Public Works Department Tender

Scarifying of metalled/ B.T surface including stacking of serviceable material and disposal of unserviceable material and consolidation of the patches/ stretches with 8-10 KN power road rollerand disposal of unserviceable material beyond SMC limits complete.

Supply, stacking and laying of WBM grade 3rd with specified graded stone aggregate 53mm – 22.04mm size broken quarry stone @0.92cum/10 sqm and using of screening 11.20mm size @ 0.135cum/10sqm and binding material @0.06cum/10sqm of road surface including sorting, spreading to template, watering and consolidation to required gradient and camber with (80-100) KN road roller all inclusive leads, lifts, loading, unloading, head load if any and carriage of materials from nearest approved source to site of work complete (To be laid as per guide line of MOST specification).

Providing, laying 2 cm thick compacted premix carpet surfacing laid over prepared & cleaned surface by way of brooming & brushing using 1.80 cum and 0.9 cum of stone chipping of 13.2 mm size and 11.2 mm size respectively per 100 sqm .of road surface and 52kgs and 56kgs of hot bitumen/cum of stone chippings of 13.2 mm and 11.2 mm size respectively including. P/applying of tack coat using hot straight run Bitumen of grade 80/100 including heating the bitumen spraying the bitumen on WBM surface@0.75 kgs/ sqm. incl. P/L, of 6mm thick seal coat of premixed fine aggregate (Passing 2.36 mm and retained on 180 Micron sieve) with bitumen using 128 kgs of bitumen grade 80/100 Bitumen per cum of fine aggregate and @0.68 cum fine aggregate per 100 sqm of road surface including. Rolling and finishing with PRR of 8 to 10 ton capacity, including cost and carriages of all materials involved, taxes, octroi, labor charges, heating costs, etc., including cost & carriage of bitumen complete. (manuall mix laid manually or machine mix laid manually).