Institute Of Himalayan Bioresource Technology Tender

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

P/f Student table of overall size 1.10mt long x0.70m deepx1.65m total height. Lower part of table shall have a vertical partiton, one shutter and one drawer 0.15cm deep & 15cm deep long. The upper portion of table shall have two intermediate partitions & shutters 1.10x0.38m size. Prelaminated MDF board 18mm thick shall be used in table except on back & drawer bottom which shall be 8mm thick . The exposed edges of board is to be covered with 0.8mm lamination of matching colout/epoxy 40mm cupboard lock of approved make shall be provided in the cabintes. The Cabinet shall be fixed with 6 nos. PVC shoes. MDF board shall be of approved manufacturer, ISI marked conforming to IS:14587, exterior grade with choice lamination on one side and balancing lamination on other side,

Supply and installation of revolving Chair withour arm with vertical seat height contrallable adjustment having cushion density of 40 kg/m3. the febric colour may be blue colour, The dimensions of the chair will be 40 cm to 54 cm height width, of seat 70 cm to 72 cm. the pneumatic height Adjustment shall be 11.00 cm to 3cm (Godrej Diva 7045 or equivalent make)

Supply and Installation of very high back revolving chair of size 77cm width, 77 cm depth and seat height 50cm. The back shall be having lumber support system and size of back will be 53cm width x 95cm Height. The revolving mechainsm will be 360. the chair will be finished with lather upholstery. (Godreaj Halo very high back chair or equivalt)

Providing and Fixing of radium tape letters with radium tape background on ACP sheet 3 mm thick exterior grade including logos etc.

Providing and fixing glow sign board cube of size 2'x4' each face, made up ot 20mm square hollow section weight 1Kg/metre. The cube will be fixed with 8 No. LED tubelights 4' long. Each face will be having required write up on blue shade back round and white colour letters in flex complete in all respect i/c fixing and testing at site

Providing and fixing side cabinet of sixe 1.50m (long)x0.45m (Overal depth)x0.75m (high, including skirting). The cabinet is to be fixed with one no. Intermadiate vertical partition and one no. Intermediate horizontal partition. I removalbe type). The top board of the cabinet shall be projected by 25mm on front side beyond overal depth of the cabinet. The cabinet shall be fixed with 4 nos. 0.15m)deep) drawers on top and 4 nos. shutters in rest of the front area above skirting. The cabinet is to be fabricated out of 18mm thick prelaminated MDF board. The thickness of the board on back side of the cabinet and bottom of the drawers shall be 8mm. The shutters and drawers shall be fixed with 8 nos. 100mm C type SS handles and six nos. cupboard locks. The drawer shall be fixed with power coated telescopic channles of approved make. The exposed edges of the board shall be covered with matching lamination 0.8mm thick/painted with epoxy paint of matching colour. The cabinet shall be fixed with 4 nos. PVC shoes. The MDF board shall be of approved manufacturer, ISI marked conforming to IS:14587