Public Works Department Tender
... More
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date6 May 2025
Closing DateCancelled
Tender Amount₹ 1,54,91,796
Costs
EMD
₹ 3,10,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Construction Of 4 Nos. Type-ii Residential Accommodation At Police Station Pooh In District Kinnaur (hp) (sh- Building Portion, Ws And Si, Septic Tank And Rain Water Harvesting System
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PWD_104884_2Tender No
PW/KNR-E-Tender/25-469-80 dated 28-04-2025Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing and laying cement concrete 1:4:8 (One cement : four sand : eight crushed stone aggregate 40mm (Forty millimeter) nominal size) mechanically mix by concrete mixer and compacting with vibrator and curing complete excluding cost of form work in Foundation and plinth, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
0.36
7566
2724.0119999999997
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:2:4 (1 cement : two coarse sand) : four graded stone aggregate 20 mm nominal size)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
3.97
8051
31963.661000000004
... More
Providing and laying water proofing treatment with Dr. Fixit-FASTFLEX or equivalent with two components polymer modified cementitious coating consisting of cementitious powder and a polymer liquid in two coats for first coat:- clean and saturate surface and then applying a coat of Dr. Fixit -FASTFLEX by maintaning a coverage of 6-7 sft per kg to achive one mm thickness and the same process shalltended upto 300 mm vertically. The second coat shall be applied in opposite direction after four six-hours of application of first coat then sprinkle sand on top surface of applied Dr. Fixit-FASTFLEX while still tacky over the second coat. Then apply cement mortar 1 : 4 ( 1 cement : 4 sand) admioxed with 200 ml of pidiproof LW @ 200ml per 50 kg bag of cement over the floor with the suitable grediant towards drain pipe, while the second coat of Dr. Fixit is still tacky complete upto all floor levels including carriage of materials in all leads and lifts. ncluding carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges.
27.36
1209
33083.712
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : three coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
35.76
748
26780.663999999997
... More
Providing and laying in position reinforced cement concrete 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimeter) norminal size) excluding the cost of centering, shuttring, finishing, and reinforcement in walls (any thickness) including attached pilaster, buttresses, plinth and string coureses, fillets, columns, pilliars, piers, abutments,posts, and structs, etctra all work above plinth level upto floor all level complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
16.88
12550
211852.43999999997
... More
Providing and laying in position reinforced cement concrete 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20mm (twenty millimeter) norminal size) excluding the cost of centering, shuttring, finishing, and reinforcement in beams ,suspended floors, roof having slope up to 15 Degree( fifteen Degree ), Landing, balconies, shelves, chajjas, lintels, bands, plain, window sills,staircases and spiral staircases , etctra all work above plinth level upto floor all level complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
74.08
12550
929741.0399999999
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights with steel plates 3.15mm. (Three point fifteen milimetre) thick welded with angle iron in frame 30X30mmx5mm.(Thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden/ steel battens and ballies, height of propping and centring below supporting floor to ceiling any floor/height and removal of the same for in situ-reinforced concrete and plain concrete work as per the direction of Engineer-in- charge, including carriage of materials with in all leads and lifts through all modes of transportation.
-
-
-
... More
Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc.upto any thickness in Super-structure for all floor level in all heights.
294.24
782
230169.24000000002
... More
Beams, cantilevers, girders and lintels sides and soffits of beams, beam hunchings, cantilevers, bressumers and lintels up to any depth in Super structure for all floor level in all heights.
158.4
623
98825.76
... More
Columns, pillars, posts and struts. Square, rectangular or polygonal in plan, in Super-structure for all floor level in all heights.
110.88
816
90566.78399999999
... More
Stair cases with sloping or stepped soffits excluding landings in Super-structure for all floor level in all heights.
27.18
659
17923.851000000002
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
14.96
682
10206.460000000001
... More
Edges of slabs and breaks in floors and walls up to any width in Super-structure for all floor level in all heights. (under 20cm wide )
228.57
213
48753.981
... More
Providing Tor steel reinforcement for R.C.C. work (TATA/SAIL/JINDAL/Rashtriya Ispat /or its equivqalent )including cutting, bending, binding and placing in position complete in Super-structure for all floor in all heights, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
35718.06
111
3966490.5629999996
... More
Providing and laying Brick masonary using common burnt clay building bricks) in Cement Mortar 1:6 (One cement : six sand) First Class Bricks above plinth level in super-structure for all floors in all heights, including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
47.92
12985
622284.328
... More
Providing and laying Half brick masonry in common burnt clay building bricks in Cement Mortar 1:4 (One cement : four sand) Second Class Bricks in super-structure for all floors in all heights, including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
224.18
1562
350337.295
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand), including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
45.41
6158
279646.1325
... More
Providing and fixing 20 mm (Twenty milimeter) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty milimeter) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels, Granite of any colour and shade, Area of slab over 0.50 sqm, Baroda Green Marble including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..
13.68
2359
32275.908
... More
Providing and laying mirror polished Kota stone slab 25 mm thick of size 55x55 CM of approved make in flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
51.3
2186
112152.05999999998
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.00 mm thick including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
100.06
776
77651.563
... More
Providing and fixing cup board shutters19 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
155.11
2059
319495.57800000004
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete, Fixed to steel windows by welding, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
2216.7
188
417182.93999999994
... More
Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including black enameled iron butt hinges with necessary screws 40mm.(forty millimeters) thick, 2nd class deodar wood for all floors, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
77.42
3955
306258.036
... More
Providing & fixing 150 mm M.S. single acting spring hinges bright finished with necessary screws etc. including carriage of materials in all leads and lifts .including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
48
693
33264
... More
Providing and fixing 40 mm thick panelled and glazed shutters for doors, windows and clerestory windows using 4 mm thick double float glass panes,Second class deodar wood including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
212.18
4911
1042069.025
... More
Providing and fixing 40 mm thick 2nd class deodar wood wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with With ISI marked stainless steel butt hinges of required size and necessary screws .including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
103.07
4331
446432.24450000003
... More
Providing and fixing 20mm dia (Twenty millimeter diameter) chromium plated brass curtain rod having wall thickness of 1.25mm (One point twenty five millimeter) with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete .including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
87.9
282
24871.305
... More
Providing 40x5 mm (forty into five milimeter) flat iron hold fast 40 cm long including fixing to frame with 10 mm (ten milimeter) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (one cement : three coarse sand : six graded stone aggregate 20mm (twenty milimeter) nominal size), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
504
199
100422
... More
Providing and fixing anodized aluminum sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
-
-
-
... More
300x16mm (Three hundred into sixteen millimeter)
6
239
1439.1
... More
250xmm16 (two hundred fifty into sixteen millimeter)
38
211
8033.2
... More
Providing and fixing aluminium tower bolts, (berrel type), anodized transparent or dyed to required colour or shade, with necessary screws etc. complete , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
-
-
-
... More
250x10 mm (two hundred fifty into ten millimeter)
38
111
4229.4
... More
150x10 mm (one hundred fifty into ten millimeter)
96
86
8265.599999999999
... More
Providing and fixing aluminium handles, ISI marked, anodised transparent or dyed to required colour or shade, with necessary screws etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
-
-
-
... More
125 mm (One hundred twenty five millimeter)
72
64
4618.8
... More
100 mm (Hundred millimeter)
96
57
5486.4
... More
Providing & fixing Powder coated aluminium hanging floor door stopper ISI marked with transparent or dyed to required shade and colour with screws etc. Twin Rubber stopper completeto suit shutter thickness complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
12
123
1478.4
... More
Providing and fixing Triple strip Vertical type magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
12
50
601.2
... More
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
24
216
5187.6
... More
Structural steel work including hollow section riveted, bolted or welded in built up sections of TATA, SAIL or RASHTRIYA ISPAT or its equivalent, In truss and trused purlins in buildings.and In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like. , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
7297.65
110
803836.1475
... More
Steel work welded in built up sections/ framed work of TATA, SAIL or RASHTRIYA ISPAT or its equivalent,In gratings, frames, guard bar, ladder, railings, brackets,ornamental brackets decorative MS screen gates and similar works, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
4316.05
134
578350.7000000001
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
2668
123
330565.2
... More
Providing and fixing double rebates MS channel iron doors window clerestry window framminfg manufacturing framme MS section 125x65 mm and MS FLAT 40x10 mm as per direction of Engineer- In -Charge and apporoved drawing including hinges lock jambs beed and if require angle thrash hold of mol;d steel angle 50X25 mm welded or rigidly fixed by mechanically means lugs with split and tails to each jambs including steel but hinges 2.5 mm thick with provision for locking observer as specified and applying a coat of approval steel primer after pre-treatment of the surface .
357.3
1598
571161.915
... More
Providing and fixing double rebates MS channel iron doors window clerestry window framminfg manufacturing framme MS section 75X40 mm and MS FLAT 40x10 mm as per direction of Engineer- In -Charge and apporoved drawing including hinges lock jambs beed and if require angle thrash hold of mol;d steel angle 50X25 mm welded or rigidly fixed by mechanically means lugs with split and tails to each jambs including steel but hinges 2.5 mm thick with provision for locking observer as specified and applying a coat of approval steel primer after pre-treatment of the surface .
212.4
950
201886.2
... More
Providing and laying vitrified floor tiles of NITCO/Orient /Somany or its equivalent in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty millimeter) thick cement mortar 1:3 (one cement : Three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm three point three killograme/square meter) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600mm (six hundred into six hundred millimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
238.46
1646
392731.69700000004
... More
Providing and laying vitrified floor tiles of NITCO/Orient /Somany or its equivalent in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 12mm (twenty millimeter) thick cement mortar 1:4(one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm three point three killograme/square meter) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 1000x1000mm (one thousand into one thousand millimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
18.56
1665
30912.607999999997
... More
Providing and fixing 1st quality ceramic glazed floor tiles of NITCO/Orient /Somany or its equivalent conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (twelve millimeter) thick bed of cement Mortar 1:3 (One cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg (three point three killograme) per sqm (square meter) including pointing in white cement mixed with pigment of matching shade complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
36.09
1223
44170.55100000001
... More
Providing and fixing 1st quality ceramic glazed wall tiles NITCO/Orient /Somany or its equivalent conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (twelve millimeter) thick bed of cement Mortar 1:3 (One cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg (three point three killograme) per sqm (square meter) including pointing in white cement mixed with pigment of matching shade complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
32.64
1155
37705.728
... More
Providing and laying cement concrete flooring 1:2:4 (One cement : two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
24.03
626
15059.601000000002
... More
Providing and fixing 0.60mm (zero point sixty milimeter) thick prepainted steel sheet of TATA DURASHINE/JINDAL or its equivalent in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron Jor L hooks, bolts and nuts 6mm dia (six milimeter diameter)with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.
250.56
1736
435185.136
... More
Providing and fixing ridges or hips 60 cm overall with 0.60mm thick pre-painted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with pre-painted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
22.6
757
17119.5
... More
Providing and fixing valley 90cm overall 0.45mm thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metalic zinc coated sheet TATA DURASHINE/JINDAL or its equivalent with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge:-0.60 mm ( zero point sixty millimetre) thick sheet. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
13.8
891
12299.25
... More
Providing and fixing M.S. BP Sheet 2mm (One point sixty six millimeter to 2mm (Two millimeter) thick TATA, SAIL or RASHTRIYA ISPAT or its equivalentin eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete (Base members of steel work shall be measured & paid separately),including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
53.77
2009
108040.061
... More
Providing and fixing plain multipurpose cement board(Hight pressure steamcured) 8 mm thick Cement fiber board as per IS: 14862 with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
88.89
810
72000.9
... More
Providing fixing 30 cm wide 120 cm overall box type gutter with 0.45 mm thick plain prepainted steel sheet in roofing of TATA, SAIL or RASHTRIYA ISPAT or its equivalent with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster 5 microns over 5 microns primer coating with iron brackets 40 X 3 mm size bolt and nuts and washers etc. including making necessary connections with rain water pipe complete as per design. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
61.2
861
52717.68
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories Finolex or its equivalent for unplasticised Rigid PVC rain water pipes 150 mm dia (one Hundred fifty millimeter) conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten milimeter) gap for thermal expansion, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
24
239
5755.200000000001
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
-
-
-
... More
Coupler 150 mm (One hundred fifty millimeter)
8
133
1070.4
... More
Single pushfit Coupler150mm (One hundred fifty millimeter)
8
126
1013.2
... More
Bend 87.5° 150mm (One hundred fifty millimeter)
16
137
2205.6
... More
6mm (Six millimeters) cement plaster to ceiling 1:3 (one cement :three sand) in Super-structure for all floors, including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
281.58
253
71493.162
... More
15mm (Fifteen milimeter) cement plaster in single coat on rough side of brick/concrete /stone walls for interior/exterior plastering including arrises, internal rounded angles, chamfers and /or rounded angles not exceeding 80mm (Eighty milimeter) in girth and finished even and smooth in cement mortar 1:6 (one sand: six sand)in Super-structure for all floors in all heights, including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
697.81
332
231777.59149999998
... More
15mm (Fifteen milimeter) cement plaster on the rough side of single or half brick wall of mix : 1:4 (One cement: four fine sand), including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
104.621
355
37145.68605
... More
Finishing walls with Acrylic Smooth exterior paint of required shade of Asian/Nerolac/Burger or its equivalent: New work (Two or more coat applied @ 1.67 ltr/10 sqm (one point sixty seven litter/ten square meter) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm (two poin twenty killograme/ten square meter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
472.23
158
74872.06650000002
... More
Distempering ( two coats) with synthestic/ acrylic washable distemper of approved brand Asian/Nerolac/Burger or its equivalent and manufacture and of required shade on undecorated ceiling with 1st Qulaity surfaces to give and even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth .Priming coat with distemper primer, in Super-structure for all floors in all heights, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
2346.84
99
233745.264
... More
Painting wood work with Deluxe Multi Surface Pain of Asian/Nerolac/Burger or its equivalentt of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
139.87
119
16770.413
... More
Applying priming coat of Asian/Nerolac/Burger or its equivalentover new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
139.87
60
8511.0895
... More
Finishing with Deluxe Multi surface paint system of Asian/Nerolac/Burger or its equivalent for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
396.23
125
49885.357
... More
Painting with Satin enamel paint of Asian/Nerolac/Burger or its equivalent of approved brand and manufacture to give an even shade :Two or more coats on new concrete / plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand tapering as required..including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
89.4
109
9811.650000000001
... More
Providing and applying white cement based puttyof Asian/Nerolac/Burger or its equivalent of average thickness 2 mm (Two millimeter), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
3233.04
108
349329.972
... More
Applying priming coat on new concrete / plastered surfaces of Asian/Nerolac/Burger or its equivalentafter and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand tapering as required with ready mixed primer.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
89.4
61
5475.75
... More
Providing and fixing 200 mm (Two hundred millimeter) MS hooks and eyes :.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
120
64
7680
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
12
1173
14079
... More
Providing and fixing 65x35mm special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc.complete. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
16
325
5209.6
... More
Providing and fixing 50 mm CP brass cup board or ward robe knob with nuts complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
24
68
1632
... More
Constructiong course rubble hammer dressed 'U' shape open surface drain with side wall 15 x 22 cm(fifteen into twenty two millimeter) in cement mortar 1:6 ( one cement :six sand ) and inside plastering with cement plaster 1 :3 (one cement :three sand ) including earth work and laying 10 cm(ten centimetre) cement concrete in 1:5:10 ( one Cement : Five sand : ten graded stone aggregate of 40 mm (forty milimetre)nominal size) and 7.5 cm (seven point five centimeter) cement concrete 1:2:4 (one: cement :two sand :four graded stone aggregate of 20 mm (twenty milimetre) nominal size ) and finished with a floating coat of neat cement complete as per standard design including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Chargeincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
64
1151
73683.2
... More
Supplying and filling brick bats in soakpit of following sizes including carriage of materials, incidentials in all leads and lifts and as per the direction of the Engineer-in Chargeincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
2.79
2039
5688.81
... More
Supplying and filling crushed stone aggregate in soakpit of following sizes, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications.
-
-
-
... More
25 mm (Twenry five millimeter) nominal size
1.32
3185
4204.398
... More
12 mm (Twelve millimeter) nominal size
1.32
3185
4204.398
... More
Supplying and fixing 300 mm x 300 mm (Three hundred millimeter into three humnred millimeter) cast iron cover with frame for gully trap completed, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
10
802
8028
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
-
-
-
... More
15 mm (Fifteen millimeter) dia nominal bore
20
265
5318
... More
20mm (Twenty millimeter )dia nominal bore :-
20
290
5806
... More
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
-
-
-
... More
15 mm (Fifteen millimeter) dia nominal bore
25
436
10900
... More
20mm (Twenty millimeter )dia nominal bore :-
25
468
11718.75
... More
Making connection of G.I. distribution branch with G.I.main of following sizes by providing and fixing tee,including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
1
758
758.75
... More
Providing and fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).20mm nominal bore :- including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
1
687
687.6
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank of JINDAL/CERA/VECTUS or its equivalent, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank,10000 litres net capacity tank including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
6000
12
73500
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
3
2135
6406.950000000001
... More
Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special ittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
-
-
-
... More
1216 mm (16 mm O.D. pipe) INTERNAL WORK - EXPOSED ON WALL
20
269
5397
... More
1620 mm ( 20 mm OD pipe).
20
323
6478
... More
Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply,capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacingConcealed work, including cutting chases and making good the wall etc. This includes the costs of cutting chases and including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
-
-
-
... More
1216 mm (16 mm O.D. pipe)
20
445
8913
... More
1620 mm ( 20 mm OD pipe).
20
485
9710
... More
Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply,capable to withstand temperature up to 80°C, including all special ittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer in charge.External workincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
-
-
-
... More
1216 mm (16 mm O.D. pipe)
20
246
4933
... More
1620 mm ( 20 mm OD pipe).
20
270
5416
... More
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipe ISI marked of JINDAL/FINOLEX/D-PLAST/CERA or its equivalent including fixing with approved adhesive etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
-
-
-
... More
150 mm (one hundred fifty millimeter) diameter
20
502
10052
... More
110 mm (One hundred ten millimeter) diamete
27
412
11149.65
... More
Providing and fixing PVC single equal branch with oval access door of JINDAL/FINOLEX/D-PLAST/CERA or its equivalent , ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
-
-
-
... More
150 mm (one hundred fifty millimeter) diameter
5
515
2575
... More
110 mm (One hundred ten millimeter) diameter
8
443
3550.8
... More
Providing and fixing PVC door bend with oval access door, insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
-
-
-
... More
150 mm (one hundred fifty millimeter) diameter
5
411
2055.75
... More
110 mm (One hundred ten millimeter) diameter
5
311
1557.75
... More
Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
-
-
-
... More
150 mm (one hundred fifty millimeter) diameter
6
372
2236.5
... More
110 mm (One hundred ten millimeter) diameter
6
330
1980.3000000000002
... More
Providing and fixing P.V.C. collar ISI marked including fixing with approved adhesive etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
-
-
-
... More
150mm (One hundred fifty millimeter) diameter
6
136
819.3000000000001
... More
110mm (One hundred ten millimeter) diameter
6
108
648.5999999999999
... More
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
-
-
-
... More
150mm (One hundred fifty millimeter) diameter
6
372
2236.5
... More
110mm (One hundred ten millimeter) diameter
6
330
1980.3000000000002
... More
Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
-
-
-
... More
150mm (One hundred fifty millimeter) diameter
24
120
2901.6000000000004
... More
110mm (One hundred ten millimeter) diameter
36
92
3328.2000000000003
... More
Providing and fixing PVC floor trap of JINDAL/FINOLEX/D-PLAST/CERA or its equivalent self cleansing design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete 110mm x 90mm (one hundred ten milimeter into nintey milimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
18
1340
24125.399999999998
... More
Providing and fixing PVC cowl including carriage of materials within all leads and lifts including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
-
-
-
... More
150mm (One hundred fifty millimeter) diameter
2
237
475.2
... More
110mm (One hundred ten millimeter) diameter
3
194
584.7
... More
Providing and fixing PVC double equal branch with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
-
-
-
... More
150mm (One hundred fifty millimeter) diameter
4
593
2373
... More
110mm (One hundred ten millimeter) diameter
4
479
1917.8
... More
Providing and fixing PVC plain double equal branch ISI marked including fixing with approved adhesive etc. complete. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
-
-
-
... More
150mm (One hundred fifty millimeter) diameter
4
590
2361.6
... More
110mm (One hundred ten millimeter) diameter
4
547
2190.8
... More
Providing and fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
-
-
-
... More
150 mm x 110 mm dia (one hundred fifty millimeter X one Hundred ten millimeter )
5
308
1543.5
... More
110 mm x 90 mm dia (one hundred ten millimeter X Ninty millimeter )
5
266
1330.25
... More
Providing and fixing size 'P' or 'S' trap for water closet ( squatting pan) 100 mm (One hundred millimeter), including jointing the trap with the pan vitreous china, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
4
419
1678.8
... More
Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
10
1075
10754.5
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm Sand cast iron S&S as per IS - 1729, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
2
490
981.8
... More
Cutting Chase in stone / brick masonary walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) 100 mm dia. : including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD pecifications and as per direction of the Engineer-in-charge.
20
637
12746
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan) of CERA/ SOMANY/ JAGUAR OR its equivalent with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm (five hundred eighty into four hundred forty millimeter) with integral type foot rests, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD pecifications and as per direction of the Engineer-in-charge.
2
2532
5064.6
... More
Providing and fixing white vitreous china (European type/ wash down type) water closet pan of CERA/SOMANY/JAGUAR OR its equivalent Anglo Indian WC Pan No -20012 of IS No 2556, .including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
4
5235
20941.2
... More
Providing and fixing P.V.C. low level flushing cistern of CERA/SOMANY/JAGUAR OR its equivalent with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - Whiteincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
6
1612
9677.7
... More
Providing and fixing wash basin with C.I. brackets of CERA/SOMANY/JAGUAR OR its equivalent, 15 mm C.P. brass pillar taps, 32 mm (thirty two millimeter) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm (six hundred thirty into four hundred fifty) with a pair of 15 mm (fifteen mllimeter) C.P. brass pillar taps including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
6
2741
16446
... More
Providing and fixing stainless steel Kitchen sink of approved standard ISI -No 1022 (size 460x560x229 of Paryag Polymer with C.P. waste with C.I. or M.S. brackets painted white of CERA/SOMANY/JAGUAR OR its equivalent including cutting holes and making good the same but excluding fitting. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
6
4501
27011.699999999997
... More
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
16
137
2203.2
... More
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete Solid Type White solid plastic seat with lid of CERA/SOMANY/JAGUAR OR its equivalent :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
6
832
4993.5
... More
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
6
1567
9405.599999999999
... More
Providing and fixing C.P. brass waste (heavy duty ISI marked IS:8931 & 8934) for wash basin or sink including carriage of materials within all leads and lifts including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
12
317
3807
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia Flexible pipe. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
12
114
1375.1999999999998
... More
Providing and fixing 100 mm (hundred millimeter) sand cast Iron grating for gully trap, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
18
74
1343.7
... More
Providing and fixing 600x450mm (six hundred into four hundred fifty millimeter) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six millimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
6
1361
8168.099999999999
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour : 600 mm (six hundred milimeter) long towel rail with total length of 645 mm (six hundred forty five milimeter), width 78 mm (seventy eight milimeter) and effective height of 88 mm (eighty eight), weighing not less than 190 gms., including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
6
653
3919.5
... More
Providing and fixing 600x120x5 mm (six hundred into one hundred twenty into five millimeter) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (forty millimeter) long screws, rawl plugs etc., complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
6
1039
6235.799999999999
... More
Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
6
379
2278.2
... More
Providing and fixing toilet paper holder : C.P. brass, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
6
618
3713.1000000000004
... More
Providing and fixing brass bib cock of approved quality : 15 mm (fifteen millimeter) nominal bore of CERA/SOMANY/JAGUAR OR its equivalent, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
18
974
17533.8
... More
Providing and fixing CP brass pillar tap of jaquar with capstan head (heavy duty ISI marked IS:8931 & 8934) of CERA/SOMANY/JAGUAR OR its equivalent including carriage of materials within all leads and lifts 15mm dia :- including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
6
810
4865.4
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, 15mm (fifteen (millimeter) nominal bore of CERA/SOMANY/JAGUAR OR its equivalent, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
12
651
7823.400000000001
... More
Providing and fixing 15mm mixer for kitchen sink with top and bottom swiging spout of CERA/SOMANY/JAGUAR OR its equivalent. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
6
2233
13401.599999999999
... More
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm (forty five centimeter) length, 15 mm (fifteen millimeter) nominal bore, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
6
138
828.3000000000001
... More
Providing and fixing CP Brass Bottle Trap for Wash basin and sink : Bottle trap 31mm (thirty one millimeter) single piece moulded with height of 270 mm (two hundred seventy millimeter), effective length of tail pipe 260 mm (two hundred sixty millimeter) from the centre of the waste coupling, 77 mm (seventy seven millimeter) breadth with 25 mm (twenty five millimeter) minimum water seal, weighing not less than 260 (two hundered sixty) gms, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
6
938
5633.700000000001
... More
Providing and fixing C. P. brass stop cock:- 15mm (Fifteen millimeter diameter) of CERA/SOMANY/JAGUAR OR its equivalent including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
6
606
3637.2000000000003
... More
Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 gms of CERA/SOMANY/JAGUAR OR its equivalent . including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
6
236
1418.1
... More
Providing and fixing brass full way valve with wheel including carriage of materials of CERA/SOMANY/JAGUAR OR its equivalent within all leads and lifts including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
-
-
-
... More
15mm (Fifteen millimter) nominal bore.
6
414
2484
... More
20mm ( Twenty millimeter)nominal bore :-
2
513
1027.1
... More
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic bal 15 mm nominal bore, 105 mm long, weighing not less than 138 gms.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
6
345
2075.7
... More
Providing and fixing 8 mm (eight millimeter) diameter C.P. / S.S. Jet with flexible tube upto 1 (one)metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge, including carriage of materials through all modes of portation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
6
316
1898.3999999999999
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) :3 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : including carriage of materials through all modes of portation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
-
-
-
... More
a)Inside size 90x80 cm and 45 cm deep including Precast RCC Cemocrate or equivalent cover with frame (heavy duty) of size 455x610 mm internal dimensions, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Precast RCC Cemocrate or equivalent (Heavy Grade) cover with frame forgully trape (Standard Pattern):
2
13505
27011.1
... More
b)Inside size 120x90 cm and 90 cm deep including Precast RCC Cemocrate or equivalent cover with frame (heavy duty) of size 455x610 mm internal dimensions, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
26024
52049.4
... More
Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg (Twenty three kilogram), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
3
1414
4243.65
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements