PVC) 4kg/cm2 (0.4 MPa) class II
230
427712
1859.62
Providing and Fixing of PVC over water tank UV Coated 2 Layers With ISI Mark(as per IS standards of approved make and quality)
16
408000
25500
Providing and fixing square- mouth S.W. gully trap class SP-1 complete
with C.I. grating brick masonry chamber with water tight C.I. cover with
frame of 300x300 mm size (inside) the weight of cover to be not less
than 4.50 kg and frame to be not less than 2.70 kg as per standard design.
20.3.2 150 x 100 mm size P type
20.3.2.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
30
69567
2318.9
Capacity : 2000 Litre
-
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III): 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
42
412479
9820.95
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
65106
21702.05
Extra for depth for manholes
-
-
-
Size 90x80 cm
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
22814
7604.95
Supplying and fixing C.I. cover without frame for manholes: 500 mm diameter C.I. cover (medium duty) the weight of the
cover to be not less than 58 kg.
30
94740
3158
Making connection of drain or sewer line with existing manhole
including breaking into and making good the walls, floors with cement
concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate
20 mm nominal size) cement plastered on both sides with cement mortar
1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat
cement and making necessary channels for the drain etc. complete
20.17.1 For pipes 100 to 250 mm diameter
8
4790
598.75
Constructing brick masonry road gully chamber of specified size with
common burnt clay(non modular) bricks of class designation 7.5 in
cement mortar 1:4 ( 1 cement : 4coarse sand) including precast R.C.C.
horizontal grating with frame complete as per standard design:
20.23.1 Chamber size 50x45x60 cm including precast R.C.C grating with frame 500x450 mm horizontal grating.
24
119734
4988.95
Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flush bend with fittings and C.I.brackets , 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid
64
481049
7516.4
Providing and fixing washbasin with C.I. brackets 15mm dia. CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:
64
297964
4655.7
(a) White Vitreous China wash basin size 550x400mm with a 15mm CP brass single hole basin mixer.
-
-
-
Providing and fixing C.P. WALL MIXER WITH BEND PIPE of approved quality conforming to IS standards.
64
215552
3368
Providing and fixing white vitreous china pedestal For wash basin completely recessed at the back for the reception of pipes and fittings.
64
92758
1449.35
Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per I.S.13983 with C.I.brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required:
-
-
-
Kitchen sink with drainboard
-
-
-
510x1040mm bowl depth 250mm
32
186540
5829.4
Providing and fixing 15mm nominal bore C.P. brass bib cock of of approved quality conforming to IS:8931
32
13968
436.5
Providing and fixing 15mm nominal bore C.P. brass LONG NOSE BIB COCK of approved quality conforming to IS standards and weighing not less than 810gms.
64
39977
624.65
Providing and fixing 15mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS: 8931.
448
294470
657.3
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
320
171552
536.1
Providing and fixing OVER HEAD SHOWER of approved quality conforming to IS standards.
64
43392
678
Providing and fixing SHOWER ROD 9” of approved quality conforming to IS standards.
64
20992
328
Providing and fixing TOWEL ROD 24” of approved quality conforming to IS standards.
64
67072
1048
Providing and fixing TOWEL RING of approved quality conforming to IS standards.
64
45312
708
Providing and fixing SOAP DISH of approved quality conforming to IS standards.
64
52992
828
Providing and fixing WASTE COUPLING 1.25” X 4” of approved quality conforming to IS standards.
64
16640
260
Providing and fixing P.V.C WASTE PIPE for sink or wash basin including waste fittings complete:
-
-
-
Semi rigid pipe
-
-
-
40mm dia.
96
13876
144.55
Providing and fixing P.V. CONNECTORS 18” of approved quality conforming to IS standards.
192
24960
130
Providing and fixing C.P. NIPPLE 1” of approved quality conforming to IS standards.
320
22400
70
Providing and fixing C.P JAALI (HOLE) of approved quality conforming to IS standards.
96
8640
90
Providing and fixing C.P JAALI (PLAIN) of approved quality conforming to IS standards.
96
7680
80
Providing and fixing HEALTH FAUCET WITH TUBE & HOOK of approved quality conforming to IS standards.
64
63872
998
Providing and fixing GEYSER 25 LTR of approved quality conforming to IS standards.
64
377600
5900
Providing and fixing GEYSER SINK MIXER WITH SWIVEL SPOUT of approved quality conforming to IS standards.
