Public Health Engineering Department Tender
... More
The PHED has issued a formal invitation for competitive bids for the Public Health Engineering Department project, for Construction/ Successful Testing N Commissioning Of Water Supply Scheme Narwah (details As Per Sbd) in Pulwama, Jammu & Kashmir, with an estimated contract value of Rs. 3,57,09,000. The bid opening date for this tender is 13-05-2025 and the last date for bid submission is 02-06-2025. Interested bidders for Public Health Engineering Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Public Health Engineering Department - PHED Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date13 May 2025
Closing Date2 Jun 2025
Tender Amount₹ 3,57,09,000
Technical
Technical
Additional Eligibility
Class Of Bidder
Bid Capacity
... View More
The formula for bid capacity is: Available bid capacity = A x M x N – B, where A = Maximum value of engineering works executed in any one year during the last five years, M = Multiplier factor fixed as 2.5, N = Number of years prescribed for completion of work in progress, B = Value of existing commitments and ongoing works to be completed in the next „N‟ years.
Technical Capacity
... View More
The bidder is required to have prior work experience of similar works completed, with the following experience criteria:
- Three similar completed or substantially completed works each of value not less than 40% of the estimated cost, with capacity equal to 80% or higher of the advertised cost.
- Two similar completed or substantially completed works each of value not less than 50% of the estimated cost, with capacity equal to 80% or higher of the advertised cost.
- One similar completed or substantially completed work of value not less than 80% of the estimated cost, with capacity equal to 80% or higher of the advertised cost.
The substantial completion is based on 80% (value wise) or more works completed under the contract. The experience certificate should have been issued by an officer of the rank not below an Executive Engineer. The bidder should submit details of works completed or substantially completed during the last seven years, with values and percentages of similar works completed to be provided.
Costs
EMD
₹ 10,71,270Document Cost
₹ 4,000Tender Fee
Refer Documents
Summary
Construction/ Successful Testing N Commissioning Of Water Supply Scheme Narwah (details As Per Sbd)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PHE_277035_1Tender No
ENIT S. No. 06/PHEP of 2025-26Tender Authority
Public Health Engineering Department ViewPurchaser Address
-Website
http://http://jkphedwaterbilling.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including
disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by
Engineer-in-Charge. All kinds of soil
1060.14
188
200101.42500000002
... More
Extra for every additional lift of 1.50 m or part thereof
403.08
81
32911.482
... More
Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work)
-
-
-
... More
100-mm dia. nominal bore
118
1135
133971.3
... More
80 mm dia. nominal bore
104
773
80407.59999999999
... More
65 mm dia. nominal bore
700
628
439915.00000000006
... More
50 mm dia. nominal bore
550
477
262625
... More
40 mm dia. nominal bore
900
386
347445
... More
25 mm dia. nominal bore
2050
249
510450
... More
20 mm dia. nominal bore
2050
182
374432.5
... More
15 mm dia. nominal bore
2000
144
288800
... More
Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes
conforming to IS : 8329
-
-
-
... More
300 mm dia Ductile Iron Class K - 7 Pipes
12
3129
37550.399999999994
... More
250 mm dia Ductile Iron Class K - 7 Pipes
12
2504
30057.600000000002
... More
200 mm dia Ductile Iron Class K - 7 Pipes
12
1947
23364
... More
150 mm dia Ductile Iron Class K - 7 Pipes
312
1581
493350
... More
100 mm dia Ductile Iron Class K - 7 Pipes
1012
1108
1121447.8
... More
80 mm dia Ductile Iron Class K - 7 Pipes
750
1040
780000
... More
Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket.
-
-
-
... More
150 mm dia pipes
48
144
6945.599999999999
... More
100 mm dia pipes
308
89
27627.600000000002
... More
80 mm dia pipes
230
78
18089.5
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete:
-
-
-
... More
25-40mm dia
50
666
33312.5
... More
Above 40mm dia
30
1268
38062.5
... More
Cutting road and making good the same including supply of extra quantities of material i.e. crushed aggregate, moorum screening, red bajri and labour required.
-
-
-
... More
Bituminous portion
3.6
3365
12116.16
... More
Water bound macadam.
6.75
1968
13285.6875
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
1660.16
198
329873.792
... More
Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge.
355.98
59
21341.001000000004
... More
Providing and laying of stone solling 50 mm thick hand packed including watering dressing and ramming ,filling , spreading , including all carriages leads and lifts
306.49
1320
404566.8
... More
Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.
11.73
787
9236.202
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
89.12
4861
433287.18080000003
... More
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
168.33
7800
1313101.9308000002
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All works above plinth level upto floor V level
259.18
9302
2411146.3564
... More
Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over the specified cement content used is payable/ recoverable separately ,Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum)
259.18
111
28994.466600000003
... More
Add or deduct for using more or less cement in the items of design mix over and above the specified cement content therein.
366.18
1074
393412.80659999995
... More
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
6.67
6978
46547.7289
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
46.69
6465
301859.72109999997
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 mix (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size )
147.18
5437
800326.5732
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
17.31
7269
125829.5058
... More
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
130.31
9408
1225973.4202999999
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
97.95
9849
964742.853
... More
Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate androofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
19.61
10404
204032.4411
... More
Providing & laying damp-proof Course 50mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete
17.68
372
6591.988
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20mm nominal size stone aggregate
29.47
461
13610.7195
... More
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4coarse sand)
57.86
7476
432583.3468
... More
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
57.86
1522
88073.9134
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Kiln seasoned and chemically treated hollock wood
1.9
71285
135441.5
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).35mm thick-Kiln seasoned & chemically treated hollock wood
42.81
2373
101624.5185
... More
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge -35mm thick: Kiln seasoned and chemically treated hollock wood
36.01
2939
105867.59949999998
... More
Float glass panes: 4 mm thick glass pane (weighing not less than 10 kg/sqm)
19.1
1768
33769.755000000005
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc.
650
179
116935
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level:Thermo-Mechanically Treated bars of grade Fe-500D or more.
72595.9
87
6328184.602999999
... More
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Foundations, footings, bases of columns etc. for mass concrete.
949.57
262
249072.211
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
1747.47
573
1002785.6595000001
... More
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
524.49
502
263739.7965
... More
Columns, pillars, piers, abutments, posts and struts.
516.59
680
351358.6885
... More
Suspended floors, roofs, landings, balconies and access platforms.
394.46
635
250718.77599999998
... More
Edges of slabs and breaks in floors and walls
514.76
242
124726.348
... More
Staircase
29.52
619
18296.496
... More
Stairs (excluding landings) except spiral staircases.
40.32
807
32558.4
... More
Domes. Arches
193.24
2086
403253.2320000001
... More
Extra for Domes. Arches
193.24
1008
194872.87800000003
... More
Extra for shuttering in circular work (20% of respective centering and Shuttering items)
-
-
-
... More
Foundations, footings, bases of columns etc. for mass concrete.
77.44
52
4062.5024
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
568.56
114
65253.63119999999
... More
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
155.91
100
15679.868699999999
... More
Suspended floors, roofs, landings, balconies and access platforms.
20.78
127
2641.5536
... More
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and de-centering at all levels, over a height of 3.5 m, for every additional height of 1 meter or part thereof (Plan area to be measured):Suspended floors, roofs, landings, beams and balconies (plan area to be measured)
551.11
267
147477.03600000002
... More
Extra for R.C.C./B.M.C./R.M.C. work above floor V level for each four floors or part thereof.
98.61
309
30474.927450000003
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm
366
733
268461
... More
Applying :12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)
1218.72
260
316928.136
... More
Applying 12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand)
3006.23
325
978377.5534999999
... More
Applying :12mm Cement plaster of mix: 1 : 3 ( 1 cement : 4 fine sand) with floating coat of neat cement
286.41
343
98453.43750000001
... More
Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.
1736.09
155
270048.7995
... More
Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)
1731.91
57
100277.589
... More
P/F of 150mm dia flanged tail pieces incl all carrages.
2
2000
4000
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
12.65
1335
16890.280000000002
... More
Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade
complete.
61.44
1210
74382.9504
... More
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Welded
7681.63
102
784601.6882
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
3768.81
91
343037.08619999996
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. chequered plate wherever required, all complete.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
3580.43
146
524998.4508999999
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.M.S. tube
1200
172
207480
... More
Providing and fixing D.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). Confirming to IS:14846 read with latest amendments.
-
-
-
... More
300 mm dia. Class 1
1
62066
62066
... More
250 mm dia. Class 1
3
50356
151068
... More
200 mm dia. Class 1
3
31698
95094
... More
150 mm dia. Class 1
13
20243
263159
... More
100 mm dia. Class 1
14
13164
184296
... More
80 mm dia. Class 1
12
10815
129780
... More
Providing corrugated G.S sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks , bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I filled with white lead , including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horiziontal / vertical or curved surface ) excluding the cost of purlins , rafters and trusses and including cutting to size and shape wherever required: 0.50mm thick with zinc coating not less than 275gram/sqm
229.53
830
190567.2825
... More
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete .with 0.50 mm thick with zinc coating not less than 275 gram/m2
68.25
626
42772.275
... More
Providing and fixing plained coloured eaves boarding of GS sheets 300 mm wide of standard quality incl all fixtures,nuts,JL hooks ,bolts ,washers and all sorts of carriages involved complete.
71.66
250
17915
... More
P/F of 0.5mm coloured G.S sheet soffit boarding incl. backing, supporrts incl all fixtures,nuts,JL hooks ,bolts ,washers and all sorts of carriages involved complete.
18
480
8640
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2mm thick
925.01
172
159471.72400000002
... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.: With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter
133.17
59
7923.614999999999
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
802.62
149
119630.51100000001
... More
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
1909.32
91
175275.576
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
614.41
121
74927.2995
... More
Applying priming coat:With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works
417
52
21996.75
... More
Painting with aluminum paint of approved brand and manufacture to give an even shade. Two or more coats on new work
51
119
6089.400000000001
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared
and applied as per manufacturer’s specifications including appropriate
priming coat, preparation of surface, etc complete.On steel work
250
188
47200
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters.80x1.20 mm M.S. laths with 1.20 mm thick top cover
11.68
2781
32482.664
... More
Providing and fixing ball bearing for rolling shutters.
4
483
1932.4
... More
Supply and filling of filter media from approved source - Gravel (Graded gravel - size ranging from 2.0mm to 40.00 mm) in filter beds. Including all carriages, complete job
6.26
1072
6711.7842
... More
Supply and filling of filter media from approved source - Sand (Coarse filter sand - in filter beds. Including all carriages, complete job
6.26
7700
48202
... More
Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including skirting in vertical, rubbing, polishing and curing complete with:Makrana White Second quality (16mm)
89.43
6175
552265.1277000001
... More
Extra for pre finished nosing to treads of steps of marble stone
13
579
7531.029999999999
... More
Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 meter.
13
674
8763.69
... More
Providing and Fixing 25 mm x 5 mm Copper Strip in 40 mm dia. G.I Pipe FRL Earth Electrode including connection with Brass nut ,bolt,spring,washer,excavation and refilling etc. as required.
40
1224
48960
... More
Supply, installation, testing and commissioning of lightening conductor made of 25 mm dia 300 mm long copper tube having single prong at top with base plate.
1
1500
1500
... More
Providing & fixing of MS fittings viz bends of suitable degree, tees, collars etc to be fabricated from 6mm Nominal Size MS plate as per the requirement of site including cost of welding. The work should be leakproof and should be painted with anti corrosive red oxide primer. Complete Job.
225
147
33259.5
... More
Providing & fixing of PVC under drainage laterals with specifications conforming to IS-4985 & IS-15801, 8mm thick fabricated out of approved make with nominal dia of 9mm perforations as per design of bed provided at 60 degrees along with PVC Tees and end caps grouted in concrete, the pressure rating of 10kg/sq cm:75 mm dia
200
1420
284000
... More
Supplying and fixing of 25mm dia. medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
560
103
57960
... More
Providing and carrying out wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (excl. cost of conduit)
76
824
62665.799999999996
... More
Providing and carrying out wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2-way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (excl cost of conduit)
64
1215
77795.2
... More
Providing and carrying out wiring for heating points with 4.0 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, modular combined S&S 16Amp along with modular plate, suitable GI box and earthing the point with 2 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (excl cost of conduit)
54
1300
70200
... More
Supply of 24-Watt LED slim aluminum panel surface type complete in all respects.
3
600
1800
... More
Supplying and fixing 12-way double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
4
2360
9443.8
... More
Providing and laying of armoured cable 95mm, 3.5 core for main service line of reputed make in P.V.C pipes of required dia to accommodate the service line including bends etc., from main transformer to the main panel board including copper thimbles, earth work excavation and filling for laying of cable complete.
360
325
117000
... More
Providing and fixing of MCCB of approved brand and manufacture including wiring of required dia. (Qtr)
-
-
-
... More
40 Amp
2
2100
4200
... More
32 Amp
2
1700
3400
... More
10 Amp
4
1300
5200
... More
Providing, fitting and testing of LED flood light IP65 30W rating to pre-wired electric points on the outside of the Filter House building.
3
1500
4500
... More
Providing and fitting at site 3-phase, Voltage stabilizer of following ratings, oil emersed, of standard make and quality including accessories as required. The job includes making of connections with main panel board and service line. To be paid in fitted and finished form after testing on full load capacity, complete job. 25 KVA
1
42000
42000
... More
Providing and fitting of panel board with angle iron supports and A.C. sheets for fixing of MCCB, change over switch, bus bars etc. The job includes nuts bolts and embedding of supports in cement concrete blocks complete job.(Filter House)
2
4250
8500
... More
Providing and fitting of:
-
-
-
... More
100 Amp 4 pole change over of reputed make.
7
7598
53186
... More
100 Amp-Copper bus bar
6
4550
27300
... More
32 Amp-Copper bus bar
6
2850
17100
... More
100 Amp MCCB
6
3300
19800
... More
40 Amp MCCB
8
2100
16800
... More
3-phase indicator points
5
445
2225
... More
3-phase voltmeter and Amperemeters
8
1190
9520
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
3
569
1707.75
... More
Supply and fixing of two module stepped type Electronic Fan regulator on the existing modular plate switch box including connections but excl cost modular plate etc., as required.
3
393
1179.9
... More
Providing and fixing led bulbs of 10 watt of approved make.
15
200
3000
... More
Providing, fixing and installation of electric ceiling fan of approved brand and manufacturer with all carriage complete
3
2500
7500
... More
Providing, fixing and installation of exhaust fan of approved brand and manufacturer with all carriage complete
5
1500
7500
... More
Poviding & fixing water closet squating pan (Indian type W.C along with 100 mm sand caste iron ParS trap 10 ltr low leave W.C flushing cistern of app make with manually controlled device with fittings :-Long Pan pattern white vitreous china W.C in 580mm
1
2979
2979.4
... More
Providing and fixing kitchen sink with C.l brackets C.P brass rubber plug White glazzed fire clay kitchen sink 600x450x250 mm incl. Cost of all fittings complete job.
1
3000
3000
... More
Providing and fixing 100mm PVC Waste pipes of approved make (B-Class) including plain bends, door tee and collars
10
460
4600
... More
Providing and fixing 75mm PVC Waste pipes of approved make (B-Class) including plain bends, door tee and collars
10
420
4200
... More
Providing and of fixing reducer,collar and floor traps of standard make with all fittings @ 2 each.complete job.
1
1500
1500
... More
Providing and fixing 32mm PVC Waste pipes and tubes of standard make size
2
300
600
... More
Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
2
436
873
... More
Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms
2
636
1272.6
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:15 mm dia. nominal bore.(Light)
50
278
13944.999999999998
... More
Providing and fixing 35 liter geyser of approved make and manufacturer Excl. angle valves but incl. cost of ,CP connections,all other fittings and fixtures. complete .
1
10000
10000
... More
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
2
536
1072.2
... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.
8
62
498.4
... More
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
... More
125mm
11
66
729.8499999999999
... More
100mm
74
52
3870.2
... More
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
... More
125x10mm
7
80
562.4499999999999
... More
100x10mm
76
57
4358.6
... More
Providing and fixing ISI marked oxidized M.S. door latches conforming to IS :
5930 with screws etc. complete :
-
-
-
... More
300x20x6 mm
4
88
354.4
... More
Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges with
Stainless Steel screws etc. complete.
-
-
-
... More
100x58x1.90 mm
12
64
779.4000000000001
... More
75x47x1.80 mm
24
48
1160.4
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
500
11
5625
... More
Provision for Construction of ring type (four compartment) septic tank/soakage pit of depth 10 feet each iincluding cost of earthwork excavation, cost of rings, iron cover, PVC nce type B-pipe, P traps and connecting of septic tank with soakage pits including all accessories whichever is required for completion of work with CI lids. complete
12
1500
18000
... More
Earth work in surface excavation by manual means over areas exceeding 30 cms & upto 5 m in depth 1.5m in width as well as 10 sqm.
1125
83
93881.25
... More
Supply and filling of RBM/Quarry material of specified and required size as directed including dressing, ramming, watering and compacting with power roller to required gradient and camber with carriage of all material involved loading, unloading and stacking complete
59.06
850
50201
... More
Supply and stacking of graded stone aggregates
-
-
-
... More
63 mm to 45mm WBM 2
111.38
564
62885.148
... More
53mm to 22.40 mm WBM 3rd
111.38
575
64076.91399999999
... More
Supply and stacking of stone screenings/chipping of size range including carriage
-
-
-
... More
13.2 mm nominal size
15.19
504
7661.835999999999
... More
11.2 mm nominal size
21.94
504
11064.342
... More
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening /binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.
168.74
710
119948.82900000001
... More
Supply and stacking of crusher dust (as binding material incl. all carriage complete
13.5
377
5096.25
... More
Providing and fixing of 0.63mm thick PGI sheets at construction joints including all leads and lifts complete job as directed by Engineer-in-charge.
162.38
800
129904
... More
Providing, fitting, testing and commissioning of following items for Flash Mixer:
-
-
-
... More
Mixing device with reduction gear system:
1
2500
2500
... More
3-phase Electrically driven motor:
-
-
-
... More
1.0 HP
2
4800
9600
... More
Foundation \ Base plate
1
4548
4548
... More
Starter along with necessary wiring upto motor
1
1680
1680
... More
Providing, fitting, testing and commissioning of following itemn for Alum Dosing Unit-
-
-
-
... More
Mixing device with reduction gear system.
1
2500
2500
... More
3-phase electrically driven motors:
-
-
-
... More
1.0 HP
2
4800
9600
... More
Foundation / Base plate
1
4548
4548
... More
Starter along with necessary wiring upto motor
1
1680
1680
... More
P.V.C outlet, overflow system with fittings upto point of application
1
530
530
... More
150mm dia drain outlet
1
1350
1350
... More
50 mm dia Service water piping.
1
530
530
... More
Constant dozing unit with time device
1
1500
1500
... More
Manually operated hoist
1
10000
10000
... More
Providing, fitting, testing and commissioning of following itemns for Chlorine Dosing Unit-
-
-
-
... More
Mixing device with reduction gear system.
1
2500
2500
... More
3-phase electrically driven motors:
-
-
-
... More
1.0 HP
2
4800
9600
... More
Foundation / Base plate.
1
4548
4548
... More
P.V.C outlet, overflow system with fittings upto point of application.
1
530
530
... More
150mm dia drain outlet
1
1350
1350
... More
Starter along with necessary wiring upto motor
1
1680
1680
... More
50mm dia service water piping
1
530
530
... More
Constant dozing unit with time device.
1
1500
1500
... More
Providing and laying D.I. standard specials such as tees, bends, collars, tapers, caps etc. suitable for flanged jointing as per IS: 9523 (as per site requirement) upto 300 mm Dia
10
8539
85392
... More
Providing/ Fixing, installation, successful commissioning of double flanged MS pipes/specials to be fabricated from MS tube heavy quality nominal thickness 6mm, conforming to relevant Indian Standard IS-1239 and/or IS 1161 read with up to date amendments. The pipe material should be of standard quality and must withstand all the anticipated design pressure ratings.The work should be leakproof and should be painted with anti corrosive red oxide primer. Complete Job.
2500
147
367500
... More
Providing fitting, testing and comissioning of air blower standard make ISI mark capable of providing compression @ 0.35 kgs/sqcm coupled with suitable 3 phase induction electric motor complete with auxiliary pipe system upto filter beds with pressure guage, Nozzles, foundation block, base plate, air check valve , non- return valve, Starter etc:4.2 KLPM Air blower with 5.0 HP Motor.
1
87500
87500
... More
Backwash Tank:- Supply installation and successful testing and commissioning of mono block pumping unit standard make ISI mark coupled with 2 phase induction motor with appropriate pumping capacity so as to fill the tank within the max. of 2 hours with nominal dynamic head of 25m along with all accessories like foot valves, non- return valves, foundation block, base plate, suction pipe, suitable rising main with nominal dia 50mm (class-B) with heavey duty valves and other accessories required for the job.
1
20268
20268
... More
P/F testing and commissioning of MS rotating desludging Bridge compraising of folliwing items
-
-
-
... More
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete for the Installation Testing and Commissioning of Half Bridge with Central Drive mechanism, scrapper and churners for required dia Clarifer.
3500
138
483699.99999999994
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete:On steel work
150
197
29670
... More
Central axle turn table with double bearing and guide for incoming cable.
2
4800
9600
... More
Peripheral drive assembly with following motors, gear box, rollers, drive trolly (60:1 reduction gear box).
-
-
-
... More
Pumping unit with 5.00 HP Motor.
1
24268
24268
... More
Starter along with necessary wiring upto motor
1
1680
1680
... More
Flocculator drive assembly with crown wheel, pinion sets, reduction gear (40:1) with motors complete job.
-
-
-
... More
1.0 HP
1
7300
7300
... More
Incoming cable, telescopic electric pole with rotary current collector
1
6500
6500
... More
Providing and fixing of MS flanged joints (12mm thick) to double flanged GI/DI pipes including cutting of pipes, welding charges, cutting of flanges, rubber gasket, bolts, nuts including testing of joint and all sorts of carriages. Complete Job
-
-
-
... More
80mm dia pipe
32
1100
35200
... More
100mm dia
16
1520
24320
... More
150 mm dia
6
2150
12900
... More
200 mm dia
4
3480
13920
... More
300 mm dia
3
7710
23130
... More
Providing and fixing of desludge motor of approved make and manufactures 5HP including installation and commessioning with all carraige complete
1
70000
70000
... More
Carriage of material from source upto site of work by mechanical transport including loading,unloading & stacking at site complete.
-
-
-
... More
Cement and steel for an avg. lead of 10 km
480.75
249
120019.2375
... More
Sand and 20mm stone aggregate for an avg lead of 10 km
1264.22
280
355056.18700000003
... More
Bricks for an avg. lead of 16 km
28139
-
25887.88
... More
40mm stone aggregate for an avg lead of 15 km
341.59
371
126825.53519999998
... More
Stone Screeing for an avg lead of 15 km
37.13
344
12790.913700000001
... More
Moorum for an avg lead of 15 km
15.19
344
5232.8031
... More
Disposal of earth for average lead of 1 km
230.09
170
39276.363
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements