Irrigation And Flood Control Department Tender
... More
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Irrigation And Flood Control Department - IFC Tender
Irrigation Work
Eprocure
Opening Date22 May 2025
Closing Date13 Jun 2025
Tender Amount₹ 39,18,80,000
Technical
Technical
Financial
Additional Eligibility
Bid Capacity
... View More
The formula for bid capacity is: Assessed Available bid capacity = (A*N*1.5-B) Where, A = Maximum value of Electro-Mechanical and Civil engineering works executed in any one year during the last five years, N = 3.0 (Number of years prescribed for completion of the works for which bids are invited), B = Value, at the current price level, of existing commitments and on-going works to be completed concurrently with the works specified up to the period of “N” above.
Technical Capacity
... View More
The required prior work experience for the bidder includes having successfully completed or substantially completed similar works in the same name and style with which the bidder is applying for this bid. The similar work experience should be either as a Prime contractor or as a Partner in a Joint Venture during the last seven years. The similar works completed should meet one of the following criteria:
(i) Three similar completed works, each costing not less than 16.00 Crore (with Electro-Mechanical work not less than 9.6 crore and Civil work not less than 6.4 Crore)
(ii) Two similar completed works, each costing not less than 20.00 Crore (with Electro-Mechanical work not less than 12 crore and Civil work not less than 8 Crore)
(iii) One similar completed work costing not less than 31.50 Crore (with Electro-Mechanical work not less than 18.9 crore and Civil work not less than 12.6 Crore) The value and percentage of similar works completed are: - Average annual financial turnover: at least 30% of the Advertised Cost
- Financial resources: at least 25% to 50% of the requirement
- Cash flow requirement: INR 10.00 Cr
- Similar work experience: over the last seven years
- Participation in total contract amount: at least 25% to 50% of the requirement
- Substantial completion: at least 80% (value-wise) or more The bidder should have completed similar work, such as "LIFT IRRIGATION SCHEME INVOLVING ELECTRO-MECHANICAL COMPONENTS" with a motor capacity of not less than 425 HP. For joint ventures, each contract performed by each member should satisfy the minimum value of a single contract as required for a single entity. The cost of similar works should be brought to the current costing level by enhancing the actual value of work at a 7% rate per annum, calculated from the date of completion to the date of bid opening.
Costs
EMD
₹ 78,50,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_IFC_277504_1Tender No
eNIT- 03Tender Authority
Irrigation And Flood Control Department ViewPurchaser Address
-Website
http://http://ifcjmu.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Revamping of intake gate hoisting mechanism by way of the following:
-
-
-
... More
Providing and installation of 3-ton x 12 m lift medium duty chain pulley block along with monorail. The same are to be installed on gantries provided for trash racks.
2
-
-
... More
Complete revamping of the hoisting mechanism of intake gates as under:
Dismantling of pulling machine, drum rope hoist, shafts, couplings and gear boxes after opening the cover using special tools and tackles
4
-
-
... More
Fabrication, providing and fitting of bronze/ GM bearing bushes to the end plummer blocks (nominal bore ~ 100mm) based on the size of the block and shaft diameter. The job shall include repairing of bolts holes in plummer block supporting beam wherever required and p/f of lubricating oil to the plummer blocks for lubrication.
10
-
-
... More
Servicing of ball bearings (6217) by way of removing from the bearing housings, washing in k. oil, cleaning of housings, rusted components using WD-40 or similar chemical, reassembling, etc.
11
-
-
... More
Providing and fitting of ball bearing 6217 in place of worn out bearings.
5
-
-
... More
Replacement of all damaged gears, pinions, etc. with new gears of all hoisting mechanisms.
50
-
-
... More
Providing and fitting of M.S nuts and bolts (assorted sizes)
50
-
-
... More
Providing and fitting of FMC steel wire rope 22 mm diameter 6x36 construction having a tensile strength of 1770 N/sqmm as per IS 2266 to be fitted over rope drum and gate pulleys. The cost is inclusive of allied fixtures for fitting the rope as per requirement.
100
-
-
... More
Refitting of all the components of the rope-drum hoisting arrangement, and testing by mechanical lifting and lowering of gates.
4
-
-
... More
Providing and fitting of chequered plate 06mm thick - 03 nos. at specified locations for walkway on hoist platform.
56.52
-
-
... More
Painting of the super structures such as gearing & drum covers, couplings, railings, lifting gantries, etc with specified shades of enamel paint (orange/ black) in two coats after applying two coats of steel primer. Job includes surface preparation by scrapping off the old/ loose paint with the help of sand paper/ wire brush, etc.
150
-
-
... More
Greasing: Providing and applying multipurpose industrial grease conforming to IS 7623 for crane lifting mechanism, gearing mechanisms of gates, ball bearings, etc. (Castrol/ HPCL/ Champion/ equivalent make)
30
-
-
... More
Revamping of 900mm Mild steel flap valves on delivery side by way of dismanling the flap, replacement of SS hinge pin with hinges and refitting. Complete bituminous painting of all valves.
6
-
-
... More
Servo voltage stabilizers:
Providing, installation and testing of 600 KVA Servo Controlled Automatic Voltage stabilizer suitable for output voltage of 415 Volt +/-1%, 3 Ph, 50 Hz, with copper wound transformer (air/oil cooled) as per specifications mentioned in Annexure "B part I of III"
6
-
-
... More
Transformer:
Supply, installation, testing and commissioning of 1600 KVA 33kV/ 433V outdoor type copper wound distribution transformer (standby) with On Load Tap Changer - 15% to +5% in steps of 1.25%, Level-I (as per amendment no.4 to IS 1180 (Part I : 2014) continuously rated for 3 Ph, 50 Hz, at full load and provided with separate earthing. The transformer shall have power terminal arrangement, bushings / cable end box on HT side and cable end box on LT side. The transformer should have the specifications as per Annexure "C".
1
-
-
... More
Revamping of Main distribution panel by way of the following:
-
-
-
... More
Incomer panel:
Supply, retrofitting, testing and commissioning of 2000A, 4-Pole ACB (Electrical Draw-out Type) with Microprocessor release having breaking capacity Icu of 50 kA at 415V along with complete control wiring for O/L, S/C, instantaneous, E/F protection release. The job also includes fitting of necessary devices for SCADA (Supervisary Control and Data Acquisition) compatibility.
2
-
-
... More
O/G Panel:
Supply, retrofitting in panel O/G feeders, testing and commissioning of 800A, 3-Pole ACB (Electrical Draw-out Type) with Microprocessor release having breaking capacity Icu of 50 kA at 415V along with complete control wiring for O/L, S/C, instantaneous, E/F protection release. The job also includes fitting of necessary devices for SCADA (Supervisary Control and Data Acquisition) compatibility.
6
-
-
... More
Auxiliary panel:
Supply, retrofitting in panel auxiliary feeder and testing and commissioning of 100A, TPN MCCB with Microprocessor release having breaking capacity Icu of 50 kA at 415V along with complete control wiring. The job also includes fitting of necessary devices for SCADA (Supervisary Control and Data Acquisition) compatibility.
1
-
-
... More
Complete replacement of panel metering and protection components as under:
LED Ammeter 3Ph with inbuilt selector switch - 96x96mm; flush mounting type; Class 1
9
-
-
... More
LED Voltmeter 3Ph with inbuilt selector switch - 96x96mm; flush mounting type; Class 1
9
-
-
... More
LED frequency meter Class 0.2
1
-
-
... More
Digital VAF + PF meter Class 1 96x96mm with RS485 port
8
-
-
... More
Current transformer 2000/5A - Class 1 - Burden 15VA
6
-
-
... More
Current transformer 800/5A - Class 1 - Burden 15VA
18
-
-
... More
Providing and fitting of LED phase indicator 22.5mm dia with surge protection
27
-
-
... More
Fault annunciation and alarm system comprising of alarm fascia panel with required number of fascia windows, one for each fault and flash type, complete with three push buttons for alarm acceptance resetting and testing & RS485 serial communication port. The individual panels shall be fitted with a common 4-inch size electronic panel hooter
6
-
-
... More
Spray painting with two coats of synthetic enamel paint of complete distribution panel with RAL 7035 shade (Siemens grey) including two undercoats of steel primer.
120
-
-
... More
Capacitor bank:
Providing and installation of shunt capacitor panel in parallel with motors consisting of following:
· Capacitors of total rating 160 kVAR
· Capacitor duty contractors
· MCCB 3P 400A
· LED indicators R Y B
· Suitable size unarmoured aluminium cable for connection.
6
-
-
... More
Cable:
-
-
-
... More
Supplying and laying of 3Cx400 sq.mm XLPE insulated, armoured cable 1100V grade with ISI mark (IS 7098-I), solid/ stranded aluminium conductor of suitable lengths from O/G feeder – Voltage stabilizer – Starter – Motor. The job shall include providing and crimping of 400 sq.mm Aluminium lugs at all cable terminations/ connections.
360
-
-
... More
Supplying and laying of 1Cx400 sq.mm XLPE/ PVC insulated, armoured cable 1100V grade with ISI mark, solid/ stranded aluminium conductor of suitable lengths from L.T side of transformer to main control panel. The job shall include providing and crimping of 400 sq.mm Aluminium lugs at all cable terminations/ connections. The job also includes providing of L.T insulators, clamps and other allied works.
1040
-
-
... More
Starter:
Supply, installation, testing & commissioning of 415V Fully automatic Microprocessor based 400 H.P soft starter with built in bypass arrangement for pump control application as per specifications mentioned in Annexure "D".
6
-
-
... More
Insulation mats:
Providing and laying at site of high Voltage synthetic insulating mats as floor covering around Electro-mechanical gadgets for safe guarding life and limb of workmen due to possible leakage of current and short circuiting. The mats shall have the following characteristics/technical specifications:"
· Confirming to IS -15652-2006 with latest amendments
· Thickness- 3.0 mm
· Width – 1 Mtr
· Length 2 Mtr
· Anti- skid Type
· Material- PVC Elastomer
· Application: suitable for both AC and DC Electric installations.
· Class – C
· Colour- Black
20
-
-
... More
DC supply:
Providing, installation, testing and commissioning of DC supply including following main components:
i. Battery bank: One set 110V comprising of 55 nos. 2V SMF VRLA batteries of capacity 300AH at 10 hr rate discharge to 1.80 V per cell at 27 deg C, One set of inter tier connectors for batteries; modular stand and accessories. First filling of the acid and distrilled water shall be supplied at site.
ii. Battery charger: 01 no. industrial Float cum boost Battery Charger (30A/ 110V) mounted in a floor mounting type sheet steel cabinet, spray painted with proper ventillation. The battery charger shall have Single pole mains ON/ OFF switch, pilot lamp for mains supply ON, digital ammeter, DC under/ over voltage indicator, Battery reverse polarity indicator, mains fail indicator, overcharging protection, overload protection, I/P & battery overvoltage protection, undervoltage protection, battery low, RS485 port,etc. The charger must be complete with suitable main cord and heavy duty terminal blocks.
1
-
-
... More
Tools and other items:
-
-
-
... More
Ring Spanner set Size (6/7 to 30/32)
1
-
-
... More
Combination spanners 33 to 41
1
-
-
... More
Double ended Spanner Set of Size (12/13 to 40/41)
1
-
-
... More
Combination Pliers, 8 inch, 12 inch: (01 No. each)
1
-
-
... More
Long Nose Pliers 8 inch: (01 No.)
1
-
-
... More
Insulated Screw Driver 10 inch/ 8 Inch/ 6 Inch/ 4 inch: (01 No. Each)
1
-
-
... More
Hammer, 1.3 Kg and 3.6kg: (01 No each)
1
-
-
... More
Pipe Wrench heavy duty type: 300 mm, 450 mm & 600 mm: (01 No. each)
1
-
-
... More
Octagonal Chisels 200mm & 300mm : (01 No. each)
1
-
-
... More
Cantilever tool box 8in x 8in x 20in
1
-
-
... More
Bearing puller (sizes 8 to 10): (01 no. each)
1
-
-
... More
Spirit level 1.0 mm accuracy (900mm): 01 No.
1
-
-
... More
Bench vice fixed type (100mm opening)
1
-
-
... More
Digital Clamp Meter (1000A AC range/ 1000V/ LCD 7 segment display): 01 No. (Meco/Rishabh/ Fluke make)
1
-
-
... More
Vernier Calliper (Digital display 0-150mm): 01 No. (Freemans/ Mitutoyo/ Insize/ equivalent reputed)
1
-
-
... More
Aluminium ladder telescopic type 20ft
1
-
-
... More
Fire extinguishers (ABC type) 06 kg capacity as per IS 15683: 06 nos.
6
-
-
... More
Safety gadgets including helmets, gloves, shock proof shoes, etc.
12
-
-
... More
Earthing:
-
-
-
... More
Complete earthing of electrical motors, distribution panel, capacitor panel, voltage stabilizers, etc. with G.I earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and 20mm GI (medium class) watering pipe 2.7 meter long, funnel etc. with charcoal/ coke and salt as required.
4
-
-
... More
GI strip for earthing:
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
100
-
-
... More
Fabrication, erection of 02 nos. CGI shed of size 41ft x 9ft by way of below mentioned sub-works:
-
-
-
... More
Engagement of hydraulic excavator for cutting, filling and levelling etc.