32
71616
2238
Providing and fixing 600x450mm beveled edge mirror of superior glass of approved quality complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
64
92361
1443.15
Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs, etc. complete.
64
53846
841.35
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group 'A'
1010
724170
717
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
20
21140
1057
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
2600
379600
146
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
1280
213760
167
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
1020
204000
200
2x 6 sqmm + 1x 6 sqmm earth wire
100
24900
249
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
40
13120
328
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
560
304080
543
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
2 Pair
600
12000
20
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
2500
82500
33
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required
-
-
-
25 mm
1800
162000
90
32 mm
700
64400
92
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.
-
-
-
200 mm X 250 mm X 60 mm deep
18
6030
335
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
Telephone socket outlet
35
4165
119
TV antenna socket outlet
98
11662
119
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
230
78660
342
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
290
9280
32
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
1 or 2 Module (75mmX75mm)
198
48114
243
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
306
122706
401
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
240
118800
495
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
96
6240
65
Supplying and fixing brass batten/ angle holder including connection etc. as required.
35
4095
117
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.
32
2944
92
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
-
-
-
2 run of cable
4000
328000
82
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group B
52
26416
508
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required.
98
57036
582
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 20/25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
64
40896
639
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
12 way , Double door SPN DB
8
16424
2053
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
6 way (4 + 18), Double door TPN DB
32
118176
3693
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single Pole
580
115420
199
Single pole and neutral
10
5440
544
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40Amp
35
29120
832
63 Amp
4
3356
839
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
10
62160
6216
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
100
13100
131
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
100
20600
206
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
17
7616
448
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run).
600
62400
104
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
200
32600
163
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
8
816
102
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1kV grade as required.
-
-
-
3.5 x 95 sqmm (45 mm)
20
9460
473
3.5 x 240 sqmm (62 mm)
4
3236
809
Supplying,Installation, testing and commissioning of pre-wired, 20W LED ,5700K CCT and aluminium body tubelight fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
320
192000
600
Supplying,Installation, testing and commissioning of pre-wired, 7W LED , 5700K CCT and PVC circular body conseal light fitting of all types, complete with all accessories etc. directly on ceiling, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
322
144900
450
Supplying,Installation, testing and commissioning of 9W LED Bulb directly on bulb holder etc. as required.
35
4725
135
Supplying,Installation, testing and commissioning of pre wired Surface mounted circular 15W LED down lighter luminior with die -cast aluminium housing in white housing white powder coated finish,anti-glare diffuser and energy efficient electronic driver , 6000K CCT , complete with all accessoriesetc. directly on ceiling, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
52
46800
900
Supplying,Installation, testing and commissioning of pre-wired, 10W LED Bulkhead , 6500K CCT complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
12
10800
900
Supplying,Installation, testing and commissioning of pre-wired, 10W LED mirror light, 1 feet tubelight Warm White pvc body complete with all accessories directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
64
32000
500
Supplying,Installation, testing and commissioning of pre-wired, 50W LED Flood Light , 5700K CCT complete with all accessories etc. directly on terrace/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
4
20000
5000
Supplying,Installation, testing and commissioning of pre-wired exhaust fan complete with all accessories etc. directly on wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
-
-
-
40W,200mm sweep Plastic body with louvers
64
105600
1650
50W,230mm sweep MS body
32
54400
1700
Supply and Fixing of ceiling fan (Aluminium Body) operating on max 50W, including wiring, the down rods of standard length (upto 30 cm) with 3x1.5 sqmm FRLS PVC insulated copper conductor single core cables,Phenolic sheet cover etc., as required to do the job in all respect in accordance with laid specification or upto the satisfaction of engineer in charge.
-
-
-
600 mm sweep ceiling fan high speed 70watt
96
182400
1900
1200 mm sweep ceiling fan upto maximum 50w
135
324000
2400
Supplying and fixing sheet steel box duly painted of required size with hinged cover gasket and tagblock with nesecesiry bridge chrome make.
-
-
-
50 pair
2
3000
1500
Supplying and fixing of TV outlet and push plug with 4 way / 3 way splitter special with hylam sheet complete with MS outlet box duly painted.
64
32000
500
Supply, Installation, Testing & Commissioning Wifi router With POE Port Gigabit Range 5.GHZ Speed With 30 to 50mtr range 10/100/1000 Gigabit With Wifi 6 series Approved Make - Dlink, Digisol, Netgear
8
344080
43010
Suppy, Installation, testing & Commissioning 64 Port Gigabit POE Switch with 250mtr Power Range 64POE Port 100/1000 Giga, Manageable Switch Approved Make - Dlink TP-Link , Netgear
6
84360
14060
Supply, Installation, Testing & Commissioning 24 Port Pacth panel Approved Make - Dlink, Digisol, Netgear
6
45576
7596
Supply, Installation, Testing &Commissioning CAT6 1Mtr patch Cable with 1GHZ Data Transfer Rate Approved Make - Dlink ,Digisol, Hikvision
160
53440
334
Supply, Installation, Testing & Commissioning CAT6 3Mtr Patch cable Approved Make - Dlink, Digisol, Netgear
160
106400
665
Supply, Installation, Testing & Commissioning Of fully Loaded 19u Wall Mount Rack With Manageable Tray ,Fans , PDU , Hardware Sets Approved make - Dynamic , Maczone
2
54000
27000
Supply, Installation , Testing & Commissioning Of 2 Core Armed Optical Fiber cable for Lease Line of ISP Approved make- Rit, Digisol
250
11250
45
Supplying ,erection and commissioning of compartment TP&N dustribution board with Bus Bars 200 amp comprising of sheet steel enclosure 1.6mm suitable for each flats recording data as metering and placed on each floors i/c all interconnections with PVC insulated copper conductor cable with following mountings as required as per specifications.
a) 160A 4 pole MCCB (25KA) - 1 Nos
b) 63A 4 pole TPN MCB (10 KA) - 9 Nos
c) 20 - 60 A three phase energy meters (unbalanced load)
(Each energy meter space to be housed in separate enclosure with sealing arrangement) - 9 Nos
4
600000
150000
Supplying, Installation, Testing and Commissioning of dust, damp and vermin proof free floor standing factory built sheet steel enclosed modular construction extendable panel, suitable for operation on 415 + 10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with 1.6mm thick CRCA sheet, hinged doors of 1.6mm thick CRCA sheet, duly painted complete with aluminium bus bars, interconnection with solid copper conductor wires / aluminium strips, neutral links, earth bus etc. necessary metering protections & indications and mounted with the following as per drawing and technical specifications attached etc. complete as required.
-
-
-
Incoming: 315 Amp FP, 36 kA MCCB rotary handle with spreader link - 1No. 3 Nos. Phase indication LED lamps with 2 Amps back up MCB, breaker ' ON/OFF' indicating light with 2A MCB 1 No. Intelligent multi-function digital panel meters of class 0.5 accuracy with communication interface port R 485 for recording V (Between Phases and between each phase and neutral, A (In each phase and neutral), KWHr with suitable rating CTs, CT shorting links, R,Y, B LED indicating lamp and 2 A control SP MCB's.
-
-
-
Bus Bars: Electrolytic high conductivity aluminium Four Pole (full rated)busbars rated at 433V,50 Hz., 400 amps, 35kA, insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints.
-
-
-
Outgoing: 160amps, 415V 4P MCCB '25kA' with overcurrent and short circuit Thermal based release.- 5 Nos.
1
178000
178000
Supplying, Installation, Testing and Commissioning of Outdoor typr LT Panel class IP54,Doble door with locking arrangement,dust, damp and vermin proof free floor standing factory built sheet steel enclosed modular construction extendable panel, suitable for operation on 415 + 10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with 2.0mm thick CRCA sheet,as per the norms,hinged doors of 2mm thick CRCA sheet, duly painted complete with aluminium bus bars, interconnection with solid copper conductor wires / aluminium strips, neutral links, earth bus etc. necessary metering protections & indications and mounted with the following as per drawing and technical specifications attached etc. complete as required.
-
-
-
Incoming: 630 Amp FP, 36 kA MCCB - 1No. rotary handle with spreader link ,overcurrent and short circuit thermal based released. 3 Nos. Phase indication LED lamps with 2 Amps back up MCB, breaker ' ON/OFF' indicating light with 2A MCB 1 No. Intelligent multi-function digital panel meters of class 0.5 accuracy with communication interface port R 485 for recording V (Between Phases and between each phase and neutral, A (In each phase and neutral), KWHr with suitable rating CTs, CT shorting links, R,Y, B LED indicating lamp and 2 A control SP MCB's.
