Public Works Department Tender
... More
The PWD has issued a formal invitation for competitive bids for the Public Works Department project, for C.o Govt. Senior Secondary School Building At Rakchham Distt. Kinnaur Sh C.o Building Portion I.c Ws And S.i Septic Tank And Rain Water Harvesting Tank Etc. in Kinnaur, Himachal Pradesh, with an estimated contract value of Rs. 43,03,413. The bid opening date for this tender is 30-07-2019 and the last date for bid submission is 09-08-2019. Interested bidders for Public Works Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Costs
EMD
₹ 72,100Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_PWD_30546_2Bid Award Id
ViewTender No
PW-BHNR-EA-Tender /2019- 4796-4801 dated 18.07.201Tender Authority
Public Works Department ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing under layer for plinth protection of 75mm (seventy five milimetre) thick (un-consolidated) bed of dry brick/ stone aggregate 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge
60.6
-
-
... More
Providing and fixing aluminium tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etc. completed 250x10mm. (two hundred fifty into ten milimetre) including carriage of material by all modes of transportation within all leads and lifts as per PWD specification and as per the direction of Engineer-in-charge.
6
-
-
... More
Excavation in drain and chnnel in earth work in all height and depths in all kinds of soil, including saturated soils comparising of pick work, jumper work, blasting work both in soft and hard rock with chiselling and wedging out of rock ( where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, lvels as shown on the drawing and directed by the Engineer-in-cvharge at site., according to the HP.PWD specification of 1990 (One thousand nine hundred ninety) volume-I (One) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (to be arranged by the contractor) as per satisfaction of Engineer-in-charge through all modes of transporation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineris, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). All useful material such as stones, shingles aggregate ans lates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used/removed as per the direction of Engineer-in-charge. Any loss to the public and private property during the course fo exectuion all disposal of serviceable and unserviceable materials shall be absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.
16.38
-
-
... More
Applying Birla white wallcare putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete for all floors in all heights including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge
191.19
-
-
... More
Providing and laying cement concrete 1:4:8 (One cement isto four sand isto eight crushed stone aggregate 40mm.(forty milimetre) nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth in breast and retaining walls etc. within all leads and lifts and as per PWD specification and as per entire satisfaction and direction of Engineer-in-charge.
3.51
-
-
... More
Sypplying and stacking of sand for sand encasing including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge
9.21
-
-
... More
Providing and fixing vitreous China bowl pattern flat back type of size 430x260x350mm. urinal including connection the urinal No. 60002 of Hindware in whtie shade with waste pipe by means of white lead mixed with chopped hemp ( waste pipe to be measured and paid separetly) including carriage of material through all modes of transporation within all leads and lifts and as per HP.PWD. specification and as per direction of Engineer-in-Charge.
2
-
-
... More
Providing and laying Dr. fixit fastflax which is a two coats compo. PMCC etc. over slab where water tank is required to install including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge
52.89
-
-
... More
Providing and fixing Ist class Kail wood 20mm. (twenty milimetre) thick wooden plank ceiling with planks over lapping each other and jointed with wood screws (frame work to be paid for separately) including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge.
102.81
-
-
... More
Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etc. completed 125mm. (one hundred and twenty five milimetre) including carriage of material by all modes of transportation within all leads and lifts as per PWD specification and as per the direction of Engineer-in-charge.
12
-
-
... More
Supplying cast iron cover without frame for manholes frame of internal dimension 500 mm. internal diameter C.I. cover (medium duty) the weight of cover to be not less than 58kg. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge.
2
-
-
... More
Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete for all floors in all heights including carriage with in all leads and lifts through all modes and as per HP.PWD. specifications and as per direction of Engineer-in-charge.
191.19
-
-
... More
50 mm (fifty milimetre)thick cement concrete flooring 1:2:4 (1 cement: 2 sand :4 stone aggregate of size 20 mm nominal size) laid over base concrete and finished with a floating coat of neat cement (base concrete to be paid saparately) including carriage of material by all modes of transportation within all leads and lifts as per PWD specification and as per the direction of Engineer-in-charge.
5.52
-
-
... More
Supplying and fixing cast iron cover 300x300mm. (three hundred into three hundred milimetre) with frame for gully trap (standard pattern) the weight of cover not less tan 4.53 kg. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge.
82
-
-
... More
Providing and fixing anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screws etc. complete 2500x16mm. (two hundred fifty into sixteen milimetre) including carriage of material by all modes of transportation within all leads and lifts as per PWD specification and as per the direction of Engineer-in-charge.
8
-
-
... More
Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with CP brass screws and washers including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge
3
-
-
... More
Providing and fixing 90mm. (ninety milimetre) dia high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge
100
-
-
... More
Kota stone slab 25 mm thick in risers of steps, skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete including carriage of material through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.
18.17
-
-
... More
Providing and laying 0.60mm )zero decimal six zero milimetre) thick prepainted steel sheet roofing with hot dip metallic zinc coated sheets with the top coat of regular modified polyster (RNP) organic coating 20 microns over 5 microns primer coating to back coat of polyester of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6 mm diameter with prepainted limpet and rubber washer complete with all accessories including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge
312.15
-
-
... More
Providing and fixing 15mm. (fifteen milimetre) nominal bore to wall ceiling and floor galvanized mild steel tubes (medium grade) tube fittings and clamps including making good the walls, ceiling and floor including carriage of material through all modes of transportation within all leads and lifts and as per HP.PWD. specification and as per direction of Engineer-in-Charge.
100
-
-
... More
6mm thick cement plaster to ceiling in cement mortar 1:3 (1 cement :3 sand) for all floors including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge
186.78
-
-
... More
20mm (twenty milimetre) thick cement plaster in single coat on fair side of brick masonry/stone masonry/concrete walls for interior plastering for all floors in all heights including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30 cm in girth and finished even and smooth in cement mortar 1:4 (One cement isto four sand) including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge.
30.07
-
-
... More
Providing and fixing 32mm. (thirty two milimetre) dia C.P. brass waste for wash basin or sink including carriage of material through all modes of transporation within all leads and lifts and as per HP.PWD. specification and as per direction of Engineer-in-Charge.
3
-
-
... More
Providing form work with steel plates 3.15mm.(Three decimal fifteen milimetre) thick welded with angle iron in frame 30x30x5mm.(Thirty into thirty into five milimetre)so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens and ballies, in all heights and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars, posts and struts square, rectangular or polygonal in plan including carriage of material through all modes of transportation within all leads and lifts and as per PWD specifications and as per entire satisfaction and direction of Engineer-in-charge.
143.85
-
-
... More
Providing and laying mirror polish kota stone slab flooring 20 mm (twenty milimetre) (average) thick base of cement mortar 1:4 (1 cement: 4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete including carriage of material through all modes of transportation with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.
179.27
-
-
... More
Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I or M.S brackets painted white including cutting holes and making good the same but excluding fittings Flat back (550mm x 400mm) No. 10001 in white shade of Hindware including carriage of material through all modes of transporation within all leads and lifts and as per HP.PWD. specification and as per direction of Engineer-in-Charge.
3
-
-
... More
Providing and laying reinforcedcement concrete 1:1½:3 ( One cement one and half sand isto three crushed stone aggregate 20mm. (twenty milimetre) nominal size mechanically mixed and vibrated and curing completed excluding cost of form work and reinforcement for reinforced concrete work in stair cases (except spiral stair case) excluding landing but including preparing of trhe surface and finishing of nosing in super structure for all floors including carriage of material through all modes of transporation within all leads and lifts as per PWD specification and as per the entire satisfaction direction of the Engineer-in-charge.
1.52
-
-
... More
Providing 2nd class Kail wood work in frames of false ceiling partitions etc. sawn and put up in position including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge.
0.57
-
-
... More
Providing and fixing 110mm dia PVC “P” or “S” trap for water closet (squatting Pan)ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc’. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge
4
-
-
... More
15mm (fifiteen milimetre) thick cement plaster in single coat on rough side of brick masonry/stone masonry/concrete walls for interior plastering for all floors in all heights including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (One cement isto six sand) including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge
442.18
-
-
... More
40 mm (forty milimetre) thick cement concrete flooring 1:2:4 (1 cement: 2 sand :4 stone aggregate of size 20 mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of material by all modes of transportation within all leads and lifts as per PWD specification and as per the direction of Engineer-in-charge.
102.81
-
-
... More
Providing and fixing 110mm x90mm. dia PVC reducer ISIU marked including jointing with approved adhesive etc. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge
4
-
-
... More
Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. flats, square or round bars with round headed bolts and nuts or by screws plain grills including carriage of material through all modes of transporation within all leads and lifts as per PWD specification and as per the entire satisfaction and direction of Engineer-in-charge. charge.
471.4
-
-
... More
Providing and laying reinforced cement concrete 1:1½:3 ( One cement one and half sand isto three crushed stone aggregate 20mm. (twenty milimetre) nominal size mechanically mixed and vibrated and curing completed excluding cost of form work and reinforcement for reinforced concrete work in suspended floors roofs, landings and shelves and their supports, balcones, beams, girders, breasumers and cantilvers in superstructure for all floors including carriage of material through all modes of transporation within all leads and lifts as per PWD specification and as per the entire satisfaction direction of the Engineer-in-charge.
62.67
-
-
... More
20mm (twenty milimetre) thick cement plaster in two coats backing coat 15mm. and finishing coat 5mm. thick on rough sides of brick and stone masoinry walls for interior plastering upto all floor level in including arrises internal rounded angles chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:4 (One cement isto four sand) including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge.
118.76
-
-
... More
15mm (fifiteen milimetre) thick cement plaster in single coat on fair side of brick masonry/stone masonry/concrete walls for interior plastering for all floors in all heights including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (One cement isto six sand) including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge
334.44
-
-
... More
Providing and fixing 2nd class deodar wood work in frames of doors, windows, clerestorey, windows and other frame wrought framed and fixed in position for all floors including carriage of material by all modes of transportation within all leads and lifts as per PWD specification and as per the direction of Engineer-in-charge.
2.26
-
-
... More
Providing form work with steel plates 3.15mm.(Three decimal fifteen milimetre) thick welded with angle iron in frame 30x30x5mm.(Thirty into thirty into five milimetre)so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens and ballies, in all heights and removal of the same for in-situ reinforced concrete and plain concrete work in foundations, footings, bases of columns etc. and mass concrete including carriage of materials thorugh all modes of transportation within all leads and lifts and as per PWD specifciation and as per entire satisfaction and direction of Engineer-in-charge.
111.96
-
-
... More
Rulled pointing on coursed or Ashlar stone masonry concrete block walling with cement mortor 1:4 (One cement isto four sand) including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge.
64.76
-
-
... More
Providing and fixing 15mm dia. brass bib tap (superior or heavy type) including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge
4
-
-
... More
Providing form work with steel plates 3.15mm.(Three decimal fifteen milimetre) thick welded with angle iron in frame 30x30x5mm.(Thirty into thirty into five milimetre)so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens and ballies, in all heights and removal of the same for in-situ reinforced concrete and plain concrete work in stair caases with slopping or stepped soffits excluding landing, beams, cantilevers, girders and lintels upto all floor levels including carriage of material through all modes of transportation within all leads and lifts and as per PWD specifications and as per entire satisfaction and direction of Engineer-in-charge.
9
-
-
... More
Providing and laying 30cm. (thirty centimetre) thick composit stone masonry with stone facing of chisel dressed stones one line dressed in cement mortar 1:6 (One cement isto six sand) and concrete backing with cement concrete 1:3:6 (One cement isto three sand isto six crushed stone aggregate 20mm.(twenty milimetre) nominal size) on inner face of walls including centring,shuttering and propping complete for all floor including carriage of material through all modes of transporation within all leads and lifts as per PWD specification and as per the entire satisfaction and direction of Engineer-in-charge. charge.
64.76
-
-
... More
Providing and laying brick work using common burnt clay building bricks in super structure for all floors in all heights using second class bricks in cement mortar 1:6 (One cement isto six sand) and curing complete including carriage of material through all modes of transporation within all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge
45.36
-
-
... More
Providing and laying half brick masonry in common burnt clay building bricks in super structure for all floor in all heights using 2nd class bricks in cement mortar 1:4 (One cement isto four sand) curing complete including carriage of material through all modes of transporation within all leads and lifts as per PWD specification and as per the entire satisfaction and direction of Engineer-in-charge.
17.66
-
-
... More
Providing and fixing 2nd class deoar wood panalled glazed or panalled and glazed shutters for doors windows and clerestory windows 40mm. (forty milimetre) thick including black enamelled iron butt hinges with necessary screws for all floors including carriage of material by all modes of transportation within all leads and lifts as per PWD specification and as per the direction of Engineer-in-charge.
68.71
-
-
... More
Providing Tor steel reinforcement for R.C.C.work including bending,binding and placing in position complete upto in super structrue for all floors in all heights including carriage of material through all modes of transporation within all leads and lifts as per PWD specification and as per the entire satisfaction and direction of the Engineer-in-charge.
13443
-
-
... More
Providing and fixing 75mm. x 60mm. (seventy five milimetre into sixty milimetre) rounded hand rails in straight length complete in 2nd class deodar wood including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge.
22.2
-
-
... More
Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil grease ,dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink for all floors including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge
265.47
-
-
... More
Providing and laying boulder filling dry hand packed tightly in ground floor including carriage of material through all modes of transporation within all leads and lifts as per PWD specification and as per the entire satisfaction and direction of Engineer-in-charge. charge.
29.17
-
-
... More
Wall painting (one coat) with plasting emulsion paint of approved brand and manufacture on decorated wall surfaces to give an even shade including thoroughly brushing the surface clean of all dirt, grease, loose pieces of scale and extra over item for painging with plasting emulsion paint of approved brand and manufacture on ceiling and /or sloping roofs for all floors in all heights including carriage of material within all leads and lifts and as per HP.PWD., specifications and as per direction of Engineer-in-Charge.
186.78
-
-
... More
Providing and fixing aluminium tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etc. completed 200x10mm. (two hundred into ten milimetre) including carriage of material by all modes of transportation within all leads and lifts as per PWD specification and as per the direction of Engineer-in-charge.
156
-
-
... More
Excavation in foundation and trenches in earth work in all height and depths in all kinds of soil, including saturated soils comparising of pick work, jumper work, blasting work both in soft and hard rock with chiselling and wedging out of rock ( where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, lvels as shown on the drawing and directed by the Engineer-in-cvharge at site., according to the HP.PWD specification of 1990 (One thousand nine hundred ninety) volume-I (One) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (to be arranged by the contractor) as per satisfaction of Engineer-in-charge through all modes of transporation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineris, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). All useful material such as stones, shingles aggregate ans lates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used/removed as per the direction of Engineer-in-charge. Any loss to the public and private property during the course fo exectuion all disposal of serviceable and unserviceable materials shall be absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.
312.36
-
-
... More
Providing and fixing prelaminated board bwp phenol bonded exterior/interior grade both side 12mm. thick for all floors including carriage of material by all modes of transportation within all leads and lifts as per PWD specification and as per the direction of Engineer-in-charge.
9.3
-
-
... More
Providing and laying cement concrete 1:6:12(One cement isto six sand isto twelve graded crushed stone aggregate 40mm.(Forty milimetre)nominal size)and curing complete including the cost of centring and shuttering in foundation and plinth complete as per drawing and technical specification clause 802,803,1202 and 1203 including carriage of material through all modes of transportation within all leads and lifts and as per PWD specifications and as per entire satisfaction and direction of Engineer-in-charge.
33.22
-
-
... More
Providing and fixing 1000 litres capacity PVC water storage tank of ISI:12701 marked , G.I. inlet and out let connection , 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hositing up to all heights above ground level including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge
1
-
-
... More
filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including carriage of material through all modes of transportation with in all leads and lifts and as per PWD specification and as per direction of Engineer-in-charge.
14.58
-
-
... More
Providing form work with steel plates 3.15mm.(Three decimal fifteen milimetre) thick welded with angle iron in frame 30x30x5mm.(Thirty into thirty into five milimetre)so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens and ballies, in all heights and removal of the same for in-situ reinforced cocnrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. upto 200mm. (two hundred milimetre) in thickness including carriage of material through all modes of transportation within all leads and lifts and as per PWD specifications and as per entire satisfaction and direction of Engineer-in-charge.
299.98
-
-
... More
Providing steel work welded in built up sections, truesses and framed work, including cutting hoisting, fixing in position and applying a priming coat of red lead paint in gratings framed guard bars, ladders, railing, brackets and similar works including carriage of materials through all modes of transporation within all leads and lifts as per PWD specification and as per the entire satisfaction and direction of Engineer-in-charge.
4.52
-
-
... More
Providing and fixing 15mm (fifteen milimetre) nominal bore brass full way valve with wheel including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge.
2
-
-
... More
Polishing two coats with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a cot of wood filler for all floors including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge
102.81
-
-
... More
Providing and fixing 15 cm. wide 45 cm. overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design. 0.63 mm thick sheet complete with all accessories including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge
60.6
-
-
... More
Providing and fixing 580 mm (five hundred and eighty milimetre) viterous China wash down water closet No. 20004 size 58x40cm. Of HINDWARE in white shade Orissa pattern squatting pan (indian type W.C pan) (earthwork, bed concrete foot rest and trap to be measured and paid separately including carriage of material through all modes of transporation within all leads and lifts and as per HP.PWD. specification and as per direction of Engineer-in-Charge.
4
-
-
... More
Providing form work with steel plates 3.15mm.(Three decimal fifteen milimetre) thick welded with angle iron in frame 30x30x5mm.(Thirty into thirty into five milimetre)so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens and ballies, in all heights and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls (any thickness) partitions and the like includind attached pillasters buttresses, plinth and string courses and the like including carriage of material through all modes of transportation within all leads and lifts and as per PWD specifications and as per entire satisfaction and direction of Engineer-in-charge.
75.55
-
-
... More
Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etc. completed 100mm. (one hundred milimetre) including carriage of material by all modes of transportation within all leads and lifts as per PWD specification and as per the direction of Engineer-in-charge.
162
-
-
... More
Constructing course rubble hammer dressed “U” shape open surface drain with side walls 15x23cm in cement mortar 1:6 (1cement :6sand) and inside plastering with cement plaster 1:3(1cement:3sand) including e`arth work and laying 10cm cement concrete in 1:5:10 (1cement :10 crushed stone aggregate 40mm nominal size) and 7.5 cm cement concrete 1:2:4 (1cement: 2sand: 4 crushed stone aggregate 20mm nominal size) and finished with a floating coat of neat cement complete as per standard design. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge
60.6
-
-
... More
Sypplying and stacking of broken/crushed stone aggregate chipping of hard stone of 40mm. size including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge
3.77
-
-
... More
Providing steel work welded in built up sections, truesses and framed work, including cutting hoisting, fixing in position and applying a priming coat of red lead paint in trusses and purlins of buildings including carriage of materials through all modes of transporation within all leads and lifts as per PWD specification and as per the entire satisfaction and direction of Engineer-in-charge.
44.31
-
-
... More
Providing and fixing anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screws etc. complete 300x16mm. (three hundred into sixteen milimetre) including carriage of material by all modes of transportation within all leads and lifts as per PWD specification and as per the direction of Engineer-in-charge.
3
-
-
... More
Providing and fixing 45cm. lenght 15mm. nominal bore C.P. connection pipe with brass unions including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge
8
-
-
... More
Providing and fixing 15mm dia. C.P. brass pillat rap with capstan head including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge.
3
-
-
... More
Providing form work with steel plates 3.15mm.(Three decimal fifteen milimetre) thick welded with angle iron in frame 30x30x5mm.(Thirty into thirty into five milimetre)so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens and ballies, in all heights and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and wall etc. upto 200mm in thickness including carriage of material through all modes of transportation within all leads and lifts and as per PWD specifications and as per entire satisfaction and direction of Engineer-in-charge.
160.81
-
-
... More
Providing and fixing 12mm. (twelve milimetre) thick green chalk board with superior quality framing, the board shall be fixed on wall with specially designed J clamps. Board shall have backing material of galvanised sheet 0.28mm. thick and tip green surface for smooth weiting and board side proerly covered with anodized aluminium profile 20x15mm. size of board is 240x120 cm. etc. including carriage of material by all modes of transportation within all leads and lifts as per PWD specification and as per the direction of Engineer-in-charge.
3
-
-
... More
Painting two coats( excluding priming coat) on new steel and other metal surface under coat with ready mixed paint other than white brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter including carriage of materials through all modes of transporation within all leads and lifts as per PWD specification and as per the entire satisfaction and direction of Engineer-in-charge.
73.69
-
-
... More
Painting two coat (excluding priming coat) on new concrete/ masonry/ plastered surfaces with enamel paint of approved brand and manufacture for use on floors to give an even shade, including cleaning of all dirt, dust and other foreign matter and sand papering as required all floors including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge
118.13
-
-
... More
Random rubble masonry/polygonal rubble masonry (un-coursed/brought to courses) with hard stones of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (One cement isto six sand isto twelve graded/crushed stone aggregate 20mm.(Twenty milimetre) nominal size)at plinth level in cement mortar 1:6 (One cement isto six sand) in Breast wall and Retaining walls including carriage of material through all modes of transporation within all leads and lifts as per PWD specification and as per the entire satisfaction and direction of Engineer-in-charge. charge.
91.88
-
-
... More
Providing and fixing 10.00 litres PTMT coloured/white high density polyethylene/poly propylene (full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm. nominal size PVC ball valve with polythene float, with push botton, couplings for connections with inlet, outlet and over flor pipe, 40mm. dia C.P. flush bend including cutting holes inwalls and making good the same and connecting the flush bend with cistern and closet (overflor pipe to be measured and paid for separately) including carriage of material through all modes of transporation within all leads and lifts and as per HP.PWD. specification and as per direction of Engineer-in-Charge.
4
-
-
... More
Providing and fixing PVC plain bend 90mm (ninetymilimetre) dia. ISI marked including fixing with approved adhesive complete including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge
10
-
-
... More
Providing and fixing M.S.decorative B.P. sheet 2mm.( two milimetre) thick in eaves board/ facia/ soffit and ceilings including cutting, fitting and welding to steel roof members and applying a coat of red lead primer complete (Base members of steel work shall be measured and paid separately) including carriage of materials through all modes of transporation within all leads and lifts as per PWD specification and as per the entire satisfaction and direction of Engineer-in-charge.
100.7
-
-
... More
Distempering (two coats) with oil bound washable distemper of Asian paints or equivlant of approved shade and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer for all floors in all heights including carriage with in all leads and lifts through all modes and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.
239.37
-
-
... More
Providing and laying White glazed tiles 6 mm (six milimetre) thick in skirting risers of steps and dado 12mm thick cement mortar 1:3(1cement three sand) and jointed with cement slurry for all floors including carriage of material through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge
78.78
-
-
... More
Providing and fixing 15mm. (fifteen milimetre) nominal bore brass union to connect lead to lead including two soldered joints including carriage of material through all modes of transporation within all leads and lifts and as per HP.PWD. specification and as per direction of Engineer-in-Charge.
8
-
-
... More
Painting two coat (excluding priming coat) on new wood and wood based surfaces with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping with enamel paint other than white for all floors including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge
265.47
-
-
... More
Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated concrete/ stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surface for all floors in all heights including carriage of material within all leads and lifts and as per HP.PWD., specifications and as per direction of Engineer-in-Charge.
95.87
-
-
... More
Providing and laying reinforced cement concrete 1:2:4 ( One cement two sand isto four crushed stone aggregate 20mm. (twenty milimetre) nominal size mechanically mixed and vibrated and curing completed excluding cost of form work and reinforcement for reinforced concrete work in suspended floor, roof and landing and shelves and their support balconies, beams, girders, bressumers and cantilver upto floor two level including carriage of material through all modes of transporation within all leads and lifts as per PWD specification and as per the entire satisfaction direction of the Engineer-in-charge.
2.83
-
-
... More
Providing and fixing PVC 100mm (one hundred milimetre) dia. on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm. including filling the joints with approved adhesive complete including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge
28
-
-
... More
Providing and fixing 19mm thick Commercial Board water proof shutters for Scup boards including fixing with nickel plated piano hinges with screws etc. complete for all floors including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge.
3
-
-
... More
Providing and laying (to level and slope) cast iron pipe and spigot drain pipe of dia 200mm. (two hundred milimetre) nominal size including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge.
60
-
-
... More
Providing plinth protection 50mm (fifty milimetre) thick in cement concrete 1:3:6 (1cement:3sand: 6 crushed stone aggregate 20mm nominal size) including finishing the top surface of concrete smooth. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge
60.6
-
-
... More
Providing and fixing 40mm. thick (forty milimetre) 2nd class deodar wood wire guage shutters using galvanised M.S. wire guage of IS guage designation 85G with wire of dia 0.56mm. (zero decimal five six milimetre) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screwsfor all floors including carriage of material by all modes of transportation within all leads and lifts as per PWD specification and as per the direction of Engineer-in-charge.
28.98
-
-
... More
Providing and fixing 110x90mm. (One hundred ten into ninety milimetre) PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive,cost of cutting and making good the wall and floor's etc complete. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge
8
-
-
... More
Providing and laying reinforced cement concrete 1:1½:3 ( One cement one and half sand isto three crushed stone aggregate 20mm. (twenty milimetre) nominal size mechanically mixed and vibrated and curing completed excluding cost of form work and reinforcement for reinforced concrete work in foundation footings bases of columns and the like and mass concrete including carriage of material through all modes of transporation within all leads and lifts as per PWD specification and as per the entire satisfaction direction of the Engineer-in-charge.
31.56
-
-
... More
Providing and fixing 40mm. Wide and 4mm. Thick glass strip in joint of cement concrete flooring including carriage of material through all modes of transporation within all leads and lifts as per PWD specification and as per the entire satisfaction and direction of Engineer-in-charge. charge.
73.77
-
-
... More
Providing and laying brick work using common burnt clay building bricks in super structure for all floors in all heights using second class bricks in cement mortar 1:4 (One cement isto four sand) and curing complete including carriage of material through all modes of transporation within all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge
11.7
-
-
... More
Providing and laying mechanically mixed and vibrated cement cocnrete work 1:3:6 (One cement isto three sand isto six crushed stone aggregate 40mm. (forty milimetre) nominal size) for all floor and curing complete excluding cost of form work in foundations and plinth including carriage of material through all modes of transporation within all leads and lifts as per PWD specification and as per the entire satisfaction and direction of the Engineer-in-charge.
21.76
-
-
... More
Supplying cast iron cover without frame for manholes frame of internal dimension 455x610 mm. rectangular C.I. cover (light duty single seal pattern-I) the weight of cover to be not less than 23 kg. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge.
2
-
-
... More
Providing and laying 100mm. (One hundred milimetre) internal diametres (to level or slope) and jointing with stiff mixture of cement mortar in the proportion of 1:1 (1 cement isto One sand) salf glazed stoneware pipes grade 'A' including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge.
20
-
-
... More
Providing steel work welded in built up sections, truesses and framed work, including cutting hoisting, fixing in position and applying a priming coat of red lead paint in beams joists channesl , angles, cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like buildings including carriage of materials through all modes of transporation within all leads and lifts as per PWD specification and as per the entire satisfaction and direction of Engineer-in-charge.
5
-
-
... More
Providing and laying reinforced cement concrete 1:1½:3 ( One cement one and half sand isto three crushed stone aggregate 20mm. (twenty milimetre) nominal size mechanically mixed and vibrated and curing completed excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts, and structs upto floor two level including carriage of material through all modes of transporation within all leads and lifts as per PWD specification and as per the entire satisfaction direction of the Engineer-in-charge.
13.53
-
-
... More
Providing and fixing ridges or hips 60cm (sixty centimetre) overall in plain with 0.60mm)zero decimal six zero milimetre) thick prepainted steel hot dip metallic zinc coated sheets with the top coat of regular polyester modified (RNP) organic coating of 20 microns over 5microns primer coating back coat of polyester of 5 microns over 5 microns primer coating including fixing J or L hooks bolts and nuts 6mm dia and prepainted G.I. limpet and bitumen washer complete with all accessories including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge
33.5
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Chamba Hp, Himachal Pradesh