Jammu And Kashmir State Sports Council Tender

FIS Approved Timing System Consisting of Below items: Timer Crystal frequency: TCXO, +/-1 ppm (+/-0.00036 s/h) Time resolution: 1/10,000 s Timing: 9 Timing channels, external extension possible Program memory: Flash memory with 16 Mbit Data memory: RAM with 4 Mbit (about 30,000 times) Display: Monochrome LCD graphic display with backlight, 128 x 64 pixels, extended Temperature range. KeyPad: Silicone keypad, 26 keys Radio module WTN: built-in 2.4 GHz radio, 15 adjustable frequencies and power output from 10 to 100 MW, 5 ming channels, for distances up to 350 m Power supply: Internal: NIMH power pack 7.2 V/2 Ah or 6 x AA alkaline (only for Timy3 W) external: power supply PS12A, 12 V battery or 8-22 VDC Power consumption: without printer about 100 hours, with printer about 47 hours Charging Time: approx. 14 hours Temperature range: -20°C to +60°C Weight (no battery): Timy3 W: 450 g Timy3 WP: 650 g Teledata Transmiter Long range (4.5 km@500mW free LOS) radio system to transmit impulses or data. The system consists of 2 devices. transmitter (Tx) and receiver (Rx) and operates in the 433 MH ISM band. 139 adjustable frequencies (433.0625-434.7875MHz) self-calibrating TCXO crystal, Integrated GPS receiver, 2 timing channels (banana sockets) Memory: 6,900 times, Splash-proof membrane keyboard with 12 keys Operating temperature: -20 to +65°C, Transmission power: Standard 10mW; adjustable 5- 500mW, Transmission range: up to 1.5km@10mW and up to 4.5 km@500mW free LOS FIS homologated timing system D Line Display Board Digit Size: 150 mm Dimensions: 956 x 250 x 60 mm Weight: 6 kg Number Of Digits: 6 Number Of Sides: 1 Environment: Outdoor Power Consumption: 10.2 W Power Supply: 90-230 V AC/12 V DC Readability: 75 m Operating temperature: -20°C to +60°C (-4 F to +140 F) Black aluminum case with red Plexiglas front STSnM2S manual Start gate Manual reset of start wand 2 contacts integrated speech amplifier rigid start wand should confirm with FIS regulations Dimensions: 170 x 95 x 65 mm Weight: 790 grams Photocells PR1aW The PR1aW photocell should have an integrated radio module (2.4 GHz) The impulse transmission should be carried out by radio and is compable with the WTN series. 15 different radio-teams and 5 different impulse channels can be set. If required, the PR1aW can also be connected to a ming device via cable integrated radio module for wireless impulse-transmission. impulse transmission also possible by cable up to 38 hours of operating range with battery Range: 0.5 to over 25 meters (with reflector), 0 to over 150 meters (transmier and receiver) Impulse length: 20 to 2,000 ms can be set Output: NPN transistor, open collector, acve low Dimensions: approx. 118 x 87 x 44mm Weight: approx. 0.3 kg Operang me: approx. 38 hours (PR1aW) Cable Reel Cable Length:300 m Cable Plugs: Banana F, Banana M Complete Timing System should be FIS approved