-
-
-
Bus Bars: Electrolytic high conductivity aluminium Four Pole (full rated)busbars rated at 433V,50 Hz., 800 amps,600A 300A as required, 36kA, insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints.
-
-
-
Outgoing: 250amps, 415V 4P MCCB '36kA' rotary handle with overcurrent and short circuit Thermal based release.- 2 Nos.
-
-
-
400amps, 415V 4P MCCB '36kA' rotary handle with overcurrent and short circuit Thermal based release.- 1 Nos.
1
185000
185000
Supplying and laying of XLPE,Aluminium armoured cable of 1.1KV grade in ground including excavation,sand,brick protection,refilling the same or laying in existing pipes,existing cable tray,existing cable trench/wall,on floor with all haed ware and fixing arrangement etc. for surface laying as required.
-
-
-
3.5 Core 95 Sqmm XLPE Alu. armoured cable
100
61000
610
3.5 Core 240 Sqmm XLPE Alu. armoured cable& cable route marker
50
101500
2030
Supply and erection of pole/pad mounted 400KVA distribution substations,the work comprises of Supply, Erection and comissioning of following mentioned items,
a) 11 / 0.433 kV, 3-phase pole/pad mounted 400KVA distribution transformer with bimetallic terminal connectors with required size of cable for connection with DP, energy level-2,(copper wound) and with LV cable Box having detachable Aluminium Gland plate.
b) DP structures of 2nos 9mtr pole (ST-410 SP33) complete with all accessories with cement bottoming 1:2:4 mix as per REC standards as mentioned
c) Earthing, of DP structure/Transformers as required
d) Painting with red oxide and alluminium paint,
e) StaySet as per site requirements
f) Trivector meter with CT,
g) Sundry items,cable 1.1 kV Grade,PVC insulated stranded conductor FRLS type
h) Lightning Arrestor,GO,DOs.Sundry items(ACSR 50mm2 lugs,jumpers,binding tape),
i) Construction of cement concrete Bed of 400 kva substn. as per the requirement of site. Note - Above said item will operate as per the cost data 2020-21 and the item mentioned and any missing items shall operate/can be considered as per the schedule prescribed by the JPDCL for 400KVA substation.
1
1045931
1045931
Supply and Erection of 11KV line comprises 11mtrs ST pole (ST-410 SP56) with cement bottoming 1:2:4 mix as per REC Standards.
c) Earthing of each pole as per schedule JPDCL,
d) Painting with red oxide and alluminium paint of each pole
e)Stay Set as per site requirement,
f) Sundry items,
g) Pin insulator
h) V cross arms and relevant accessories
i) 50sqmm ACSR Conductor (1.200km) as required
j) Guard neting for road crossing as per site requirement Note - Above said item will operate as per the cost data 2020-21 and the item mentioned and any missing items shall operate as per the schedulled prescribed by the JPDCL.
0.4
300000
750000
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
RJ45 Computer Socket,Cat 6,1M
68
20060
295
Apprication 10% on DSR-2018 Electrical items rates
357063
357063
1
LIFT SYSTEM - PASSENGER LIFT Supplying, Installation, Testing & Commissioning of 8 Passenger Lift (Gearless),
MRL having contract speed of 1.0 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:-
Speed -- 1.0 MPS
Floors --G+3+ Machine room floor
Travel -- 16 Mtrs Approx.
Stops & opening - -- 5/900 mm WideX 2400mm High
Controller: A.C. variable voltage & variable frequency drive.
Automatic rescue device complete with dry maintenance free batteries as required.
Operation: Microprocessor based single automatic push button/duplex selective collective with /
without attendant.
Power-415 V, 3 phase, 50 Hz, 4 wires system
Type of doors
(i) Car Power operated, Two Speed Stainless Steel hail line finish. (SS 304 Grade)
(ii) Landing doors : Stainless Steel hail line finish. (SS 304 Grade)
Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides
adjacent to control panel in the lift car.
The Lift shall be provided with Brail button System.
Ceiling as per manufacturer's standards with Fan & LED Lights.
On each Landing outside the lift, a steel plate with illumination sign shall be provided with written
on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided.
Interlocking provision with Fire detection system shall be provided.
Voice announcement system in the car to announce the position of the elevator in the hoistway
as the car passes or stops at a floor served by the elevator.
2 Hour Fire rated door. Manufacturer shall be submit the certificate along with supply of material
from NABL approved Lab.
Lift described as above
1
1600000
1600000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements