Jammu And Kashmir State Sports Council Tender
... More
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Jammu And Kashmir State Sports Council Tender
Civil And Construction
Building Construction
Eprocure
Opening Date14 Jan 2025
Closing DateCancelled
Tender Amount₹ 1,98,10,000
Costs
EMD
₹ 3,96,200Document Cost
₹ 2,600Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_SPORT_270150_1Tender No
enit 43 of 204-25 dated 09.1.2025Tender Authority
Jammu And Kashmir State Sports Council ViewPurchaser Address
-Website
http://http://jksportscouncil.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Installation testing and comissioning of 2X2 Recessed luminaire with LED (Light Emitting Diode) maximum system power: 36 W, minimum Luminous flux of luminaire 100 Lm/w, Colour temperature of 0 K, Neutral white, CRI 80, R90, THD5%, P.F0.95, Driver Efficiency88%, SDCM3, 230 V constant current driver, 70% of luminous flux after 50,000 operating hours; Energy efficient LEDs, Direct light emission, 1.4 mm thick extruded aluminium profile with Polyester powder white coloured coat applied over a 5- stage pre-treatment, Protruded Prismatic diffuser for glare-free uniform illumination, UGR16, ZHLS (ZERO HALOGEN LOW SMOKE) internal wiring, Electronic control gear, Protection class I, IP 40
50
2500
125000
... More
Providing and fixing 400 Amp 50kA FP MCCB and breaking capacity with thermomagnetic release and terminal spreader in existing cubical panel board including drilling holes and making connections etc as required.
1
42665
42665
... More
Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)
22
508
11191.4
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. TV antenna socket outlet
6
119
714
... More
Supply installation testing & commissioning of 2 tonne capacity hot & cold split Air conditioning unit with all necessary fitting and 5 kva automatic stablizer and AC switch complete. (Make - havells/voltas or eq make)
8
65000
520000
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
4000
8
35000
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry
70.2
485
34054.02
... More
Providing, Fixing,testing and commissioning of C.P. brass twin coat hook with PVC rawl plug & C.P. brass screw complete as required.
1
448
448
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. For Seating steps frame work
3801.14
120
459177.71
... More
Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. b) Bend 87.5° 75 mm
10
114
1140.5
... More
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) including carriage.
244.08
7571
1848063.92
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.
6
412
2472.6
... More
Providing and fixing CP Brass Towel Ring etc. complete as per direction of Engineer-in-Charge.
5
1171
5855
... More
Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. All kinds of soil : 50 meter beyond 1 m from cutting edge
5
2516
12584.25
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510mm bowl depth 200mm
1
4380
4380.5
... More
Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. a) Single tee with door 75x75x75 mm
20
176
3529
... More
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 38mm of 83 mm length and 77 mm breadth weighing not less than 60gms
6
188
1129.5
... More
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required
2
3494
6988
... More
Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge With fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles.
179
1989
356129.45
... More
Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. a) Bend 87.5° 110 mm
20
183
3661
... More
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 300x16 mm
3
298
896.25
... More
Providing, Fixing,testing and commissioning of Corner Glass Shelf with Bracket of approved quality.
1
1132
1132
... More
Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.
1
108572
108572
... More
Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete :
13
938
12206.35
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 3 Module (100mmX75mm)
4
267
1068
... More
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
3
931
2794.05
... More
Installation testing and comissioning of Self contained single sided exit sign green in color for wall / ceiling / pendant cantilever mounting with 3W LED with maintenance free battery with backup 2-3 hours duration ,connection testing etc as reqd. Make Plantion or equivalent as approved by consultant.
4
5420
21680
... More
Providing and fixing gun metal non-return valve of approved quality (screwed end) 25 mm nominal bore
2
640
1281.2
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 6 Module (200mmX75mm)
2
333
666
... More
Removing Existing Water Tank, GI Fitting and GI Pipes at 1st floor and refixing the same at second flooor as per the direction of Engineer Inchrage. The work include cutting and refixing of GI pipes with all necessary fitting as required except extra GI Pipe required to make the system functional which shall be paid seprately in running metre lenght.
1
20000
20000
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
20
463
9260
... More
Wiring for light point / fan point / exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
80
717
57360
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Shelves (cast-in-situ)
5
718
3591
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick
1509.78
181
273345.67
... More
Supplying and fixing following rating, double pole, 240 V,isolator in the existing MCB DB complete with connections, testing and commissioning etc as required 40A
3
339
1017
... More
Providing 100% Bright Nylon Cut Pile, Digital Printed Carpet/Tuted carpet. The rate shall include Pile height of 8mm ( +_ 1mm . Total height 11 mm Stich /10 cm54 - 56, pile weight 1200 GSM Secondary Backing PP Mesh Gauge 1/8 CUT Pile Latex Natural Rubber Colour Fastness to Light test Method AATCC 16 (20 AFU) ≥ 4.0 at 80 Hours, Static Electricity Test method ASTM D 5252 4. Flammability (Radiant Panel) NSF /ANSI 140 - GOLD Test Method ASTM E 648 0.45 (Class I) P Warranty of 7 years will be applicable. The laying work should be carried out by the authorized installer of the company in India. Manufacturer Should have LEED Gold Rating Certification. Carpet Make WelSpun/ Milikhen/ Shaw/ Standard. The Product Should be Made in India/ European Country only
2077
350
726950
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood
2.19
142085
311167.57
... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
7
6929
48508.95
... More
MCB'S S/F 'C' series, SP MCB: Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 'C' curve, miniature circuit breaker suitable for inductive of following poles in the existing MCB DB complete with connections, testing and commissioning etc. Single pole
45
199
8955
... More
Providing, Fixing,testing and commissioning of CP brass angle valve with 450 mm flexible coupling pipe for connection with sanitary fixture with CP wall flange, Nut and Washer etc. complete as required.
43
582
25041.05
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Stairs (excluding landings) except spiral staircases.
57.9
851
49281.59
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured)
32.22
401
12933.11
... More
Providing and fixing of 2 No Staggered Layers 12 mm Thick HDMR Board of GYPTECH /ANUTONE /ARMSTRONG fixed to Second Class Teak wood frame of size 45 x 25 mm at 600 mm c/c both ways. The Second class Teak wood frame to be supported on 150 x 150 x 5 mm neoprene pads & held in position by 35 x 35 x5 mm angle cleats. The Wood Frame work to be filled with 50 mm thick thermal bonded polyster wadding of 1000 GSm (Make Gyptech / Anutone / Armstrong) held on the bottom of the wodden frame work. then 12 mm thick AC 5 wooden flooring of Armstrong/ BVG/ Vists / Pergo) Should be fixed on the Staggered layer of 11 mm thick HDMR board with required foam. Beading and Skirting and antiweeding complete in all respect. The work shall be executed as per drawing specifications & instructions of Engineer - in- Charge. (only floor plan area without sides/skirting shall be taken for payments)
36
8078
290808
... More
Supply, installation, testing and commissioning of ABC Powder Type (Stored Pressure) Fire Extinguisher 4 Kg. Capacity ISI Mark IS:15683 operating temperature (+5)°C to (+55)°C for Class 2A & 21B type of fire filled with MAP Powder Complete in all respect.
3
7450
22350
... More
Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in oundations and plinth including curing in : 1:4 ( 1 cement : 4 coarse sand) including carriage.
27.92
947
26447.22
... More
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes a) 110 mm diameter
150
366
54945
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2x4 sq.mm + 1x4 sq.mm earth wire
700
200
140000
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work On steel / wood work
354.35
131
46721.05
... More
P/F M.V. danger notice plate: Providing and fixing M.V. danger noice plate of 200 mm x 150 mm, made of mild steel, at least 2mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on front side as required.
5
226
1130
... More
Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work
10
381
3817
... More
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 250x16 mm
7
251
1763.65
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
21
495
10395
... More
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.Two Loop Panel.
1
238907
238907
... More
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100mm
20
60
1200
... More
Installation testing and comissioning of linear surface wall mounted 36 watt light luminaire with Luminous efficiency of luminaire 100 lm/W; color rendering index Ra 80; minimum system lumen output of 4000 lumens and maximum system wattage of 12W; Dimension :- 1200 mm Body of extruded aluminium profile and polycarbonate cover.
25
650
16250
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 5/6 A switch
10
85
850
... More
Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete
10
471
4716.5
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Data socket outlet
10
119
1190
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2x2.5 sq.mm + 1x2.5sq.mm earth wire
310
167
51770
... More
Supplying, installation , testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.
30
2846
85380
... More
Providing and laying 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) including carriage.
453.98
241
109522.68
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 15mm nominal outer dia pipes.
50
419
20987.5
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
156.46
1229
192304.99
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore.
6
569
3416.7
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.
187.42
718
134605.04
... More
Extra for providing vision panel not exceeding 0.1 sqm in all types of flush doors (Cost of glass excluded) (overall area of door shutter to be measured)
32.22
194
6250.68
... More
Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 150 mm width X 50 mm depth X 1.6 mm thickness
30
531
15930
... More
Supply, installation, testing and commissioning of fire extinguisher of carbon dioxide type consisting of brand new high pressure steel cylinder bearing IS: 7285 mark and having the approval of controller of explosives Nagpur, wheel type valve bearing IS:3224 mark internal discharge tube, 1 meter long high pressure discharge hose, non conducting horn, suspension bracket, fully charged bearing IS: making fixed to wall as directed conforming IS : 15683:2006 ( 4.5 ltr capacity)
3
9650
28950
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve charge. All works above plinth level upto floor V level including carriage.
168.59
9412
1586777.51
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 20mm nominal outer dia pipes.
100
492
49235
... More
Shifting of mobile tower with asseroies towards pomp room as per direction incharge for foundation work of column.
1
25000
25000
... More
Installation, testing and commissioning of 200 mm sweep exhaust fan with robust motor, gravity shutters with speed rating of 1350 revolution per minute complete with all accessories etc. directly on ventilator , including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
6
2000
12000
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) ) including carriage.
17.7
5202
92091.33
... More
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
(For fire alarm loop components)
400
328
131200
... More
Installation testing and comissioning of LED Cove lights with necessary driver for LED cove light with lamp life of 35000 hours, colour temperature of 3000k and CRI80
100
400
40000
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts
254.98
742
189335.4
... More
Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour
43
114
4936.4
... More
Providing and fixing wall hung gel dispenser of desired pattern including all accessories as per direction of Engineer-in-charge.
5
1132
5660
... More
Melamine polishing on wood work (one or more coats) On wood work
27.38
108
2969.36
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
20
8
160
... More
Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab over 0.5 sqm) 18mm
3.54
2994
10600.88
... More
Providing and Fixing in position storage type hot water electrical heaters with copper container, insulation, and stove-enamelled M.S jacket, thermostatically controlled immersion heater, with pilot lamp, 15/20mm dia inlet with non-return valve and 15/20mm dia outlet including making connections complete in all respect. (wall mounted with suitable M.S bolts and nuts) Capacity 25 litres
4
10014
40056
... More
Providing and fixing ISI marked flush 35 mm door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws
32.22
3234
104205.92
... More
Providing and fixing FLOOR-MOUNTED cubicals for WC of size 900 x 1550 x 2065 mm made of 12 mm thick HPL compacted board with door of minimum 610 mm wide. The bottom gap shall be 100 mm and pilaster width shall be 400 mm. The cubical shall be equipped with Stainless Steel Top Rail Arrangement and all accessories like U-channel, F- Channel, Spring loaded butt hinges, Thumb turn with occupancy indicator knob, door stapper shall be SS made and specification as approved / specified in company product cataloug. The product should be impact, scratch, Fire, water abrasion, cigarette burn, chemical, termite resistant. The work shall be carried out through persons authorized by the company and shall be completed as per direction of engineer Incharge and product shall be of Greenlam/ Merino / Megha System or equivalent make.
5
30000
150000
... More
Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete
1
663
663.8
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc Internal / External work-Exposed on wall .:25 mm dia. nominal bore medium
140
529
74158
... More
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
193.96
96
18620.16
... More
Extra for half Brick masonry in superstructure above plinth level upto floor V level.
27.93
159
4459.03
... More
Providing and fixing chromium plated brass handles with necessary screws etc. complete : 125 mm minimum
34
266
9045.7
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.
446.18
577
257691.26
... More
Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately).
117
1810
211875.3
... More
Installation testing and comissioning of linear surface wall mounted 20 watt Mirror light luminaire with Luminous efficiency of luminaire 100 lm/W; color rendering index Ra 80; minimum system lumen output of 2000 lumens and maximum system wattage of 12W; Dimension :- 595mm Body of extruded aluminium profile and polycarbonate cover.
5
550
2750
... More
Providing and fixing Auto tip up push back type Auditorium Chairs made up of Moulded PU foam with density of 45±5 density and with 100% polyster 350 gram PREMIUM Response Fabric, ABS forming tray for seat back cover with different color shade, Fabric upholster armrest with PPCP cup holder, Row plate indicator on the aisle side chair, supported on Heavy 2 leggedTubular steel structure, Metal frame for Seat back frame with Side light assembly arrangement on the aisle side chair for pathway, COMPLETE INCLUDING FITTINGS WITH WARRENTY OF 5 YEARS
98
7500
735000
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 3 pin 5/6 A socket outlet
5
111
555
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 6 pin 15/16 A socket outlet
10
175
1750
... More
Supply and fixing of UTP 4 Pair Cat 6 LAN cable in existing surface / recessed steel/PVC conduit conduit 2 run of cable
450
82
36900
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe 32 mm dia
5
128
640.25
... More
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 300x10 mm
34
124
4221.1
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 15/16 A switch
10
132
1320
... More
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
2
3859
7718
... More
Providing, Fixing,testing and commissioning of white vitreous China wall mounting type water closet including Concealed Cistern of 2 / 4 liter capacity (adjustable to 3/6 liters with CP bolts, nuts, CI chair hanging arrangements, bakelite seat & cover , flush plate , stop cock with CP hinges & rubber buffers, CP brass screw, washer , w.c. connector with all accessories with Rubber Lip / Buffer and side gap filled with silicon sealant wherever required. including cutting, making good the walls, floors, slab wherever required as per direction of Engineer-Incharge
6
14487
86923.2
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
5
1595
7975.5
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete
6.61
286
1892.77
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick With 5.0 mm thick glass pane (weighing not less than 12.50 kg/sqm)
18.9
2139
40445.06
... More
Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms
10
712
7126
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet
5
119
595
... More
Installation testing and comissioning of recessed LED Downlighter in compliance of relevant standard & power consumption not more than 15W and lumen Output not less than 1350 lumen with luminous efficiency of 90 lm/W & CRI 80, Power Factor ≥0.90, THD ≤10% & CCT 5700K. The heat sink of the fixture is pressure die cast aluminum for ceiling recessed applications with PS Diffuser. The fixture has an operating voltage range 150-270V AC 50 Hz ,Constant Current ,withstand 300Volt input for continuous operation & driver designed to withstand casing temp. 85 degree C & 85% Driver efficiency. 15 cm
60
1600
96000
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
8846.55
156
1388466.02
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 8 Module (125mmX125mm)
2
338
676
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimetre channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part-I : 2011 (Board with BIS certification marks)
210
1420
298389
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve charge. All works upto plinth level including carriage.
4.94
8021
39624.23
... More
Providing and fixing tank Nipple 25 mm nominal bore
4
500
2000
... More
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35 mm Second class deodar wood
13.8
4412
60891.81
... More
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.
(a) 15 mm nominal dia
1
6805
6805.8
... More
Supplying, installation, testing & commissioning of addressable fire control module complete as required.
2
2990
5980
... More
Providing and fixing aluminum casement stays, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
14
68
956.2
... More
Providing and fixing Zebra Blinds made with Green Guard Certificated ROHS Fabric, Anti-Wrinkle and Dust Proof, 250 GSM. Rolling Mechanism & material with Aluminum alloy weight 3.6 Kgs/ 15’ Length, Plastic gear set with steel coil inside, Polyester operated chain with drop 46”, Aluminum bottom rod of weight 3.2 kgs/15’ length, Support bracket of iron alloy including all fitings complete Job as per specification of engineer incharge.
324
250
81000
... More
Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness
10
621
6210
... More
Finishing walls with 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
1509.78
157
237488.39
... More
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
243.08
1455
353839.4
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore.
4
524
2099.4
... More
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc as required 63A
3
385
1155
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm
241.91
1448
350503.4
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
10
401
4010
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. (TATA TISCON, SAIL Or Equivalent)
27100
123
3338720
... More
Providing and fixing CP Brass toilet paper holder to the wall of approved design and make as per direction of Engineer-in-charge.
6
1011
6070.5
... More
Providing and fixing CP brass health faucet with tube and hook etc. complete as per direction of Engineer-in-charge
6
1303
7818
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces
1.98
5493
10877.92
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams.
20
68
1375
... More
Supplying and fixing following rating, double pole (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30mA in the existing MCB DB complete with connections, testing and commissioning etc as required 63A
3
2640
7920
... More
Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. b) Single tee with door 110x110x110 mm
20
289
5798
... More
Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete
1
1204
1204.5
... More
Supplying, installation, testing & commissioning of Addressable Beam detector with short circuit isoaltor (inbuilt/external) complete with emitter & receiver including connections with remote test features complete as required.
2
74937
149874
... More
Providing and fixing Evas boarding with 4 mm THICK ACP sheet with all necessary fittings
144.32
150
21648
... More
Providing and fixing S.S.Towel Rack 600mm Long Without Lower Hangers but with 3 hooks, of approved quality.
1
2600
2600
... More
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown
44.25
1107
49013.51
... More
Providing and laying 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) including carriage.
2500
266
665500
... More
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :100x10 mm
40
63
2534
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surfacel recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/lsolator) 8 way, Double door
4
1760
7040
... More
Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard manufactured from natural gypsum as per IS 2095 part-I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.
37.8
2006
75840.03
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single Hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-
(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
5
4841
24206
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
6
218
1310.4
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutmnts, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:5:10 (1 cement : 5 coarse sand : 10 graded brick aggregate 40 mm nominal size ) including carriage.
25
4469
111731.25
... More
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.
(i) Single socketed pipes b) 75 mm diameter
40
226
9046
... More
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
1862.32
138
257372.62
... More
Providing and fixing Heavy class SS grating with Cockroach proof SS strainer of approved design including setting in floor with cement motor to match with floor finish as per complete as per direction of Engineer-in-charge.For FT & FD of Size 100 mm x 100 mm
12
515
6180
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2x6 sq.mm + 1x6 sq.mm earth wire
80
249
19920
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS:2645 and approved by Engineer - in- charge over the RCC slab including adjoining walls up to 300 mm height including cleaning the surface before treatment. Laying cement concrete using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer - in- charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to IS2645 and approved by Engineer - in- charge to required slope and treating similarly the adjoining walls up to 300 mm height including rounding of junctions of walls and slabs.
After two days of proper curing applying a second coat of cement slurry admixed with proprietary water proofing compound conforming to IS:2645 and approved by Engineer - in- charge .
Finishing the surface with 20 mm thick joint less cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer - in- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making of 300x300 mm square 3mm deep. The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge. a) With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
223
1404
313236.95
... More
Supply and laying of PVC insulated and PVC Shetted/ XLPE Aluminium Power Cable of 1.1KV grade of following size on surface / direct in ground including excavation and cushoning protective covering and refilling of Trench etc as required. 120 Sq. mm 3.5 core with all necessary fittings for making connection of cubical panel with transformer.
80
1100
88000
... More
Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter .(600 mm over all girth
44
1174
51660.4
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required Telephone socket outlet
5
119
595
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-Charge and finished smooth. 16/18 mm Granite Stone of approved shade
2
3698
7396.8
... More
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete
17
266
4527.1
... More
Telephone wiring in existing conduit: Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as required. (2 pair) CONTROL ROOM TO STAGE
145
20
2900
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
1
869
869.65
... More
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : 50 meter beyond 1 m from cutting edge
12
479
5751.6
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) including carriage.
6
7275
43651.5
... More
Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm
387.64
268
104061.96
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements