Power Development Department Tender

... More
The PDD has issued a formal invitation for competitive bids for the Power Development Department project, for Stabilization And Improvement Of 33kv Lines Of Various Divisions Of Kpdcl (pddss2627100229) By Way Of Stablization Of Kralpora Line From Upper Nechiyan Bridge Onwards in Kupwara, Jammu & Kashmir, with an estimated contract value of Rs. 51,00,000. The bid opening date for this tender is 03-10-2026 and the last date for bid submission is 16-11-2026. Interested bidders for Power Development Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Power Development Department - PDD Tender - JK Tender

Opening Date3 Oct 2026
Closing Date16 Nov 2026
Tender Amount₹ 51,00,000 
Notes
Download

Costs

Description

Stabilization And Improvement Of 33kv Lines Of Various Divisions Of Kpdcl (pddss2627100229) By Way Of Stablization Of Kralpora Line From Upper Nechiyan Bridge Onwards

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of PG/T Clamps suitable for 100 Sqmm ACSR as per approved drawings/standards

70

1

-

... More
Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of 33kV Polymeric composite Pin Insulator 36kV, 10kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm (reputed make)as per approved drawings/standards

180

1

-

... More
Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of 33kV Polymeric composite Disc Insulator 36kV,min failing load 70kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm with disc fitting (reputed make) as per approved drawings/standards

75

1

-

... More
Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of Galvinized Nuts and Bolts as per approved drawings/standards

100

1

-

... More
Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of Earthing Complete by GI Pipe 40 mm 3 mtr long through GI Strip 25x3mm as per approved drawings/standards

70

1

-

... More
Supply & Laying of Cement bottoming for 11 Mtr ST Pole in 1:2:4 mix as per Standards 0.66 cum / pole including the Loading/Carriage/Unloading of required material.

70

1

-

... More
Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of Aluminium Jointing Sleeves as per approved drawings/standards

10

1

-

... More
Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2No.), anchor plate (300x 300 x 8 mm), nut-bolts, 2No.turnbuckles, 1.8m long,20 mm diameter solid GS stay rod & 7/4 mm dia GI stranded wire complete as per approved drawings/standards

9

1

-

... More
Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of 33 kV Isolator with Earthing Blade (36kV,800A, Outdoor,3 poles, 25 kA) as per approved drawings/standards (1 Set=03 Poles)

2

2

-

... More
Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of Guard netting as per approved drawings/standards

5

1

-

... More
Supply,Testing,Loading,Carriage,Unloading and fixing of Danger Plates with Clamps as per approved drawings/standards

70

1

-

... More
Supply,Testing,Loading,Carriage,Unloading and fixing of Anti-Climbing Device with Clamps as per approved drawings/standards

70

1

-

... More
Providing & Painting of Poles with one coat of Red Oxide and two coats of aluminium paint and as per approved drawings/standards

70

1

-

... More
Dismantlling of existing ST Poles/ PCC poles/wooden poles with Pin Insulators, Disc Insulators, Hardware fittings etc. including loading at site, carriage upto Divisional Stores Amargarh and unloading including all charges

40

2

-

... More
Dismantlling of existing Conductor including loading at site, carriage upto Divisional Stores Amargarh and unloading including all charges

3

1

-

... More
CONTENGENCIES /T&P

-

-

-

... More
Hiring of Vehicle (Scorpio/Bolero/Innova/Tavera or equivalent) to be used by the Engineer Incharge for supervision of the project including Fuel/Toll Tax/ Driver/ any other maintenace charges of the vehicle. The max. Kms to be driven per day is 120 Km. In case the vehicle is utilized less than 120 km on any given day, the payment shall be subject to deduction on account of actual fuel savings. Such deduction shall be worked out proportionately based on the approved mileage (km per litre) of the vehicle and the prevailing fuel rate.

10

3000

-

... More
Supply of heavy-duty petrol engine–operated power saw suitable for cutting wood complete with standard accessories, safety guards, robust base, and precision cutting arrangement, equipped with petrol engine of not less than 52 CC capacity, with 18–20 inch guide bar and chain, of approved make and quality, as per directions of the Engineer-in-Charge

1

10000

-

... More
Supply of ISI-marked Safety Helmet made of high-quality, impact-resistant HDPE/ABS material, equipped with adjustable headband, chin strap, ventilation system, and sweat-absorbent inner lining, conforming to IS:2925 standards, of approved make and colour, as per directions of the Engineer-in-Charge

3

800

-

... More
Supply of ISI-marked Safety Belt / Full Body Harness made of high-strength polyester webbing with adjustable shoulder and thigh straps, equipped with double lanyard, shock absorber, and forged steel snap hooks, conforming to IS:3521 standards, of approved make and quality, as per directions of the Engineer-in-Charge

3

1000

-

... More
Supply of ISI-marked industrial Safety Shoes made of genuine leather with steel toe cap, oil/acid/slip resistant PU sole, shock-absorbing heel, and padded ankle support, conforming to IS:15298 (Part 2) standards, of approved make, size, and quality, as per directions of the Engineer-in-Charge

3

1300

-

... More
Supply of Electrical Rubber Insulating Gloves suitable for working up to 33 kV, made of high-dielectric natural rubber, seamless, ergonomically designed, conforming to IS:4770 / IEC 60903 standards, duly tested and certified, complete with manufacturer’s test certificate, of approved make and quality, as per directions of the Engineer-in-Charge.

3

1500

-

... More
Supply of Earthing Discharge Rod suitable for safely discharging high-voltage lines/equipment up to 33 kV, made of high-quality epoxy/fiberglass insulating rod with metallic clamp, complete with 16 sqmm multi-strand copper earthing cable of adequate length and earthing terminal, conforming to relevant IS/IEC standards, complete with carrying case, of approved make and quality, as per directions of the Engineer-in-Charge

3

5000

-

... More
Supply of High Voltage Detector suitable for outdoor/indoor use, capable of detecting multiple voltage levels ranging from 3.3 kV to 33 kV (or higher as specified), provided with clear audible and visual indication, telescopic epoxy/fiberglass insulating rod, battery-operated electronic circuit, and complete with carrying case, conforming to relevant IS/IEC standards, of approved make and quality, as per directions of the Engineer-in-Charge

3

13000

-

... More
Supply of waterproof Rain Coat made of high-quality PVC/Nylon fabric with heat-sealed seams, full sleeves, adjustable hood with drawstring, front zipper with flap, and matching waterproof trousers, complete with carrying pouch, of approved make, size, and quality, as per directions of the Engineer-in-Charge.

3

800

-

... More
Supply of heavy-duty Aluminium Extension Ladder of size 2 × 20 feet (two-section), fabricated from high-tensile aluminium ‘C’ section, with minimum 3 mm wall thickness, complete with rope and pulley arrangement for smooth extension, anti-skid steps, rubber shoes at the base, and safety locking arrangement, of approved make and quality, as per directions of the Engineer-in-Charge

1

16000

-

... More
Supply, installation, testing and commissioning of A4 Monochrome LaserJet Printer, minimum 30 PPM, 1200 × 1200 dpi, automatic duplex printing, USB/Ethernet connectivity, complete with all standard accessories and one-year warranty (HP/ Canon/ Epson or equivalent) (to be Installed at Divisional Office)

1

32000

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.