16
-
-
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift up-to 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil
55.22
-
-
... More
Providing/filling of dry-stone soling tightly hand packed under foundation and under floors, including all carriages /head load upto site of work complete.
32.2
-
-
... More
Providing/ laying in position M7.5 cement concrete mix using graded stone aggregate including all carriages /head load upto site of work complete.
32.21
-
-
... More
Providing/laying in position M20 reinforced cement concrete mix using graded stone aggregate excluding cost of centering/shuttering etc, but including all carriages /head load upto site of work complete.
18.28
-
-
... More
Reinforcement for RCC work including straightening, cutting, bending & placing in position & binding complete (using TMT bars) including all carriages/ head load upto site of work complete @ 100kg/cum.
Weight = 9.14 x 100 = 914 kg
1828
-
-
... More
Providing/laying in position M10 cement concrete mix in trenches using graded stone aggregate excluding cost of centering/shuttering etc, but including all carriages /head load upto site of work complete.
60.32
-
-
... More
Centering & shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns etc. for mass concrete. (12mm thick water proof ply board) including all the carriages /head load upto site of work complete.
221.44
-
-
... More
Providing, laying, watering levelling and compacting (GSB Nallah muck) with aggregate size not exceeding 90mm granular sub-base material to specified lines, grades, and density finished work to be measured including carriage of materials by mechanical transport from source of supply upto site of work also includes all leads, lifts, loading, unloading and stacking charges complete.
40.34
-
-
... More
Structural steel work welded in built up sections, trusses and framed work, doors and windows purlins including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer.
i. 12 Nos. Vertical Posts/ Pillars of hollow steel section 150x150x6
ii. Base plate and top plate of vertical posts fabricated from 10mm thick plate welded for pipe reinforcement
iii. 02 Nos pedestals to each vertical post for secure anchoring of posts fabricated out of ISA 50x50x5 2 ft long each.
iv. Cladding runners of ISA 50x50x5 = (4x40’) + 2(4x13’.6”) + (1x40’) = 308’
v Door frame & door (01 No.) of ISA 50x50x5 = {4x7’}
vi Window frame & windows (03 Nos.) of ISA 50x50x5 = {2x4’} each
vii. 06 No. of trusses fabricated of double ISA 50x50x5 having rafter of double ISA 65x65x5:-
Gusset plates fabricated out of 8mm thick plate
viii. Purlins fabricated out of ISMC75x40, 44’ long:- 12 Nos
ix. Cleats fabricated of ISA50x6, 0’.6” long:- 60 Nos
x. Soffits/ Chajja and Gables out of ISA25x4
10288
-
-
... More
Providing and fitting reputed make HI rib profiled sheets suitable for walls and roof of shed, 1000 to 1200mm overall width and total painted thickness of >= 0.5mm.
385.36
-
-
... More
Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
49.06
-
-
... More
Providing and fixing pre coated coloured MS eaves boarding 200mm wide 1.2mm thick including all necessary screws, J or L hooks, nuts with washers all as complete job. Length = (2 x 44’) + 4 x10’ = 128 rft = 39 mtrs
78
-
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing ball bearings and necessary 27.5cm long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part 1 and M.S top cover of required thickness for rolling shutters out of 80x1.20 mm M.S laths with 1.20mm thick top cover, including all the carriages /head load upto site of work complete.
29.72
-
-
... More
Providing and fixing by way of welding, drilling, nuts with bolts etc SS window hinges 3” long , door hinges 4” long, window latches, tower bolts, door lock/bolt of reputed make with locking arrangement, 90 mm padlocks (04 Nos), 70 mm padlock (03 Nos) or and other unforeseen items.
2
-
-
... More
Providing and laying Cement concrete flooring in M15 mix finished with a floating coat of neat cement including cement slurry 50 mm thick with 20 mm nominal size crushed stone aggregate, including all the carriages /head load upto site of work complete.
100.36
-
-
... More
Providing and applying 20 mm thick cement plaster in 1:4 mix with coarse sand to sides of plinth, ramp and staircase etc, including all the carriages /head load upto site of work complete.
63.64
-
-
... More
Facelifting and Electrification of pump house, its premises and store shed:
-
-
-
... More
Providing, fitting and installation of 50-watt LED flood lights inside and outside the pump house walls and wherever necessary as per requirement, comprising of brackets and necessary fixtures required for fitting the flood lights etc. Make: BAJAJ/Havells /Philips. (JETA Type or similar as per choice of Department) The job includes wiring of required size & S/W of required amperage.
12
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with piano type switch, phenol laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
20
-
-
... More
Wiring for heating point 2.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with switch socket combine, phenolic laminated sheet, suitable size MS box and earthing the point with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
5
-
-
... More
Fabrication, providing and fitting of Sub-main panel board of size 2’x2’. The frame of the board shall be fabricated out of 35x35x5mm M.S angle iron and fitted with ply sheet 12mm thick and face covered with ACC sheets. The panel board shall have suitable legs which shall have to be embedded into the pump house wall.
1
-
-
... More
Providing & fitting of 1200mm sweep ceiling fan. (Havells/ Orient/ Bajaj) with controller
1
-
-
... More
Providing & fitting of 300mm sweep metal exhaust fan. (Havells/ Orient/ Bajaj)
2
-
-
... More
LED 12-watt lamps (Havells/ Syska /Wipro/ Philips)
26
-
-
... More
Providing and fitting of service line for electrification of pump house and station premises. The service line shall be 2 Core-16 mm sq. Armoured Aluminium XLPE cable including suitable size & rating of thimbles to be drawn from Electric transformer sub-station/Main panel board to sub-main panel board or as per requirement.
90
-
-
... More
Complete earthing of the electrification of pump house and station premises with G.I. earth plate 600 mm X 600 mm X 6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. The job includes providing and laying 6SWG GI wire as earthing conductor.
1
-
-
... More
Providing and fitting of MCBs for electrical circuit with 100A as Incomer, 10A MCBs for lighting circuits of rooms, pump room, floodlighting, store shed, etc, 20A MCB for heating circuits. The MCBs shall be mounted on a MCB distribution box 12-way fitted on panel board for Central control of electrification of pump house and station premises. (MCB makes: Havells/ Legrand/ L&T/ Schneider/ equivalent)
1
-
-
... More
Providing and fitting of 415V 100 Amp. Capacity 4-pole change over switch along with allied wiring for the lighting system of the pump house. The changeover switch shall be of reputed make (Anchor/ Havells/ L&T/ SSK).
1
-
-
... More
Providing and fitting of 7.5 KVA fully automatic Oil-cooled voltage stabilizer ranging from 90-300 Volts giving output voltage of 200-230 Volts. The job also includes P/F of 12-volt DC battery 200 AH (Exide) along with 1100 VA sine wave Inverter (Microtek/ APC/ Sukam make) along with leads terminals and necessary wiring complete in all respects.
1
-
-
... More
Providing, fitting and installation of 50-watt LED Street lights outside the pump house on light poles wherever necessary as per requirement, comprising of brackets and necessary fixtures required for fitting the street lights etc. Make: BAJAJ/Havells /Philips. (JETA Type or similar as per choice of Department) The job includes wiring of required size & S/W of required amperage.
20
-
-
... More
Complete Servicing of 2 x 1.6 MVA H.T transformer of Stage 1st by way of:
-
-
-
... More
Dismantling of 1.6 MVA HT Transformer by way of disconnecting of all HT and LT connections, opening of top lid, draining out of T. oil, and its safe placement for further refilling, taking out coils after removal of core assembly, etc. job also included detaching of core HV coils. The job also includes decarburizing laminated core. The core then firmly fixed with channeled frame to prevent noise and vibration. The job includes complete assembling of 1.6 MVA HT Transformer after cleaning of tank, fitting of coil assembly in the tank. Job further includes closing of the transformer lid by way of fitting of existing nuts/bolts and gaskets, insulators, etc. Refilling of t.oil upto required level in tank. Reconnecting of HT/LT connections and testing. The job also includes transportation/hiring of crane etc. for loading, unloading and stacking of various items including its dragging and rotation as per requirements at site.
2
-
-
... More
Replacement, providing/fitting of top cover gasket and gaskets of oil gauge. Replacement, Providing/ fitting of insulating materials such as Press Board, Cotton Tape, Kraft Paper. The job includes cost of all sundry items required.
2
-
-
... More
Replacement, Providing / Fitting of MS bolts and nuts, washers, spring washers of different size.
20
-
-
... More
Providing of transformer oil conforming to IS 335 (Preferred make: Power oil/ Indian oil Servo/HPCL)
3760
-
-
... More
Revamping of existing 1.6 MVA Sub-Station equipment by way of:
-
-
-
... More
Supplying and erection of a set of 33 KV polymeric composite disc insulator 36KV, min falling load 70KN, Lighting impulse 170KV positive and 180KV Negative, creepage distance 900mm with fitting.
21
-
-
... More
Supplying and erection of 33 KV polymeric composite pin insulator 36KV, 10KN, lighting impulse170KV positive and 180KV Negative, creepage distance 900mm with fitting.
30
-
-
... More
Earthing of Substation --
Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239. GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body, G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts, refilled with earth enhancement materials and earth Chamber made of brick masonry with RCC slab cover.
6
-
-
... More
GI strip for earthing:
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
100
-
-
... More
Providing and fitting of 33 KV 400A 3-ph Gang operated Air Break Switch
2
-
-
... More
Supplying and erection of single piece nonlinear resistor type lightning arrestor suitable for 3 wire, 33 KV overhead lines with rated voltage 30 KV (rms) with a nominal discharge current rating of 10 KA (station class) and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required. The job also includes lightening arrestor for the pump house.
7
-
-
... More
Supply and erection of horn gap fuse set with post insulators suitable for 33 wire, 33 KV overhead lines.
2
-
-
... More
G.I Nuts & Bolts
50
-
-
... More
Providing and fixing of 'DANGER' plate of standard size for 440V/ 11KV/ 33KV.
20
-
-
... More
Spray painting with two coats of Red Oxide over the surfaces of sub-station poles, channels, and allied things etc.
10
-
-
... More
Spray painting with two coats of Aluminium Paint after applying the red oxide over the surfaces of sub-station poles, channels, and allied things etc.
10
-
-
... More
Providing facilities to pump operators by way of:
-
-
-
... More
A. Floor Matting
150
-
-
... More
B. Commercial Cylinder security, cooktop 2-burner and allied.
1
-
-
... More
C. Blankets
3
-
-
... More
D. Bedding (mattress and quilt, pillow)
3
-
-
... More
E. Utensils and crockery item
1
-
-
... More
Marval Stage 2nd
Pumping Unit HL: Replacement of jhonston make 35 cusec vertical mixed flow single stage vertical turbine pumping line shaft type assembly by way of Design, Manufacturing, Supply, retrofitting, testing & commissioning of Vertical Turbine pump lineshaft motor set of specified duty parameters along with column pipe and bowl assembly, discharge head, base channeletc complete as per relevent IS in existing pump bay with specified capacity vertical solid shaft TEFC squirrel cage induction motor of specifications mentioned in Annexure"A part I of II "
7
-
-
... More
"Pumping Unit LL: Replacement of jhonston make 35 cusec vertical mixed flow single stage vertical turbine line shaft type pumping assembly by way of Design, Manufacturing, Supply, retrofitting, testing & commissioning of Vertical Turbine pump lineshaft motor set of specified duty parameters along with column pipe and bowl assembly, discharge head, base channeletc complete as per relevent IS in existing pump bay with specified capacity vertical solid shaft TEFC squirrel cage induction motor of Specifications mentioned in Annexure"A part I of II "
3
-
-
... More
"Sludge pump:
Providing and installation of sewage pump of 3-phase 40000 GPH (UK) x 12m head coupled with suitable sized motor. The job includes providing and installation of FASD starter panel with requisite protection devices, suitable cable for electrical connection, canvas hose 6” – 30 mtrs, hose clamps, jointer. The job also includes fitting of necessary devices for SCADA (Supervisary Control and Data Acquisition), RTDs for temperature monitoring and dry run protection."
Material of Construction:
Impeller – SS; Shafts – SS 410
1
-
-
... More
Revamping of 10-Ton EOHT Crane by way of the following:
a. Complete revamping of electrical components including replacement of damaged control wiring, terminal blocks, p/f of pendant switch, etc. and replacement of crane duty contactors.
b. Complete servicing/replacement of crane motors, worm gear, etc.
c. Providing of U-clamps, bulldog grips, slings, etc as per requirement.
1
-
-
... More
Supply, retrofitting, testing and commissioning of Sluice valve (SCADA compatible) of 600mm size, PN 1.0 generally conforming to IS 14846 or equivalent international standard of following specification: -
Material of construction: -
Body, Bonnet, Wedge: S.G Iron as per IS 1865
Spindle/Stem: Stainless Steel as per IS 6603
Stem nut, seat ring: High tensile brass
The job also includes providing and fitting of rubber gaskets for end connections.
Make: VAG/ IVC/ KIRLOSKAR/ TALIS/ AVK/GM/equivalent make
7
-
-
... More
Supply, retrofitting, testing and commissioning of Reflux (Non-Return) valve (SCADA compatible) of 600mm size PN 1.0 generally conforming to IS-5312 or equivalent international standard with latest amendments.
