Shri Mata Vaishno Devi University Tender

Providing and place of back unit .The Back Unit shall be of dimensions 1800 x 500 x 1800mm. It shall be made of 25mm thick Ply – one side pre-laminate ply confirming to IS-1328:1998 . The Slide door unit is made of 25 mm thick Pre-laminated ply with matching 2 mm thick PVC lipping. Shutters are made of 18mm thick Ply one side pre laminate ply. Shutters must have a soft closing mechanism. Handles are provided for ease of opening. Storage is provided with lock for security. The product should be certified with ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018. The product should be complete as per approved sample and as per the direction of Engineer-Incharge with reference to photograph.

Main Chair

Providing and placing of High Back Executive with Headrest. The Seat is made of 1.4cm thick hot pressed plywood upholstered with fabric and moulded Polyurethane foam. It has a seat depth adjustment of 5cm integrated in the seat through a sliding mechanism. Seat size shall be 50cm x 49cm. The back is injection moulded which is upholstered with Mesh fabric. The back consist of adjustable lumbar support made of injection moulded polypropylene . Back size shall be 50cm x 68cm. The Polyurethane foam for seat is of density 55 kg per meter cube. The three way adjustable armrests is made of glass filled polyamide arm structure with PU armtop and height adjustment of 7cm. The armtop has swivel and to and fro motion. It shall have center tilt synchro mechanism. The headrest is injection moulded in glass filled polypropylene which is upholstered with foam and fabric. The company should be certified with, ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018. The product should be complete as per approved sample and as per the direction of Engineer-Incharge with reference to photograph.

Visitor Chair

Providing and placing of Mid Back Chair. The Seat is made of 1.4cm thick hot pressed plywood upholstered with fabric and moulded Polyurethane foam. Seat size shall be 50cm x 49cm. Back size shall be 50cm x 68cm. The Polyurethane foam for seat is of density 55 kg per meter cube. The company should be certified with ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018. The product should be complete as per approved sample and as per the direction of Engineer-Incharge with reference to photograph.

Sofa 2 Seater

Providing and placing in position of 2 Seater Sofa of overall size 1460mm(L) x 920mm(D) x 820mm(H). Upperstructure shall be a single shell 1.2 ±0.1cm. thick hot pressed plywood. Dia 4mm zig-zag type assembly is mounted in the understructure for support and additional cushioning purpose. The seat is made up of PU foam with density 32+/-2 Kg/m3 having an additional top layer of PU foam with density 28+/-2 Kg/m3, upholstered with fabric or leatherette. The back is made up of 28+/-2 Kg/m3 with additional top layer of PU foam with density 23+/-2 Kg/m3, upholstered with fabric or leatherette. The leg is a welded assembly made up of stainless steel (grade SS 202) tube and plate. Overall Dimensions of Chair shall be Seat Height - 45.0 cm, Height - 82.0cm, Width & Depth of Chair as measured from pedestal - Width-205.5 cm and Depth-92.0 cm.The company should be certified with ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018. The product should be complete as per approved sample and as per the direction of Engineer-Incharge with reference to photograph.

Side Table

Providing and placing in position Corner Table. The top shall be made of glass which shall be 12+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm.The company should be certified with ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018. The product should be complete as per approved sample and as per the direction of Engineer-Incharge with reference to photograph.

Reception Area

Made of 25mm Thick ply confirming to IS-1328:1990, Edge banded with matching 2 mm thick PVC lipping. Made of 25mm Thick Pre-laminated ply grade and approved shade confirming to IS-1328:1990, Edge banded with matching 2 mm thick PVC lipping. Made of 18mm Thick Pre-laminated twin plyconfirming to IS- 1328:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer bottom is made of ply. Handle is provided for ease of opening. HDU and Drawer is provided with cam lock for security. Organizer Plate made of 1.2mm CRCA (IS-513) is provided for magnetic sticky notes. The product should be complete as per approved sample and as per the direction of Engineer-Incharge with reference to photograph.

