Institute Of Himalayan Bioresource Technology Tender

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. i) 150 mm. Dia (Make: Jindal/ Tata/Surya )

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required i) 25 mm dia Pipe (Make: Jindal/ Tata/Surya )

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required i) 32 mm dia Pipe (Make: Jindal/ Tata/Surya)

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required i) 50 mm dia Pipe (Make: Jindal/ Tata/Surya )

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required i) 80 mm dia Pipe (Make: Jindal/ Tata/Surya)

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required i) 150 mm dia Pipe (Make: Jindal/ Tata/Surya)

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required i) Single headed Gunmetal (Make: Minimax/OMEX/Padmini)

Supplying and fixing single headed external hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required i) Single headed Gunmetal (Make: Minimax/OMEX/Padmini)

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : i) 80 mm dia (Make: Sant/ Zoloto/Audco)

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : i) 150 mm dia (Make: Sant/ Zoloto/Audco)

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. (Make: Karatar/ Sant/ Zoloto)

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required i) 150 mm Dia (Make: Sant/ Zoloto/Audco)

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required i) Gun Metal (Make: Minimax/ OMEX/ Padmini)

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 b) 20 mm nominal internal dia gun metal globe valve & nozzle. c) Drum and brackets for fixing the equipmets on wall. d) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. i) 30 Mtr. (Make: Minimax/ OMEX/ Padmini)

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required. i) Gun Metal (Make: Minimax/ OMEX/Padmini)

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : i) 4 way - 150 mm dia M.S. Pipe (Make: Minimax/ OMEX/ Padmini)

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : i) Pendent Sprinkler (Make: Tyco/ OMEX/ NewAge)

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. (Make: Indfoss/ Agni/ Honeywell)

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. i) 25 mm nominal bore (Make: Sant/ Kartar/ Zoloto)

Supplying & fixing of Weather proof standard fire hose cabinet made of 18 SWG powder coated fibre. sheet having single or double opening glazed (3.0 mm thick glass) shutter including necessary locking arrangement by allan key, stove enamelled Fire red finish (as per IS : 5, shade no. 536) with " Fire Hose" marked on front, suitable for housing 2 nos. 15m long 63 mm dia Hose pipe, 1 No. branch pipe & nozzle spanner as required complete in all respects and to the best satisfaction of Engineer-in-charge. (Make: Minimax/ OMEX/ Padmini)

Providing and fixing Carbon dixoide CO2 4.5 kg type fire extingushers ISI mark. CE and EN Certfied, consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hoase, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and M S Wheel type complete with internal charge as required complete in all respects and to the best satisfaction of Engineer-in-charge. (Make: Minimax/ OMEX/ Ceasefire)

Providing and fixing stored pressure vessel ABC 6 Kgs. Powder type fire extingushers ISI mark. CE and EN Certfied,consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hoase, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. (Make: Minimax/ OMEX/ Ceasefire)

Providing & fixing of IS marked 15683 Water type 9 Litre (S/P) fire Extinguishers ISI mark. CE and EN Certfied,cylindrical body, squeeze lever discharge valve fitted with pressure discharge hose, discharge nozzle, etc. finished externally with red enamel paint and fixed to wall with brackets complete with internal charges. (Make: Minimax/ OMEX/ Ceasefire)

Supplying & testing of Aluminium conductor, armoured, PVC insulated & PVC sheathed/ XLPE power cable of 1.1 KV grade of following sizes as required. i) 3.5 core 35 sqmm Armoured cable (Make: KEI/ Havells/ Finolex)

Supply,fabricating,installing, testing, commissioning, electrically connected factory (CPRI approved) made, LT panel board of approved size as recommended by IS & CPRI norms(1.15x0.7x0.15-LXHXD Mtr. approx) indoor type wall mount,made out of 1.65mm CRCA Sheet. Powder coated with pure polyester Grade Powder.Panel should be fully compartmentalised with 1100 volts, with IP-65 Protection for 415 volts,3 phase,4 wires AC Supply, complete all as specified including provision of following accessory/ components housed in it: (i)100 Amp. rated Al. bus bar with color code TPN mounted on epoxy insulators(set of 04 bus bars).(1mmSq=1Amp) (ii) LED indicating lamp (set of three)-01 set (iii) internal wiring with 1100 volt PVC insulated copper conductor of suitable size. (iv) Earthing terminal and cable glands.(v) Danger notice plate for LT with conventional skull and bones duly riveted/pasted to the panel board door. (MCCB Makes:- Havells/ Indo Asian/ L&T). Incoming:- (i) MCCB 100 Amps, TP,Adj-T Fxd-M based, rupture capacity 36kA.(Spreader Links Inc.)---1No. Outgoing:- (i) MCCB 63A , TP,16KA C-Curve.---2Nos. ( With PowerContactor 25 Amp AC3, Push Button for Start/ Stop, ON/ Trip LED Indicator,Auto/ Manual Selector Switch, OLR 9-15 Amp) ii) MCCB 40A , TP,10KA C-Curve.---1Nos. ( With PowerContactor 25 Amp AC3, Push Button for Start/ Stop, ON/ Trip LED Indicator,Auto/ Manual Selector Switch

Providing & fixing round shape 2.0 core 1.5 sqmm FRLS PVC insulated, copper conductor cable, in PVC Sleeve/ Conduit of suitable size on the floor/ wall, as required. (Make: KEI/ Havells/ Finolex)

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing & laying earth connection from earth electrode with 4.0 mm dia copper wire in 15 mm dia GI pipe from earth electrode including connection with copper thimble excavation and refilling as required.

Providing & fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.