Material of construction: -
Body, cover, door, hinge: Ductile Iron Hinge pin: SS 304/ SS 316 Body ring, disc face: SS 410
Surface Protection: Electro static epoxy powder coating.
The job includes complete replacement of 65mm By-pass arrangement for NRV. Make: VAG/ IVC/ KIRLOSKAR/ TALIS/ AVK/GM/equivalent make
7
-
-
... More
Revamping of mechanical works of delivery side along with supply, retrofitting of 600mm Mild steel flap valve on the exit of delivery pipe line. The job also includes 2 coats of paints.
6
-
-
... More
Providing and fitting of M.S nuts and bolts (assorted sizes)
100
-
-
... More
"Servo voltage stabilizers HL:
Providing, installation and testing of 600 KVA Servo Controlled Automatic Voltage stabilizer suitable for output voltage of 415 Volt +/-1%, 3 Ph, 50 Hz, with copper wound transformer (air/oil cooled) as per specifications mentioned in Annexure "B part I of III"
7
-
-
... More
"Servo voltage stabilizers LL: Providing, installation, testing of 175 KVA Servo Controlled Automatic Voltage stabilizer suitable for output voltage of 415 Volt +/-1%, 3 Ph, 50 Hz, with copper wound transformer (oil cooled)as per specifications mentioned in Annexure "B part III of III"
3
-
-
... More
"Transformer:
Supply, installation, testing and commissioning of 1600 KVA 33kV/ 433V outdoor type copper wound distribution transformer (standby) with On Load Tap Changer - 15% to +5% in steps of 1.25%, Level-I (as per amendment no.4 to IS 1180 (Part I : 2014) continuously rated for 3 Ph, 50 Hz, at full load and provided with separate earthing. The transformer shall have power terminal arrangement, bushings / cable end box on HT side and cable end box on LT side. The transformer should have the specifications as per Annexure "C".
1
-
-
... More
Revamping of the Main distribution panel by way of the following:
-
-
-
... More
"Incomer panel:
Supply, retrofitting, testing and commissioning of 2000A, 4-Pole ACB (Electrical Draw-out Type) with Microprocessor release having breaking capacity Icu of 50 kA at 415V along with complete control wiring for O/L, S/C, instantaneous, E/F protection release. The job also includes fitting of necessary devices for SCADA (Supervisary Control and Data Acquisition) compatibility."
2
-
-
... More
ACB O/G Panel
Supply, retrofitting in panel O/G feeders, testing and commissioning of 800A, 3-Pole ACB (Electrical Draw-out Type) with Microprocessor release having breaking capacity Icu of 50 kA at 415V along with complete control wiring for O/L, S/C, instantaneous, E/F protection release. The job also includes fitting of necessary devices for SCADA (Supervisary Control and Data Acquisition) compatibility.
7
-
-
... More
MCCB O/G Panel
Supply, retrofitting in panel O/G feeders, testing and commissioning of 3P 400A, Air Break Fixed MCCB conforms to IS / IEC 60947-2 with trip free mechanism, current limiting type with Microprocessor release (O/C, S/C & E/F) with adjustable settings & having minimum 2NO+2NC potential free auxiliary contacts with all necessary Electro-Mechanical protections & interlocks etc. The job also includes fitting of necessary devices for SCADA (Supervisary Control and Data Acquisition).
3
-
-
... More
Auxiliary panel
Supply, retrofitting in panel auxiliary feeder and testing and commissioning of 100A, TPN MCCB with Microprocessor release having breaking capacity Icu of 50 kA at 415V along with complete control wiring. The job also includes fitting of necessary devices for SCADA (Supervisary Control and Data Acquisition) compatibility.
1
-
-
... More
Complete replacement of panel metering and protection components as under:
LED Ammeter 3Ph with inbuilt selector switch - 96x96mm; flush mounting type; Class 1
13
-
-
... More
LED Voltmeter 3Ph with inbuilt selector switch - 96x96mm; flush mounting type; Class 1
13
-
-
... More
LED frequency meter Class 0.2
1
-
-
... More
Digital VAF + PF meter Class 1 96x96mm with RS485 port
12
-
-
... More
Current transformer 2000/5A - Class 1 - Burden 15VA
6
-
-
... More
Current transformer 800/5A - Class 1 - Burden 15VA
21
-
-
... More
Providing and fitting of LED phase indicator 22.5mm dia with surge protection
39
-
-
... More
Fault annunciation and alarm system comprising of alarm fascia panel with required number of fascia windows, one for each fault and flash type, complete with three push buttons for alarm acceptance resetting and testing & RS485 serial communication port. The individual panels shall be fitted with a common 4-inch size electronic panel hooter
10
-
-
... More
Spray painting with two coats of synthetic enamel paint of complete distribution panel with RAL 7035 shade (Siemens grey) including two undercoats of steel primer.
250
-
-
... More
Capacitors Bank HL:
Providing and installation of shunt capacitor panel in parallel with motors consisting of following:
· Capacitors of total rating 175kVAR
· Capacitor duty contractors
· MCCB 3P 400A
· LED indicators R Y B Suitable size unarmoured aluminium cable for connection.
7
-
-
... More
Capacitors Bank LL:
Providing and installation of shunt capacitor panel in parallel with motors consisting of following:
· Capacitors of total rating 50kVAR
· Capacitor duty contractors
· MCCB 3P 160A
· LED indicators R Y B Suitable size unarmoured aluminium cable for connection.
3
-
-
... More
Cable LL:
Supplying and laying of 3Cx185 sq.mm XLPE/ PVC insulated, unarmoured cable 1100V grade with ISI mark, solid/ stranded aluminium conductor of suitable lengths from O/G feeder – Voltage stabilizer – Starter – Motor. The job shall include providing and crimping of 185 sq.mm Aluminium lugs at all cable terminations/ connections.
90
-
-
... More
Cable HL:
Supplying and laying of 3Cx400 sq.mm XLPE insulated, armoured cable 1100V grade with ISI mark (IS 7098-I), solid/ stranded aluminium conductor of suitable lengths from O/G feeder – Voltage stabilizer – Starter – Motor. The job shall include providing and crimping of 400 sq.mm Aluminium lugs at all cable terminations/ connections.
490
-
-
... More
Supplying and laying of 1Cx400 sq.mm XLPE/ PVC insulated, armoured cable 1100V grade with ISI mark, solid/ stranded aluminium conductor of suitable lengths from L.T side of transformer to main control panel. The job shall include providing and crimping of 400 sq.mm Aluminium lugs at all cable terminations/ connections. The job also includes providing of L.T insulators, clamps and other allied works.
1040
-
-
... More
"Starter HL:
Supply, installation, testing & commissioning of 415 V Fully automatic Microprocessor based 425 H.P soft starter with built in bypass arrangement for pump control application as per specifications mentioned in Annexure "D".
7
-
-
... More
"Starter LL: Supply, installation, testing & commissioning of 415 V Fully automatic Microprocessor based 125 H.P soft starter with built in bypass arrangement for pump control application as per specifications mentioned in Annexure "D".
3
-
-
... More
"Insulation mats
Providing and laying at site of high Voltage synthetic insulating mats as floor covering around Electro-mechanical gadgets for safe guarding life and limb of workmen due to possible leakage of current and short circuiting. The mats shall have the following characteristics/technical specifications:"
· Confirming to IS -15652-2006 with latest amendments
· Thickness- 3.0 mm
· Width – 1 Mtr
· Length 2 Mtr
· Anti- skid Type
· Material- PVC Elastomer
· Application: suitable for both AC and DC Electric installations.
· Class – C
· Colour- Black
25
-
-
... More
DC supply:
Providing, installation, testing and commissioning of DC supply including following main components:
i. Battery bank: One set 110V comprising of 55 nos. 2V SMF VRLA batteries of capacity 300AH at 10 hr rate discharge to 1.80 V per cell at 27 deg C, One set of inter tier connectors for batteries; modular stand and accessories. First filling of the acid and distrilled water shall be supplied at site.
ii. Battery charger: 01 no. industrial Float cum boost Battery Charger (30A/ 110V) mounted in a floor mounting type sheet steel cabinet, spray painted with proper ventillation. The battery charger shall have Single pole mains ON/ OFF switch, pilot lamp for mains supply ON, digital ammeter, DC under/ over voltage indicator, Battery reverse polarity indicator, mains fail indicator, overcharging protection, overload protection, I/P & battery overvoltage protection, undervoltage protection, battery low, RS485 port,etc. The charger must be complete with suitable main cord and heavy duty terminal blocks.
1
-
-
... More
Tools and other items:
-
-
-
... More
Ring Spanner set Size (6/7 to 30/32)
1
-
-
... More
Combination spanners 33 to 41
1
-
-
... More
Double ended Spanner Set of Size (12/13 to 40/41)
1
-
-
... More
Combination Pliers, 8 inch, 12 inch: (01 No. each)
1
-
-
... More
Long Nose Pliers 8 inch: (01 No.)
1
-
-
... More
Insulated Screw Driver 10 inch/ 8 Inch/ 6 Inch/ 4 inch: (01 No. Each)
1
-
-
... More
Hammer, 1.3 Kg and 3.6kg: (01 No each)
1
-
-
... More
Pipe Wrench heavy duty type: 300 mm, 450 mm & 600 mm: (01 No. each)
1
-
-
... More
Octagonal Chisels 200mm & 300mm : (01 No. each)
1
-
-
... More
Cantilever tool box 8in x 8in x 20in
1
-
-
... More
Bearing puller (sizes 8 to 10): (01 no. each)
1
-
-
... More
Spirit level 1.0 mm accuracy (900mm): 01 No.
1
-
-
... More
Bench vice fixed type (100mm opening)
1
-
-
... More
Digital Clamp Meter (1000A AC range/ 1000V/ LCD 7 segment display): 01 No. (Meco/Rishabh/ Fluke make)
1
-
-
... More
Vernier Calliper (Digital display 0-150mm): 01 No. (Freemans/ Mitutoyo/ Insize/ equivalent reputed)
1
-
-
... More
Digital Altimeter/ barometer altitude range upto 8000 Mtr, accuracy: 1m & pressure accuracy 1mbar (Make: BARIGO / HTC)
1
-
-
... More
Aluminium ladder telescopic type 20ft
1
-
-
... More
Fire extinguishers (ABC type) 06 kg capacity as per IS 15683: 06 nos.
6
-
-
... More
Safety gadgets including helmets, gloves, shock proof shoes, etc.
12
-
-
... More
300 A single phase IGBT welding machine with lead, holder, clamps, etc. & MS electrodes (10 kg 3.2mm)
1
-
-
... More
Earthing:
-
-
-
... More
Complete earthing of electrical motors, distribution panel, capacitor panel, voltage stabilizers, etc. with G.I earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and 20mm GI (medium class) watering pipe 2.7 meter long, funnel etc. with charcoal/ coke and salt as required.
4
-
-
... More
GI strip for earthing:
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
100
-
-
... More
Fabrication, erection of 02 nos. CGI shed of size 41ft x 9ft by way of below mentioned sub-works:
-
-
-
... More
Engagement of hydraulic excavator for cutting, filling and levelling etc.
16
-
-
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift up-to 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil
55.22
-
-
... More
Providing/filling of dry-stone soling tightly hand packed under foundation and under floors, including all carriages /head load upto site of work complete.
32.2
-
-
... More
Providing/ laying in position M7.5 cement concrete mix using graded stone aggregate including all carriages /head load upto site of work complete.
32.21
-
-
... More
Providing/laying in position M20 reinforced cement concrete mix using graded stone aggregate excluding cost of centering/shuttering etc, but including all carriages /head load upto site of work complete.
18.28
-
-
... More
Reinforcement for RCC work including straightening, cutting, bending & placing in position & binding complete (using TMT bars) including all carriages/ head load upto site of work complete @ 100kg/cum.
Weight = 9.14 x 100 = 914 kg
1828
-
-
... More
Providing/laying in position M10 cement concrete mix in trenches using graded stone aggregate excluding cost of centering/shuttering etc, but including all carriages /head load upto site of work complete.
60.32
-
-
... More
Centering & shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns etc. for mass concrete. (12mm thick water proof ply board) including all the carriages /head load upto site of work complete.
221.44
-
-
... More
Providing, laying, watering levelling and compacting (GSB Nallah muck) with aggregate size not exceeding 90mm granular sub-base material to specified lines, grades, and density finished work to be measured including carriage of materials by mechanical transport from source of supply upto site of work also includes all leads, lifts, loading, unloading and stacking charges complete.
