Public Health Engineering Department Tender
... More
The PHED has issued a formal invitation for competitive bids for the Public Health Engineering Department project, for Construction/ Successful Testing N Commissioning Of Water Supply Scheme Khandaypora Nowgam (under Ut Capex)(details As Per Sbd) in Pulwama, Jammu & Kashmir, with an estimated contract value of Rs. 1,65,50,000. The bid opening date for this tender is 13-05-2025 and the last date for bid submission is 02-06-2025. Interested bidders for Public Health Engineering Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Public Health Engineering Department - PHED Tender
Civil And Construction
Electrical and Electronics
Water Storage And Supply
Electrical Works
Eprocure
Opening Date13 May 2025
Closing Date2 Jun 2025
Tender Amount₹ 1,65,50,000
Costs
EMD
₹ 4,96,500Document Cost
₹ 3,000Tender Fee
Refer Documents
Summary
Construction/ Successful Testing N Commissioning Of Water Supply Scheme Khandaypora Nowgam (under Ut Capex)(details As Per Sbd)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PHE_277035_3Tender No
ENIT S. No. 06/PHEP of 2025-26Tender Authority
Public Health Engineering Department ViewPurchaser Address
-Website
http://http://jkphedwaterbilling.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
65 mm dia. nominal bore
750
628
471337.50000000006
... More
50 mm dia. nominal bore
1000
477
477500
... More
40 mm dia. nominal bore
1500
386
579075
... More
25 mm dia. nominal bore
3000
249
747000
... More
20 mm dia. nominal bore
3500
182
639275
... More
15 mm dia. nominal bore
2000
144
288800
... More
Providing and fixing MS flanges 12mm thick to 80 mm dia G.I pipes including cost of pipes with G.I. fittings excluding trenching and refilling etc, incl. cutting threaded portion of pipes,Nuts bolts,washers,welding, Laying,jointening, successful testing and commissioning of the pipe line. complete job.
500
956
478240
... More
Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes
conforming to IS : 8329
-
-
-
... More
100 mm dia Ductile Iron Class K - 7 Pipes
1300
1108
1440595.0000000002
... More
80 mm dia Ductile Iron Class K - 7 Pipes
1300
1040
1352000
... More
Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket.
-
-
-
... More
100 mm dia pipes
217
89
19464.9
... More
80 mm dia pipes
183
78
14392.95
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete:
-
-
-
... More
25-40mm dia
50
666
33312.5
... More
Above 40mm dia
30
1268
38062.5
... More
Cutting road and making good the same including supply of extra quantities of material i.e. crushed aggregate, moorum screening, red bajri and labour required.
-
-
-
... More
Bituminous portion
7.2
3365
24232.32
... More
Water bound macadam.
12.15
1968
23914.2375
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
1929.93
198
383477.091
... More
Providing and laying of stone solling 50 mm thick hand packed including watering dressing and ramming ,filling , spreading , including all carriages leads and lifts
64.03
1320
84519.6
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
22.33
4861
108564.8872
... More
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
5.7
7800
44464.332
... More
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
6.96
6978
48571.5432
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
27.45
6465
177469.4655
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 mix (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size )
95.25
5437
517944.735
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.
58.77
8296
487593.5328
... More
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
6.23
9408
58612.6499
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
14.47
9849
142519.9498
... More
Providing & laying damp-proof Course 40mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete
19.32
310
5999.826
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate
44.82
505
22634.1
... More
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4coarse sand)
25.13
7476
187881.4294
... More
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
25.13
1522
38252.6347
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Kiln seasoned and chemically treated hollock wood
0.57
71285
40632.45
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).35mm thick-Kiln seasoned & chemically treated hollock wood
8.89
2373
21103.5265
... More
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge -35mm thick: Kiln seasoned and chemically treated hollock wood
8.89
2939
26136.1555
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc.
325
179
58467.5
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level:Thermo-Mechanically Treated bars of grade Fe-500D or more.
3323.5
87
289709.495
... More
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Foundations, footings, bases of columns etc. for mass concrete.
366.51
262
96135.573
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
205.5
573
117926.175
... More
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
28.63
502
14396.5955
... More
Columns, pillars, piers, abutments, posts and struts.
21.6
680
14691.24
... More
Suspended floors, roofs, landings, balconies and access platforms.
82.06
635
52157.336
... More
Edges of slabs and breaks in floors and walls
46.74
242
11325.102
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm
183
733
134230.5
... More
Applying :12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)
736.7
260
191578.83500000002
... More
P/F of 100mm dia flanged tail pieces incl all carrages.
1
2500
2500
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
15.64
1335
20882.528000000002
... More
Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade
complete.
7.03
1210
8510.9398
... More
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Welded
4144.32
102
423300.84479999996
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
2324.5
91
211575.99
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. chequered plate wherever required, all complete.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
400
146
58652
... More
Providing and fixing D.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). Confirming to IS:14846 read with latest amendments.
-
-
-
... More
100 mm dia. Class 1
2
13164
26328
... More
80 mm dia. Class 1
1
10815
10815
... More
Providing corrugated G.S sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks , bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I filled with white lead , including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horiziontal / vertical or curved surface ) excluding the cost of purlins , rafters and trusses and including cutting to size and shape wherever required: 0.50mm thick with zinc coating not less than 275gram/sqm
113.48
830
94216.77
... More
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete .with 0.50 mm thick with zinc coating not less than 275 gram/m2
31.46
626
19715.982000000004
... More
Providing and fixing plained coloured eaves boarding of GS sheets 300 mm wide of standard quality incl all fixtures,nuts,JL hooks ,bolts ,washers and all sorts of carriages involved complete.
24.34
250
6085
... More
P/F of 0.5mm coloured G.S sheet soffit boarding incl. backing, supporrts incl all fixtures,nuts,JL hooks ,bolts ,washers and all sorts of carriages involved complete.
18
480
8640
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2mm thick
282.68
172
48734.032
... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.: With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter
60.25
59
3584.875
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
165.07
149
24603.6835
... More
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
125.55
91
11525.49
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
151.75
121
18505.912500000002
... More
Applying priming coat:With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works
142.5
52
7516.875
... More
Painting with aluminum paint of approved brand and manufacture to give an even shade. Two or more coats on new work
51
119
6089.400000000001
... More
Providing fixing supplying P.C.C rings for making soakage pit including earthwork excavation ,dewatering and disposal of surplus excavated material outside the premises including providing and laying cement concrete in 1:2:4 mix over soakage pit . construction of man hole chambers with angle iron frame and covering arrangements, whichever is required at site or as per directions of Engineer- in- charge . (to be paid as per actual details /measurements )
12
1500
18000
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters.80x1.20 mm M.S. laths with 1.20 mm thick top cover
6.16
2781
17131.268
... More
Providing and fixing ball bearing for rolling shutters.
2
483
966.2
... More
Providing & fixing items like: hinges of different sizes ,tower bolts,handles ,locking,haldarazs,latches arrangement, nails, screws as per requirement and as per directions of site-incharge incl. all sorts of carriages. Complete job
1
8000
8000
... More
Supplying and fixing of 25mm dia. medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
100
103
10350
... More
Providing and carrying out wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (excl. cost of conduit)
12
824
9894.599999999999
... More
Providing and carrying out wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2-way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (excl cost of conduit)
10
1215
12155.5
... More
Providing and carrying out wiring for heating points with 4.0 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, modular combined S&S 16Amp along with modular plate, suitable GI box and earthing the point with 2 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (excl cost of conduit)
12
1300
15600
... More
Supplying and fixing 12-way double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
2
2360
4721.9
... More
Providing and laying of armoured cable 95mm, 3.5 core for main service line of reputed make in P.V.C pipes of required dia to accommodate the service line including bends etc., from main transformer to the main panel board including copper thimbles, earth work excavation and filling for laying of cable complete.
30
325
9750
... More
Providing and fixing of MCCB of approved brand and manufacture including wiring of required dia.
-
-
-
... More
40 Amp
2
2100
4200
... More
32 Amp
2
1700
3400
... More
10 Amp
4
1300
5200
... More
Providing and fixing led bulbs of 10 watt of approved make.
9
200
1800
... More
Poviding & fixing water closet squating pan (Indian type W.C along with 100 mm sand caste iron ParS trap 10 ltr low leave W.C flushing cistern of app make with manually controlled device with fittings :-Long Pan pattern white vitreous china W.C in 580mm
1
2979
2979.4
... More
Providing and fixing kitchen sink with C.l brackets C.P brass rubber plug White glazzed fire clay kitchen sink 600x450x250 mm incl. Cost of all fittings complete job.
1
3000
3000
... More
Providing and fixing 100mm PVC Waste pipes of approved make (B-Class) including plain bends, door tee and collars
10
460
4600
... More
Providing and fixing 75mm PVC Waste pipes of approved make (B-Class) including plain bends, door tee and collars
10
420
4200
... More
Providing and of fixing reducer,collar and floor traps of standard make with all fittings @ 2 each.complete job.
1
1500
1500
... More
Providing and fixing 32mm PVC Waste pipes and tubes of standard make size
2
300
600
... More
Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
2
436
873
... More
Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms
4
636
2545.2
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:15 mm dia. nominal bore.(Light)
50
278
13944.999999999998
... More
Providing and fixing 35 liter geyser of approved make and manufacturer Excl. angle valves but incl. cost of ,CP connections,all other fittings and fixtures. complete .
1
10000
10000
... More
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
2
536
1072.2
... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.
8
62
498.4
... More
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
... More
150x10mm
4
80
321.4
... More
100x10mm
24
57
1376.4
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
500
11
5625
... More
Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment)
180
258
46485
... More
Spreading of sludge, dump manure or/and good earth in required
thickness as per directions of officer in-charge (cost of sludge, dump manure or/and good earth to be paid separately)
180
48
8766
... More
Carriage of material from source upto site of work by mechanical transport including loading,unloading & stacking at site complete.
-
-
-
... More
Cement and steel for an avg. lead of 15 km
87.08
303
26441.841999999997
... More
Sand and 20mm stone aggregate for an avg lead of 15 km
378.92
341
129427.7044
... More
Bricks for an avg. lead of 26 km
11937
1
14682.51
... More
Good earth for an avg lead of 05 km
180
257
46411.2
... More
Electro-mechanical Items:- Supply, Installation, Testing & Commissioning of Submersible Pumping Unit as per IS 8034 with following specification are as under: PUMP::Discharge:= 4000-6000 GPH , Head Range =90-110 mtr Efficiency = Not less than 50% Speed = 2800-2900 RPM
Type of pump = Mixed flow. Type of fluid to be handled = Clear Water MATERIAL OF CONSTRUCTION:
Impeller = Stainless Steel/Chrome Steel
Pump Shaft = Stainless Steel SS 410. Pump Casing = Cast Iron/Stainless steel IMPELLER:
Impeller is of the enclosed or semi – enclosed type and properly balanced. Enclosed Impellers equipped with seal rings on their hubs.
COUPLING:
A suitable coupling arrangement provided with pump set. Non Return Valve: -
Non Return Valve of the suitable size provided above the pump discharge case. MOTOR:- Motor rating:Suitable for above parameters / 12.5 HP Method of starting = Star – Delta, Speed = 2900 RPM (Sync).
Frequency = 50 ± 3 % Hz
Working Voltage = 380-415 ± 15% V, 03 phase, Efficiency = Not less than 90%
Class of insulation = F/Suitable for above parameters
Submersible motor should be water filled water lubricated squirrel cage type having capacity for above pumping parameters and working on 3 phase; AC supply ranging from 380 to 415 volts, 50Hz. The motor should be sealed by radial rings to avoid mixing of well water with motor filled water.a) The job includes providing and fitting of interlocking arrangement against any failure of coupling. It must be fabricated out of MS strips of suitable size and length.b) The job includes providing and fitting of appropriate size MS nipple 2 feet long threaded on one end and welded to same size MS flange of thickness (IS: 6392, Table-5 and PN 0.60 ) at other end for column pipe as per site requirement. The threaded portion should be as per size of pumping out let for proper fixing.The job includes providing and fitting of R. I. cloth joints/rubber washers withnuts, bolts and washers for all joints of column pipe. The job also includes lowering of pumping unit in the well then proper testing and commissioning of pumping unit on full load at site.
Note: Providing of test certificate , performance chart and Characteristic Curve of pumping equipment is compulsory and pumping unit is to be approved from the concerned Sub Divisional office before procuring.Prefered makes:- Kirloskar, KSB, WILO,M&P
2
96921
193842
... More
Fabrication, providing, fitting and lowering B Class column pipe conforming to IS: 1239 of length 10 Rft into the production well upto the desired depth ; The job includes Providing and welding of flanges conforming to IS: 6392, Table-5 and PN 0.60 to these pipes and welding of flanges in two layers to make the flanged joint strong and leak proof. The pipe of 10 ft length is to be weld on both sides with flanges using welding rod of reputed make. The job includes all types of skilled labours, arrangement of power supply/ diesel Generator set etc required for the job including P/F of suitable size nuts bolts and R.I Gasket in the flanged joints of column pipes. The job further includes cutting of 2 no. rectangular cable slots in each flange.The dia of pipe is 65 MM.Prefered makes:- Surya, Jindal, Tata
20
3940
78800
... More
Providing, fitting and testing of 80mm dia G.I flanged Rising Main at site. The Pipe shall be hot dip Galvanized, class C of 100mm confirming to IS 1239. The job includes providing and fitting of M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16). The flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make.
Flanges (as per IS 6392/1997 Table:17)
Thickness shall conform to IS 6392 Part 1st Table-17. The flange welding shall be carried out in double layers using reputed make electrodes to form strong welding joint.
Welding Electrode
DC Arc Welding using welding electrode having diameter not less than 4mm.
Nuts and Bolts
Nuts and Bolts (conforming to IS:1363 Part 1st)
Rubber Insertion Gaskets
Rubber Insertion Gaskets (conforming to IS: 638/79) to be used between flanged joints. Prefered makes:- Surya, Jindal, Tata
550
1485
816750
... More
Earth work in excavation by manual means in trenches for foundation , drains ,pipes , cables (not exceeding 1.5 m in width ) and for shafts , wells , cesspits and the like not exceeding 10 sqm on plan , including dressing of sides and reaming of bottom lift upto 1.5 m , including getting out excavated earth and disposal of surplus excavated earth as directed.
-
-
-
... More
i. All kinds of soil (80 % ) 01 meter from cutting edge
169
479
80951
... More
ii. Ordinary rock (20%) 01 meter from cutting edge
42.26
924
39082.047999999995
... More
Filling available excavated earth in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth , consolidating each deposited layer by reaming and watering , lead upto 50 m ad lift upto 1.5m.
190.2
198
37792.74
... More
Providing and laying of soling stone including manual compaction
2.52
740
1864.8
... More
Centering and shuttering including stuttering , propping etc. and removal of form work for: Foundation , footings , bases for columns
12.45
286
3560.7
... More
a. Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering . all work upto plinth level with 1: 2 : 4 mix ( 1 cement , 2 coarse sand , 4 graded stone aggregate 20 mm nominal size)
11.18
6591
73690.175
... More
a.. Providing and laying in position 12 mm thick cement plaster of mix
1:4 ( 1 cement : 4 fine sand)
15.79
283
4481.202
... More
Fabrication, providing and fitting of washout Tee Junction out of 1 mtr of pipe with length of each arm one feet long shall be fabricated out of 80 mm dia. G.I C-class pipe with 16mm thick flanges fastened with weld joints on three ends.
1
4050
4050
... More
Providing, fitting and testing of PN 1.6/16 Ductile Iron double flanged, non-rising spindle , soft seated, glandless gate/ sluice valves as per IS14846 for regulating the water supply outside the pumping units .
The body and bonnent of the valve shall be of ductile iron, wedge with fully vulcanized EPDM rubber (Approved for drinking water) and NBR seal. The Gate/Sluice valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical positions
It shall have electrostatic epoxy coating (approved for drinking water) both inside and outside of the valve. The valve shall be supplied along with hand wheel.
Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work.
The job includes providing and fitting of 02 nos. M.S flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement. The job includes the cost on account of P/F of nuts, bolts and gasket required for the job. a) size 80 MM nominal diameter. Test certificates of material and hydrotest from the original equipment maunifacturer is to be submitted at the time of supply of material.Prefered makes:- VAG,Sigmaflow, flowserve.
2
15497
30994
... More
Providing, fitting and testing of PN 1.6/16 Ductile Iron double flanged, Slanted seat swing check valve ( NRV) as per IS 5312. The body shall be of ductile cast iron with fully encapsulated vulcanized EPDM rubber (Approved for drinking water). The valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical positions.
It shall have electrostatic epoxy coating (approved for drinking water) both inside and outside of the valve.
Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work.
The job includes providing and fitting of 02 nos. M.S flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with Rising main of the pumping unit at appropriate spots as per site requirement. The job includes the cost on account of P/F of nuts, bolts and gasket required for the job. a) size 80 MM nominal diameter Test certificates of material and hydrotest from the original equipment maunifacturer is to be submitted at the time of supply of material. Prefered makes:- VAG,Sigmaflow, flowserve.
2
17489
34978
... More
Providing, fitting , testing and commissioning of 50 mm ARV (Air Release valve ) as per IS 14845 to be fitted to G.I rising Main .. . the ARV Shall have the following specifications: -
i. Valve type - single chamber, single orifice.
ii. End connection - flanged ends to IS 1538 iii. Working temperature - 70 oc to 550 oc iv. Test pressure - body / seat 2.5 x PN
v. Sealing ring - EPDM
vi. Construction -ductile iron with stainless steel floats
vii. Coating - epoxy with corrosion resistance Besides the above works the job also includes cost on account of P/F of R.I gasket, nuts and bolts required for installation of ARV and arrangement of gas cutter/ welding set at site. The job also includes providing of 1 m 50mm dia gi b class pipe along with ball valve.Prefered makes:- VAG,Sigmaflow, flowserve.
2
19394
38788
... More
Fabrication ,Providing and fitting of 80 mm dia 90-120 degree bend/elbow to be fabricated out of Class B GI pipe, flanged on both ends a to make it leak proof. The flanges shall be M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and welded on both sides. The job includes nuts, bolts, gaskets etc as per site requirement.
10
2797
27970
... More
Fabrication, providing and fitting of split type MS clamps10 mm thick, 2 ft long and 3 inch wide for lowering and holding of submersible pumping unit fitted. The job includes the cost of required size of nuts and bolts. Size: 80mm
2
1801
3602
... More
Fabrication of MS Gantry mechanism by way of providing Structural steel in built up sections , trusses and framed work, including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer and two coats of enamel paint of approved shade complete in all aspects. The detailed drawing Shall be provided by the site incharge at the time of execution of work.
771
111
85581
... More
Providing, installation and testing of manual type triple spur gear chain pulley block along with monorail geared travelling trolley having following features
Gears:- The hoist shall have precision machine case Hardened alloy steel gear mounted on bearings and housed in a dust proof gear box. The lubrication of gears should be of high viscosity and temperature for longer life of gears.
Load Chain:- The load chain be made of high tensile alloy steel having wear resistance and greatest mobility. The chain should be accurately collaborated, tested and have adequate in built factor of safety for safer operation.
Load chain wheel:- the load chain well should be double ball bearing supported and Specially designed, perfectly machined wheel providing correct grip of load chain to makes the hoist most safe and reliable against any failure. The main specifications of C.P Block are given below : i. Make = INDEF/HERCULES make ii. Capacity = 2 ton (P)
iii. No. Of load chain falls = 2 or above
iv. Min. Height of lift = 6 M Test certificate of Manufacturer to be appended.
1
44473
44473
... More
Electrical Substation Works:
Supply , installation , commissioning and Creation of pole mounted , outdoor type 63 KVA Electric Sub Station as per the technical specifications given here under -Specifications conforming to IS : 1180 (Part 1) 2014 with latest amendments .
Type: HT/LT Transformer(Energy Level-II) with bimetallic terminal connectors.
Type of cooling: ONAN.
Operating conditions:
Input =11000 volts
Output =433 volts AC supply in 3- phase.
Terminals:
Input=3 No. HT bush rods with insulators, washer, nuts etc.
Output=4 No. LT bush rods switch insulators, washers, nuts etc.
Core: The core shall be of high permeability to reduce core losses and the strips shall be of suitable size and gauge. Transformer Coils: Suitable number of HT and LT coils in each leg of the core. The transformer coils shall be fabricated out of superior quality aluminum wire/strips, properly wound. The HT transformer is completely filled with suitable grade transformer oil up to required level. The job includes carriage, and all leads and lifts involved.
The HT transformer shall be of reputed make from an ISO certified company as per relevant standards and a test certificate shall be provided before installation. The transformer shall also be provided with breather fill with silica jel crystals , conservator with oil level indicator , explosion vet and adequate radiator fins/ Tubes. The impedance of transformer shall be as per IS:1180 (Part 1) 2014 with latest amendments.The job inludes proving and fitting of bimetallic conductors for connectiong with cable. NOTE: The scope of the work shall include obtaining of necessary inspection/clearance certificate from the concerned department for all the required equipment. The testing and commissioning shall be completed only after obtaining above certificate. prefered make :- Northern, ALBA, AE
1
171963
171963
... More
Providing and fitting G.I Channel /Angle/ Flat of sizes including clamps,V-cross,braces, F-Top etc
350
123
43050
... More
Supply, Installation, Testing and commissioning of Polymeric Gang operated Air break switch, outdoor type, triple pole, suitable for vertical installation, single break provided with locking arrangement at both ON and OFF position consisting of HT post double insulator, copper or copper alloy high pressure heavy contact assembly, rod with bearings , operating handle and 2 length of 32mm dia. GI pipe conforming to IS 1818 1961, 06 No. of insulators, rated voltage 11KV 200A 3 pole,complete as per IS specs.
2
11730
23460
... More
Supply, Installation, Testing and commissioning of 11KV polymer fuses Set Horn Gap 3-phase, 200 A suitable for vertical installation .
1
4983
4983
... More
Supply, Installation, Testing and commissioning of Gapless Surge arrestor station class, 10KA, 9KV, LA With polymer housing , Station Type .
1
7754
7754
... More
Supply and fitting of 11 KV polymeric composite pin insulator 12 KV, 5KN, Lighting impulse 75KV Positive, and 80 KV Negative , creepage distance 320 mm
10
347
3470
... More
Supply, installation, errection of 9 mtrs long H.T pole of specifications ST- 410 (sp-33) . the job further includes drilling of holes for installation of various accessories .wherever required the job further includes G.I wire earthing of pole as per REC standard.
Test certificates of manufacturer to be appended at the time of delivery.
7
20686
144802
... More
P/F of Galvanized nuts, bolts of various sizes as per site requirement.
20
142
2840
... More
P/F Danger Plate with clamps
7
153
1071
... More
Providing and fixing G.I Barbed wire for anti climbing.
14
136
1904
... More
Providing and fitting of Galvanized stay set with 50 X 8 mm Stay Clamp , Guy insulator (2no.), Anchor plate (200X200X6mm) , nuts and bolts , 2 N0- turn buckle , 1.8 m long , 16 mm diameter solid G.I stay rod & 7/3.15 mm dia. G.I stranded wire complete.
4
4922
19688
... More
Painting of poles Red oxide
7
306
2142
... More
Painting of poles Aluminum paint
7
510
3570
... More
Providing and fitting of ACSR as per IS 398 (part-2) 1996 for 50 sq.mm ACSR (Galvanised steel reinforced) for fitment of various accessories
10
56
560
... More
Supply, Installation and Testing of 35 Sq mm XLPE Aluminum H.T cable (ABC type ) of 11 KV grade with following specs.
Size (cross sectional area in sq mm) = 3×35
Phases: Red, Yellow, Blue . Test certificates of maunifacturer to be appended at the time of dellivery.Prefered makes:- Havells, L&T, Gloster,Finolex.
60
818
49080
... More
Providing and fitting of Anchoring clamps comprising clamp body , plastic wedge, steel bill bracket , straps and buckles or nuts and bolts required for holding of 3 – Core , 35 Sq. mm H.T AB Cable.
2
457
914
... More
P/F of 11 KV cable termination kit for connecting 35 Sq mm XLPE cable (ABC type) with the existing HT line near tapping point and HT transformer.
Test certificates of maunifacturer to be appended at the time of delivery.
4
8994
35976
... More
Providing and fitting of LT Distribution box for H.T transformer with 200A, 50KA MCCB For incomer and 100A SFU for outgoing circuits (capacity of H.T Transformer is 63 KVA).
1
28118
28118
... More
Providing and laying of ACSR Conductor of size 0.03
350
37
12950
... More
P/I/T/C of LT 3 phase, 4 wire, Prodigy meter of capacity suitable for 63KVA Substation, 415 V, 50 Hz preferably of Secure/L&T make with all accessories & fittings, cabling required as pe site requirement.The job includes providing and fitting of ms box for housing of prodigey meter in it along with locking arrangement. NOTE:- The job includes complete charging of subsation which includes getting clearnace from PDD and sealing of meter etc.
1
28000
28000
... More
Control panel and wiring:-Fabrication, Providing and fitting of MUG 30 Modular motor control panel of appropriate size fabricated out of 14 SWG sheet having required openings/vents and protection Class : IP-55 & fitted with accessories as under:
a) Bus bar Chamber: The bus bar chamber shall be fitted at the top of the panel horizontally throughout the length. There shall be 3 Nos. of phase bus bar and 1 No neutral bus bar and 1 No earthing bus bar. The bus bars shall be air insulated and made-up of high conductivity COPPER with current density of suitable rating for 100 Ampere. All panel compartments shall be provided with suitable cable alley and vertical bus bar alley. Suitable segregation shall be provided in between bus bar chamber and adjoining compartments. The bus bar shall be PVC sleeved with color strips of red, yellow, blue and black and the same be arranged in accordance with IS-375 specs. Electrical clearances shall be maintained between phases, neutral and body as per standards.
b) Main Circuit Breaker (IncomerD-Sine MCCB):
Qty. = 02 no.No. of poles = 4 Pole
Current Rating :200 A
Rated operational voltage = 415 V + 15 % Rated frequency = 50+/-3%Hz Ambient temperature = 40C˚
Ultimate S.C Breaking Cap at (415V AC, 50 Hz) = 50KA = Thermal-Magnetic Overload protection = 0.8 – 1×ln adjustable Short-circuit protection = 6-10×ln adjustable.
c) Change over Switch:
Current Rating=100A Digital Motor Protection Relay MM10 of L&T with LCD Display for 3-phase supply with following protections suitable for the Modular Control Panel:-
Protections = Thermal Overload with pre-alarm, Short Circuit, Phase Loss, Unbalance, Phase reversal, Under Current, over current, Prolong starting, Locked Rotor, Under voltage, over voltage & Earth fault. Qty= 02 No.
h. M-power module for mobile starter for submersible motor 1P/3P 3 wire IVRS Languages – English , Hindi,
Suitable Region- North India Qty = 02 NO. i) Minelac for Over load and Under Voltage Qty= 02 NO.The panel shall be provided with phase indicator lamps (03 N0) and digital ammeter of range 0-60 A (02 nos), digital voltmeter of range 0-500 V (02 nos), and digital frequency meter (01 No). The enclosure of the panel shall be of excellent fit and finish, corrosion resistant and powder coated gliding hinges for smooth and noiseless movement of windows and advanced locking arrangements. The pannel shall be mounted on MS baseframe fabricated out of angle iron of sutable size to withstand the deadload of pannel which is included in the scope of work. I) MUG 30 details:-
i) Bus bar size( 10 mtrx .02 mtrx 0.003 mtr=8960 kg/m3 =5.38 kgs =100A ii) D-sine MCCB 4 pole (DN2 250N, 200, 50KA)=02 no. iii)Change over switch Front Operated onload 100A = 01 no.
iv)D sine MCCB 3 pole (DN0 125D, 100-125, 36KA) =02 no.
v) FASD 30HP (MUG30, 30-50Amp relay) =02 no.
vi)Auxiliary MCCB 63Amp vii)MM 10 of L@T (Motor Protection) Motor Protection ==02 no. viii) Module for mobile starter =02 no.
ix) Digital Meters ,(Digital Ammeter & Digital voltmeter 02 nos each) and Digital Freq Meter 01 no.
x) Indicators LS = 03no.
xi) Over load and Under Voltage Minlec = 02 no.
1
234576
234576
... More
Providing, fitting, testing and commissioning of 30 KVA voltage stabilizer as per specifications below: Type of voltage controller: Manually operated copper wound, 3-phase, AC power supply multi step.
Type of Regulator : Double plate type with electrolytic copper contacts.(Minimum eight steps)
Input voltage : 175-400 volts.(3 phase)
Output voltage : 400 ±10% volts.
Frequency : 50 ±3 C/S.
Windings : Electrolytic grade copper of adequate section, vacuum impregnated and Oven-dried.
Insulation : Fiber glass insulations to tested parameters.
Cooling : Naturally, Oil cooled
Temp. Rise (Max) : 30°C above ambient
Mounting : On Uni-directional wheels.
Correction rate : 30 volts per step
Wave form distortion : virtually nil
Duty cycle : 100% continuous.
Enclosure : MS sheet enclosure in pressed CGR Sheet powder coated with radiators.
Core laminates : High grade, low eddy loss, grain oriented silicon steel laminations.
Load : Three phase induction motor load.
Load Amperes (continuous)
Overload in 24-hours operation: 10% above continuous Ampere rating.
The voltage stabilizer shall have T-oil level indicator gauge preferably glass type tube or otherwise visible to naked eye. The top of the container to have a display panel for housing 02 numbers Digital voltmeters (0-500V) along with 4-way selector switch and set of neon indicators for incoming and outgoing phases (06 No’s).
Insulating media (T. Oil) of 11 KVA grade to be provided and filled upto top level, with dielectric strength of 5 KV at 4m air gap. The T-Oil of specific grade should be provided in separate barrels and filled at site upto top level.
The voltage Stabilizer shall be accepted with manufacturers dully stamped test certificate and shall have name plate with specifications. Reputed make
2
68108
136216
... More
Providing and Fitting of 3.5-Core, XLPE, 1.1KV and 11KV grade 35 square mm Armoured Aluminium Cable of various sizes conforming to IS: 7098 part 1st as service line from the HT transformer to control panel including necessary thimbling, crimping, taping etc.Prefered makes:- Havells, L&T, Gloster,Finolex.
50
380
19000
... More
Providing and fitting of 3-Core flat 16 square mm submersible copper cable conforming to IS: 694 (Part 1st) – 1964 & IS: 694 (Part 2nd) - 1964 for Submersible Pumping Unit and other electrical Equipments . The cable connections terminal shall be fitted with copper thimbles of required size. :Prefered makes:- Havells, L&T, Gloster,Finolex.
300
711
213300
... More
Providing and fitting of 25 mm square single core PVC insulated copper cable for interconnecting various electrical gadgets as per IS 694: 2010 along with thimbling as per requirement.The cable shall be laid in pvc conduits over the walls etc with proper clamping to it.Prefered makes:- Havells, L&T, Gloster,Finolex.
50
394
19700
... More
P/I of earthing station for 63 KVA electric substation, LT panel, DG Set and voltage stabilizer comprising of company fabricated earthing electrode as per IS: 3043. The job includes Auguring of bore of required dia/depth for installation of electrode along with backfill compound mixed with soil and all other items required thereof for achieving the best result. The job includes connecting of electric gadgets through GI strip as per relevant standards. Safe earthing electrode size : 80 mm dia , Length : 2000 mm
Back fill compound : 30 kg The job includes providing and fitting of GI Mainhole along with cover in 1:2:4 cement concrete block.
6
10462
62772
... More
Supply, installation of 6 kg Co2 type fire extinguisher manufactured as per IS:15683 OF 2006 with IS mark and comply with DGMS(Approval) . The co2 extinguisher should be suitable for class B & C fire and also for fire involving electrical equipments. the cylinder used for fire extinguisher shall be approved by protroleum and explosive safety organization(PESO) as per gas cylinder rules 2004 and as per IS: 7285 of 2004. The body should be made of seamless steel (manganese) confirming to IS:7285 with IS mark and should be provided with squeeze grip nozzle and should be filled with co2 confirming to IS : 15222 of 2002 with certificate. The extinguisher shall be provided with manufactures test certificate and hydraulic test certificate by BIS from PESO.
2
6447
12894
... More
Illumination of Premises:
Providing and erection of 9 Mtr long Hot Dip Galvanized octagonal pole (single Section) with bottom 150mm, top 75mm wide, thickness 3mm with 70 Microns Zinc coating having inside arrangement for providing of power connection along with following items.
1) 3 Way Terminal Connector 20 Amp.
2) 3 No MCB 8 Amp. The job includes fabrication, providing and fitting of three arm GI structure at the top having 120˚ angle between arms and each arm having 15˚ inclination with respect to horizontal plane. Each arm should be of 2’ length and size and shape appropriate as per requirement of the luminary.
The job also includes providing and fitting of required length of flexible multi strand 2 mm copper wire from each terminal connector to each holding arm.
The pole is mounted on 1:2:4 Cement concreting of size not less than 2’x2’x6” ( cost of concreting not included in the job) using 04 No anchor bolts of required size not less than 7” in length. The complete job includes earthing in GI Electrode as per relevant IS Code
1
22226
22226
... More
Providing, installation, testing and commissioning of area lighting 120 Watt LED (Street Light Type) on top of octagonal pole Having following specs:
Input: 90-240 V 50 Hz
Power Factor: >0.9
Colour Temperature: 4K - 6.5K
Beam Angle: 120˚ - 170˚
Lumens: >12000
Operating Temperature: -20˚C to 60˚C
The LED is pressure die cast aluminum housing with power coated finish and having Ingress Protection up to IP-68.
The LED is properly fitted on the arm of the pole and connected to the copper wire as provided in the high mast pole .Prefered makes:- Havells, Phillips, L&T
3
9486
28458
... More
Providing Laying and connection of 2Cx10 mm² XLPE Aluminum Armored Cable from the connector of high mast pole to the stabilizer. The job includes underground laying or overhanging along with thimbling as per requirement and directions of the site in-charge .Prefered makes:- Havells, L&T, Gloster,Finolex.
60
162
9720
... More
Providing and installation of Junction Box with DP 32 A MCB to serve as Main switch for LED Lighting. The job includes making of electric connection to the circuit.
1
2227
2227
... More
Providing, Installation and testing of wall mounted 2KVA fully automatic voltage stabilizer with time delay with input voltage 70-240 V and output 220 V. The stabilizer shall be installed and connected to the electric circuit as per location provided by site incharge.
1
8154
8154
... More
Supply, installation, Testing & commissioning of 1000VA Full Sine wave power inverter (Make: Microtek/Luminous) including Providing / Installation of 12V, 180AH Tubular inverter Battery with trolley and cover. (Make: Amaron /Exide) with 2-core 6mm2 Cu wiring as per site requirement along with other accessories like SS-Combine (02 No’s), 3-pin plugs ,lighting points 6No along with Led bulbs 12 W 6No of reputed make for proper fitment and installation of the item.The job inludes providing and fitting of 3 no lighting points along with acessories required for complete job.
1
34053
34053
... More
Miscellaneous Items: Providing, laying & fixing with adhesive/bonding material of insulation rubber mats on the floor of the pump house, covering area around electro-mechanical machinery for safeguarding the life & limb of the workmen due to possible leakage of current & short circuit. The floor surface shall be made good & shall be free from dust, grease, foreign material & moisture free. The mats shall be as per IS 15652:2006 & shall have the following specifications: -
Composition: Rubber (synthetic mats for electrical purpose)
Thickness: - 2.5mm Size: - 1M wide.
Preferable Make: - Safe Volt
The rubber mats shall be accepted with manufacturers test certificate
10
1205
12050
... More
TOOL KIT For Maintenance: -
The Tool Kit for maintenance shall comprise of the following and all the items as mentioned below shall be of Taparia make:
Providing of tool kit consists of following items i. Double ended Spanner (Chrome plated) of size in mm
6/7,8/9,10/11,12/13,14/15,16/17,18/19,20/22,21/23,24/26,25/28, 24/27, 30/32 make – Taparia each – 02 no. ii. double ended Ring spanners chrome plated of size in mm 6/7,8/9,10/11,12/13,14/15,16/17,18/19,20/22,21/23,24/26,25/28, 24/27, 30/32 make – Taparia each – 02 no. iii. Allen key set black finish of size in mm 1.5, 2, 2.5, 3, 4,5,6,8,10 make – Taparia each – 2 NO.
iv. Combination Pliers insulated with thick C.A sleeve ; size in mm 165, 210, 255 make – taparia each – 02 No.
v. Long nose plier insulated with thick C.A sleeve ; size in mm 165, 205 make – taparia each – 02 No.
vi. Side cutting plier insulated with thick C.A sleeve ; size in mm 165, 205 make – taparia each – 02 No.
vii. Insulated screw Drivers ( make – Taparia)
Blade length in mm Blade dia. in mm Tip dimensions in mm Quantity 50 3 1.6 x 0.4 02
75 3 1.6 x0.4 02
100 3 3 x 0.4 02
125 3.5 3.5 x 0.5 02
150 3.5 3.5 x 0.5 02
200 4 4 x 0.6 02
300 5 5 x 0.8 02
viii. Hammer with handle weight – 110 mg , 340 gm , 600 gm –each – 1No. Make Taparia. ix. Heavy duty pipe Wrench length in mm - 200, 300, 600 each – 01 No. Make Taparia.
x. Electric Multimeter=1No (Fluke/Meco/scemens/Mastech)
xi. Digital multimeter – 1No.(Fluke/Meco/scemens/Mastech)
xii. Digital Clamp tester capable to measure up to 400A - 1 No.
xiii. Hack saw frame with hack saw blade – 01 no.
xiv. S-16 MXL, S- 16 H X L Socket Set( 19 sockets + 6 Accessories) – 01 No. make Taparia
xv. Digital vernier calliper 01 no.
1
28840
28840
... More
Fabrication of 6’ x 6’ angle iron bed by way of providing and fitting of Structural steel in built up sections , trusses and framed work, including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer all complete welded
94.75
102
9664.5
... More
Providing and fitting of 19 mm thick multilayered ply sheet of size 6 x 3 feet , 2 nos including cutting , fixing all complete including painting of the play sheet by one coat of primer and two coats of enamel paint
36
154
5544
... More
a) Providing of good quality bedding for night stay/Shift consisting of: -
i) Mattress with warm cover size 6'x3' (6Kg)- 02 No’s
ii) Quilt with warm cover size 5'x8' (6Kg)- 02 No’s
iii) Pillows with covers - 02 No’s
iv) Single bed warm blankets with one sided Fur- 02 No’s
The filling material for mattress, quilt and pillow shall be of good quality cotton
b) The job also includes providing of pressure cooker 5ltr 02 No’s, Steel patila( utensil) 5ltrs 02 No’s, cooking heater 01 No., room heater 01 No., steel buckets 10 litre capacity 01 No., Plastic bucket 10 litre capacity with Mug 02 No’s each, steel glasses 06 No’s, steel Plates with large spoons and bowls 03 No’s each, Cup and Saucer set (01 No. Set) and, 5kg Gas cylinder with burner/ stove. All the utensils shall be of Prestige, Pigeon, Wonder chef, United, Futura make.
The job also includes providing of thermo-cool 15’x12’ along with excel matting of 15’x12’ size. The job also includes providing of unbreakable Plastic Chair table set consisting of chairs 04 No’s, extra heavy Table 01 No. of Samruddhi/ Neel kamal/Supreme /Anmol Make. The job also includes providing of good quality safety Door locks (03 No’s) of Godrej, Link locks, Thapar make.
1
39619
39619
... More
Providing of solar/ electrical lantern chargeable on both solar & electrical 220v supply.
2
1911
3822
... More
Providing of bamboo ladders 18 feet long along with 15 feet long Link rods and HT Glove pair (01 No each)
1
7350
7350
... More
Providing of 1 KW heat convector for operators for winter season.
2
1205
2410
... More
Providing and fitting of 01 No. angle iron/sheet metal board duly painted showing various specifications of the mechanical and electrical equipments installed at site. Size: 4’×6’ out MS ANGLE OF 40 X 40 X 5 of 36 rft and MS sheet of 1 mm thick total weight of 50.16 kgs
24
250
6000
... More
Providing and fitting of 01 No. LED (scroll type) sign board fabricated out of stainless steel and metal showing the names of water supply scheme and the Department. Size: 6’×1’6”
9
3998
35982
... More
Providing, installation, Testing & commissioning of 415 ±10%V (output), 3 phase 35 KVA fluid cooled Diesel Generator set as per IS 8528 (2018) and ISO 3046 (2002) for engine and IEC/IS 60034-1 for alternator suitably assembled and fitted in a pollution free acoustic enclosure / canopy of required size as per Ministry of Environment protection rule 1986 read with latest amendments. The DG Set is required to be fitted and tested on load at site. The DG Set shall have following specifications: The DG Set shall be able to operate at 1600 mtrs ASL (at actual site conditions) efficiently without causing any malfunctioning. The DG Set shall comprise of Diesel Engine and Alternator coupled together with heavy duty flexible coupling and mounted on M. S. Base Frame along with all standard accessories, Control Panel, Battery, M. S. Canopy, duly painted and conforming to noise reduction norms as per environmental protection rules 1986 as laid down by Ministry of Environmental (Protection) and Forest, read with GSR-371(E) Dated: 17-05-2002 at S. No 95 for emissions limits and GSR-371(E) Dated: 17-05-2002 at S. No 94 (Paragraph 1 and 3) for noise limits for the DG Set and as per the latest amendments if any.
Besides the above works the D.G set shall be provided with 12 V, 150 AH Lead acid battery of reputed make fitted inside the D.G set Canopy along with necessary accessories like fuel tank (inbuilt) etc and battery charger of required capacity.
DG Set should be rated for continuous duty with overload provision of 10% for the period not exceeding one hour in twelve hours.
A) ALTERNATOR :- The alternator shall be self-excited, self-regulated for 35 KVA rating and shall be brushless, continuous duty. The alternator shall be screen protected drip proof enclosure, and horizontal foot mounted in double bearing construction. a) Rated Output:30 KVA
b) Rated Speed: 1500 RPM c) Efficiency at full load 0.8 P.f. = Not less than 86.00% or as per relevant IS code. d) Total distortion factor = less than 3% e) Voltage: 415 V at 50 Hz f) Class of Insulation: H g) Enclosure: IP 23. h) Governor = Electronic
B). DIESEL ENGINE (Prime Mover) The Prime Mover shall be diesel driven to develop requisite BHP as per ISO-8528-part- I at 1500 RPM for the alternator rated as above with ambient temperature ranging from - 10C to +45C with 70% humidity. a) Speed: 1500 RPM b) Cooling System: Water cooled
c) Method of Start: Electric Start with a Key. d) Rated BHP: Suitable for 35 KVA output at NTP as per ISO-8528-part- I The engine shall be fitted with following accessories:- 1) Fuel Tank: The capacity of the fuel tank shall be so as to last for 12 hours of continuous running on full load. The fuel tank shall be mounted on an angle iron frame of suitable height and fabricated out of M.S. Sheet of 4 mm Thickness duly painted and fitted with connections for inlet, outlet and return and also to be provided with air vent, drain with valve, level indicator and fuel pipes complete in all respects. 2) Battery: Battery suitable for above capacity DG set.3) Starting System: Providing and Fitting of Terminals, Leads, C/W Charging Dynamo and fitted with 12 Volt Starting System. The system shall be able of starting of DG set with 20-30 Sec even in winter conditions with ambient temp down to -50C 4) Engine Instrument Panel: The Engine Instrument Panel shall be fitted with starting switch with keys, Lube Oil Gauge, Temperature & Pressure Gauge, Speedometer, Kilowatt Hour Meter etc and all other accessories as required. 5) Safety Control: The D. G. Set shall be provided & fitted with all the safety controls i.e. for Low lube oil Pressure indication switch, High water temperature indication, RPM indication, water temperature indication, battery charging indication etc.
1
750000
750000
... More
Providing and fitting of 35 sqmm 3.5 core , capable to work up to 1.1 KV , XLPE insulated , galvanized steel strip armored Aluminium cable conforming to IS : 7098(part -1) 1988 With latest amendments to be fitted from D.G Set to Modular control panel . The job includes providing and fitting of suitable rating Aluminium thimbles duly crimped and taped at conductor ends by hydraulic crimping tool. The job includes earth work in excavation wherever required for laying of cable underground.
50
380
19000
... More
Fabrication of CGI Shed for DG Set by way of Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of steel primer and two coats of approved paint all complete welded.
800
102
81600
... More
Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 350 gram/m2
100
852
85250
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements