Shri Mata Vaishno Devi University Tender

Providing and placing in position of 2 Seater Sofa of overall size 1460mm(L) x 920mm(D) x 820mm(H). Upperstructure shall be a single shell 1.2 ±0.1cm. thick hot pressed plywood. Dia 4mm zig-zag type assembly is mounted in the understructure for support and additional cushioning purpose. The seat is made up of PU foam with density 32+/-2 Kg/m3 having an additional top layer of PU foam with density 28+/-2 Kg/m3, upholstered with fabric or leatherette. The back is made up of 28+/-2 Kg/m3 with additional top layer of PU foam with density 23+/-2 Kg/m3, upholstered with fabric or leatherette. The leg is a welded assembly made up of stainless steel (grade SS 304) tube and plate. Overall Dimensions of Chair shall be Seat Height - 45.0 cm, Height - 82.0cm, Width & Depth of Chair as measured from pedestal - Width-205.5 cm and Depth-92.0 cm. The sample shall be approved by the University Authority.

Centre Table of size of 1200mm x 600mm, legs of 35mm x70mm of sheesham wood and side rail of 35mm x 70mm with 8mm thick black glass top properly bevelled edged and grided, bottom shelves of 350x1040mm size with 18mm thick block board covered with teak ply and bottom rails of 20mmx60mm finished with melamine polish complete.

Study Table: Steel table of size 4’x2’x2’-6” with frame made of square section 25mm x25mm, 18 gauge with one drawer made of M.S Sheet 22 gauge duly decopainting and locking arrangement complete. Top made of 25 mm laminated ply (WBR) with 2 mm edge beading and top colour as per approved shade. The sample shall be approved by the University Authority.

Study Chair with armrest have the cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and upholstered with high stretch knitted polyester fabric. The back size shall be 44cm W x 46cm H. The HR polyurethane foam used in seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjusments. The adjustable armrests assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled Polyamide. The overall dimensions of the chair shall be 48.5x 58.9cm x93.5cm. The seat height shall be 47.5cm.The product should be complete as per approved sample and as per the direction of Engineer-Incharge.

Providing and placing in position of 3 Seater Sofa of overall size 2190mm(L) x 920mm(D) x 820mm(H). Upperstructure shall be a single shell 1.2 ±0.1cm. thick hot pressed plywood. Dia 4mm zig-zag type assembly is mounted in the understructure for support and additional cushioning purpose. The seat is made up of PU foam with density 32+/-2 Kg/m3 having an additional top layer of PU foam with density 28+/-2 Kg/m3, upholstered with fabric or leatherette. The back is made up of 28+/-2 Kg/m3 with additional top layer of PU foam with density 23+/-2 Kg/m3, upholstered with fabric or leatherette. The leg is a welded assembly made up of stainless steel (grade SS 304) tube and plate. Overall Dimensions of Chair shall be Seat Height - 45.0 cm, Height - 82.0cm, Width & Depth of Chair as measured from pedestal - Width-205.5 cm and Depth-92.0 cm

Providing and place of main table of overall size of table 2350mm(L) x 2350mm(D) x 750mm(H). The main table shall be of size 2350mm(L) x 1150mm(D) x 750mm(H). The side unit shall be 1200mm(L) x 600mm(D) x 750mm(H). The table is made of 25mm thick ply – one side pre-laminate ply confirming to IS-1328:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The top is made of 25mm thick ply one side pre-laminate and confirming to IS-1328 BWR:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick Ply one side pre-laminate confirming to IS-1328:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated plyof E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated Ply of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick ply one side pre-laminate with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400mm long metal Panel Drawer Slides. Drawer extension is 325mm. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. The product should be complete as per approved sample and as per the direction of Engineer-Incharge with reference to photograph.

Providing and placing of High Back Executive with Headrest. The Seat is made of 1.4cm thick hot pressed plywood upholstered with fabric and moulded Polyurethane foam. It has a seat depth adjustment of 5cm integrated in the seat through a sliding mechanism. Seat size shall be 50cm x 49cm. The back is injection moulded in Glass filled polyamide which is upholstered with Mesh fabric. The back consist of adjustable lumbar support made of injection moulded polypropylene having an adjustment of 6cm. Back size shall be 50cm x 68cm. The Polyurethane foam for seat is of density 55 kg per meter cube. The three way adjustable armrests is made of glass filled polyamide arm structure with PU armtop and height adjustment of 7cm. The armtop has swivel and to and fro motion. The inner tube of armrest is chrome plated. It shall have center tilt synchro mechanism, 360 degree revolving type, 3 position locking system with anti-shock feature. The headrest is injection moulded in glass filled polypropylene which is upholstered with foam and fabric. The pneumatic height adjustment is chrome plated with an adjustment stroke of 9cm. The pedestal is high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors. The pedestal is 65cm PCD. The overall dimension of the chair shall be 75cm x 75cm x (115-130cm). Seat height shall be 44.5cm to 53.5cm.This shall come with sliding seat, which helps user adjusting the seat depth as per the user size and needs.

Corner Table Wooden of size 900mm X 600mm: The table top should be constructed out of 35mm seasoned sheesham hardwood with center glass of 8mm thick with 75mm border of wood. The wood shold be fully treated and seasned solid wood. The wood should be treated and kiln dried. All the wood joints are joined with adhesive of D3 grade and the adhesive should be water resistant to BSEN204 Group D3 ensuring bond security under adverse conditions. The polish should be non-water based stain polish with PU finish for longer life and smooth finish. All the undersides or nonvisible timber surfaces finished in brown duco.

Mattress: Size 1800mm by 1875mm by 125mm. Mattress should have anti-microbial fabric. Mattress should come with at least 5 years warranty.

BOOK SHELF Dimensions: 600mmx600mm Open book shelf made with 19MM WBR ply with both side laminated with 1mm thick lamination . It will be in knock down form. One glass shelf of 8mm thick bevelled edge corner with supporting brackcet mid of the rack and wall hanging arrangement

Utensils Kitchen Rack fully stainless steel (SS 304 grade) wall mounted dish rack of size 39 inch X 36 inch with all utensils hanging accessories.(as per approved design)