40.34
-
-
... More
Structural steel work welded in built up sections, trusses and framed work, doors and windows purlins including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer.
i. 12 Nos. Vertical Posts/ Pillars of hollow steel section 150x150x6
ii. Base plate and top plate of vertical posts fabricated from 10mm thick plate welded for pipe reinforcement
iii. 02 Nos pedestals to each vertical post for secure anchoring of posts fabricated out of ISA 50x50x5 2 ft long each.
iv. Cladding runners of ISA 50x50x5 = (4x40’) + 2(4x13’.6”) + (1x40’) = 308’
v Door frame & door (01 No.) of ISA 50x50x5 = {4x7’}
vi Window frame & windows (03 Nos.) of ISA 50x50x5 = {2x4’} each
vii. 06 No. of trusses fabricated of double ISA 50x50x5 having rafter of double ISA 65x65x5:-
Gusset plates fabricated out of 8mm thick plate
viii. Purlins fabricated out of ISMC75x40, 44’ long:- 12 Nos
ix. Cleats fabricated of ISA50x6, 0’.6” long:- 60 Nos
x. Soffits/ Chajja and Gables out of ISA25x4
10288
-
-
... More
Providing and fitting reputed make HI rib profiled sheets suitable for walls and roof of shed, 1000 to 1200mm overall width and total painted thickness of >= 0.5mm.
385.36
-
-
... More
Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
49.06
-
-
... More
Providing and fixing pre coated coloured MS eaves boarding 200mm wide 1.2mm thick including all necessary screws, J or L hooks, nuts with washers all as complete job. Length = (2 x 44’) + 4 x10’ = 128 rft = 39 mtrs
78
-
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing ball bearings and necessary 27.5cm long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part 1 and M.S top cover of required thickness for rolling shutters out of 80x1.20 mm M.S laths with 1.20mm thick top cover, including all the carriages /head load upto site of work complete.
29.72
-
-
... More
Providing and fixing by way of welding, drilling, nuts with bolts etc SS window hinges 3” long , door hinges 4” long, window latches, tower bolts, door lock/bolt of reputed make with locking arrangement, 90 mm padlocks (04 Nos), 70 mm padlock (03 Nos) or and other unforeseen items.
2
-
-
... More
Providing and laying Cement concrete flooring in M15 mix finished with a floating coat of neat cement including cement slurry 50 mm thick with 20 mm nominal size crushed stone aggregate, including all the carriages /head load upto site of work complete.
100.36
-
-
... More
Providing and applying 20 mm thick cement plaster in 1:4 mix with coarse sand to sides of plinth, ramp and staircase etc, including all the carriages /head load upto site of work complete.
63.64
-
-
... More
Facelifting and Electrification of pump house, its premises and store shed:
-
-
-
... More
Providing, fitting and installation of 50-watt LED flood lights inside and outside the pump house walls and wherever necessary as per requirement, comprising of brackets and necessary fixtures required for fitting the flood lights etc. Make: BAJAJ/Havells /Philips. (JETA Type or similar as per choice of Department) The job includes wiring of required size & S/W of required amperage.
12
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with piano type switch, phenol laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
20
-
-
... More
Wiring for heating point 2.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with switch socket combine, phenolic laminated sheet, suitable size MS box and earthing the point with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
5
-
-
... More
Fabrication, providing and fitting of Sub-main panel board of size 2’x2’. The frame of the board shall be fabricated out of 35x35x5mm M.S angle iron and fitted with ply sheet 12mm thick and face covered with ACC sheets. The panel board shall have suitable legs which shall have to be embedded into the pump house wall.
1
-
-
... More
Providing & fitting of 1200mm sweep ceiling fan. (Havells/ Orient/ Bajaj) with controller
1
-
-
... More
Providing & fitting of 300mm sweep metal exhaust fan. (Havells/ Orient/ Bajaj)
4
-
-
... More
LED 12-watt lamps (Havells/ Syska /Wipro/ Philips)
26
-
-
... More
Providing and fitting of service line for electrification of pump house and station premises. The service line shall be 2 Core-16 mm sq. Armoured Aluminium XLPE cable including suitable size & rating of thimbles to be drawn from Electric transformer sub-station/Main panel board to sub-main panel board or as per requirement.
90
-
-
... More
Complete earthing of the electrification of pump house and station premises with G.I. earth plate 600 mm X 600 mm X 6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. The job includes providing and laying 6SWG GI wire as earthing conductor.
1
-
-
... More
Providing and fitting of MCBs for electrical circuit with 100A as Incomer, 10A MCBs for lighting circuits of rooms, pump room, floodlighting, store shed, etc, 20A MCB for heating circuits. The MCBs shall be mounted on a MCB distribution box 12-way fitted on panel board for Central control of electrification of pump house and station premises. (MCB makes: Havells/ Legrand/ L&T/ Schneider/ equivalent)
1
-
-
... More
Providing and fitting of 415V 100 Amp. Capacity 4-pole change over switch along with allied wiring for the lighting system of the pump house. The changeover switch shall be of reputed make (Anchor/ Havells/ L&T/ SSK).
1
-
-
... More
Providing and fitting of 7.5 KVA fully automatic Oil-cooled voltage stabilizer ranging from 90-300 Volts giving output voltage of 200-230 Volts. The job also includes P/F of 12-volt DC battery 200 AH (Exide) along with 1100 VA sine wave Inverter (Microtek/ APC/ Sukam make) along with leads terminals and necessary wiring complete in all respects.
1
-
-
... More
Providing, fitting and installation of 50-watt LED Street lights outside the pump house on light poles wherever necessary as per requirement, comprising of brackets and necessary fixtures required for fitting the street lights etc. Make: BAJAJ/Havells /Philips. (JETA Type or similar as per choice of Department) The job includes wiring of required size & S/W of required amperage.
15
-
-
... More
Complete Servicing of 2 x 1.6 MVA H.T transformer of Stage 2nd by way of:
-
-
-
... More
Dismantling of 1.6 MVA HT Transformer by way of disconnecting of all HT and LT connections, opening of top lid, draining out of T. oil, and its safe placement for further refilling, taking out coils after removal of core assembly, etc. job also included detaching of core HV coils. The job also includes decarburizing laminated core. The core then firmly fixed with channeled frame to prevent noise and vibration. The job includes complete assembling of 1.6 MVA HT Transformer after cleaning of tank, fitting of coil assembly in the tank. Job further includes closing of the transformer lid by way of fitting of existing nuts/bolts and gaskets, insulators, etc. Refilling of t.oil upto required level in tank. Reconnecting of HT/LT connections and testing. The job also includes transportation/hiring of crane etc. for loading, unloading and stacking of various items including its dragging and rotation as per requirements at site.
2
-
-
... More
Replacement, providing/fitting of top cover gasket and gaskets of oil gauge. Replacement, Providing/ fitting of insulating materials such as Press Board, Cotton Tape, Kraft Paper. The job includes cost of all sundry items required.
2
-
-
... More
Replacement, Providing / Fitting of MS bolts and nuts, washers, spring washers of different size.
20
-
-
... More
Providing of transformer oil conforming to IS 335 (Preferred make: Power oil/ Indian oil Servo/HPCL)
3760
-
-
... More
Revamping of existing 1.6 MVA Sub-Station equipment by way of:
-
-
-
... More
Supplying and erection of a set of 33 KV polymeric composite disc insulator 36KV, min falling load 70KN, Lighting impulse 170KV positive and 180KV Negative, creepage distance 900mm with fitting.
21
-
-
... More
Supplying and erection of 33 KV polymeric composite pin insulator 36KV, 10KN, lighting impulse170KV positive and 180KV Negative, creepage distance 900mm with fitting.
30
-
-
... More
Earthing of Substation --
Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239. GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body, G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts, refilled with earth enhancement materials and earth Chamber made of brick masonry with RCC slab cover.
6
-
-
... More
GI strip for earthing:
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
100
-
-
... More
Providing and fitting of 33 KV 400A 3-ph Gang operated Air Break Switch
2
-
-
... More
Supplying and erection of single piece nonlinear resistor type lightning arrestor suitable for 3 wire, 33 KV overhead lines with rated voltage 30 KV (rms) with a nominal discharge current rating of 10 KA (station class) and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required. The job also includes lightening arrestor for the pump house.
7
-
-
... More
Supply and erection of horn gap fuse set with post insulators suitable for 33 wire, 33 KV overhead lines..
2
-
-
... More
Providing and fitting of G.I Nuts & Bolts (assorted size)
50
-
-
... More
Providing and fixing of 'DANGER' plate of standard size for 440V/ 11KV/ 33KV.
20
-
-
... More
Spray painting with two coats of Red Oxide over the surfaces of sub-station poles, channels, and allied things etc.
10
-
-
... More
Spray painting with two coats of Aluminium Paint after applying the red oxide over the surfaces of sub-station poles, channels, and allied things etc.
10
-
-
... More
33KV CT/PT combined Unit, 3-phase, 50Hz, ONAN cooled, outdoor type. The combined unit, CTs and PTs specification as per requirement. Along with Metering cubicle for 3-phase 4 wire metering system suitable for 3 phase, HT, tri-vector meter with other allied materials like Copper wire, lugs, GI channels, earthing. as per specification approved by KPDCL.
1
-
-
... More
Providing facilities to pump operators by way of:
-
-
-
... More
A. Floor Matting
150
-
-
... More
B. Commercial Cylinder security, cooktop 2-burner and allied.
1
-
-
... More
C. Blankets
3
-
-
... More
D. Bedding (mattress and quilt, pillow)
3
-
-
... More
E. Utensils and crockery item
1
-
-
... More
Marval Stage 3rd
Pumping Unit:
Replacement of jhonston make 35 cusec vertical mixed flow single stage vertical turbine line shaft type pumping assembly by way of Design, Manufacturing, Supply, retrofitting, testing & commissioning of Vertical Turbine pump lineshaftmotor set of specified duty parameters along with column pipe and bowl assembly, discharge head, base channeletc complete as per relevent IS in existing pump bay with specified capacity vertical solid shaft TEFC squirrel cage induction motor of Specifications mentioned in Annexure"A part I of II "
5
-
-
... More
Revamping of 10-Ton EOHT Crane by way of the following:
a. Complete revamping of electrical components including replacement of damaged control wiring, terminal blocks, p/f of pendant switch, etc. and replacement of crane duty contactors.
b. Complete servicing/replacement of crane motors, worm gear, etc.
c. Providing of U-clamps, bulldog grips, slings, etc as per requirement.
1
-
-
... More
Greasing: Providing and applying multipurpose industrial grease conforming to IS 7623 for crane lifting mechanism, ball bearings, etc. (Castrol/ HPCL/ Champion/ equivalent make)
10
-
-
... More
Supply, retrofitting, testing and commissioning of Reflux (Non-Return) valve of 600mm size PN 1.0 generally conforming to IS-5312 or equivalent international standard with latest amendments.
Material of construction: -
Body, cover, door, hinge: Ductile Iron Hinge pin: SS 304/ SS 316 Body ring, disc face: SS 410
Surface Protection: Electro static epoxy powder coating.
The job includes complete replacement of 65mm By-pass arrangement for NRV. Make: VAG/ IVC/ KIRLOSKAR/ TALIS/ AVK/GM/equivalent make
5
-
-
... More
Revamping of mechanical works of delivery side along with supply, retrofitting of 600mm Mild steel flap valve on the exit of delivery pipe line. The job also includes 2 coats of paints.
5
-
-
... More
Providing and fitting of M.S nuts and bolts (assorted sizes)
100
-
-
... More
"Servo voltage stabilizers: Providing, installation and testing of 500 KVA Servo Controlled Automatic Voltage stabilizer suitable for output voltage of 415 Volt +/-1%, 3 Ph, 50 Hz, with copper wound transformer (air/oil cooled) as per specifications mentioned in Annexure "B part II of III"
5
-
-
... More
Revamping of Main distribution panel by way of the following:
-
-
-
... More
"Incomer panel:
Supply, retrofitting, testing and commissioning of 2000A, 4-Pole ACB (Electrical Draw-out Type) with Microprocessor release having breaking capacity Icu of 50 kA at 415V along with complete control wiring for O/L, S/C, instantaneous, E/F protection release. The job also includes fitting of necessary devices for SCADA (Supervisary Control and Data Acquisition) compatibility."
2
-
-
... More
O/G Panel
Supply, retrofitting in panel O/G feeders, testing and commissioning of 800A, 3-Pole ACB (Electrical Draw-out Type) with Microprocessor release having breaking capacity Icu of 50 kA at 415V along with complete control wiring for O/L, S/C, instantaneous, E/F protection release. The job also includes fitting of necessary devices for SCADA (Supervisary Control and Data Acquisition) compatibility.
5
-
-
... More
Auxiliary panel
Supply, retrofitting in panel auxiliary feeder and testing and commissioning of 100A, TPN MCCB with Microprocessor release having breaking capacity Icu of 50 kA at 415V along with complete control wiring. The job also includes fitting of necessary devices for SCADA (Supervisary Control and Data Acquisition) compatibility.
1
-
-
... More
Complete replacement of panel metering and protection components as under:
LED Ammeter 3Ph with inbuilt selector switch - 96x96mm; flush mounting type; Class 1
7
-
-
... More
LED Voltmeter 3Ph with inbuilt selector switch - 96x96mm; flush mounting type; Class 1
7
-
-
... More
LED frequency meter Class 0.2
1
-
-
... More
Digital VAF + PF meter Class 1 96x96mm with RS485 port
5
-
-
... More
Current transformer 2000/5A - Class 1 - Burden 15VA
6
-
-
... More
Current transformer 800/5A - Class 1 - Burden 15VA
15
-
-
... More
Providing and fitting of LED phase indicator 22.5mm dia with surge protection
21
-
-
... More
Fault annunciation and alarm system comprising of alarm fascia panel with required number of fascia windows, one for each fault and flash type, complete with three push buttons for alarm acceptance resetting and testing & RS485 serial communication port. The individual panels shall be fitted with a common 4-inch size electronic panel hooter
5
-
-
... More
Spray painting with two coats of synthetic enamel paint of complete distribution panel with RAL 7035 shade (Siemens grey) including two undercoats of steel primer.
150
-
-
... More
Capacitor Bank:
Providing and installation of shunt capacitor panel in parallel with motors consisting of following:
· Capacitors of total rating 125kVAR
· Capacitor duty contractors
· MCCB 3P 400A
· LED indicators R Y B Suitable size unarmoured aluminium cable for connection.
5
-
-
... More
Cable:
-
-
-
... More
Supplying and laying of 3Cx240 sq.mm XLPE/ PVC insulated, unarmoured cable 1100V grade with ISI mark, solid/ stranded aluminium conductor of suitable lengths from O/G feeder – Voltage stabilizer – Starter – Motor. The job shall include providing and crimping of 240 sq.mm Aluminium lugs at all cable terminations/ connections.
300
-
-
... More
Supplying and laying of 1Cx400 sq.mm XLPE/ PVC insulated, armoured cable 1100V grade with ISI mark, solid/ stranded aluminium conductor of suitable lengths from L.T side of transformer to main control panel. The job shall include providing and crimping of 400 sq.mm Aluminium lugs at all cable terminations/ connections. The job also includes providing of L.T insulators, clamps and other allied works.
1040
-
-
... More
"Starter:
Supply, installation, testing & commissioning of 415 V Fully automatic Microprocessor based 300 H.P soft starter with built in bypass arrangement for pump control application as per specifications mentioned in Annexure "D".
5
-
-
... More
"Insulation mats
Providing and laying at site of high Voltage synthetic insulating mats as floor covering around Electro-mechanical gadgets for safe guarding life and limb of workmen due to possible leakage of current and short circuiting. The mats shall have the following characteristics/technical specifications:"
· Confirming to IS -15652-2006 with latest amendments
· Thickness- 3.0 mm
· Width – 1 Mtr
· Length 2 Mtr
· Anti- skid Type
· Material- PVC Elastomer
· Application: suitable for both AC and DC Electric installations.
· Class – C
· Colour- Black
15
-
-
... More
DC supply:
Providing, installation, testing and commissioning of DC supply including following main components:
i. Battery bank: One set 110V comprising of 55 nos. 2V SMF VRLA batteries of capacity 300AH at 10 hr rate discharge to 1.80 V per cell at 27 deg C, One set of inter tier connectors for batteries; modular stand and accessories. First filling of the acid and distrilled water shall be supplied at site.
ii. Battery charger: 01 no. industrial Float cum boost Battery Charger (30A/ 110V) mounted in a floor mounting type sheet steel cabinet, spray painted with proper ventillation. The battery charger shall have Single pole mains ON/ OFF switch, pilot lamp for mains supply ON, digital ammeter, DC under/ over voltage indicator, Battery reverse polarity indicator, mains fail indicator, overcharging protection, overload protection, I/P & battery overvoltage protection, undervoltage protection, battery low, RS485 port,etc. The charger must be complete with suitable main cord and heavy duty terminal blocks.
1
-
-
... More
Tools and other items:
-
-
-
... More
Ring Spanner set Size (6/7 to 30/32)
1
-
-
... More
Combination spanners 33 to 41
1
-
-
... More
Double ended Spanner Set of Size (12/13 to 40/41)
1
-
-
... More
Combination Pliers, 8 inch, 12 inch: (01 No. each)
1
-
-
... More
Long Nose Pliers 8 inch: (01 No.)
1
-
-
... More
Insulated Screw Driver 10 inch/ 8 Inch/ 6 Inch/ 4 inch: (01 No. Each)
1
-
-
... More
Hammer, 1.3 Kg and 3.6kg: (01 No each)
1
-
-
... More
Pipe Wrench heavy duty type: 300 mm, 450 mm & 600 mm: (01 No. each)
1
-
-
... More
Octagonal Chisels 200mm & 300mm : (01 No. each)
1
-
-
... More
Cantilever tool box 8in x 8in x 20in
1
-
-
... More
Bearing puller (sizes 8 to 10): (01 no. each)
1
-
-
... More
Spirit level 1.0 mm accuracy (900mm): 01 No.
1
-
-
... More
Bench vice fixed type (100mm opening)
1
-
-
... More
Digital Clamp Meter (1000A AC range/ 1000V/ LCD 7 segment display): 01 No. (Meco/Rishabh/ Fluke make)
1
-
-
... More
Vernier Calliper (Digital display 0-150mm): 01 No. (Freemans/ Mitutoyo/ Insize/ equivalent reputed)
1
-
-
... More
Aluminium ladder telescopic type 20ft
1
-
-
... More
Fire extinguishers (ABC type) 06 kg capacity as per IS 15683: 06 nos.
6
-
-
... More
Safety gadgets including helmets, gloves, shock proof shoes, etc.
12
-
-
... More
Earthing:
-
-
-
... More
Complete earthing of electrical motors, distribution panel, capacitor panel, voltage stabilizers, etc. with G.I earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and 20mm GI (medium class) watering pipe 2.7 meter long, funnel etc. with charcoal/ coke and salt as required.
4
-
-
... More
GI strip for earthing:
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
100
-
-
... More
Fabrication, erection of CGI shed of size 41ft x 9ft by way of below mentioned sub-works:
-
-
-
... More
Engagement of hydraulic excavator for cutting, filling and levelling etc.
8
-
-
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift up-to 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil
27.61
-
-
... More
Providing/filling of dry-stone soling tightly hand packed under foundation and under floors, including all carriages /head load upto site of work complete.
16.1
-
-
... More
Providing/ laying in position M7.5 cement concrete mix using graded stone aggregate including all carriages /head load upto site of work complete.
16.1
-
-
... More
Providing/laying in position M20 reinforced cement concrete mix using graded stone aggregate excluding cost of centering/shuttering etc, but including all carriages /head load upto site of work complete.
9.14
-
-
... More
Reinforcement for RCC work including straightening, cutting, bending & placing in position & binding complete (using TMT bars) including all carriages/ head load upto site of work complete @ 100kg/cum.
Weight = 9.14 x 100 = 914 kg
914
-
-
... More
Providing/laying in position M10 cement concrete mix in trenches using graded stone aggregate excluding cost of centering/shuttering etc, but including all carriages /head load upto site of work complete.
30.16
-
-
... More
Centering & shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns etc. for mass concrete. (12mm thick water proof ply board) including all the carriages /head load upto site of work complete.
110.72
-
-
... More
Providing, laying, watering levelling and compacting (GSB Nallah muck) with aggregate size not exceeding 90mm granular sub-base material to specified lines, grades, and density finished work to be measured including carriage of materials by mechanical transport from source of supply upto site of work also includes all leads, lifts, loading, unloading and stacking charges complete.
20.17
-
-
... More
Structural steel work welded in built up sections, trusses and framed work, doors and windows purlins including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
i. 12 Nos. Vertical Posts/ Pillars of hollow steel section 150x150x6
ii. Base plate and top plate of vertical posts fabricated from 10mm thick plate welded for pipe reinforcement
iii. 02 Nos pedestals to each vertical post for secure anchoring of posts fabricated out of ISA 50x50x5 2 ft long each.
iv. Cladding runners of ISA 50x50x5 = (4x40’) + 2(4x13’.6”) + (1x40’) = 308’
v Door frame & door (01 No.) of ISA 50x50x5 = {4x7’}
vi Window frame & windows (03 Nos.) of ISA 50x50x5 = {2x4’} each
vii. 06 No. of trusses fabricated of double ISA 50x50x5 having rafter of double ISA 65x65x5:-
Gusset plates fabricated out of 8mm thick plate
viii. Purlins fabricated out of ISMC75x40, 44’ long:- 12 Nos
ix. Cleats fabricated of ISA50x6, 0’.6” long:- 60 Nos
x. Soffits/ Chajja and Gables out of ISA25x4
5144
-
-
... More
Providing and fitting reputed make HI rib profiled sheets suitable for walls and roof of shed, 1000 to 1200mm overall width and total painted thickness of >= 0.5mm.
192.68
-
-
... More
Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
24.53
-
-
... More
Providing and fixing pre coated coloured MS eaves boarding 200mm wide 1.2mm thick including all necessary screws, J or L hooks, nuts with washers all as complete job. Length = (2 x 44’) + 4 x10’ = 128 rft = 39 mtrs
39
-
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing ball bearings and necessary 27.5cm long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part 1 and M.S top cover of required thickness for rolling shutters out of 80x1.20 mm M.S laths with 1.20mm thick top cover, including all the carriages /head load upto site of work complete.
14.86
-
-
... More
Providing and fixing by way of welding, drilling, nuts with bolts etc SS window hinges 3” long , door hinges 4” long, window latches, tower bolts, door lock/bolt of reputed make with locking arrangement, 90 mm padlocks (04 Nos), 70 mm padlock (03 Nos) or and other unforeseen items.
1
-
-
... More
Providing and laying Cement concrete flooring in M15 mix finished with a floating coat of neat cement including cement slurry 50 mm thick with 20 mm nominal size crushed stone aggregate, including all the carriages /head load upto site of work complete.
50.18
-
-
... More
Providing and applying 20 mm thick cement plaster in 1:4 mix with coarse sand to sides of plinth, ramp and staircase etc, including all the carriages /head load upto site of work complete.
31.82
-
-
... More
Facelifting and Electrification of pump house, its premises and store shed:
-
-
-
... More
Providing, fitting and installation of 50-watt LED flood lights inside and outside the pump house walls and wherever necessary as per requirement, comprising of brackets and necessary fixtures required for fitting the flood lights etc. Make: BAJAJ/Havells /Philips. (JETA Type or similar as per choice of Department) The job includes wiring of required size & S/W of required amperage.
12
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with piano type switch, phenol laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
20
-
-
... More
Wiring for heating point 2.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with switch socket combine, phenolic laminated sheet, suitable size MS box and earthing the point with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
5
-
-
... More
Fabrication, providing and fitting of Sub-main panel board of size 2’x2’. The frame of the board shall be fabricated out of 35x35x5mm M.S angle iron and fitted with ply sheet 12mm thick and face covered with ACC sheets. The panel board shall have suitable legs which shall have to be embedded into the pump house wall.
1
-
-
... More
Providing & fitting of 1200mm sweep ceiling fan. (Havells/ Orient/ Bajaj) with controller
1
-
-
... More
Providing & fitting of 300mm sweep metal exhaust fan. (Havells/ Orient/ Bajaj)
4
-
-
... More
LED 12-watt lamps (Havells/ Syska /Wipro/ Philips)
26
-
-
... More
Providing and fitting of service line for electrification of pump house and station premises. The service line shall be 2 Core-16 mm sq. Armoured Aluminium XLPE cable including suitable size & rating of thimbles to be drawn from Electric transformer sub-station/Main panel board to sub-main panel board or as per requirement.
90
-
-
... More
Complete earthing of the electrification of pump house and station premises with G.I. earth plate 600 mm X 600 mm X 6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. The job includes providing and laying 6SWG GI wire as earthing conductor.
1
-
-
... More
Providing and fitting of MCBs for electrical circuit with 100A as Incomer, 10A MCBs for lighting circuits of rooms, pump room, floodlighting, store shed, etc, 20A MCB for heating circuits. The MCBs shall be mounted on a MCB distribution box 12-way fitted on panel board for Central control of electrification of pump house and station premises. (MCB makes: Havells/ Legrand/ L&T/ Schneider/ equivalent)
1
-
-
... More
Providing and fitting of 415V 100 Amp. Capacity 4-pole change over switch along with allied wiring for the lighting system of the pump house. The changeover switch shall be of reputed make (Anchor/ Havells/ L&T/ SSK).
1
-
-
... More
Providing and fitting of 7.5 KVA fully automatic Oil-cooled voltage stabilizer ranging from 90-300 Volts giving output voltage of 200-230 Volts. The job also includes P/F of 12-volt DC battery 200 AH (Exide) along with 1100 VA sine wave Inverter (Microtek/ APC/ Sukam make) along with leads terminals and necessary wiring complete in all respects.
1
-
-
... More
Providing, fitting and installation of 50-watt LED Street lights outside the pump house on light poles wherever necessary as per requirement, comprising of brackets and necessary fixtures required for fitting the street lights etc. Make: BAJAJ/Havells /Philips. (JETA Type or similar as per choice of Department) The job includes wiring of required size & S/W of required amperage.
13
-
-
... More
Creation of 1.6 MVA H.T Sub-Station and revamping of existing 1.6 MVA H.T sub-station by way of:
-
-
-
... More
Providing of 11 mtr long M S Tubular poles (ST-410 SP-56) for creation of new sub-Station.
6
-
-
... More
Galvanized iron Channel /Angle/ Flat of various sizes including clamps for LA Set/ GO Set, Horn Gap with fitting.
600
-
-
... More
Supplying and erection of a set of 33 KV polymeric composite disc insulator 36KV, min falling load 70KN, Lighting impulse 170KV positive and 180KV Negative, creepage distance 900mm with fitting.
21
-
-
... More
Supplying and erection of 33 KV polymeric composite pin insulator 36KV, 10KN, lighting impulse170KV positive and 180KV Negative, creepage distance 900mm with fitting.
40
-
-
... More
Earthing of Substation --
Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239. GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body, G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts, refilled with earth enhancement materials and earth Chamber made of brick masonry with RCC slab cover.
6
-
-
... More
GI strip for earthing:
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
100
-
-
... More
Providing and fitting of 33 KV 400A 3-ph Gang operated Air Break Switch
2
-
-
... More
Supplying and erection of single piece nonlinear resistor type lightning arrestor suitable for 3 wire, 33 KV overhead lines with rated voltage 30 KV (rms) with a nominal discharge current rating of 10 KA (station class) and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required. The job also includes lightening arrestor for the pump house.
7
-
-
... More
Supply and erection of horn gap fuse set with post insulators suitable for 33 wire, 33 KV overhead lines..
2
-
-
... More
Providing and fitting of G.I Nuts & Bolts (assorted size)
50
-
-
... More
Providing and fixing of 'DANGER' plate of standard size for 440V/ 11KV/ 33KV.
20
-
-
... More
Cement bottoming of poles 1:2:4 mix as per Standards 0.66 cum /pole
6
-
-
... More
Spray painting with two coats of Red Oxide over the surfaces of sub-station poles, channels, and allied things etc.
10
-
-
... More
Spray painting with two coats of Aluminium Paint after applying the red oxide over the surfaces of sub-station poles, channels, and allied things etc.
10
-
-
... More
33KV CT/PT combined Unit, 3-phase, 50Hz, ONAN cooled, outdoor type. The combined unit, CTs and PTs specification as per requirement. Along with Metering cubicle for 3-phase 4 wire metering system suitable for 3 phase, HT, tri-vector meter with other allied materials like Copper wire, lugs, GI channels, earthing. as per specification approved by KPDCL.
1
-
-
... More
100 sq mm ACSR conductor along with all allied fittings including lugs, jumpers, binding tape, nuts & bolts etc as per requirement.
100
-
-
... More
Providing and fitting of aluminum bus bars of the size 100mm x 15mm having 20 meter entire length. The job includes cutting / fitting of the bus bar as per site requirement. Including drilling of holes of the dia 12mm (16 Nos.). The job also includes providing and fitting of 12mm dia bolts along with nuts and washers for fastening of bus bars to the bushes of 1600 KVA HT transformer.
81
-
-
... More
The job further included P/F of Bakelite plate of 25 mm thick of the size 1800mm x 1800mm. The job included cutting of 04 No. groves to the Bakelite plate for placing of the bus bars at equal spaces.
34
-
-
... More
Providing facilities to pump operators by way of:
-
-
-
... More
A. Floor Matting
150
-
-
... More
B. Commercial Cylinder security, cooktop 2-burner and allied.
1
-
-
... More
C. Blankets
3
-
-
... More
D. Bedding (mattress and quilt, pillow)
3
-
-
... More
E. Utensils and crockery item
1
-
-
... More
Construction of cement concrete H.T Transformer bed for resting 1.6MVA H.T tranasformer as:
-
-
-
... More
A. Earth work in bulk excavation by manual means over areas (Exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal; of excavated earth lead upto 50 meteers and lift upto 1.5 m, as directed by Engineer-in-Charge in all kinds of soil.
6.144
-
-
... More
B. Dumping stone including cost of stones in Horizontal on level
4.5
-
-
... More
C. Providing and laying in position specified grade of cement concrete including curing but excluding the cost of centring , shuttering. All works upto plinth level in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size)
1.024
-
-
... More
D. Providing and laying in position cement concrete of specified grade excluding cost of centring , shuttering all work upto plinth level (1:2:4) mix with 20 mm Aggregate size
11.064
-
-
... More
E. Centring and shuttering including strutting, propping etc. and removal of foam work for o=foundations including strutting, propping etc and removal of formwork
9.6
-
-
... More
Carriage of materials by mechanical transport:
A. Cement by an average lead of 10 KM
3.71
-
-
... More
B. Sand an average lead of 35 Kms
5.44
-
-
... More
C. Stone aggregate (20mm) by an average lead of 30 KM
10.87
-
-
... More
D. Stones by an average lead of 20Km
4.5
-
-
... More
Marval Stage 4th
Providing and replacement of deteriorated section of rising main by MS pipe 900mm ND 10mm thick, ERW. (Grade-FE 410)
60
-
-
... More
Supply, retrofitting, testing and commissioning of Reflux (Non-Return) valve of 900mm size PN 1.0 generally conforming to IS-5312 or equivalent international standard with latest amendments.
Material of construction: -
Body, cover, door, hinge: Ductile Iron Hinge pin: SS 304/ SS 316 Body ring, disc face: SS 410
Surface Protection: Electro static epoxy powder coating.
The job includes complete replacement of 100mm By-pass arrangement for NRV. Make: VAG/ IVC/ KIRLOSKAR/ TALIS/ AVK/ GM/equivalent make
1
-
-
... More
Revamping of mechanical works of delivery side along with supply, retrofitting of 900mm Mild steel flap valve on the exit of delivery pipe line. The job also includes 2 coats of paints.
1
-
-
... More
Providing and fitting of M.S nuts and bolts (assorted sizes)
100
-
-
... More
"Control Valves:
Supply, retrofitting, testing and commissioning of Sluice valve (SCADA compatible) of 600mm size, PN 1.0 conforming to IS 14846 or equivalent international standard of following specification: -" Material of construction: -
Body, Bonnet, Wedge: S.G Iron as per IS 1865
Spindle/Stem: Stainless Steel as per IS 6603
Stem nut, seat ring: High tensile brass
The job also includes providing and fitting of rubber gaskets for end connections.
Make: VAG/ IVC/ KIRLOSKAR/ TALIS/ AVK/GM/equivalent make
3
-
-
... More
Supply, retrofitting, testing and commissioning of DI Reflux Non-Return valve of 600mm size PN 1.0 generally conforming to IS-5312 or equivalent international standard with latest amendments. Material of construction: -
Body, cover, door, hinge: Ductile Iron Hinge pin: SS 304/ SS 316 Body ring, disc face: SS 410
Surface Protection: Electro static epoxy powder coating.
The job includes complete replacement of 100mm By-pass arrangement for NRV. Make: VAG/ IVC/ KIRLOSKAR/ TALIS/ AVK/ GM/equivalent make
3
-
-
... More
Pumping Unit (Brounth Kul):
Design, manufacture, supply, installation, testing and commissioning of standby pumping unit (Brounth Kul) along with all allied electro-mechanical equipments viz stabliser, FASD starter panel, 3-core copper cable from motor to starter of required size etc.
As per specifications mentioned in Annexure A part II of II
1
-
-
... More
Revamping of 10-Ton EOHT Crane by way of the following:
a. Complete revamping of electrical components including replacement of damaged control wiring, terminal blocks, p/f of pendant switch, etc. and replacement of crane duty contactors.
b. Complete servicing/replacement of crane motors, worm gear, etc.
c. Providing of U-clamps, bulldog grips, slings, etc as per requirement.
1
-
-
... More
"Servo voltage stabilizers:
Providing, installation and testing of 600 KVA Servo Controlled Automatic Voltage stabilizer suitable for output voltage of 415 Volt +/-1%, 3 Ph, 50 Hz, with copper wound transformer (air/oil cooled) as per specifications mentioned in Annexure "B" part I of III
3
-
-
... More
Revamping of Main distribution panel by way of the following:
-
-
-
... More
"Incomer panel
Supply, retrofitting, testing and commissioning of 2000A, 4-Pole ACB (Electrical Draw-out Type) with Microprocessor release having breaking capacity Icu of 50 kA at 415V along with complete control wiring for O/L, S/C, instantaneous, E/F protection release. The job also includes fitting of necessary devices for SCADA (Supervisary Control and Data Acquisition) compatibility."
1
-
-
... More
O/G Panel
Supply, retrofitting in panel O/G feeders, testing and commissioning of 800A, 3-Pole ACB (Electrical Draw-out Type) with Microprocessor release having breaking capacity Icu of 50 kA at 415V along with complete control wiring for O/L, S/C, instantaneous, E/F protection release. The job also includes fitting of necessary devices for SCADA (Supervisary Control and Data Acquisition) compatibility.
3
-
-
... More
Auxiliary panel
Supply, retrofitting in panel auxiliary feeder and testing and commissioning of 100A, TPN MCCB with Microprocessor release having breaking capacity Icu of 50 kA at 415V along with complete control wiring. The job also includes fitting of necessary devices for SCADA (Supervisary Control and Data Acquisition) compatibility.
1
-
-
... More
Complete replacement of panel metering and protection components as under:
LED Ammeter 3Ph with inbuilt selector switch - 96x96mm; flush mounting type; Class 1
8
-
-
... More
LED Voltmeter 3Ph with inbuilt selector switch - 96x96mm; flush mounting type; Class 1
8
-
-
... More
LED frequency meter Class 0.2
1
-
-
... More
Digital VAF + PF meter Class 1 96x96mm with RS485 port
3
-
-
... More
Current transformer 2000/5A - Class 1 - Burden 15VA
3
-
-
... More
Current transformer 800/5A - Class 1 - Burden 15VA
9
-
-
... More
Providing and fitting of LED phase indicator 22.5mm dia with surge protection
24
-
-
... More
Fault annunciation and alarm system comprising of alarm fascia panel with required number of fascia windows, one for each fault and flash type, complete with three push buttons for alarm acceptance resetting and testing & RS485 serial communication port. The individual panels shall be fitted with a common 4-inch size electronic panel hooter
3
-
-
... More
Spray painting with two coats of synthetic enamel paint of complete distribution panel with RAL 7035 shade (Siemens grey) including two undercoats of steel primer.
150
-
-
... More
Cable:
-
-
-
... More
Supplying and laying of 3Cx400 sq.mm XLPE insulated, armoured cable 1100V grade with ISI mark (IS 7098-I), solid/ stranded aluminium conductor of suitable lengths from O/G feeder – Voltage stabilizer – Starter – Motor. The job shall include providing and crimping of 400 sq.mm Aluminium lugs at all cable terminations/ connections.
120
-
-
... More
Supplying and laying of 1Cx400 sq.mm XLPE/ PVC insulated, armoured cable 1100V grade with ISI mark, solid/ stranded aluminium conductor of suitable lengths from L.T side of transformer to main control panel. The job shall include providing and crimping of 400 sq.mm Aluminium lugs at all cable terminations/ connections. The job also includes providing of L.T insulators, clamps and other allied works.
1040
-
-
... More
"Starter:
Supply, installation, testing & commissioning of 415 V Fully automatic Microprocessor based 375 H.P soft starter with built in bypass arrangement for pump control application as per specifications mentioned in Annexure "D".
3
-
-
... More
DC supply:
Providing, installation, testing and commissioning of DC supply including following main components:
i. Battery bank: One set 110V comprising of 55 nos. 2V SMF VRLA batteries of capacity 300AH at 10 hr rate discharge to 1.80 V per cell at 27 deg C, One set of inter tier connectors for batteries; modular stand and accessories. First filling of the acid and distrilled water shall be supplied at site.
ii. Battery charger: 01 no. industrial Float cum boost Battery Charger (30A/ 110V) mounted in a floor mounting type sheet steel cabinet, spray painted with proper ventillation. The battery charger shall have Single pole mains ON/ OFF switch, pilot lamp for mains supply ON, digital ammeter, DC under/ over voltage indicator, Battery reverse polarity indicator, mains fail indicator, overcharging protection, overload protection, I/P & battery overvoltage protection, undervoltage protection, battery low, RS485 port,etc. The charger must be complete with suitable main cord and heavy duty terminal blocks.
1
-
-
... More
Tools and other items:
-
-
-
... More
Ring Spanner set Size (6/7 to 30/32)
1
-
-
... More
Combination spanners 33 to 41
1
-
-
... More
Double ended Spanner Set of Size (12/13 to 40/41)
1
-
-
... More
Combination Pliers, 8 inch, 12 inch: (01 No. each)
1
-
-
... More
Long Nose Pliers 8 inch: (01 No.)
1
-
-
... More
Insulated Screw Driver 10 inch/ 8 Inch/ 6 Inch/ 4 inch: (01 No. Each)
1
-
-
... More
Hammer, 1.3 Kg and 3.6kg: (01 No each)
1
-
-
... More
Pipe Wrench heavy duty type: 300 mm, 450 mm & 600 mm: (01 No. each)
1
-
-
... More
Octagonal Chisels 200mm & 300mm : (01 No. each)
1
-
-
... More
Cantilever tool box 8in x 8in x 20in
1
-
-
... More
Bearing puller (sizes 8 to 10): (01 no. each)
1
-
-
... More
Spirit level 1.0 mm accuracy (900mm): 01 No.
1
-
-
... More
Bench vice fixed type (100mm opening)
1
-
-
... More
Vernier Calliper (Digital display 0-150mm): 01 No. (Freemans/ Mitutoyo/ Insize/ equivalent reputed)
1
-
-
... More
Fire extinguishers (ABC type) 06 kg capacity as per IS 15683: 06 nos.
6
-
-
... More
Safety gadgets including helmets, gloves, shock proof shoes, etc.
12
-
-
... More
300 A single phase IGBT welding machine with lead, holder, clamps, etc. & MS electrodes (10 kg 3.2mm)
1
-
-
... More
Earthing:
-
-
-
... More
Complete earthing of electrical motors, distribution panel, capacitor panel, voltage stabilizers, etc. with G.I earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and 20mm GI (medium class) watering pipe 2.7 meter long, funnel etc. with charcoal/ coke and salt as required.
4
-
-
... More
GI strip for earthing:
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
100
-
-
... More
Facelifting and Electrification of pump house, its premises and store shed:
-
-
-
... More
Providing, fitting and installation of 50-watt LED flood lights inside and outside the pump house walls and wherever necessary as per requirement, comprising of brackets and necessary fixtures required for fitting the flood lights etc. Make: BAJAJ/Havells /Philips. (JETA Type or similar as per choice of Department) The job includes wiring of required size & S/W of required amperage.
8
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with piano type switch, phenol laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
16
-
-
... More
Wiring for heating point 2.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with switch socket combine, phenolic laminated sheet, suitable size MS box and earthing the point with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
3
-
-
... More
Fabrication, providing and fitting of Sub-main panel board of size 2’x2’. The frame of the board shall be fabricated out of 35x35x5mm M.S angle iron and fitted with ply sheet 12mm thick and face covered with ACC sheets. The panel board shall have suitable legs which shall have to be embedded into the pump house wall.
1
-
-
... More
Providing & fitting of 1200mm sweep ceiling fan. (Havells/ Orient/ Bajaj) with controller
1
-
-
... More
Providing & fitting of 300mm sweep metal exhaust fan. (Havells/ Orient/ Bajaj)
3
-
-
... More
LED 12-watt lamps (Havells/ Syska /Wipro/ Philips)
20
-
-
... More
Providing and fitting of service line for electrification of pump house and station premises. The service line shall be 2 Core-16 mm sq. Armoured Aluminium XLPE cable including suitable size & rating of thimbles to be drawn from Electric transformer sub-station/Main panel board to sub-main panel board or as per requirement.
90
-
-
... More
Complete earthing of the electrification of pump house and station premises with G.I. earth plate 600 mm X 600 mm X 6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. The job includes providing and laying 6SWG GI wire as earthing conductor.
1
-
-
... More
Providing and fitting of MCBs for electrical circuit with 100A as Incomer, 10A MCBs for lighting circuits of rooms, pump room, floodlighting, store shed, etc, 20A MCB for heating circuits. The MCBs shall be mounted on a MCB distribution box 12-way fitted on panel board for Central control of electrification of pump house and station premises. (MCB makes: Havells/ Legrand/ L&T/ Schneider/ equivalent)
1
-
-
... More
Providing and fitting of 415V 100 Amp. Capacity 4-pole change over switch along with allied wiring for the lighting system of the pump house. The changeover switch shall be of reputed make (Anchor/ Havells/ L&T/ SSK).
1
-
-
... More
Providing and fitting of 7.5 KVA fully automatic Oil-cooled voltage stabilizer ranging from 90-300 Volts giving output voltage of 200-230 Volts. The job also includes P/F of 12-volt DC battery 200 AH (Exide) along with 1100 VA sine wave Inverter (Microtek/ APC/ Sukam make) along with leads terminals and necessary wiring complete in all respects.
1
-
-
... More
Providing, fitting and installation of 50-watt LED Street lights outside the pump house on light poles wherever necessary as per requirement, comprising of brackets and necessary fixtures required for fitting the street lights etc. Make: BAJAJ/Havells /Philips. (JETA Type or similar as per choice of Department) The job includes wiring of required size & S/W of required amperage.
12
-
-
... More
Complete Servicing of 1.6 MVA H.T transformer of Stage 4th by way of:
-
-
-
... More
Dismantling of 1.6 MVA HT Transformer by way of disconnecting of all HT and LT connections, opening of top lid, draining out of T. oil, and its safe placement for further refilling, taking out coils after removal of core assembly, etc. job also included detaching of core HV coils. The job also includes decarburizing laminated core. The core then firmly fixed with channeled frame to prevent noise and vibration. The job includes complete assembling of 1.6 MVA HT Transformer after cleaning of tank, fitting of coil assembly in the tank. Job further includes closing of the transformer lid by way of fitting of existing nuts/bolts and gaskets, insulators, etc. Refilling of t.oil upto required level in tank. Reconnecting of HT/LT connections and testing. The job also includes transportation/hiring of crane etc. for loading, unloading and stacking of various items including its dragging and rotation as per requirements at site.
1
-
-
... More
Replacement, providing/fitting of top cover gasket and gaskets of oil gauge. Replacement, Providing/ fitting of insulating materials such as Press Board, Cotton Tape, Kraft Paper. The job includes cost of all sundry items required.
1
-
-
... More
Replacement, Providing / Fitting of MS bolts and nuts, washers, spring washers of different size.
10
-
-
... More
Providing of transformer oil conforming to IS 335 (Preferred make: Power oil/ Indian oil Servo/HPCL)
1880
-
-
... More
Creation of 1.6 MVA H.T Sub-Station and revamping of existing 1.6 MVA H.T sub-station by way of:
-
-
-
... More
Providing of 11 mtr long M S Tubular poles (ST-410 SP-56) for creation of new sub-Station.
6
-
-
... More
Galvanized iron Channel /Angle/ Flat of various sizes including clamps for LA Set/ GO Set, Horn Gap with fitting.
600
-
-
... More
Supplying and erection of a set of 33 KV polymeric composite disc insulator 36KV, min falling load 70KN, Lighting impulse 170KV positive and 180KV Negative, creepage distance 900mm with fitting.
21
-
-
... More
Supplying and erection of 33 KV polymeric composite pin insulator 36KV, 10KN, lighting impulse170KV positive and 180KV Negative, creepage distance 900mm with fitting.
40
-
-
... More
Earthing of Substation --
Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239. GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body, G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts, refilled with earth enhancement materials and earth Chamber made of brick masonry with RCC slab cover.
6
-
-
... More
GI strip for earthing:
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
100
-
-
... More
Providing and fitting of 33 KV 400A 3-ph Gang operated Air Break Switch
2
-
-
... More
Supplying and erection of single piece nonlinear resistor type lightning arrestor suitable for 3 wire, 33 KV overhead lines with rated voltage 30 KV (rms) with a nominal discharge current rating of 10 KA (station class) and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required. The job also includes lightening arrestor for the pump house.
7
-
-
... More
Supply and erection of horn gap fuse set with post insulators suitable for 33 wire, 33 KV overhead lines..
2
-
-
... More
Providing and fitting of G.I Nuts & Bolts (assorted size)
50
-
-
... More
Providing and fixing of 'DANGER' plate of standard size for 440V/ 11KV/ 33KV.
20
-
-
... More
Cement bottoming of poles 1:2:4 mix as per Standards 0.66 cum /pole
6
-
-
... More
Spray painting with two coats of Red Oxide over the surfaces of sub-station poles, channels, and allied things etc.
10
-
-
... More
Spray painting with two coats of Aluminium Paint after applying the red oxide over the surfaces of sub-station poles, channels, and allied things etc.
10
-
-
... More
33KV CT/PT combined Unit, 3-phase, 50Hz, ONAN cooled, outdoor type. The combined unit, CTs and PTs specification as per requirement. Along with Metering cubicle for 3-phase 4 wire metering system suitable for 3 phase, HT, tri-vector meter with other allied materials like Copper wire, lugs, GI channels, earthing. as per specification approved by KPDCL.
2
-
-
... More
100 sq mm ACSR conductor along with all allied fittings including lugs, jumpers, binding tape, nuts & bolts etc as per requirement.
100
-
-
... More
Providing and fitting of aluminum bus bars of the size 100mm x 15mm having 40 meter entire length. The job includes cutting / fitting of the bus bar as per site requirement. Including drilling of holes of the dia 12mm (16 Nos.). The job also includes providing and fitting of 12mm dia bolts along with nuts and washers for fastening of bus bars to the bushes of 1600 KVA HT transformer.
162
-
-
... More
The job further included P/F of Bakelite plate of 25 mm thick of the size 1800mm x 1800mm. The job included cutting of 04 No. groves to the Bakelite plate for placing of the bus bars at equal spaces.
34
-
-
... More
Providing facilities to pump operators by way of:
-
-
-
... More
A. Floor Matting
150
-
-
... More
B. Commercial Cylinder security, cooktop 2-burner and allied.
1
-
-
... More
C. Blankets
3
-
-
... More
D. Bedding (mattress and quilt, pillow)
3
-
-
... More
E. Utensils and crockery item
1
-
-
... More
Construction of cement concrete H.T Transformer bed for resting 1.6MVA H.T tranasformer as:
-
-
-
... More
A. Earth work in bulk excavation by manual means over areas (Exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal; of excavated earth lead upto 50 meteers and lift upto 1.5 m, as directed by Engineer-in-Charge in all kinds of soil.
6.144
-
-
... More
B. Dumping stone including cost of stones in Horizontal on level
4.5
-
-
... More
C. Providing and laying in position specified grade of cement concrete including curing but excluding the cost of centring , shuttering. All works upto plinth level in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size)
1.024
-
-
... More
D. Providing and laying in position cement concrete of specified grade excluding cost of centring , shuttering all work upto plinth level (1:2:4) mix with 20 mm Aggregate size
11.064
-
-
... More
E. Centring and shuttering including strutting, propping etc. and removal of foam work for o=foundations including strutting, propping etc and removal of formwork
9.6
-
-
... More
Carriage of materials by mechanical transport:
A. Cement by an average lead of 10 KM
3.71
-
-
... More
B. Sand an average lead of 35 Kms
5.44
-
-
... More
C. Stone aggregate (20mm) by an average lead of 30 KM
10.87
-
-
... More
D. Stones by an average lead of 20Km
4.5
-
-
... More
Stabilization of 33KV Tap line by way of providing, Installation, testing and commissioning of the below items:
-
-
-
... More
11 Mtr. Long Pole (ST-410 SP56)
120
-
-
... More
GI V cross-arm with top Bracket including Clamp
4500
-
-
... More
100 mm2 ACSR Conductor
22
-
-
... More
PG Clamps for 100 mm2 ACSR Conductor
120
-
-
... More
33KV Polymeric composite Pin insulator 36KV, 10KN, Lighting Impulse 170 Positive and 180KV Negative, Creepage Distance 900mm
300
-
-
... More
33KV Polymeric composite Disc insulator 36KV,min falling load 70KN, Lighting Impulse 170 Positive and 180KV Negative, Creepage Distance 900mm with fitting
80
-
-
... More
Galvinized Nuts and Bolts
120
-
-
... More
Danger Plates with Clamps
120
-
-
... More
Anti-Climbing Device with Clamps
120
-
-
... More
Earthing complete by GI Pipe 40mm 3 mtr long through GI Strip 25x3 mm
120
-
-
... More
Red Oxide
120
-
-
... More
Aluminium Paint
120
-
-
... More
Cement Bottoming 1:2:4 mix as per Standards 0.66 cum/pole
120
-
-
... More
Stone Pad (300 mm x 300 mm x 75 mm)
120
-
-
... More
Aluminium Jointing Sleeves
9
-
-
... More
Galvanized Stay Set with 50x8 mm stay clamp, guy insulator (2Nos.), anchor plate (300x300x8) mm, nut bolts, 2 Nos turn-buckles, 1.8m long, 20mm diameter solid GS Stay rod & 7/4mm dia GI Stranded wire complete
8
-
-
... More
Guard netting
10
-
-
... More
33KV CT/PT Combined Unit, 3-Phase, 50Hz, ONAN cooled outdoor type. The combined unit, CTs and PTs specifications as per requirement. Alongwith metering cubicle for 3Phase 4 wire metering system suitable for 3 Phase, HT, tri-vector meter with other allied materials like Copper wire, Lugs, GI Channels, Earthings as per specifications approved by KPDCL
2
-
-
... More
SCADA Control Room & staff quarter for mechanical field staff:
-
-
-
... More
Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead up to 50 meters and lift up to 1.5 m, as directed by Engineer-in-Charge, in All kinds of soil.
101.66
-
-
... More
Dumping of dry stone soling excluding cost of stones
11.07
-
-
... More
Supply of stones
11.07
-
-
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Crushed.
18.23
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form work for:-
234.36
-
-
... More
Foundations, footings, bases for Column.
131.07
-
-
... More
Suspended floors, roofs, landings, balconies and access platforms.
58.4
-
-
... More
Edges of slabs and breaks in floors and walls, Under 20 cm wide
29.7
-
-
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)
11.86
-
-
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
46.95
-
-
... More
Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.
18.44
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
58.17
-
-
... More
Brick work with common burnt clay selected bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) including curing complete with (Non modular bricks)
2212.8
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more.
0.98
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) with Kiln seasoned and chemically treated hollock wood of
( 5’’ x 3’’)
11.7
-
-
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows of 35 mm fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Full Panelled Shutters with Kiln seasoned & chemically treated hollock wood.
9.45
-
-
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 5.0 mm thick glass pane (weighing not less than 12.50 kg/sqm).
9.45
-
-
... More
Providing and fixing wire gauze shutters 35 mm using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge with Kiln seasoned and selected planks of sheesham wood.
52
-
-
... More
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete.( 75x47x1.70 mm)
44
-
-
... More
Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete of 200x10 mm.
52
-
-
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodized (anodic coating not less than grade AC 10 as per IS : 1868) aluminum lever handles of approved quality with necessary screws etc. complete.
6
-
-
... More
Providing and fixing bright finished brass hard drawn hooks and eyes of 300 mm.
10
-
-
... More
Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
6
-
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.
135.6
-
-
... More
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
5072.06
-
-
... More
providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, 0.80 mm thick with zinc coating not less than 275 gram/m2.
249.87
-
-
... More
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete, 0.80 mm thick with zinc coating not less than 275 gram/m2.
45.79
-
-
... More
Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete, 1.25 mm thick with zinc coating not less than 350 gram/m2.
5.58
-
-
... More
Providing and fixing plained eaves boarding, 2nd class kail wood with 250x32 mm (nominal size ).
50.3
-
-
... More
12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand)
704.97
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
73.14
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete of Size of tile 600x600 mm.
119.84
-
-
... More
Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels ,Granite of any colour or shade .( 18 mm)
2.01
-
-
... More
Providing and fixing of PVC ( Super heavy with round moulding) panelling lining on wall including cost of nails, screws etc. all carriage upto the site, complete job.
782.16
-
-
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, 2 mm thick.
425.18
-
-
... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content, With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter.
425.18
-
-
... More
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm).
425.18
-
-
... More
Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).
67.34
-
-
... More
Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5sqm per liter per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant.
67.34
-
-
... More
Applying priming coat With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works.
7.15
-
-
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete, On steel work.
7.15
-
-
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick , Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 14587 .
23.78
-
-
... More
Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., complete, Overall width 65 mm.
15
-
-
... More
Providing and fixing sliding arrangement in racks/cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (the payment for C or E channel shall be made separately).
4
-
-
... More
Providing and fixing powder coated telescopic drawer channels 300mm long with necessary screws etc. complete as per directions of engineer-in-charge.
4
-
-
... More
Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters including fixing with necessary screws etc. complete, Triple strip (Vertical type).
15
-
-
... More
Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete.
10
-
-
... More
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete, 65mm
10
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
71.16
-
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters with 80x1.20 mm M.S. laths with 1.20 mm thick top cover. Complete Job.
3.25
-
-
... More
Providing and fixing ball bearing for rolling shutters.
2
-
-
... More
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., 25 mm diameter, wherever necessary complete
24
-
-
... More
Supplying and fixing in position the krewal curtains of superior quality and design , as specified and directed by Engineer-in-Charge.
12
-
-
... More
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.
126.8
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, Stainless Steel AISI- 304 (18/8) Orissa pattern W.C. pan of size 585x480mm with flush pipe and integrated type foot rests.
2
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required , White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.
2
-
-
... More
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
2
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete, Flexible pipe 32 mm dia.
3
-
-
... More
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge, 15 mm nominal dia.
3
-
-
... More
Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
2
-
-
... More
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
5
-
-
... More
Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.
3
-
-
... More
Providing and fixing PTMT grating of approved quality and colour, 150 mm nominal size square 100 mm diameter of the inner hinged round grating.
4
-
-
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour, 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.
2
-
-
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.
1
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required, 510x1040mm bowl depth 250mm.
1
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
-
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. 20 mm dia. nominal bore, medium.
45
-
-
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work), 20 mm nominal bore.
10
-
-
... More
Providing and fixing 20 mm dia G.I. Elbows
10
-
-
... More
Providing and fixing 20 mm dia G.I. plugs
4
-
-
... More
Providing and fixing 20 mm G.I. Tee (equal)
8
-
-
... More
Providing and fixing 20 mm dia G.I. crosses
3
-
-
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete, 20 mm nominal bore.
2
-
-
... More
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
3
-
-
... More
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
15
-
-
... More
Providing and fixing PVC Sewage Pipe for carriage of sewage of approved brand and specifications (4" & 3") .
35
-
-
... More
Providing and fixing of sanitary fittings and pipe especially like C.P tubes, bends, collar, Cowel, etc. A). PVC Connections for wash basin, Cistern, Geyser etc
12
-
-
... More
B). PVC plain bend 110 mm
10
-
-
... More
C). PVC plain bend 90 mm
10
-
-
... More
D) . PVC Collar 110 mm
10
-
-
... More
E) PVC Collar 90 mm
10
-
-
... More
F). PVC Floor Trap
4
-
-
... More
G). PVC P Trap
2
-
-
... More
H). PVC Door bend
6
-
-
... More
I). PVC Cowel
1
-
-
... More
J) PVC Tee
5
-
-
... More
Making soak pit of cement concrete rings of each 900 mm diameter and 200 mm height 3.0 meter deep with cement concrete lid over top and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design; as directed by engineer in charge.
1
-
-
... More
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
2
-
-
... More
Providing and fixing 25 Ltr water heater geyser of approved make like , Jaquar, venus, jupiton, Racold or equivalent make including all necessary fittings complete Job.
3
-
-
... More
Providing and fixing of lighting points, 1 lighting point should include wiring for lighting points in 1.5 square mm PVC installed copper wire of approved brand (Havells, Anchor, Finolex) and 2.5 Square mm PVC installed multi standard copper wire for lighting sub mains 6 AMP one way modular switch of approved brand (Havells, GM, Anchor) 2mm thick PVC Conduit / Channels with bends and junction boxes etc 6AMP. Spol DB for housing MCB and Hylam sheets with wooden boxes recessed involved with all accessories of approved brand i.e 15 watts lED Light, also shall include inverter wiring complete Job.
22
-
-
... More
Providing and fixing of heating points, 1 heating poing should include wiring for heating points in 4 square mm PVC installed copper wire and 4 Square mm PVC installed multi standard copper wire of approved brand (Havells, Anchor, FiNolex) for heating sub mains 16 AMP one way modular switch of approved brand (Havells, GM, Anchor) 2mm thick PVC Conduit/Channels with bends and junciton boxes etc 6AMP. Spol DB for housing MCB and Hylam sheets with wooden boxes recessed involved with all accessories of approved brand complete Job.
8
-
-
... More
Providing and fixing of fan point including the fan (Ceiling / Exhaust)
One Fan point shall include wiring for fan points in 1.5 Sqmm PVC insulated multi strand copper wire of approved brand (Havells, Anchor, FiNolex); 1200mm ceiling fan / 225mm exhaust fan of approved brand (Havells, Orient, Bajaj) with ceiling roses and PVC square block, 350 watts junction boxes etc, fan control switch, 6 AMP Spol MCB, 10 AMP DB MCB, 2 way DB for housing MCB for lighting circuits and hylam sheets with wooden boxes recessed involves with accessories of approved brand, complete job.
2
-
-
... More
Supply and installation of Exide UPS/Inverter 2.5 KVA along with Exide double battery 200 AH.
1
-
-
... More
Supply and Installation of 7 KVA step up transformer, connecting the mains of reputed make, as per the directions of engineer in charge. (Non Servo type).
1
-
-
... More
Supply, Installation, Testing and commissioning of Air Conditioning System of 1.5 T Capacity with all accessories (Stabilizer, Conduiting, Compressor unit wall stand) of make Diakin, Bluestar, Voltas, Haier, including making requisite holes in the wall and making them good after installation, all complete as specified and directed by engineer in charge.
1
-
-
... More
Sofa 2 Seater Fabric Over all Dimension 1500mm X 900mm X 820mm understructure is made up of pinewood members cross sections 22x64mm, 34x64mm & 16x35mm,Seat is made of PU foam with density 28 kg/m3 with a top layer of supersoft PU foam with density 32 kg/m3. Non woven fabric upholstry is stapled on the seat structure of frame.
2
-
-
... More
Supplying and placing in position the center table (4 feet x 2 feet) made up of solid wood with toughened glass top, as specified and directed by engineer in charge.
2
-
-
... More
Supplying and fixing in position the L-Shaped Executive Office Table of superior quality and design, as specified and directed by engineer in charge.
1
-
-
... More
Providing of high back revolving Officer’s chair with head rest.
1
-
-
... More
Providing of Cushioned office chairs
6
-
-
... More
Supplying and placing in position the steel almirah medium size made up of steel with lock arrangement, shelving, doors, of approved brand as specified and directed by engineer in charge.
1
-
-
... More
Providing and placing in position wall to wall matting of superior quality.
417
-
-
... More
Supply of power cable wire from main supply line upto the structure
45
-
-
... More
Carriage of materials by means of mechanical transport from source upto actual site of work including loading, unloading and stacking of materials at site. A. Stone avg. lead of 7 km
11.07
-
-
... More
B. 40 mm aggregate avg. lead of 7 km
16.22
-
-
... More
C. 20 mm aggregate avg. lead of 7 km
53.21
-
-
... More
D. Sand avg. lead of 7 km
91.18
-
-
... More
E. Cement avg. lead of 6 km.
29.56
-
-
... More
F. Brick avg. lead of 5 Km
29085
-
-
... More
G. Steel average lead of 6 km
7.28
-
-
... More
Design, Supply, Installation, testing and commissioning of SCADA system for compelete Marval Lift Irrigation scheme including stage 1,2,3 & 4 by way of providing installation testing and commissioning of the below items:
-
-
-
... More
Level Transmitter for Sump Compatible to transmit Sump level to PLC system
4
-
-
... More
Power analyzer interfacing to PLC Panel
4
-
-
... More
Pressure Transmitter for Individual and Common Delivery header, compatible to transmit Pressure to PLC System
18
-
-
... More
Non redundant PLC system with touch screen HMI
4
-
-
... More
Control Panel duly wired with above non redundant PLC & other accessories
4
-
-
... More
GSM Modem (for data transmission from Pumping station to Main SCADA System)
4
-
-
... More
PSTN Modem (for data transmission from Pumping station to Main SCADA System)
4
-
-
... More
Instrumentation & Communication Cable as per Site Requirement
1
-
-
... More
Broadband Lines from broadband service providers for communication.
1
-
-
... More
VSAT at Individual Pumping Station.
4
-
-
... More
GSM Communication for Individual Pumping Station
1
-
-
... More
Non redundant UPS System for each Pumping Station
4
-
-
... More
4 Nos. level switches for each Pumping Station.
4
-
-
... More
CCTV 08 Ch NVR system with 5MP camera with 01 no. PTZ-10X and 07 no. IP cameras at each pump station with communication to Central SCADA.
4
-
-
... More
Actuators for following size Cast Iron Double Flanged Valves in Existing Pumping Stations. The Scope includes supply of gearbox assembly for operating through actuators:
Actuator for 600mm
10
-
-
... More
Central non redundant SCADA system including hardware, server, Engineering Station, Operator Station & Monitoring Screen as per technical specifications mentioned in Annexure E part I
1
-
-
... More
Ultrasonic insertion type Flowmeters: >=900mm
9
-
-
... More
Ultrasonic insertion type Flowmeters: 600mm
9
-
-
... More
Transducers for motors/ RTDs
24
-
-
... More
Aircon for Scada control room as per technical specifications mentioned in Annexure E part II
2
-
-
... More
Comprehensive operation and annual Maintenance of SCADA System with minimum 05 No. of experienced Engineers / Technicians (01 Mechanical, 02 Electrical & 02 Electronics) for 24 X 7 Maintenance @ 06 months a year for a minimum of 4 irrigation seasons inclusive of replacement of any instrument if required during the said period which shall commence after issuance of Operational Acceptance Certificate and start of warranty Period:-
a. For Main Control Centre : 01 No.
b. For Stations : 04 No’s
The job also includes arranging & managing all inter-departmental regulations norms with internet service providers for effective and smooth functioning of SCADA System.
4
-
-
... More
Civil Works for Revamping/ Modernisation of Marval Lift Irrigation Scheme:
-
-
-
... More
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :
10218.32
-
-
... More
Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material : All kinds of soil :
1825.03
-
-
... More
Extra for every additional lift (2nd lift) of 1.5 m or part thereof in excavation/banking excavated or stacked material, All kinds of soil
263.01
-
-
... More
Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :
11208.16
-
-
... More
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :(1 meter from cutting edge)
11.03
-
-
... More
Extra for earth work in excavation in or under water/liquid mud incl.pumping out water as required (2m below water level @40%)
526.02
-
-
... More
Extra for earth work in excavation in or under water/liquid mud incl.pumping out water as required (1m below water level @20%)
275.66
-
-
... More
Supplying and stacking at site.
Good Earth
4580.86
-
-
... More
-----------------------
-
-
-
... More
Filling empty cement bags with sand/ earth; including cost of sewing and strings; excluding cost of bags and earth / sand
17102
-
-
... More
Placing of earth filled EC bags In Dry
17102
-
-
... More
Add cost of EC bags .
17102
-
-
... More
Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared.
2246.4
-
-
... More
----------------------
-
-
-
... More
Silt clearance from canals. Inclusive of initial lead and lift ( 50m & 1.5m respectively )
Dry
888.14
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%