Providing and placing in position Revolving Medium Back Chairs.The cushioned seat assembly shall be consisting of seat base moulded in glass-filled poly-amide, moulded polyurethane foam and upholstered with high stretch knitted polyster fabric. The cushioned back assembly shall be consisting of back inner moulded in Poly-propylene in-situ moulded with polyurethane and upholstered with high stretch knittedpolyster fabric. The back size shall be 45.5 cm x 53 cm H and the seat size shall be 48.5 cm W x 49.0 cm D. The hig hresiliance polyurethane foam used in the seat and back cushion shall be moulded in density 45+/- 2 kg/m³ and hardness load shall be 16+/- 2 kgf for 25% compression. The seat and back shall be firmly connected to the frame and shall be cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need of complex manual adjustments. The armrset assembly shall be made of housing sliding over the armrest struture.The armrest top shall be made of integral skin PU moulded over plastic inner moulded in glass filled polyamide. The company should be certified with ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 .The product should be complete as per approved sample and as per the direction of Engineer-Incharge with reference to photograph.

Glass Door Storewell shall have an overall Size of 916mm(W)x486mm(D)x1980mm(H) with weldeed constructiob. It should have shelf thickness of .07 mm,Back thickness of 0.8mm,Door thickness of 0.8 mm (high yield strength) and all other components shall have a thickness of 0.9 mm .These components shall be made of CRCA with epoxy powder coating of 50to 60microns.The product should be complete as per approved sample and as per the direction of Engineer-Incharge with reference to photograph.

Reading Tables

Providing and placing Linear Type Workstations 'Size - 1200 mm x 600 mm x 750/1200 mm (LxWxH) Legs are for standard workstation height of 750mm. Comprising of metal powder coated cross connectors between legs . 25 mm PLP (Prelam Ply) edgeband top at 750mm ht PROVISION FOR GLASS DIVIDER ONLY with Single Raceway for Wiring etc.The product should be complete as per approved sample and as per the direction of Engineer-Incharge with reference to photograph

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and upholstered with high stretch knitted polyester fabric. The back size shall be 44cm W x 46cm H. The HR polyurethane foam used in seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjusments. The adjustable armrests assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled Polyamide. The overall dimensions of the chair shall be 48.5x 58.9cm x93.5cm. The seat height shall be 47.5cm.The product should be complete as per approved sample and as per the direction of Engineer-Incharge with reference to photograph

Providing and placing in position Double Sided Lab-cum-Library Rack of Size L-940x D-600xH-2100 mm, made in 0.8mm thickness with Stiffener, Duly Powder Coated (5 compartments), closing sheet to be of 0.8 mm thickness, top & Sides covered with 18 mm Prelam Particle Board. Back is open, but every shelf has collar in centre.. The product should be complete as per approved sample and as per the direction of Engineer-Incharge with reference to photograph

Providing and placing in position Steel Book Case - 914x 305 x 1742 mm, made in 0.8mm thickness with Stiffener, Duly Powder Coated (4 compartments), 4 openable Door with scissor mechanism having floating glass in doors. Each door is independently lockable. The product should be complete as per approved sample and as per the direction of Engineer-Incharge with reference to photograph

Table for Computer Room / other staff

Providing and placing Linear Type Workstations 'Size - 1200 mm x 600 mm x 750/1200 mm (LxWxH) Includes : 45mm modular partition on facing sides & exposed ends only, pin-up board / marker on facing side & side partition only end of workstations. 25 mm PLPB (Prelam Particle Board) edgeband top at 750mm ht '18 mm PLPB edgeband Gables in between 2 seats PROVISION FOR GLASS DIVIDER ONLY with Single Raceway for Wiring etc.. The product should be complete as per approved sample and as per the direction of Engineer-Incharge with reference to photograph

Providing and placing in position Revolving Mid Back Chairs. The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon & upholstered using net fabric with high tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with density =55+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an integrated layer of thermoplastic elastomer. Armrest is made up of plastic injection moulded nylon with textured top. It shall have Front pivot synchro The lumber support consists of polypropylene pad with mouled polyurathene foam & covered with polyester fabric. The company should be certified with ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018. The product should be complete as per approved sample and as per the direction of Engineer-Incharge with reference to photograph