Public Health Engineering Department Tender
... More
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Health Engineering Department - PHED Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date21 Dec 2024
Closing Date20 Jan 2025
Tender Amount₹ 11,52,87,000
Costs
EMD
₹ 23,05,740Document Cost
₹ 8,000Tender Fee
Refer Documents
Summary
Augmentation Of Water Supply Scheme Billawar Town Under Amrut 2.0
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PHE_268606_1Bid Award Id
ViewTender No
enit 64 of 2024-25Tender Authority
Public Health Engineering Department ViewPurchaser Address
-Website
http://http://jkphedwaterbilling.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Augmentation of water supply scheme Billawar Town under AMRUT 2.0 and Operation and Maintenance of scheme for 05 Years
BOQ Items
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing
not less than 88 gms.
4
248
993.8
... More
Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long
complete as per standard design.
4
23815
95263.2
... More
Extra for shuttering in circular work (20% of respective centering and
Shuttering items) Qty same as item no- 9 = (77.29 Sqm)
77.29
125
9722.31
... More
Centering and shuttering including strutting, propping etc and removal of form work for Walls(any thickness) including pilasters, butresses,plinth and string courses
etc.
24
628
15094.8
... More
Providing, & fixing G.I pipes complete G.I fitting excluding teenches and refilling etc (extranal work) Medium (80mm dia) M
3100
1151
3568720
... More
Arches, domes, vaults upto 6 m span For Dome
41.98
2281
95764.78
... More
Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc consisting of following operations. a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in- charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645
and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineerin-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs) c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge.d) finishing the surface with 20mm thick joint less cement mortar of mix 1:4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm/sq 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineerin- charge. With average thickness of 120mm and minimum thickness at khurra as 65 mm
139.8
1404
196370.07
... More
Extra for shuttering in circular work (20% of respective centering and
Shuttering items) Qty same as item no- 11 = (5.75 Sqm)
5.75
115
664.18
... More
Providing, installation, testing and commissioning of open well submersible pumping unit having following specification:
Pump:Type: Open Well Submersible type
Discharge: As mentioned below or as per site requirement. Dynamic Head: As mentioned below or as per site requirement. MOTOR /PRIME MOVER: Type: Speed: 2800-3000 RPM
Phases: Three - Phase AC supply , 50 Hz frequency Capacity: As recommended by Pump Manufacturer.
The Job also includes fabrication and fitting of reducer nipple and delivery line of 80 mm dia GI/MS pipe line having 1.6 PN rating sluice valve at appropriate place by way of flanges at both side and connected to the manifold and than connected to to Suction of HCP/ Filtertation Plant. The job also includes the Providing and fitting of the LT Control Panel, Submersible cable as per site requiremnt for the operation of the open well submersible motor. The complete job includes the cost of material, GI Pipe, cable, labour charges for fitting, transportation charges and other miscellaneous charges. The
Parameters of open well submersible pump set are mentioned below:Submersible 6000 GPH x (15-20) Mtr head
2
110000
220000
... More
Fabrication of the 01 nos board made out of angle iron and having a size of 06ft X 04 ft. The angle iron is to be welded at corners properly and flushed in all directions including its grinding or foiling to avoid body scratches. The panel board is to be surmounted with a ply of 06ft X 04 ft X 12mm thickness. The board shall have two legs at the corners and two legs are to be welded/grouted with the wall of the pump room. The job also includes the p/f of 01 no 415 volt, HRC fuse type main switch and 01 no Bus Bar, 03 no RYB phase indicator, voltmeter and ampere meter along with CT on board of reputed make conforming to IS standard of required specification for below mentioned connected load. The job also includes the P/F of cables of required size and length as per site for the connection of power supply of reputed make and conforming to IS
standards with proper thimbling. The job includes the cost of material, fixation, transport and labour charges.up to100 HP Load
4
90000
360000
... More
Providing & fitting fixing with pvc insulated single core multistrand copper cable of size mentioned below conforming to IS: 694 for inter
connection with all electrical equipments. 50 Sq mm
160
1430
228800
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings,
brackets, gates and similar works.
344.3
181
62524.88
... More
Centering and shuttering including strutting, propping etc. and removal of
form for Stairs (excluding landings) except spiral staircases. Steps
4.13
851
3515.25
... More
Carriage (Head Load) for Cement up to a lead of 500 m by Manual Labour
including loading, unloading and stacking.
41.3
269
11137.37
... More
Providing, installation, testing and commissioning of open well submersible pumping unit having following specification:
Pump:Type: Open Well Submersible type
Discharge: As mentioned below or as per site requirement. Dynamic Head: As mentioned below or as per site requirement. MOTOR /PRIME MOVER: Type: Speed: 2800-3000 RPM
Phases: Three - Phase AC supply , 50 Hz frequency Capacity: As recommended by Pump Manufacturer.
The Job also includes fabrication and fitting of reducer nipple and delivery line of 80 mm dia GI/MS pipe line having 1.6 PN rating sluice valve at appropriate place by way of flanges at both side and connected to the manifold and than connected to to Suction of HCP/ Filtertation Plant. The job also includes the Providing and fitting of the LT Control Panel, Submersible cable as per site requiremnt for the operation of the open well submersible motor. The complete job includes the cost of material, GI Pipe, cable, labour charges for fitting, transportation charges and other miscellaneous charges. The
Parameters of open well submersible pump set are mentioned below:Submersible 5000 GPH x (15-20) Mtr head
3
104500
313500
... More
Carriage of stone aggregate below 40 mm nominal size. up to a lead of 10 Km by Mechanical Transport
incl. loading, unloading and staking.
9.02
279
2516.94
... More
Laying old cement concrete interlocking paver blocks of any design/
shape laid in required line, level, curvature, colour and pattern over and
including 50 mm thick compacted bed of coarse sand, filling the joints
with fine sand etc. all complete as per the direction of Engineer-in- charge
3729.6
280
1047831.12
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All works above plinth
level upto floor V level
30.71
9412
289044.06
... More
Carriage of Sand, up to a lead of 10 Km by Mechanical Transport incl.
loading, unloading and staking.
40.37
279
11264.84
... More
Carrige of bricks lead up to 10 Km by Mechanical Transport incl. loading,
unloading and staking
4.46
744
3318.91
... More
Providing of PEA shaped gravel as per IS-4097 of 1967 with latest
amendments for gravel packing of tube well and shrouding during drilling and
stabilization of tube well.
70
4500
315000
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm
nominal size)
12.02
5202
62538.86
... More
Ropeway Nallah Crosing (75 M Length) Steel Bridge Crossing Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil
:
4
592
2371.6
... More
Carriage (Head Load) for Cement up to a lead of 500 m by Manual Labour including loading, unloading and stacking.
86.02
269
23197.01
... More
Protection Work Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed All kinds of
soil :
158.4
479
75921.12
... More
Providing &laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level in 1:3:6 (1 cement :3coarse sand : 6 graded stone upto 20mm thick size nominal size)
15.64
5733
89673.5
... More
Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 50 mm nominal bore
20
986
19723
... More
Providing, Laying and fitting of pipes in centrifugally cast (spun) Ductile Iron pipe of Class designation K - 9, conforming to IS : 8329 including labour for mechanical joints and ost of jointing material (bolts, nuts, gaskets, washers, rubber insertion etc),including providing and installing DI specials of class K-12 suitable for push-on jointing as per IS : 9523 (with external bitumen coating andinternal cement mortar lining).such as puddle pipes, heel bends, bends of any angle, flanged and socketed tees, gap pieces with machined socketed and spigot ends, double flange tapers, flanged gap pieces, tail pieces (one side flanged & other socketed), blind ends with flange etc. with jointing materials complete testing, disinfection and commissioning, complete as per the direction of the Engineer in charge including jointing material (bolts, nuts, gaskets, etc.) complete including testing. 1.6
MPa(16 kg/cm2)
-
-
-
... More
Supply & Fitting of Rawal plugs for fixing of Electrical fixtures
20
56
1138.8
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size) For plinth protection
6.7
5733
38415.12
... More
Extra for shuttering in circular work (20% of respective centering and
Shuttering items) Qty same as item no- 7 = (4.27 Sqm)
4.27
57
244.54
... More
Making knitted wire crates of approved mesh-size; including
weaving, binding sides and partitions, and binding top after filling; excluding cost of filling, stones and weaving materials
720
92
66888
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. For sides of GSR
7.9
218
1725.36
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable
separately. All works above plinth level upto floor V level
53.16
9412
500344.58
... More
Carriage (Head Load) for Cement up to a lead of 500 m by Manual Labour
including loading, unloading and stacking.
27.6
269
7442.89
... More
Providing, & fixing G.I pipes complete G.I fitting excluding teenches and refilling etc (extranal work) Medium (80mm dia) L
7415
878
6512223.75
... More
Drilling of Tube well Clearing of site by way of bush cutting , marking approach road, shifting of machinery and allied material, preparation of site, proper leveling for installation of machinery
1
90000
90000
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All works upto plinth
level
44.19
8021
354452.41
... More
Providing & Fixing & ROF (Rate of flow metre) including assembly & Testing
1
20000
20000
... More
Carriage of Sand, up to a lead of 10 Km by Mechanical Transport incl. loading, unloading and staking.
94.76
279
26441.83
... More
Providing and fixing of MS Rotatry bridge fabricatee IS 50x50x6mm angle suitable for bearing silt load of clarifier (dia 4.40m). The Job incuding central bearing assembly shaft and MS Sheels, stop wheels and detlector draft tube fabricatd out of MS sheets with proper Proforation as per site requirement, including placing in position with adequate rotating prime mover 3 phase 440 volt 50 Hz including fly wheel and MS Rail on fish plate grouted on top base of clarifier in cement concrete. The Job includes providing and installation of 3 phase cubical electrical panel 63 Amp capacity with appropriate rating 3 phase MCCB/OCB and panel of electrican motors incl. connecting with electrical PVC copper blades fabricated out of 50x50x6m angle & 3mm thick sheet incl. assembly with rotating system and central shaft.
1
160000
160000
... More
Providing and fixing of AC plain bends with accessdor of size 100 mm dia
12
500
6000
... More
Specification:- Pump:-
1. Type :- Horizontal( split casing /Multi stage)
2. Discharge :- As mentioned in parameters or as per site requirement
3. Totat dynamic head :- As mentioned in parameters or as per site requirement
4. Impeller:- Bronze
5. Pump casing:- Cast Iron
6. . Efficency:- Not less than 45 % 7.
speed :- 2800-3000 rpm
The pump shall confirm to IS-1520 code
MOTOR :-
A) Type :- Horizontal squirrel cage Induction Type
B) Rating: - Suitable for above parameters.
C) No of phases: 03 phase, 415 ±10% V
D) Winding:-Copper wound squirrel cage
E) Method of cooling: - Air cooled with fan mounted.
F)Method of Starting: star delta
The pump-motor should be mounted on a common base frame fabricated out of M.S channel of suitable size and duly fitted with T- type foundation bolts /nuts and washers to make the pumping unit vibration free. The pump and motor should be coupled through suitable coupling. The coupling faces checked for both angular and axial alignment with the help of tapered gauges/feeler gauges or dial indicator. Job includes Laying of foundation block for HCP of size 1.83 m (length) X
0.91 m (breadth) X 0.91 m (Depth) or as per site requirement. Disposing off the excavated material to a suitable place. Construction of foundation block by Providing and Fabricating a 10mm Tor steel bar mesh and placing the base frame on the mesh placed inside the shuttering after proper levelling. Fabrication of 06 nos. new Foundation bolts for the each HCP. These foundation bolts are to be fixing in the base frame and welding/fixing it with Tor steel mesh at appropriate places. Laying the block in 1:2:4 reinforced cement concrete mixture. Complete job involves skilled and semiskilled labour, cost of material and carriage charges of sand, bajree, 10mm dia. tor steel, Cement and allied materials along with hire charges of tools and tackles involved. The job also involves curing of laid block for 7 days.
Fabrication of suction line for HCPs using 80mm/100 mm dia. “B” Class G.I/M.S pipes as per requirement. Providing and fitting of 80 mm/100 mm dia., 12 mm thick, M.S flanges to the ends of the GI/MS Pipes by way of welding as per requirement. Providing and fitting of 80 mm/100 mm dia. M.S Bends (both long and short) welded with M.S flanges or end of the GI/MS pipe as per requirement. The alignment of the suction lines must be perfect. Fabrication of common suction manifold out of 150 mm dia. MS pipe. The Suction lines are also to be welded with the suction manifold and the suction pipe attached with the Sump tank is to be interconnected to the manifold by way of P/F of 100mm/150 mm dia. sluice valves PN1.6 of reputed ISI make as per site requirement.
Fabrication of delivery line for HCPs using 80mm/100 mm dia. “B” Class G.I/M.S pipes as per requirement. Providing and fitting of 80 mm/100 mm dia.12 mm thick, M.S flanges to the ends of the GI/MS Pipes by way of welding as per requirement. Providing and fitting of 80 mm/100 mm dia. M.S Bends (both long and short) welded with M.S flanges or end of the GI/MS pipe as per requirement. P/F of 01 No. 80 mm/100 mm dia. sluice valve and 1 no 80mm/100mmdia NRV PN1.6 on the delivery line by way of placing rubber gaskets in between flanges and the Valve and tightening them with the nuts and bolts. All the nuts, bolts and rubber gaskets are to be provided by the firm as per requirement. The alignment of the delivery lines must be perfect. Fabrication of common delivery manifold out of 150 mm dia. MS pipe. The delivery manifold shall be made vibration free by placing anchor blocks/supports at suitable places. The delivery lines are also to be welded with the delivery manifold and manifold is interconnected to the rising main by way of P/F of 01 No. 100 mm/150 mm dia., sluice valve and 01 no 100 mm/150 mm NRV on delivery manifold as per site requirement by way of placing rubber gaskets in between flanges and the Valve and tightening them with the nuts and bolts.
The Welding must be of superior quality and the welding rods used must be confirming to ISI Standards. Workmanship must be of the highest quality. The Job also includes the painting of all the pipes and fittings with superior quality paint in two coats and Fabrication, providing and fitting of washout Tee with arm length 1.2 feet each. The Tee shall be fabricated out of G.I/MS B-class pipe with M.S Flanges fastened with weld joints on three ends (As per site requirement). The complete Job includes the cost of material, such as GI/MS Pipes, sluice and Non return Valve, Nuts and Bolts, Gaskets, paint, welding material, other tools and tackles, technical & non-technical labour, transportation and other miscellaneous charges.
Note: Providing of third party inspection certificate of RITES/CEIL & Characteristic Curve of pumping equipment is compulsory and is to be approved from the concerned Engineer in incharge before installing.HCP 5000GPH x (150-180) Mtr Head at Filteration Plant
2
616300
1232600
... More
Carriage (Head Load) for Steel up to a lead of 500 m by Manual Labour including loading, unloading and stacking.
9.41
579
5451.02
... More
Carrige of Cement and Steel lead up to 10 Km by Mechanical Transport incl.
loading, unloading and staking
45.42
248
11265.52
... More
Centering and shuttering including strutting, propping etc and removal of form work for Supended floors, roofs, landings , balconies and access platforms
183.61
718
131868.7
... More
Providing, & fixing G.I pipes complete G.I fitting excluding teenches and refilling etc (extranal work) Medium ( 50mm dia)
4675
532
2490840
... More
Providing and laying factory made chamfered edge Cement Concrete
paver blocks in footpath, parks, lawns, drive ways or light traffic parking
etc, of required strength, thickness & size/ shape, made by table vibratory
method using PU mould, laid in required colou r& pattern over 50mm
thick compacted bed of sand, compacting and proper embedding/laying of
inter locking paver blocks into the sand bedding layer through vibratory
compaction by using plate vibrator, filling the joints with sand and cutting
of paver blocks as per required size and pattern, finishing and sweeping
extra sand complete all as per direction of Engineer-in-Charge.
16.93.1 60mm thick cement concrete paver block of M-35 grade with
approved colour, design & pattern
1598.4
875
1400118.48
... More
Providing and laying in position cement concrete of specified grade including curing but
excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
30.02
5202
156191.06
... More
Supply, & fixing of 6 amp. Switch
76
71
5409.3
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate CC Flooring at lvl 3.20
7.86
562
4418.5
... More
Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1:6 (1 cement: 6 coarse sand)
35.92
7571
271970.08
... More
Providing and fixing of air blower (Everest make or kay make) capable for providing compression @ 225 cum per minute @
0.35 kg/Sqm with suitable 3 phase induction motor with auxilary pipe system upto filter bds fitting prssure guge nozzels cement black base plate air check valves, non return valves, cement conc black in M-20 grade foundation bolt base frame fabricated out at 100mm MS channels, the job also includes PRV Pipe and Pipe fittings shurters and PVC 19/28 coper wive complete job & other elctrical controlling devices fitted on panel board complete Job along with stand by Blower.
1
300000
300000
... More
Providing and fitting of 3-Core flat submersible copper cable conforming to IS: 694 (Part 1st) – 1964 & IS: 694 (Part 2nd) - 1964 for the operation of above mentioned submersible Pumping Unit and length as per site requirement. The
cable connections terminal shall be fitted with copper thimbles of required size. 16 sq. mm
120
1629
195480
... More
Providing and fixing M.S tubular frames for doors, windows, ventilators and cupboard with rectangular /L-type sections, made of 1.60 mm thick
M.S Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of
C.C. 1:3:6 (1cement : 3 coarse sand :6 graded stone aggregate 20mm
nominal size) .Frame 130x65mm x2.5mm thick (Weight of section @ 6.99kg/m)
96.88
151
14701.54
... More
Fabrication, providing, fitting and lowering of B Class column pipe conforming to IS: 1239 of length 10 Rft into the production well up to the desired depth; The job includes Providing and welding of flanges conforming to IS: 6392, Table-17 and PN 16 to these pipes and welding of flanges in two layers to make the flanged joint strong and leak proof. The pipe of 10 ft length is to be weld on both sides with flanges using welding rod of reputed make. The job includes all types of skilled labours, arrangement of power supply/ diesel Generator set etc required for the job including P/F of suitable size nuts bolts and R.I Gasket in the flanged joints of column pipes. The job further includes cutting of 2 no. rectangular cable slots in each flange.80 mm dia
30
6990
209700
... More
Carriage (Head Load) for Cement up to a lead of 500 m by Manual Labour including loading, unloading and stacking.
111.84
269
30159.89
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete.
6.78
286
1941.45
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20 cm in depth, consolidating each depositedlayer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
13170.96
218
2876537.66
... More
Providing and fixing Bulk Flow Meterscomplete
with allied work. 100 mm dia
5
100000
500000
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete.
12.56
286
3596.56
... More
Providing and laying in position weigh batched design mix M-25 grade cement concrete for reinforced cement concrete work with weigh batcher attached with concrete mixer with or without hopper at site of work, using cement content as per approved design mix, but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete including curing , improve workability without impairing strength and durability as per direction of Engineer-incharge. All works above plinth level upto floor V level.
119.64
9412
1126057.66
... More
Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 25 mm nominal bore
10
691
6917
... More
Providing and laying in position machine batched and machine mixed design mix M- 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum.
Excess or less cement used as per design mix is content considered payable or recoverable separately. All works above plinth level upto floor V level
17.83
9412
167816.85
... More
Fabrication of gantry mechanism by way of fabrication and erection of M.S./ G.I. Pipe Gantry for extrection and lowering of submersible pump set along with column pipe. The job includes fabrication of 02 nos vertical members of M.S/ G.I Pipe 6" dia medium class each of height 15 ft. embedded in cement concrete block of 3'x3'x3' from bottom of the vertical column pipe 02 nos. It includes earth work for excavation of foundation of size 3'x3'x3' of cement concrete block for embedding of foot of vertical column. cast of cement concrete block in 1:2:4 mix of size 3'x3'x4'(1'AGL). Providing and embedding of 04 nos foundation blots of size 2'x16mm in eachblock. the job also includes providing and fitting of 02 nos MS plates 8 mm thick of size 2'x2' welding of 04 nos ribs at base of the column pipes and 02 nos MS plates 8 mm thick of size 1'x1' at the top of column pipes, welding of 04 nos ribs at the base of the vertical column pipes for strengthening of vertical column pipe, placing/welding of horizontal 4"dia-8ft pipe above the column vertical pipes. the job also includes providing and welding of main cross member made out of 4" dia M.S/G.I pipe-1.5 mtrs medium class on top. Making og one number MS steel ladder on side of vertical pipe fabricated out of MS angles (1.5' Length) of suitable size and shall be welded properly at an equidistant of 1 ft each from bottom to top of MS Column pipe. The job includes painting of pupes by way of making surface
smooth emert paper and initially giving one coat of red oxide and finally two coats of black enamel paint for smooth finish.
1
125000
125000
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied: W.C. pan with lSI marked white solid plastic seat and lid.
4
5632
22529.6
... More
Finishing walls with water proofing cement paint of required shade on New work (two or
more coats applied @ 3.84 kg/10sqm)
469.5
98
46363.13
... More
Drilling of gravel packed bore hole of 530 mm diameter for lowering of liner
assembly consisting of blind and strainer pipes of 250 mm dia mts in all types
of strata by drilling to suite requirements and conditions. The work excludes
cost of blind pipe and strainer pipe upto the depth of 300 mtrs.
a) From GL. to 200 meters below BGL
-
-
-
... More
Supply & fixing of Screws1 inch & 1.5 inch for fixing of electric Fixtures
20
56
1138.8
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable
separately. All works upto plinth level
40.94
8021
328383.83
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) For plinth protection
2.4
5733
13760.64
... More
Extra for brick work with common burnt clay bricks/cement concrete
bricks in superstructure above plinth level upto floor five level Qty same as item no 19(A+B)
9.3
1455
13537.55
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm
nominal size)
14.84
5202
77211.04
... More
Providing and fixing bolts including nuts and washers
complete.
12.98
131
1702.98
... More
Lintel, beams, plinth beams, girders, bressumers and cantilevers. For outer ring beam
16.6
577
9587.33
... More
Providing and fixing PTMT Bottle Trap for Wash basin and sink: Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260mm from the centre of the waste coupling 77 mm
breadth with 25 mm minimum water seal, weighing not less than 263 gms.
4
623
2492.4
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size)
73.72
5733
422680.99
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.
complete.50 mm thick with 20mm nominal size stone aggregate
36.44
562
20484.75
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and
binding all complete above plinth level Thermo- Mechanically Treated bars of grade Fe-500D or more. Qty of steel @100 Kg /Cum
1000
123
123200
... More
Carriage (Head Load) for Steel up to a lead of 200 m
by Manual Labour including loading, unloading and stacking.
1
359
359.5
... More
Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved
quality conforming to IS : 8931 15 mm nominal bore
16
583
9332
... More
Half brick masonry with common burnt clay (non-modular) bricks of class designation
7.5 in foundations and plinth including curing in : Cement mortar 1:3 ( 1
cement : 3 coarse sand)
36
981
35334
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth
as directed, within a lead of 50 metres: All kinds of soil :
122.48
256
31458.99
... More
Carriage of Cement from division head quarterf by Mechanical Transport incl. loading, unloading and staking.for an av. distance of 10 KM
111.84
248
27739.68
... More
Steel work welded in built up sections/framed work, including cutting,
hoisting, fixing in position and applying a priming coat of approved steel
primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and
similar works.
1066
181
193585.6
... More
Providing, fitting, testing and commissioning of voltage stabilizer as per below specifications:
Type of voltage controller: Manually operated copper wound, 3-phase, AC power supply multi step.
Type of Regulator : Double plate type with electrolytic copper contacts. Change over Switch: :
Qty. : 1No.
Make : reputed make
Rating : Suitable capicity
Type :Front operated, on load, 4 pole, 400 +15%V, 50 + 3%Hz. Input voltage :250-460 volts.(3 phase)
Output voltage :400 ±10% volts.
Frequency :50 ±3 C/S.
Windings : Electrolytic grade copper of adequate section, vacuum impregnated and Oven-dried. Insulation : Fibre glass insulations to tested parameters.
Cooling :Naturally, Oil cooled Temp. Rise (Max):30°C above ambient Mounting :On Uni-directional wheels. Correction rate :30 volts per step
Wave form distortion :virtually nil Duty cycle :100% continuous.
Enclosure : MS sheet enclosure in pressed CGR Sheet powder coated with radiators. Core laminates : High grade, low eddy loss, grain oriented silicon steel laminations. Load : Three phase induction motor load.
Load Amperes (continuous)
Overload in 24-hours operation: 10% above continuous Ampere rating.
The voltage stabilizer shall have T-oil level indicator gauge preferably glass type tube or otherwise visible to naked eye. The top of the container to have a display panel for housing 02 numbers Digital voltmeters (0-500V) along with 4-way selector switch and set of neon indicators for incoming and outgoing phases (06 No’s).
Insulating media (T. Oil) of 11 KVA grade to be provided and filled up to top level, with dielectric strength of 5 KV at 4m air gap. The T-Oil of specific grade should be provided in separate barrels and filled at site up to top level. The voltage Stabilizer shall be accepted with manufacturers dully stamped test certificate and shall have name plate with specifications.
The job also include P/F of Copper cable of reputed make conforming to IS code
and suitable capacity of required length as per site requirement for connection of power supply to voltage stabilizer 100KVA
2
368500
737000
... More
Centering and shuttering including strutting, propping etc. and removal of form for
Foundations, footings, bases of columns etc. for mass concrete. For raft
4.27
286
1222.71
... More
Extra for shuttering in circular work (20% of respective centering and
Shuttering items) Qty same as item no- 7 = (3.39 Sqm)
158.4
125
19925.14
... More
Extra for Brick work with common burnt clay bricks in superstructure above plinth level up to floor V level
35.92
1455
52286.95
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
2076.75
181
377137.8
... More
Filling available earth (excluding rock) in trenches,plinth,sides of foundation etc.in layer, not excluding 10cm in depth consolidated each layer by ramming and watering lead up to 50 mtr and lift up to 1.5 mtr
219.25
218
47884.2
... More
Carriage (Head Load) for Sand, stone aggregate below 40 mm nominal size. up to a lead of 500 m by Manual Labour including loading, unloading and
stacking.
303.16
593
180040.66
... More
Carriage (Head Load) for Bricks up to a lead of 500 m by Manual Labour including loading, unloading and stacking.
17.06
1108
18915.27
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of
grade Fe-500D or more. qty of steel for raft ,walls and dome @100 Kg /Cun
9410
123
1159312
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string
courses etc. For walls
77.29
628
48611.55
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete above plinth level Thermo- Mechanically Treated bars of grade Fe-500D or more. qty of steel for raft ,walls and dome(qty same as item no-6 @100 Kg /Cum)
4128
123
508569.6
... More
Providing & Fixing & 50mm dia PVC pipe for orifices in PST, Fludden & clarifier for collection of water in channels (20+20+10) = 50 No's
50
40
2000
... More
Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over
the specified cement content used is payable/ recoverable separately. Providing M- 30 grade concrete instead of M-25 grade BMC/RMC Qty same as item no 3 and 4 (11.6+17.83=29.43 Cum)
29.43
98
2907.68
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work uo to plinth level with 1: 4: 8 (1 cement : 4 sand : graded stone afgg, up
to 40mm niminal size
0.58
5202
3017.68
... More
Providing and Fixing of 80 mm dia PVC under drainage lateral 80mm thick fabricated out with 9mm perforations as per design in the provided at 60" along with PVC/RCC, Tees and end caps to be grouted in M-25 grade cement con. At ends the pressure rating 10Kg/Cm2
90
500
45000
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank
4000
8
35000
... More
Carriage of Sand, up to a lead of 10 Km by Mechanical Transport incl. loading, unloading and staking.
46.98
279
13109.3
... More
Brick work with common burnt clay (non-modular) bricks of class designation
7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement
: 6 coarse sand)
120.84
7571
914946.1
... More
Supply & fixing of 8 Way Gang box
12
94
1138.8
... More
Finishing walls with water proofing cement paint of required shade on New
work (two or more coats applied @ 3.84 kg/10sqm)
162.06
98
16003.43
... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers
113.12
577
65332.46
... More
Fabrication of 2’ x 6’ angle iron bench by way of providing and fitting of Structural steel in built up sections , trusses and framed work, including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer all
complete welded
4
5500
22000
... More
Extra for arches, domes, vaults exceeding 6 m span Qty as per item no -13 = 35.03 Sqm
35.03
1118
39193.32
... More
Construction of Operator Room With Toilet Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the
periphery of the area cleared.
80
1249
99928
... More
Carriage of Sand, up to a lead of 10 Km by Mechanical Transport incl. loading, unloading and staking.
31.13
279
8686.52
... More
Extra for shuttering in circular works (20%) Qty same as item no-8 =5.37Sqm
7.16
57
410.05
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces
5.36
5493
29447.3
... More
Carriage of Cement & Steel by Mechanical Transport from source (to be identified by engineer in charge) to site of work /dumping place (To be identified by engineer in charge)including cost for loading and unloading. For an av. distance of 10 Km
90.58
248
22465.57
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over
and including priming coat with water thinnable cement primer
853.48
164
140482.81
... More
Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and
shade with 6 mm thick hard board backing Rectangular shape 453x357 mm
4
1156
4625
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of
Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at1.00 meter spacing including cutting chases and making good the wall etc. 15mm nominal outer dia pipes
60
419
25185
... More
Arches, domes, vaults upto 6 m span For Dome
131.62
2281
300251.54
... More
Design , supply , installation , testing and commissioning of automatic power factor correction panel for improvement of power factor as per details given below:
input voltage = 380 ± 15 V
Ambient temp. = 0 c̊ to 50 c̊ Available Power Factor = 0.7 - 0.8
Target power factor = 0.98 lagging Switching time delay
On delay = 1 – 60 seconds
0ff delay = 1- 60 seconds
Control type = Binary/ intelligent CT Ratio programming = To be provided Programming link = To be provided
Auto Scroll = To be provided
Manual operation = To be provided
Display Parameters = PF (input/output), KW, Volt, Amps. Relay contacts = As per requirement
Dimensions = Adequate Bezel / panel Cut out = Adequate System protection = IP 55
Enclosure = Modular CRG Sheet , powder coated MCCB Main protection = As per requirement
MCCB (Individual Protection of capacitors) = As per requirement 3 No.
Power factor correction panel for improvement of power factor Suitable for connected
load upto:-up to 100 HP
4
126500
506000
... More
Providing and fixing G.I.bends 100 mm dia with MS plate including cutting
ang welding extra with distribution washout
8
1600
12800
... More
Supply & Fitting of 6 Amp 3- pin socket
4
237
949
... More
Carrige of Cement and Steel lead up to 10 Km by
Mechanical Transport incl. loading, unloading and
Staking
5.1
593
3028.79
... More
Providing, & fixing G.I pipes complete G.I fitting excluding teenches and refilling etc (extranal work) Medium ( 15mm dia)
2500
179
448000
... More
Supply, Laying & Termination of 3.5 core 4 Sqmm copper armond wire for pump to panel
200
189
37960
... More
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal
size) and curing complete
26
416
10829
... More
Providing and fixing G.I.bends 200 mm dia with MS plate including cutting ang welding extra with distribution washout
8
1600
12800
... More
From 200 meters to 250 meters
50
20000
1000000
... More
Demolishing dry brick pitching in floors, drains etc. including stacking
serviceable material and disposal of unserviceable material within 50
meters lead.
172.5
934
161115
... More
Providing installation testing commissioning of flash mixer assembly suitable for a dia 0.70 m comprising of SS chunners with verticle tyupe hollow shaft prime moves 3 phase 150 RPM. The Job includes constent bleed assembly with reduction gear box and operational gear to regulate the bleed. complete Job
1
100000
100000
... More
Carriage (Head Load) for Steel up to a lead of 500 m by Manual Labour including loading, unloading and stackin
22.04
579
12767.33
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodized (anodic coating not less than grade AC 10 as per IS : 1868) aluminum lever handles of approved quality
with necessary screws etc. complete.
4
747
2988.4
... More
Providing, & fixing G.I pipes complete G.I fitting excluding teenches and refilling etc (extranal work) Medium (65mm dia) L
3825
745
2850007.5
... More
Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 80 mm nominal bore
10
2605
26051.5
... More
Steel reinforcement for R.C.C. work including straightening, cutting,
bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. Qty Same as item no 6 @120 Kg /Cum
8988
123
1107321.6
... More
Carriage of Sand and stone aggregate upto 20mm by Mechanical Transport incl. loading, unloading and staking..for an av. distance of 10 KM
303.16
279
84593.77
... More
Extra for brick work with bricks of class designation 75 curved on plan
upto a mean radius not exceeding 6 meters. Qty same as item no-19 = 9.30 Cum
9.3
994
9247.92
... More
Specification:- Pump:-
1. Type :- Horizontal( split casing /Multi stage)
2. Discharge :- As mentioned in parameters or as per site requirement
3. Totat dynamic head :- As mentioned in parameters or as per site requirement
4. Impeller:- Bronze
5. Pump casing:- Cast Iron
6. . Efficency:- Not less than 45 % 7.
speed :- 2800-3000 rpm
The pump shall confirm to IS-1520 code
MOTOR :-
A) Type :- Horizontal squirrel cage Induction Type
B) Rating: - Suitable for above parameters.
C) No of phases: 03 phase, 415 ±10% V
D) Winding:-Copper wound squirrel cage
E) Method of cooling: - Air cooled with fan mounted.
F)Method of Starting: star delta
The pump-motor should be mounted on a common base frame fabricated out of M.S channel of suitable size and duly fitted with T- type foundation bolts /nuts and washers to make the pumping unit vibration free. The pump and motor should be coupled through suitable coupling. The coupling faces checked for both angular and axial alignment with the help of tapered gauges/feeler gauges or dial indicator. Job includes Laying of foundation block for HCP of size 1.83 m (length) X
0.91 m (breadth) X 0.91 m (Depth) or as per site requirement. Disposing off the excavated material to a suitable place. Construction of foundation block by Providing and Fabricating a 10mm Tor steel bar mesh and placing the base frame on the mesh placed inside the shuttering after proper levelling. Fabrication of 06 nos. new Foundation bolts for the each HCP. These foundation bolts are to be fixing in the base frame and welding/fixing it with Tor steel mesh at appropriate places. Laying the block in 1:2:4 reinforced cement concrete mixture. Complete job involves skilled and semiskilled labour, cost of material and carriage charges of sand, bajree, 10mm dia. tor steel, Cement and allied materials along with hire charges of tools and tackles involved. The job also involves curing of laid block for 7 days.
Fabrication of suction line for HCPs using 80mm/100 mm dia. “B” Class G.I/M.S pipes as per requirement. Providing and fitting of 80 mm/100 mm dia., 12 mm thick, M.S flanges to the ends of the GI/MS Pipes by way of welding as per requirement. Providing and fitting of 80 mm/100 mm dia. M.S Bends (both long and short) welded with M.S flanges or end of the GI/MS pipe as per requirement. The alignment of the suction lines must be perfect. Fabrication of common suction manifold out of 150 mm dia. MS pipe. The Suction lines are also to be welded with the suction manifold and the suction pipe attached with the Sump tank is to be interconnected to the manifold by way of P/F of 100mm/150 mm dia. sluice valves PN1.6 of reputed ISI make as per site requirement.
Fabrication of delivery line for HCPs using 80mm/100 mm dia. “B” Class G.I/M.S pipes as per requirement. Providing and fitting of 80 mm/100 mm dia.12 mm thick, M.S flanges to the ends of the GI/MS Pipes by way of welding as per requirement. Providing and fitting of 80 mm/100 mm dia. M.S Bends (both long and short) welded with M.S flanges or end of the GI/MS pipe as per requirement. P/F of 01 No. 80 mm/100 mm dia. sluice valve and 1 no 80mm/100mmdia NRV PN1.6 on the delivery line by way of placing rubber gaskets in between flanges and the Valve and tightening them with the nuts and bolts. All the nuts, bolts and rubber gaskets are to be provided by the firm as per requirement. The alignment of the delivery lines must be perfect. Fabrication of common delivery manifold out of 150 mm dia. MS pipe. The delivery manifold shall be made vibration free by placing anchor blocks/supports at suitable places. The delivery lines are also to be welded with the delivery manifold and manifold is interconnected to the rising main by way of P/F of 01 No. 100 mm/150 mm dia., sluice valve and 01 no 100 mm/150 mm NRV on delivery manifold as per site requirement by way of placing rubber gaskets in between flanges and the Valve and tightening them with the nuts and bolts.
The Welding must be of superior quality and the welding rods used must be confirming to ISI Standards. Workmanship must be of the highest quality. The Job also includes the painting of all the pipes and fittings with superior quality paint in two coats and Fabrication, providing and fitting of washout Tee with arm length 1.2 feet each. The Tee shall be fabricated out of G.I/MS B-class pipe with M.S Flanges fastened with weld joints on three ends (As per site requirement). The complete Job includes the cost of material, such as GI/MS Pipes, sluice and Non return Valve, Nuts and Bolts, Gaskets, paint, welding material, other tools and tackles, technical & non-technical labour, transportation and other miscellaneous charges.
Note: Providing of third party inspection certificate of RITES/CEIL & Characteristic Curve of pumping equipment is compulsory and is to be approved from the concerned Engineer in incharge before installing.HCP 8000GPH x (150-170) Mtr Head at CPS
2
796370
1592740
... More
12mm thick cement plaster of mix 1 : 4 (1 cement : 4 Coarse Sand)
625.28
283
177454.46
... More
Centering and shuttering including strutting, propping etc and removal of form work for Walls(any thickness) including pilasters, butresses,plinth and string courses etc.
824.13
628
518336.56
... More
Providing & fixing of 32mm dia Gipipe for railing of stairs & gallery
180
384
69120
... More
Supply, Laying & Termination of 3.5 Core 50 sqmm wire for Feeder to transformer
240
332
79716
... More
3rd YEAR
1
2096000
2096000
... More
Carriage (Head Load) for Steel up to a lead of 500 m by Manual Labour
including loading, unloading and stacking.
8.98
579
5201.93
... More
Providing and fixing aluminium round shape handle of outer dia 100 mm with
SS screws etc. Complete as per direction of Engineer-in-charge Powder coated minimum thickness 50 micron aluminum
24
95
2300.4
... More
Extra for every additional lift of 1.5 m or part thereof in
excavation/banking excavated or stacked material :Ordinary Rock.
419.38
161
67520.18
... More
Providing and fitting concealed internal Electrification of room including 12 Nos LED lights, Fan points 2 No., Fuse box 1 No., 6 no 15 Amp sockets with switch, 5 Amp 4 no. sockets with switch - of approved brand and 04 nos LED security lights 30 watts, Main switch with complete wiring, with MS bracket for pole mounting complete including service line upto a length of 10 meters. including under grond conduct pipes, wiring, steel boxes and switches for 12 No. light Points (internal) with holder and LED bulbs and external 4 Nos. with LED Security lights with required M.S Bracket for mainting (external grade) complete as directed by Engineer incharge. including necessary earthing as per electrical schedule manual.
1
100000
100000
... More
Providing and Fixing of mechanical equipemnt required for Alum solution tank with electrically driven Paddle asembly fitted with suitable reduction gear mechasism upto point of application in the flash mixer along with washout arragnements plus 25mm dia GI inlet water line from back was tank to alum with GI pipe specials and gate valve CB Galss pipe in electrical operating device complete Job
1
100000
100000
... More
Carriage (Head Load) for Sand, stone aggregate below 40 mm nominal size. up to a lead of 200 m by Manual Labour including loading, unloading and
stacking.
13.6
331
4511.66
... More
Providing and fixing G.I. chain link fabric fencing of required width in
mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,
bolts and washers as required complete as per the direction of Engineer-in-
charge. Made of G.I. wire of dia 4 mm
828
809
670597.2
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset
plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using flats 30x6mm for diagonal braces and central cross piece.
16.58
5338
88512.33
... More
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per
architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Powder coated aluminum (minimum thickness of powder
coated 50 microns)
134.17
514
69001.57
... More
Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over the specified cement content used is payable/ recoverable separately. Providing M-30 grade concrete instead of M-25 grade BMC/RMC Qty same as item no 3 and 4 (7.9+12.74=20.64 Cum)
41.28
98
4078.46
... More
Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers.
31.85
577
18394.97
... More
Carriage of steel from division head quarter by Mechanical Transport incl. loading, unloading and staking.for an av. distance of10 KM
22.04
248
5466.58
... More
Demolishing cement concrete manually/by mechanical means including
disposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or leaner mix (i/c equivalent design mix)
300
1725
517560
... More
Providing, & fixing G.I pipes complete G.I fitting excluding teenches and refilling etc (extranal work) Medium (100mm dia) M
1000
1434
1434000
... More
Providing and lowering of liner assembly 250 mm dia. Slotted. After welding
upto the desired length and design approved by the competent authority.
30
8500
255000
... More
Providing and fixing 12mm thick prelaminated particle boardflat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-l type- 11) in panelling fixed in aluminium doors, windows shutters and partition frames with C. P. brass I stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge Pre-laminated particle board with decorative lamination on one side and balancing
lamination on other side. For door
14.6
947
13832.04
... More
Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or
Ductile Iron Pipes including testing of joints and including the cost of
rubber gasket. 100 mm dia pipes
560
94
53088
... More
Extra for shuttering in circular work (20% of respective centering and
Shuttering items) Qty same as item no- 11 = (8.30 Sqm)
16.6
115
1917.47
... More
Providing and fixing aluminium tower bolts lSI marked anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
12
63
760.2
... More
Carriage (Head Load) for Steel up to a lead of 500 m by Manual Labour
including loading, unloading and stacking.
4.12
579
2386.63
... More
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and inforcement. All works upto plinth level 1:1½:3 (1 cement : 1½
coarse sand : 3 graded stone aggregate 20 mm nominal size)
36
7788
280382.4
... More
Welding of joints
100000
6
620000
... More
Construction of 20000 glns GSR Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50
metres: All kinds of soil :
98.35
256
25261.2
... More
ElectromechanicalSpecification:- Pump:-
1. Type :- Horizontal( split casing /Multi stage)
2. Discharge :- As mentioned in parameters or as per site requirement
3. Totat dynamic head :- As mentioned in parameters or as per site requirement
4. Impeller:- Bronze
5. Pump casing:- Cast Iron
6. . Efficency:- Not less than 45 % 7.
speed :- 2800-3000 rpm
The pump shall confirm to IS-1520 code
MOTOR :-
A) Type :- Horizontal squirrel cage Induction Type
B) Rating: - Suitable for above parameters.
C) No of phases: 03 phase, 415 ±10% V
D) Winding:-Copper wound squirrel cage
E) Method of cooling: - Air cooled with fan mounted.
F)Method of Starting: star delta
The pump-motor should be mounted on a common base frame fabricated out of M.S channel of suitable size and duly fitted with T- type foundation bolts /nuts and washers to make the pumping unit vibration free. The pump and motor should be coupled through suitable coupling. The coupling faces checked for both angular and axial alignment with the help of tapered gauges/feeler gauges or dial indicator. Job includes Laying of foundation block for HCP of size 1.83 m (length) X
0.91 m (breadth) X 0.91 m (Depth) or as per site requirement. Disposing off the excavated material to a suitable place. Construction of foundation block by Providing and Fabricating a 10mm Tor steel bar mesh and placing the base frame on the mesh placed inside the shuttering after proper levelling. Fabrication of 06 nos. new Foundation bolts for the each HCP. These foundation bolts are to be fixing in the base frame and welding/fixing it with Tor steel mesh at appropriate places. Laying the block in 1:2:4 reinforced cement concrete mixture. Complete job involves skilled and semiskilled labour, cost of material and carriage charges of sand, bajree, 10mm dia. tor steel, Cement and allied materials along with hire charges of tools and tackles involved. The job also involves curing of laid block for 7 days.
Fabrication of suction line for HCPs using 80mm/100 mm dia. “B” Class G.I/M.S pipes as per requirement. Providing and fitting of 80 mm/100 mm dia., 12 mm thick, M.S flanges to the ends of the GI/MS Pipes by way of welding as per requirement. Providing and fitting of 80 mm/100 mm dia. M.S Bends (both long and short) welded with M.S flanges or end of the GI/MS pipe as per requirement. The alignment of the suction lines must be perfect. Fabrication of common suction manifold out of 150 mm dia. MS pipe. The Suction lines are also to be welded with the suction manifold and the suction pipe attached with the Sump tank is to be interconnected to the manifold by way of P/F of 100mm/150 mm dia. sluice valves PN1.6 of reputed ISI make as per site requirement.
Fabrication of delivery line for HCPs using 80mm/100 mm dia. “B” Class G.I/M.S pipes as per requirement. Providing and fitting of 80 mm/100 mm dia.12 mm thick, M.S flanges to the ends of the GI/MS Pipes by way of welding as per requirement. Providing and fitting of 80 mm/100 mm dia. M.S Bends (both long and short) welded with M.S flanges or end of the GI/MS pipe as per requirement. P/F of 01 No. 80 mm/100 mm dia. sluice valve and 1 no 80mm/100mmdia NRV PN1.6 on the delivery line by way of placing rubber gaskets in between flanges and the Valve and tightening them with the nuts and bolts. All the nuts, bolts and rubber gaskets are to be provided by the firm as per requirement. The alignment of the delivery lines must be perfect. Fabrication of common delivery manifold out of 150 mm dia. MS pipe. The delivery manifold shall be made vibration free by placing anchor blocks/supports at suitable places. The delivery lines are also to be welded with the delivery manifold and manifold is interconnected to the rising main by way of P/F of 01 No. 100 mm/150 mm dia., sluice valve and 01 no 100 mm/150 mm NRV on delivery manifold as per site requirement by way of placing rubber gaskets in between flanges and the Valve and tightening them with the nuts and bolts.
The Welding must be of superior quality and the welding rods used must be confirming to ISI Standards. Workmanship must be of the highest quality. The Job also includes the painting of all the pipes and fittings with superior quality paint in two coats and Fabrication, providing and fitting of washout Tee with arm length 1.2 feet each. The Tee shall be fabricated out of G.I/MS B-class pipe with M.S Flanges fastened with weld joints on three ends (As per site requirement). The complete Job includes the cost of material, such as GI/MS Pipes, sluice and Non return Valve, Nuts and Bolts, Gaskets, paint, welding material, other tools and tackles, technical & non-technical labour, transportation and other miscellaneous charges.
Note: Providing of third party inspection certificate of RITES/CEIL & Characteristic Curve of pumping equipment is compulsory and is to be approved from the concerned Engineer in incharge before installing.
HCP 8000GPH x (220-250) Mtr Head at CPS
2
810000
1620000
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level with 1:4:8 (1 cement : 4 Sand : graded stone agg. upto 40mm niminal size)
3.46
5202
18002.03
... More
CONSTRUCTION OF 5,000 GALLONS PER HOUR CAPACITY RAPID SAND FILTERATION PLANT Earth work in bulk excavation by manual/mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil.
-
-
-
... More
Carrige of bricks lead up to 10 Km by Mechanical Transport incl. loading,
unloading and staking
59.45
744
44239.72
... More
Edges of slabs and breaks in floors and walls Under 20 cm wide
44
262
11536.8
... More
Pipe Network Cutting road and making good the same including supply of extra
quantities of material i.e. crushed aggregate, moorum screening, red bajri
and labour required. Bituminous portion
200
4000
800080
... More
Manual mean 40%
146.17
592
86664.19
... More
Providing & Laying of Rain water pvc pipe with 110 mm dia
25
366
9157.5
... More
Carriage (Head Load) for Sand, stone aggregate below 40 mm nominal size.
up to a lead of 500 m by Manual Labour including loading, unloading and stacking.
131.5
593
78095.22
... More
Providing , laying , jointing and testing S&S Centrifugally cast ductile Iron double chamber Class K-9 pressure pipes conforming to IS 8329:2000 with restrained Joints (bolt less) all complete. 100 mm dia pipe
2800
1285
3600240
... More
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a single 15 mm
C.P. brass pillar taps
4
4172
16689.6
... More
Earthing of the electromechanical equipments: 01 no earth for electrical equipments and 01 no earth for body earth of pumping machinery which includes digging of a pit in the earth which should not be less than 3m (10ft) from the ground level . A plate made up of GI with dimensions 60cm x 60cm x 3.18mm is buried vertical in the earth (earth pit) which should not be less than 3m (10ft) from the ground level. Put about 30 cm layer of powdered charcoal and lime mixture around the earth plate in alternate layers. Providing and fitting of 40 mm dia pipe of 2.5 m length and GI strip of 32mm X 05 mm along with nuts and bolts inside the pit. Providing and fitting of 25 mm dia slotted pipe for putting water inside the pit to maintain moisture. The job also includes the chamber made of brick masosanary with CI cover 45 cm x 45 cm. The job includes the cost of material, labour, transport charges and any other miscellaneous charges.(Note: The distance between the two earth should not be less than 06 mtrs).
4
40000
160000
... More
Arches, domes, vaults upto 6 m span For Dome
35.03
2281
79910.44
... More
Lintel, beams, plinth beams, girders, bressumers and cantilevers. For outer ring beam
6.78
577
3915.79
... More
Providing and Fitting of 3.5-Core, XLPE, Armored Aluminium Cable of suitable size and length conforming to IS: 7098 part
1st as service line from the HT transformer to voltage stabilizer including necessary thimbling, crimping, taping etc.120 sq.mm
100
2000
200000
... More
Painting with synthetic enamel paint of approved brand and manufacture
to give an even shade. Two or more coats on new work
4.74
131
624.97
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts,
nuts, rubber insertions etc. (the tail pieces if required will be paid
separately). ( 65 mm dia) Class-II
12
2900
34800
... More
Carriage of Cement & Steel lead by Mechanical Transport from source (to be identified by engineer in charge) to site of work/dumping place (To be identified by engineer in charge) including cost for loading and unloading. For an av. distance of 10 Km
21.38
248
5302.88
... More
Providing, & fixing G.I pipes complete G.I fitting excluding teenches and refilling etc (extranal work) Medium (20mm dia)
1500
227
341850
... More
Providing and laying of 4 crore 50 mm Aluminum cable to be laid as service line from nearest LT Pole upto main Pannel board incl. to be laid under ground
70
500
35000
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.For sides of GSR
4.24
218
926.02
... More
Development of bore hole by air compressor of adequate capacity to give clear
potable water free of sand and impurities. Stabilization and testing of bore well
by way of V.T/submersible pumpset as per IS code- part-1 2800 of 1991 & IS-
2800 part-II of 1979 reaffirmed with up to date amendments pump set till the
clear potable water having discharge as per specifications is yielded.
Fabrication, providing/ fitting of steel supporting structure for clamping of
Tube Well housing using 2 Nos. parallel ISMB-250 of 5 M length each and MS
Angle 40X40X6mm and MS Plate 10 mm thick with 2 Nos. cement concrete
blocks of size 1.00 M X1.00 MX 1.00 MI No. each of both ends,
1
550000
550000
... More
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion 110 mm
diametre
3
336
1008.9
... More
Providing and fixing G.I.bends 200 mm dia with MS plate including cutting ang
welding extra with distribution washout
4
1600
6400
... More
Extra for providing richer mixes at all floor levels. Qty same as item 4 and 5 (80.70+119.64=200.34
cum)
200.34
98
19793.59
... More
Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 20 mm nominal bore
5
513
2567
... More
Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes
conforming to IS : 8329. 100 mm dia. DI-K9 for wash out and inlet
70
1071
75005
... More
Providing and applying tack coat using hot straight run bitumen of grade –
VG-10, including heating the bitumen, spraying the bitumen with
mechanically operated spray unit fitted on bitumen boiler, cleaning and
preparing the existing road surface as per specifications.
4000
55
220800
... More
Providing Laying Fixing and Jointing ISI marked Wire
Roop 19mm Dia
300
386
115836
... More
Construction of 10000 glns GSR Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth
as directed, within a lead of 50 metres: All kinds of soil :
153.92
256
39534.35
... More
CEMENT PLASTER (IN FINE SAND)12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)
270.64
283
76807.63
... More
Providing and fixing C.I. Check valves (with cap) complete with bolts,
nuts, rubber insertions etc. (the tail pieces if required will be paid
separately). ( 100 mm dia) Class-II
5
5000
25000
... More
Design, fabrication, installation, testing and commissioning of LT control panel for the operation of H.C. induction Motor and Submersible motor of below mentioned pumping machinery. The LT panel shall be dust and vermin proof fabricated out of SWG CR sheet supported on MS angle of Suitable size and provision for fixing it on the ground with the help of foundation Bolts/ wall Mounted as per site requirement. The panels should be sturdy enough for vibration free operation and should be equipped with suitable locking/ sealing arrangement for each box. The structure should be provided with the suitable entry and exit holes for incoming and outgoing cables. The Panel should be given two coats of anti-rust primer and two coats of enamel paint for smooth and even finish.
Incoming Feeder: The incoming feeder for the operation induction/submersible motor must be equipped with a suitable capacity MCCB of Suitable breaking capacity. There must be Al./copper bus bars for all the three phases from the outgoing of the MCCB to all the three contactor. The panel must be fitted with 01 No. Volt 0-500 and 01 no ampere meter of suitable range with proper CT ratio showing voltage and current of all the three phases and RYB phase indicator lamps.
Outgoing Feeders: The outgoing feeders for the operation of induction motor/submersible motor must be fitted with following items:
1 Aiir break contactors. of suitable rating for each motor of reputed make conforming to IS code. as per site requirement. 1.Star-Delta timer for each motor 2. Motor Protection relays having all the features such as Overload, short circuit, under current, phase unbalance, Phase
sequence, Phase Loss, Earth fault, Dry running, Prolonged Starting/ Stalled rotor. The relay is be fitted on the door and it must be accessible by keeping the door of the panel closed.for each
3.Single Phase preventer.for each
4.02 No. indicator lamps for ON and TRIP indication.for each
5.02 No. Push Buttons for ON/OFF.for each
6.10 amp MCBs for protection of the control wiring.
7. Auto start with on delay timer.for each
8. Level controler sensor for auto ON/OFF of motors as per site requirement.
9. Volt meter and Ampere meter for each with proper CT ratio
10. Fault Display Indicator with Proper Layout,
11 Auto Phase Correction
The cabling of the Control panel must be done with the suitable rating multi strand copper cable to withstand the full load of running motors. The internal control wiring should be done with flexible PVC LT cable with proper thimbling at each end. The job also includes the P/F of cables of required size and lenght as per site for the connection of power supply to LT panel of reputed make and conforming to IS standards. The capacity of various LT panel to be installed are mentioned below or as per site requirements. (Note: Panel should be of outdoor type conforming to all standard as per IS code, if Panel have to install out side the pump room and Level controler will be install where Sump/ OHT are with in satation or as per site requirement.) up to 60 HP
2
244900
489800
... More
Providing, & fixing G.I pipes complete G.I fitting excluding teenches and refilling etc (extranal work) Medium (100mm dia) L
2800
1255
3514420
... More
Carriage (Head Load) for Cement up to a lead of 200
m by Manual Labour including loading, unloading and
stacking.
4.1
167
686.22
... More
Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water
proofing material in 50 kg of cement) Qty of cement as per item no-5= say 252 bags
504
63
31752
... More
Providing and lowering of liner assembly 250 mm dia. After welding upto the
desired length and design approved by the competent authority / Electric Logging
220
6000
1320000
... More
Extra for shuttering in circular works (20%) Qty same as item no-12 (A+B+C) = 65.63 Sqm
65.63
143
9427.09
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I. pipes
800.54
197
158066.62
... More
Carriage (Head Load) for Cement up to a lead of 500 m by Manual Labour including loading, unloading and stacking.
48.43
269
13060.12
... More
Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.
(1 kg of water proofing material in 50 kg of cement) Qty same as item no-4,5 @8 Bag/Cum
600
63
37800
... More
Edges of slabs and breaks in floors and walls Under 20 cm wide
109.44
262
28695.17
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.
complete.50 mm thick with 20mm nominal size stone aggregate
169
562
95003.35
... More
Painting with synthetic enamel paint of approved brand and manufacture
to give an even shade.Two or more coats on new work
900
131
118665
... More
Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over the specified cement content used is payable/ recoverable separately. Providing M-30 grade concrete instead of M-25 grade BMC/RMC Qty same as item no 4 and 5 (44.19+30.71 = 74.90 Cum)
74.9
98
7400.12
... More
Edges of slabs and breaks into floor & walls under 20 cm wide
283.16
262
74244.55
... More
Providing and fixing of MS rotating bridge fabricated IS 50x50x6mm angle suitable for bearing silt of PST (dia)
5.3m. The Job including cerival bearing assembly shaft and MS Wheels, Stop Wheels and deflector draft tube fabricated out of MS Sheet with Proper Proforatin as per site requrement, including placing in position with adequate rotating prime moves 3 phase 440 volt 50Hz inc. fly sheel and MS rail, on fish plate grouted on top base of PST in cement concrete. The Job ncludes provding and installation of 3 phase cubical electrical panel 63 Amp capcity with appropriate ratingt 3 hase MCCB/OCB and Automatic panel of electrical motors incl. connecting eith electrical PVC copper cable and on poll system. The Job includes fabriation and fitting f scraper blades fabricated out of 50x50x6mm angle & 3mm thick sheet including assembly with rotating system and central shaft.
1
200000
200000
... More
Extra for arches, domes, vaults exceeding 6 m span Qty as per item no -13 = 20.99 Sqm
41.98
1118
46969.32
... More
Supply of Silica sand as filter media of size 0.45 mm-0.7 mm having uniform co-efficient 1.3-1.75 and should be free from dust and other organic and inorganic impurities including carriage from source i.e Calcutta west Bengal
5.18
25000
129500
... More
a) Providing, Installation, Testing & Commissioning of Submersible Pumping Unit as per IS 8034 of reputed make with following specification under Billawar Town
Specification:- Pump:-
1.Type :- Mixed Flow .
2.Discharge :- As mentioned in parameters or as per site requirement
3.Totat dynamic head :- As mentioned in parameters or as per site requirement
4. Type of fluid to be handled -Clear Water
5. Impeller:- IS-8034 code
6. Pump casing:- Cast Iron 7.
Efficency:- Not less than 45 % 8.
speed :- 2800-3000 rpm
COUPLING: A suitable coupling arrangement provided with pump set.
Non Return Valve: - Non Return Valve of the suitable size provided above the pump discharge case. MOTOR:-
Speed: compatible with pump speed Working Volatge : 03 phase, 415 ±10% V
Rating - Suitable for above parameters Class of insulation - F/Suitable for above parameters
Submersible motor should be water filled water lubricated squirrel cage type having capacity for above pumping parameters. The motor should be sealed by radial rings to avoid mixing of well water with motor filled water.
b) The job includes providing and fitting of interlocking arrangement against any failure of coupling. It must be fabricated out of MS strips of suitable size and length
c) The job includes providing and fitting of appropriate size MS nipple 2 feet long threaded on one end and welded to same size MS flange of thickness 12mm at other end for 50mm/65mm/80 mm diameter column pipe as per site requirement. The threaded portion should be as per size of pumping out let for proper fixing.
d)Fabrication, providing and fitting of split type MS clamps10 mm thick, 2 ft long and 3 inch wide for lowering and holding of pumping unit fitted. The job includes the cost of required size of nuts and bolts. fitting of 3-Core flat submersible copper cable for Submersible Pumping Unit and other electrical Equipment. The cable connections terminal shall be fitted with copper thimbles of required size.
e) The job includes providing and fitting of R. I. cloth joints/rubber washers with nuts, bolts and washers for all joints of column pipe. The job also includes lowering of pumping unit in the well as per site requirements and Fabrication, providing and fitting of washout Tee with arm length 1.2 feet each. The Tee shall be fabricated out of G.I pipe with M.S Flanges fastened with weld joints on three ends (As per site requirement) and fitted with sluive valve as per site requirement. Then proper testing and commissioning of pumping unit on full load at site.
Note: Providing of third party inspection certificate of RITES/CEIL & Characteristic Curve of pumping equipment is
compulsory and is to be approved from the concerned Engineer in incharge before installing.
SPS 5000GPH x (80-100) Mtr Head
2
245000
490000
... More
Construction of 50000 glns GSR Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus
excavated earth as directed, within a lead of 50 metres: All kinds of soil :
304.86
256
78303.29
... More
SITC of Liquid Chlorinator dosing pump along with allied work. and supply of Hypochlorite solution in drums of suitable capacities for 12 months requirement (L.S)Supply of Hypochlorite solution in drums of suitable capacities for 12 months requirement.
2
160000
320000
... More
Providing and fixing of sluice valve confirming to IS:780 read with upto date ammendments standard make meant for Pipe gallery in filter beds required to operatd from operating planteform height 4.5m, hence suitable opearation to be provided the job includes, providing and fixing fubrication of tact pieces as per site reguirements inclueding nuts, bolts, ruber, insertions. the sluice valve shoud be fitted with extension nod pedstals etc. (Filter bed inlet & out let ) of dia 150mm
8
45000
360000
... More
Supply & Fitting of Fan dimmer for control of ceiling fan
4
272
1089.16
... More
Providing and laying D.I Specials of Clas K-12 suitabl for push on jointing as per IS 923 Up to 600 mm dia
12
17102
205224
... More
Centering and shuttering including strutting, propping etc and removal of
form for Suspended floors, roofs, landings, balconies and access platforms.
80.63
718
57908.47
... More
Carrige of Cement and Steel lead up to 10 Km by Mechanical Transport incl.
loading, unloading and staking
30.54
248
7574.84
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing withcement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In
75x75 mm deep chase
34.84
241
8412.12
... More
Providing and fixing of AC plain bends with accessdor of size 100 mm dia
6
500
3000
... More
Supply, Laying & Termination of 1.5 Sqmm wire for lighting
1080
23
25623
... More
Providing installation testing commissioning of monoblock pumping equipment capable of lifting of 35 cum per hour for a height at 20 m with 3 phse appropriate rate power induction moves with sturter assembly suction and delivery pipe and pipe fittings of required sec. upto back was tank, the job inc; all eclectrical operating devices fitted on pannel borad along with stand by motor
1
150000
150000
... More
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as
directed: All kinds of soil :
14634.4
479
7014267.92
... More
Providing and Fixing of CI Sluice valve (with cap ) complete with bolts, nuts, rubber, insertion. The sluice valve shold be fitted with extension ped stals etc (inside sludge pits) of dia 200m
3
55000
165000
... More
Structural steel work in built up sections, trusses and framed work,
including cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer all complete. Welded
10430
138
1441426
... More
Providing, laying & fixing with adhesive/bonding material of insulation rubber mats on the floor of the pump house, covering area around electro-mechanical machinery for safeguarding the life & limb of the workmen due to possible leakage of current & short circuit. The floor surface shall be made good & shall be free from dust, grease, foreign material & moisture free. The mats shall be as per IS 15652:2006 & shall have the following specifications: -
Composition: Rubber (synthetic mats for electrical purpose) Thickness: - 2.5mm Size: - 3M long.
The rubber mats shall be accepted with manufacturers test certificate.
4
9000
36000
... More
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin
mixer and geyser points of approved make conforming to IS : 8931 a) 15 mm nominal bore
12
582
6988.2
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone upto 40mm thick size nominal size)
20.66
5202
107491.91
... More
Supply, Laying & Termination of 2.5 Sqmm wire for lighting
360
33
11957.4
... More
Extra for brick work with common burnt clay bricks/cement concrete bricks in
superstructure above plinth level upto floor five level
120.84
1455
175900.75
... More
Carriage of surplus Excavated earth and dismantled material up to alead of 05 km ny Mechnical Transport incl. loading unloading and staking
1463.44
516
755193.58
... More
Providing and fitting of 01 No. angle iron/sheet metal board duly painted showing various specifications of the mechanical and electrical equipment to be installed at site of appropriate size as per site requirement.
4
10000
40000
... More
Extra for shuttering in circular work (20% of respective centering and
Shuttering items) Qty same as item no- 11 = (3.39 Sqm)
6.78
115
783.16
... More
Carriage of Sand, up to a lead of 10 Km by Mechanical Transport incl. loading, unloading andstaking.
4.58
279
1278
... More
Providing and fixing of AC plain bends with accessdor of size 100 mm dia
12
500
6000
... More
Providing and laying semi- dense Bituminous concrete using crushed
stone aggregates of specified grading, premixed with bituminous binder
and filler, transporting the hot mix to work site by tippers, laying with
paver finisher equipped with electronic sensor to the required grade, level
and alignment and rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction and density as per specification,
complete and as per directions of Engineer-in-Charge. 25 mm compacted thickness with bitumen of grade VG- 30 @
5% (percentage by weight of total mix) and lime filler @ 2% (percentage
by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90
TPH capacity.
4000
298
1194000
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
25.92
7275
188574.48
... More
Centering and shuttering including strutting, propping etc and removal of form work for Lintels Beams, plinth beams, girders , bresssumers and cantilevers.
205.48
577
118674.97
... More
Carriage of stone aggregate below 40 mm nominal size. up to a lead of 10 Km by Mechanical Transport incl. loading, unloading and staking.
68.08
279
18997.04
... More
Lintel, beams, plinth beams, girders, bressumers and cantilevers. For outer ring beam
5.75
577
3320.91
... More
Extra for shuttering in circular work (20% of respective centering and
Shuttering items) Qty same as item no- 7 = (3.39 Sqm)
6.78
57
388.29
... More
Providing, fitting, testing and commissioning of voltage stabilizer as per below specifications:
Type of voltage controller: Manually operated copper wound, 3-phase, AC power supply multi step.
Type of Regulator : Double plate type with electrolytic copper contacts. Change over Switch: :
Qty. : 1No.
Make : reputed make
Rating : Suitable capicity
Type :Front operated, on load, 4 pole, 400 +15%V, 50 + 3%Hz. Input voltage :250-460 volts.(3 phase)
Output voltage :400 ±10% volts.
Frequency :50 ±3 C/S.
Windings : Electrolytic grade copper of adequate section, vacuum impregnated and Oven-dried. Insulation : Fibre glass insulations to tested parameters.
Cooling :Naturally, Oil cooled Temp. Rise (Max):30°C above ambient Mounting :On Uni-directional wheels. Correction rate :30 volts per step
Wave form distortion :virtually nil Duty cycle :100% continuous.
Enclosure : MS sheet enclosure in pressed CGR Sheet powder coated with radiators. Core laminates : High grade, low eddy loss, grain oriented silicon steel laminations. Load : Three phase induction motor load.
Load Amperes (continuous)
Overload in 24-hours operation: 10% above continuous Ampere rating.
The voltage stabilizer shall have T-oil level indicator gauge preferably glass type tube or otherwise visible to naked eye. The top of the container to have a display panel for housing 02 numbers Digital voltmeters (0-500V) along with 4-way selector switch and set of neon indicators for incoming and outgoing phases (06 No’s).
Insulating media (T. Oil) of 11 KVA grade to be provided and filled up to top level, with dielectric strength of 5 KV at 4m air gap. The T-Oil of specific grade should be provided in separate barrels and filled at site up to top level. The voltage Stabilizer shall be accepted with manufacturers dully stamped test certificate and shall have name plate with specifications.
The job also include P/F of Copper cable of reputed make conforming to IS code
and suitable capacity of required length as per site requirement for connection of power supply to voltage stabilizer. 150KVA
2
429000
858000
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All works above plinth level upto floor V level
25.48
9412
239819.03
... More
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete level. Thermo -Mechanically Treated bars of grade Fe-500 or more Qty. Vide item M30 below G/LQty. Vide item M30 above G/L
22037.4
123
2715007.68
... More
Carriage (Head Load) for Sand, stone aggregate below 40 mm nominal size.
up to a lead of 500 m by Manual Labour including loading, unloading and stacking.
87.02
593
51679.44
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size
stone aggregate Around Sump tank
62.22
562
34976.97
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All works upto plinth level
15.8
8021
126733.38
... More
Supply of MS wire 4 mm thick at site including carriage Loading and unloading
720
150
108000
... More
Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing
material in 50 kg of cement) Qty of cement as per item no-5= say 220 bags
220
63
13860
... More
Specification:- Pump:-
1. Type :- Horizontal( split casing /Multi stage)
2. Discharge :- As mentioned in parameters or as per site requirement
3. Totat dynamic head :- As mentioned in parameters or as per site requirement
4. Impeller:- Bronze
5. Pump casing:- Cast Iron
6. . Efficency:- Not less than 45 % 7.
speed :- 2800-3000 rpm
The pump shall confirm to IS-1520 code
MOTOR :-
A) Type :- Horizontal squirrel cage Induction Type
B) Rating: - Suitable for above parameters.
C) No of phases: 03 phase, 415 ±10% V
D) Winding:-Copper wound squirrel cage
E) Method of cooling: - Air cooled with fan mounted.
F)Method of Starting: star delta
The pump-motor should be mounted on a common base frame fabricated out of M.S channel of suitable size and duly fitted with T- type foundation bolts /nuts and washers to make the pumping unit vibration free. The pump and motor should be coupled through suitable coupling. The coupling faces checked for both angular and axial alignment with the help of tapered gauges/feeler gauges or dial indicator. Job includes Laying of foundation block for HCP of size 1.83 m (length) X
0.91 m (breadth) X 0.91 m (Depth) or as per site requirement. Disposing off the excavated material to a suitable place. Construction of foundation block by Providing and Fabricating a 10mm Tor steel bar mesh and placing the base frame on the mesh placed inside the shuttering after proper levelling. Fabrication of 06 nos. new Foundation bolts for the each HCP. These foundation bolts are to be fixing in the base frame and welding/fixing it with Tor steel mesh at appropriate places. Laying the block in 1:2:4 reinforced cement concrete mixture. Complete job involves skilled and semiskilled labour, cost of material and carriage charges of sand, bajree, 10mm dia. tor steel, Cement and allied materials along with hire charges of tools and tackles involved. The job also involves curing of laid block for 7 days.
Fabrication of suction line for HCPs using 80mm/100 mm dia. “B” Class G.I/M.S pipes as per requirement. Providing and fitting of 80 mm/100 mm dia., 12 mm thick, M.S flanges to the ends of the GI/MS Pipes by way of welding as per requirement. Providing and fitting of 80 mm/100 mm dia. M.S Bends (both long and short) welded with M.S flanges or end of the GI/MS pipe as per requirement. The alignment of the suction lines must be perfect. Fabrication of common suction manifold out of 150 mm dia. MS pipe. The Suction lines are also to be welded with the suction manifold and the suction pipe attached with the Sump tank is to be interconnected to the manifold by way of P/F of 100mm/150 mm dia. sluice valves PN1.6 of reputed ISI make as per site requirement.
Fabrication of delivery line for HCPs using 80mm/100 mm dia. “B” Class G.I/M.S pipes as per requirement. Providing and fitting of 80 mm/100 mm dia.12 mm thick, M.S flanges to the ends of the GI/MS Pipes by way of welding as per requirement. Providing and fitting of 80 mm/100 mm dia. M.S Bends (both long and short) welded with M.S flanges or end of the GI/MS pipe as per requirement. P/F of 01 No. 80 mm/100 mm dia. sluice valve and 1 no 80mm/100mmdia NRV PN1.6 on the delivery line by way of placing rubber gaskets in between flanges and the Valve and tightening them with the nuts and bolts. All the nuts, bolts and rubber gaskets are to be provided by the firm as per requirement. The alignment of the delivery lines must be perfect. Fabrication of common delivery manifold out of 150 mm dia. MS pipe. The delivery manifold shall be made vibration free by placing anchor blocks/supports at suitable places. The delivery lines are also to be welded with the delivery manifold and manifold is interconnected to the rising main by way of P/F of 01 No. 100 mm/150 mm dia., sluice valve and 01 no 100 mm/150 mm NRV on delivery manifold as per site requirement by way of placing rubber gaskets in between flanges and the Valve and tightening them with the nuts and bolts.
The Welding must be of superior quality and the welding rods used must be confirming to ISI Standards. Workmanship must be of the highest quality. The Job also includes the painting of all the pipes and fittings with superior quality paint in two coats and Fabrication, providing and fitting of washout Tee with arm length 1.2 feet each. The Tee shall be fabricated out of G.I/MS B-class pipe with M.S Flanges fastened with weld joints on three ends (As per site requirement). The complete Job includes the cost of material, such as GI/MS Pipes, sluice and Non return Valve, Nuts and Bolts, Gaskets, paint, welding material, other tools and tackles, technical & non-technical labour, transportation and other miscellaneous charges.
Note: Providing of third party inspection certificate of RITES/CEIL & Characteristic Curve of pumping equipment is compulsory and is to be approved from the concerned Engineer in incharge before installing.HCP 5000GPH x (220-250) Mtr Head at Existing 03 nos Pumping Stations
3
740000
2220000
... More
Providing installation testing commissioning of 3 phase oil immersed 30 KVA voltage stabilizer (servo make) capable to perate incoming voltae of 180 volt and outgoing voltage at 410+-10% volt complete Job
1
250000
250000
... More
Supply & Fixing of Pvc conduit of size 25 mm for cable laying
8
1898
15184
... More
Mechanical mean 60%
219.25
187
41065.53
... More
Finishing walls with water proofing cement paint of required shade on New work
(two or more coats applied @ 3.84 kg/10sqm)
123.62
98
12207.48
... More
Centering and shuttering including strutting, propping etc and removal of form work for foundation, footings, base for columns etc for mass concrete .
317.07
286
90792.99
... More
Carriage (Head Load) for Soling Stone up to a lead of 200 m by Manual Labour including loading, unloading and stacking.
864
390
337201.92
... More
Providing, & fixing G.I pipes complete G.I fitting excluding teenches and refilling etc (extranal work) Medium ( 40mm dia)
2225
434
967096.25
... More
Carriage of G.I Pipe by Head Load from dumping place to site of work including cost for loading and unloading. For an av. distance of 500m
175.66
340
59724.83
... More
Design, fabrication, installation, testing and commissioning of LT control panel for the operation of H.C. induction Motor and Submersible motor of below mentioned pumping machinery. The LT panel shall be dust and vermin proof fabricated out of SWG CR sheet supported on MS angle of Suitable size and provision for fixing it on the ground with the help of foundation Bolts/ wall Mounted as per site requirement. The panels should be sturdy enough for vibration free operation and should be equipped with suitable locking/ sealing arrangement for each box. The structure should be provided with the suitable entry and exit holes for incoming and outgoing cables. The Panel should be given two coats of anti-rust primer and two coats of enamel paint for smooth and even finish.
Incoming Feeder: The incoming feeder for the operation induction/submersible motor must be equipped with a suitable capacity MCCB of Suitable breaking capacity. There must be Al./copper bus bars for all the three phases from the outgoing of the MCCB to all the three contactor. The panel must be fitted with 01 No. Volt 0-500 and 01 no ampere meter of suitable range with proper CT ratio showing voltage and current of all the three phases and RYB phase indicator lamps.
Outgoing Feeders: The outgoing feeders for the operation of induction motor/submersible motor must be fitted with following items:
1 Aiir break contactors. of suitable rating for each motor of reputed make conforming to IS code. as per site requirement. 1.Star-Delta timer for each motor 2. Motor Protection relays having all the features such as Overload, short circuit, under current, phase unbalance, Phase
sequence, Phase Loss, Earth fault, Dry running, Prolonged Starting/ Stalled rotor. The relay is be fitted on the door and it must be accessible by keeping the door of the panel closed.for each
3.Single Phase preventer.for each
4.02 No. indicator lamps for ON and TRIP indication.for each
5.02 No. Push Buttons for ON/OFF.for each
6.10 amp MCBs for protection of the control wiring.
7. Auto start with on delay timer.for each
8. Level controler sensor for auto ON/OFF of motors as per site requirement.
9. Volt meter and Ampere meter for each with proper CT ratio
10. Fault Display Indicator with Proper Layout,
11 Auto Phase Correction
The cabling of the Control panel must be done with the suitable rating multi strand copper cable to withstand the full load of running motors. The internal control wiring should be done with flexible PVC LT cable with proper thimbling at each end. The job also includes the P/F of cables of required size and lenght as per site for the connection of power supply to LT panel of reputed make and conforming to IS standards. The capacity of various LT panel to be installed are mentioned below or as per site requirements. (Note: Panel should be of outdoor type conforming to all standard as per IS code, if Panel have to install out side the pump room and Level controler will be install where Sump/ OHT are with in satation or as per site requirement.) up to 20 HP
2
107150
214300
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm
thick with 20mm nominal size stone aggregate For plinth protection
22.62
562
12715.83
... More
Extra for shuttering in circular work (20% of respective centering and
Shuttering items) Qty same as item no- 9 = (117.56Sqm)
235.12
125
29575.74
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per
I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x510mm bowl depth 200mm
4
4380
17522
... More
Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)Qty of cement as per item no-3 and 4= say 361 bags
722
63
45486
... More
Carriage of stone aggregate below 40 mm nominal size. up to a lead of 10 Km by Mechanical Transport incl. loading, unloading and staking.
170.74
279
47643.29
... More
CEMENT PLASTER (IN FINE SAND)12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)
615.18
283
174588.08
... More
200mm
80
2895
231648
... More
Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming
to IS : 8329. 200 mm dia. DI-K9 for wash out
25
2980
74522.5
... More
Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 65 mm nominal bore
15
1646
24690.75
... More
Painting with synthetic enameled paints of approved brand and manufacture to give an even shade two or more coats on new work over an under coats of suitable shade with ordinary paints of approved brand and manufacture. New work (two or more coats) applied @ 3.84 kg/10 Sqm.
94.94
194
18480.07
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white
cement mixed with pigment of matching shade complete.
113.44
1299
147369.9
... More
Carriage of Pipe by Head Load from dumping place to site of work including cost for loading and unloading. For an av. distance of 500m ( 100 mm dia D.I Pipe
28
918
25731.16
... More
CEMENT PLASTER (IN FINE SAND)12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4
fine sand)
195.08
283
55363.7
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing withcement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In
75x75 mm deep chase
109.44
241
26424.29
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
176.24
628
110846.15
... More
Febrication of Manifold at site main 150 mm distribution 100mm
6
62377
374262.42
... More
Chlorinator with flow meter SITC of Liquid Chlorinator dosing pump along with allied work. and supply of Hypochlorite solution in drums of suitable capacities for 12 months requirement (L.S)chlorine solution I.e. sodium hypochlorite solution in pipe line of tube well. This shall include metering pump & motor, solution storage tank, ejector, sample cock and PVCpipe line etc.
2
30000
60000
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less
than 105 gms.
4
287
1150
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile
500x500 mm
20
1312
26257
... More
Supply, Installation of Saddle block 25 mm for fixing of conduit pipes
20
94
1898
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1cement:3sand:6graded stone aggr. 20mm nominal size) well rammed and consolidated and grouted with fine sand incl. finishing the top smooth.
45.04
572
25798.91
... More
Providing, & fixing G.I pipes complete G.I fitting excluding teenches and refilling etc (extranal work) Medium ( 25mm dia)
2000
311
623900
... More
Supply & Fiting of Angle Holders for fixing of LED Blubs
20
66
1328.6
... More
Extra for shuttering in circular works (20%) Qty same as item no-10 =272.40 Sqm
266.4
148
39563.06
... More
For shutters of doors, windows & ventilators including providing and fixing hinges I pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall
be paid for separately.) Powder coated aluminium (minimum thickness of powder coated 50 microns)
131.4
607
79815.28
... More
Providing and laying in position weigh batched design mix M-25 grade cement concrete for reinforced cement concrete work with weigh batcher attached with concrete mixer with or without hopper at site of work, using cement content as per approved design mix, but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete including curing , improve workability without impairing strength and durability as per direction of Engineer-incharge. All works upto plinth level.
80.7
8021
647302.77
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts,
nuts, rubber insertions etc. (the tail pieces if required will be paid
separately). ( 80 mm dia) Class-II
20
3500
70000
... More
Carriage (Head Load) for Sand, stone aggregate below 40 mm nominal size. up to a lead of 500 m by Manual Labour including loading, unloading and stacking.
265.5
593
157675.14
... More
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion 110 mm diametre
12
366
4395.6
... More
Finishing exterior & Interior with Water proofing cement paint of approved brand and manufacture to give an even shade new work(Two or more coats applied@3.84kg/10Sqmt)
898.07
98
88684.41
... More
CEMENT PLASTER (IN FINE SAND)12mm Cement plaster of mix: 1 : 4 ( 1
cement : 4 fine sand)
853.48
283
242217.62
... More
Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS
: 8329. 200 mm dia. DI-K9 for wash out
50
2980
149045
... More
Carrige of Cement and Steel lead up to 10 Km by Mechanical Transport incl. loading, unloading and staking
95.43
248
23669.5
... More
Carriage (Head Load) for Steel up to a lead of 500 m by Manual Labour
including loading, unloading and stacking.
2.94
579
1703.08
... More
Demolishing cement concrete manually/by mechanical means including
disposal of material within 50 meters lead as per direction of Engineer-incharge:1:4:8 or leaner mix (i/c equivalent design mix)
532.8
1064
567192.24
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar,
ladder, railings, brackets, gates and similar works.
688.6
181
125049.76
... More
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and inforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate
20 mm nominal size)
10
7788
77884
... More
Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc consisting of following operations. a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineerin-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs) c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge.d) finishing the surface with 20mm thick joint less cement mortar of mix 1:4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm/sq 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All aboveoperations to be done in order and as directed and specified by Engineerin- charge. With average thickness of 120mm and minimum thickness at khurra as 65 mm
34.84
1404
48938.01
... More
Chain Link Fencing Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as
directed: All kinds of soil :
18.99
479
9101.91
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete. For raft
11.94
286
3419.02
... More
Supply, Installation. Testing & Commissioning LED Flood Light Luminaire oquipped with specially designed heat sink, High performance electronic driver ensures zero, rnaintenance, High Surge Protection: 4KV, Average life L70B50. 50,000 hrs., Operating temperature:-10°C to +46°C Power 60W, Flux 4,2601m,Dimension(mm) |220X60X311,Welght 1,.8kg
32
1233
39478.4
... More
Carriage of Sand/ stone up to 20mm by H.L from source (to be identified by engineer in charge) to site of work/dumping place (To be identified by engineer in charge) including cost for loading and unloading. For an av. distance of 500 mtrs
37.97
593
22549.62
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer all complete.
31.2
120
3768.96
... More
Providing and fixing of MS rotating bridge fabricated IS 50x50x6mm angle suitable for bearing silt load of flocculater (dia) 2.20m. The job including central bearing assembly shaft and MS wheels. Stop wheels and deflector draft tube fabricdated out of MS Sheet with proper prtoraction as per site requirement, including placing in postion with adequiate rotating prime movers 3 phase 440 vlot 50 Hz incuding fly sheel and MS rail on fish plate grouted on top bse of floculator in cement concret. the job includes, providing and installation of 3 phase cubical electrical panel 63 Amp capacity with approprriate roting 3 phse MCCB/OCB and panel of electrical motors incl. connecting with electrical PVC copper cable and on poll system. the jb inc. fabrication and fitting of scrapper blades fabricated out of 50x50x6mm angle and 3mm thick sheet including assembly with rotatry system and central shaft. the job including providing of paddle blades on the central shaft assembly fabricated out of 50x50x6mm angle above the draft tube.
1
160000
160000
... More
Constructing vertical bunds with sloping faces, by boulder
filling (dry, hand packed tightly); including cost of stones but excluding cost of wire-crates
864
2732
2361052.8
... More
12mm Cement plaster of 1 : 6 ( 1 cement : 6 fine sand)
184.6
266
49140.52
... More
Carriage of Cement lead by H.L from source (to be identified by engineer in charge) to site of work/dumping place (To be identified by engineer in charge) including cost for loading and unloading. For an av. distance of 500 mtrs
10.93
269
2947.49
... More
Providing and fixing G.I. pipes complete with G.I. fittings excluding
trenching and refilling etc. (external work) 150 mm dia. nominal bore
10
2256
22569
... More
Structural steel work in single section, fixed with or without connecting
plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
248.42
120
30009.14
... More
Carriage of Bricks from brick klin by Mechanical Transport incl. loading, unloading and staking..for an av. distance of 10 km
Qty = 17062 Nos.
17.06
744
12696.69
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts,
nuts, rubber insertions etc. (the tail pieces if required will be paid
separately). ( 100 mm dia) Class-II
12
4453
53446.2
... More
Providing and fixing of House hold connections including cost of G.i Pipes , fitting , inter connection , brass bib cock, brass ferrule, Tee, Bend, union etc incluing earth work in excavation and refilling as required( complete Job
1032
3018
3114576
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-
Mechanically Treated bars of grade Fe-500D or more.
3180
123
391776
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone
aggregate 40 mm nominal size)
4.86
5202
25286.09
... More
Carriage of Steel lead by H.L from source (to be identified by engineer in charge) to site of work/dumping place (To be identified by engineer in charge) including cost for loading and unloading. For an av. distance of 500 mtrs
10.45
579
6053.48
... More
5th YEAR
1
3144000
3144000
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shades, in skirting, riser of steps, laid with cement basedhigh polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints
66.78
1956
130641.71
... More
Carriage of stone aggregate below 40 mm nominal size. up to a lead of 10 Km by Mechanical Transport incl. loading, unloading and staking.
84.52
279
23584.46
... More
Carrige of Cement and Steel lead up to 10 Km by Mechanical Transport
incl. loading, unloading and staking
57.42
248
14241.88
... More
Providing and laying ceremic wall tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shades, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints.(Size 800 x800 mm)
84.72
1229
104129.35
... More
Carriage of Sand and stone aggregate up to 20mm by Mechanical Transport from source (to be identified by engineer in charge) to site of work/dumping place (To be identified by engineer in charge) including cost for loading and unloading. For an av. distance of 10 Km
735.26
279
205168.07
... More
Provding installation testing commissioning of 100 Amp dust/moisture Proof cubical pannel fitted with 3 phase 100 Amp MCCB l&T make 02 no. and 65 Amp single phase MCCB fr lighting and heating systems. The job also includes no. amp metre 0.100 AE make with CT coips and one number voltmetre AE make 0.500 with selector switches, L&T make and 3 No. indicator lamps Neon type complete Job.
1
80000
80000
... More
Design, fabrication, installation, testing and commissioning of LT control panel for the operation of H.C. induction Motor and Submersible motor of below mentioned pumping machinery. The LT panel shall be dust and vermin proof fabricated out of SWG CR sheet supported on MS angle of Suitable size and provision for fixing it on the ground with the help of foundation Bolts/ wall Mounted as per site requirement. The panels should be sturdy enough for vibration free operation and should be equipped with suitable locking/ sealing arrangement for each box. The structure should be provided with the suitable entry and exit holes for incoming and outgoing cables. The Panel should be given two coats of anti-rust primer and two coats of enamel paint for smooth and even finish.
Incoming Feeder: The incoming feeder for the operation induction/submersible motor must be equipped with a suitable capacity MCCB of Suitable breaking capacity. There must be Al./copper bus bars for all the three phases from the outgoing of the MCCB to all the three contactor. The panel must be fitted with 01 No. Volt 0-500 and 01 no ampere meter of suitable range with proper CT ratio showing voltage and current of all the three phases and RYB phase indicator lamps.
Outgoing Feeders: The outgoing feeders for the operation of induction motor/submersible motor must be fitted with following items:
1 Aiir break contactors. of suitable rating for each motor of reputed make conforming to IS code. as per site requirement. 1.Star-Delta timer for each motor 2. Motor Protection relays having all the features such as Overload, short circuit, under current, phase unbalance, Phase
sequence, Phase Loss, Earth fault, Dry running, Prolonged Starting/ Stalled rotor. The relay is be fitted on the door and it must be accessible by keeping the door of the panel closed.for each
3.Single Phase preventer.for each
4.02 No. indicator lamps for ON and TRIP indication.for each
5.02 No. Push Buttons for ON/OFF.for each
6.10 amp MCBs for protection of the control wiring.
7. Auto start with on delay timer.for each
8. Level controler sensor for auto ON/OFF of motors as per site requirement.
9. Volt meter and Ampere meter for each with proper CT ratio
10. Fault Display Indicator with Proper Layout,
11 Auto Phase Correction
The cabling of the Control panel must be done with the suitable rating multi strand copper cable to withstand the full load of running motors. The internal control wiring should be done with flexible PVC LT cable with proper thimbling at each end. The job also includes the P/F of cables of required size and lenght as per site for the connection of power supply to LT panel of reputed make and conforming to IS standards. The capacity of various LT panel to be installed are mentioned below or as per site requirements. (Note: Panel should be of outdoor type conforming to all standard as per IS code, if Panel have to install out side the pump room and Level controler will be install where Sump/ OHT are with in satation or as per site requirement.) up to 50 HP
6
214300
1285800
... More
Centering and shuttering including strutting, propping etc and removal of form for Suspended floors, roofs, landings, balconies and access
platforms. Lending slabs from Steps
0.68
718
488.38
... More
Providing, stacking and Filling of graded stone agg. (Filter Media) of size 1.5 -4mm, 6-12mm, 12-20mm, 20- 40mm, 40-65mm in five layers (Nallah) including carriage from source to be indentified by Engineer Incharge.
8.64
3000
25920
... More
Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 40 mm nominal bore
15
834
12519
... More
Suspended floors, roofs, landings, balconies and access platforms
186.88
718
134217.22
... More
Foundations, footings, bases of columns etc. for mass concrete.
282.16
286
80796.52
... More
Operation and Maintenace Cost of scheme for 5 years (after completion of Defect Liability period) complete in all repects by way of operation and maintaining all the instruments during warranty period and maintenance period for 5 years with replacement/repair of all damaged or non functioning units /Components incl accessories.
-
-
-
... More
Supply & Fitting of Square Block for fixing of Switches, Sockets
4
189
759.2
... More
Carriage of Sand up to 20mm by Mechanical Transport from source (to be identified by engineer in charge) to site of work/dumping place (To be identified by engineer in charge) including cost for loading and unloading. For an av. distance of 10 Km
12.85
279
3585.66
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal
size)
8.65
5202
45005.09
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift
upto 1.5 m. Back filling around sump
123.82
218
27042.29
... More
Carriage (Head Load) for Bricks up to a lead of 500 m by Manual Labour
including loading, unloading and stacking.
4.46
1108
4944.45
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-
Mechanically Treated bars of grade Fe-500D or more. qty of steel for raft ,walls and dome @100 Kg /Cun
2943
123
362577.6
... More
Electrification of the pump room by way of providing and fitting main control unit, 03 No. Lighting points inside the pump room along with 9 watt LED bulbs and 03 Nos. outside the pump room with Providing and fitting of 50 Watt LED lights and 1 no fan. The job also includes Providing and fitting of 02 Nos. 06 amp sockets and 02 Nos. 16 amp sockets and switches inside the pump room. Providing and fitting of main control unit with MCBs. along with allied works (all material should be of reputed make conforming to IS standard) The job includes lying of cable and batten of appropriate size required to cover all the points. The job includes proper thimbling and providing insulation using insulation tape on each end. The job includes
the cost of material, fixation, labour and transport charges
4
25000
100000
... More
Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over the specified cement content used is payable/ recoverable separately. Providing M-30 grade concrete instead of M-25 grade BMC/RMC Qty same as item no 3 and 4 (20.47+26.58=47.05 Cum)
94.1
98
9297.08
... More
Extra for arches, domes, vaults exceeding 6 m span Qty as per item no -13 = 65.81 Sqm
131.62
1118
147263.04
... More
Carrige of Cement and Steel lead up to 10 Km by Mechanical Transport incl.
loading, unloading and staking
46.88
248
11627.65
... More
4th YEAR
1
2620000
2620000
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
184.6
164
30385.16
... More
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc.complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass
panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)
7.76
1061
8240.73
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
235.12
628
147878.72
... More
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement
mortar 1:6 ( 1 cement : 6 coarse sand)
9.3
7571
70415.42
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
4
262
1051.6
... More
Supply, Installation, Testing & Commissioning Aesthetically designed |higher wattage LED Bulb for B22 lamp base, Input Voltage: AC 220-240V, 50/60Hz, Driver Type: Integral, Lumen output 1060 Im, (12 Watt LED Bulb)
36
113
4099.68
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and
finishing the outlet complete.
1
262
262.9
... More
Provind and fitting of Automated bleaching doser pum along with all necessary acesseries inc; Provision for constant dozing of bleaching along with required arrangement i.e motor, switches, starter/Autmatic panel etc. (complete Job) along with stand by unit.
1
50000
50000
... More
Taking out existing CC interlocking paver blocks from footpath/ central
verge, including removal of rubbish etc., disposal of unserviceable
material to the dumping ground, for which payment shall be made
separately and stacking of serviceable material within 50 meter lead as per
direction of Engineer-in-Charge.
5328
93
497635.2
... More
Providing and fitting of 3-Core flat submersible copper cable conforming to IS: 694 (Part 1st) – 1964 & IS: 694 (Part 2nd) - 1964 for the operation of above mentioned submersible Pumping Unit and length as per site requirement. The
cable connections terminal shall be fitted with copper thimbles of required size. 6 sq. mm
340
670
227800
... More
Providing and laying in position machine batched and machine mixed design mix M- 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum.
Excess or less cement used as per design mix is content considered payable or recoverable separately. All works upto plinth level
11.6
8021
93044.76
... More
Carriage (Head Load) for Sand, stone aggregate below 40 mm nominal size. up to a lead of 500 m by Manual Labour including loading,
unloading and stacking.
108.45
593
64406.29
... More
From G.L. to 200 meters below GL
200
19500
3900000
... More
2nd YEAR
1
1572000
1572000
... More
Extra for shuttering in circular works (20%) Qty same as item no-14 (A+B) = 41.00 Sqm
41
52
2150.04
... More
Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth,
sides of foundation etc. complete.
5.83
276
1612.58
... More
150mm
30
2295
68869.5
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as
required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar
works.
688.6
181
125049.76
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level 1:3:6
stone aggregate 20 mm nominal size) Around Sump tank
6.34
5733
36351.02
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand
: 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed
concrete etc. complete as per standard design : Inside dimensions 455 x 610 mm and 45 cm
deep for single pipe line
8
6341
50731.6
... More
Carriage of stone aggregate below 40 mm nominal size. up to a lead of 10
Km by Mechanical Transport incl. loading, unloading and staking.
215.2
279
60049.41
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. For sides of GSR
2.72
218
594.05
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level with 1:4:8 (1 cement : 4 Sand : graded stone agg. upto 40mm niminal size)
532.8
5202
2772105.12
... More
Ist YEAR
1
1048000
1048000
... More
Construction of intake structure Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: Ordinary Rock
419.38
493
206964.03
... More
Centering and shuttering including strutting, propping etc. and removal of
form for:Columns, pillars, piers, abutments, posts and struts.
272.4
742
202270.62
... More
Extra for shuttering in circular work (20% of respective centering and
Shuttering items) Qty same as item no- 7 = (5.97 Sqm)
11.94
57
683.8
... More
Carriage of stone aggregate below 40 mm nominal size. up to a lead of 10 Km by Mechanical Transport incl. loading, unloading and staking.
55.89
279
15595.55
... More
Supply & Fitting of Pandent Holders for fixing of LED Blubs
20
47
949
... More
Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement
mortar 1:4 ( 1 cement : 4 coarse sand) Parapet Wall
24.56
947
23264.46
... More
Design, fabrication, installation, testing and commissioning of LT control panel for the operation of H.C. induction Motor and Submersible motor of below mentioned pumping machinery. The LT panel shall be dust and vermin proof fabricated out of SWG CR sheet supported on MS angle of Suitable size and provision for fixing it on the ground with the help of foundation Bolts/ wall Mounted as per site requirement. The panels should be sturdy enough for vibration free operation and should be equipped with suitable locking/ sealing arrangement for each box. The structure should be provided with the suitable entry and exit holes for incoming and outgoing cables. The Panel should be given two coats of anti-rust primer and two coats of enamel paint for smooth and even finish.
Incoming Feeder: The incoming feeder for the operation induction/submersible motor must be equipped with a suitable capacity MCCB of Suitable breaking capacity. There must be Al./copper bus bars for all the three phases from the outgoing of the MCCB to all the three contactor. The panel must be fitted with 01 No. Volt 0-500 and 01 no ampere meter of suitable range with proper CT ratio showing voltage and current of all the three phases and RYB phase indicator lamps.
Outgoing Feeders: The outgoing feeders for the operation of induction motor/submersible motor must be fitted with following items:
1 Aiir break contactors. of suitable rating for each motor of reputed make conforming to IS code. as per site requirement. 1.Star-Delta timer for each motor 2. Motor Protection relays having all the features such as Overload, short circuit, under current, phase unbalance, Phase
sequence, Phase Loss, Earth fault, Dry running, Prolonged Starting/ Stalled rotor. The relay is be fitted on the door and it must be accessible by keeping the door of the panel closed.for each
3.Single Phase preventer.for each
4.02 No. indicator lamps for ON and TRIP indication.for each
5.02 No. Push Buttons for ON/OFF.for each
6.10 amp MCBs for protection of the control wiring.
7. Auto start with on delay timer.for each
8. Level controler sensor for auto ON/OFF of motors as per site requirement.
9. Volt meter and Ampere meter for each with proper CT ratio
10. Fault Display Indicator with Proper Layout,
11 Auto Phase Correction
The cabling of the Control panel must be done with the suitable rating multi strand copper cable to withstand the full load of running motors. The internal control wiring should be done with flexible PVC LT cable with proper thimbling at each end. The job also includes the P/F of cables of required size and lenght as per site for the connection of power supply to LT panel of reputed make and conforming to IS standards. The capacity of various LT panel to be installed are mentioned below or as per site requirements. (Note: Panel should be of outdoor type conforming to all standard as per IS code, if Panel have to install out side the pump room and Level controler will be install where Sump/ OHT are with in satation or as per site requirement.) up to 70 HP
2
275520
551040
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements