Institute Of Himalayan Bioresource Technology Tender

Earthing with GI earth plate 600mmx600mmx6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply, fabricating, installing, testing, commissioning of electricaly connected factory (CPRI approved) made, AMF panel board for 500 KVA DG Set with IP66 Protection. The AMF Panel should be supplied with suitable rating Breaker for Both DG Set & Mains Supply. (NOTE: All technical detail related to this is attached in Tender Document from Page 81 to 83)

Providing & fixing 25mmx5mm GI strip in 40 mm dia GI pipe from earth electrode including connection with GI nut, bolt, spring, washer excavation and refilling etc. as required.

Providing & fixing 25mmx5mm copper strip in 40 mm dia GI pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and refilling etc. as required.

Supplying & laying of following size DWC HDPE pipe ISI Marked along with all accessories like socket, bend, coupler etc conforming to IS 14930, Part II complete with fitting and cutting, jointing etc in the existing trench, complete as required. i) 160 MM dia ( OD 160 mm & ID 135 nominal )

Earthing with copper earth plate 600mmx600mmx3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing & fixing 25 mm x 5 mm copper strip on surface or in recess for connection etc as required.

Supplying & laying 25mmx5mm GI strip at 0.50 Mtr below ground as strip earth electrode, including connection/ termination with GI nut, bolt,spring, washer etc as required. ( Jointing shall be done by overlapping and bwith 2 Sets of GI nut bolt & spring washer spaced at 50 mm)

Supplying & testing of Aluminium conductor, armoured, PVC insulated & PVC sheathed/ XLPE power cable of 1.1 KV grade of following sizes as required. i) 3.5 core 300 sqmm

Supplying & testing of Aluminium conductor, armoured, PVC insulated & PVC sheathed/ XLPE power cable of 1.1 KV grade of following sizes as required. i) 3.5 core 400 sqmm

Providing, Installation, Testing & commoissioning of CPCB IV+, Silent Type Diesel Generating set 500 KVA, 415 volts complete with electrical panel comprising of minimum rated BHP (as per manufacturer standard) at 1500 RPM rated, Liquid Cooled Electronic Diesel Engine, continuous duty coupled to single bearing, brush less alternator rated 500 KVA at 1500 RPM with 0.8 lagging power factor at 415 volts, 3 phase 50 Hz. Both Alternator & Diesel Engine mounted & aligned on a common MS Base Frame complete with suitable size fuel tank, Residential Exhaust Silencer along with its associated piping of suitable size and length to meet actual site requirement as per recommendation of manufacturer, AVM Pads fitted on base frame as per recommendation of the manufacturer of DG Set to ensure vibration free installation. The DG Set shall be accompanied with two no. lead acid battery ( 12V Each) and battery charger with all necessary accessories. Tool kit to be provided as per standard engineering practice/ manufacturer recommendation. The acoustic lining of DG Set should be made of high quality insulation material i.e. rock wool/ mineral wool/ glass/ PU Foam of appropriate thickness & density for providing maximium sound absorption as per latest CPCB-IV+ Norms and covered with fine glass fibre cloth & would be supported by perforated MS sheet duly powder coated/ GI Sheet/ Aluminium Sheet or as per latest CPCB ammendments. Above silent type DG Set shall be provided & installed complete with all accessories as above complete in all respects for satisfatory commissioning of the equipment as required. (NOTE: The detailed Scope of Work, Technical Specifications, List of Approved Makes, Technical Particulars Proposed by Manufacturer/ Bidder (to be filled by bidder) are attached in Tender Document from page 78 to 88)

Supplying & testing of solid Copper conductor, XLPE insulated, core laid up, PVC Tape Innersheathed, unarmoured control cable of 650/1100 V grade of following sizes as required. i) 8.0 core 2.5 sqmm