Institute Of Himalayan Bioresource Technology Tender

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. i) 120 mm dia (OD-120 mm & ID-103 mm nominal)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/ HDPE pipe as required i) Above 185 sq. mm and upto 400 sq. mm

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

Supplying & testing of Aluminium conductor, armoured, PVC insulated & PVC sheathed/ XLPE power cable of 1.1 KV grade of following sizes as required (Make: Polycab/ Havells/ KEI ) i) 3.5 core 240 sqmm

Supply, fabricating, installing, testing, commissioning & electricaly connected factory(CPRI approved) made, LT panel board of approved size as recommended by IS & CPRI Norms (1.8x1.7x0.45--- LXHXD Mtr Approx) outdoor type, Floor Mounted made out of 3.0 mm thick CRCA Sheet for load bearing and 2.0 mm thick for non load beraing, Powder coated with pure polyester grade powder. Panel should be fully compartmentalised floor mounted with frame & legs of 5 mm MS 600 mm long 1100 volts, with IP 65 protection for 415 volts, 3 phase, 4 wire AC Supply, completer all as specified including provision of following accessories/ components housed in it : i) 500 Amp rated Al. bus bar with colour code TPN mounted on epoxy insulators : 01 set ( set of 04 bus bars) (1 sqmm = 1 amp) ii) Digital Multifunction metre 0-500 Amps with suitable CT= 01 SET III) LED INDICATING LAMP (SET OF THREE) = 01 SET iv) Internal wiring with 1100 volt grade unsheathed PVC insulated copper conductor of suitable size with colour coding for all connection with suitable lugs as required. v) Earthing terminal, cable gland, Danger notice plate for LT with conventional skull & bone DULY RIVETED/ PASTED TO THE PANEL BOARD DOOR. INCOMING : I) MCCB 400 Amps, 4 pol;e, Microprocessor based, rupture capacity 35 KA (Spreader Links inc) = 01 no ii)400 Amp Changeover Switch = 01 NO Outgoing : i) MCCB 320 Amps, TP+N.L. 36 KA Adj - Thermal Setting - ( Spreader Links inc) = 01 No ii) MCCB 250 Amps, TP+N.L. 25 KA Adj - Thermal Setting - ( Spreader Links inc) = 01 No iii)MCCB 100 Amps, TP+N.L. 16 KA Adj - Thermal Setting - ( Spreader Links inc) = 04No iv) MCB 32 Amp, 4 Pole 10 KA C Curve = 02 Set V) 32 Amp, 4 Pole C curve + 30 Amp AC-1 Duty Contactor + Astro Time Switch terminated on terminal block. = 01 Set ( MCCB Make: INDO ASIAN/ HAVELLS/ L&T, Astronomical Time Switch Make: L&T/ LEGRAND/ SCHNEIDER,Changeover Switch : INDO ASIAN/ HAVELLS/ L&T).

Supply, fabricating, installing, testing, commissioning and electrically connected factory (CPRI Approved) made, LT Panel Board of approved size as recommended by IS & CPRI norms. (0.9x0.7x0.5) Mtr approx (LXHXD), Outdoor type, Floor Mounted 1100 Volts, made out of CRCA Sheet 3.0 mm thick for load bearing & 2.0 mm thick for non load bearing. Fully compartmentalised with IP 65 protection with base legs of 5.0 mm thick angle 600 mm long for 415 Volts, 3 Phase, 4 Wire AC Supply complete all as specified including provision of following accessories/ components housed in it. : I) 320 Amp, 4 Pole, 36 ka MCCB, Microprocessor Based ( Spreader Lincs incl) = 01 No. II) 800 Amp rated Al. bus bar with colour code TPN Mounted on epoxy insulators in Step formation = 01 Set ( set of 04 bus bars). iii) Earthing Terminal and cable glands. iv) Danger Notice plate for LT with conventional skull & bone duly riveted/ pasted to the PANEL BOARD door. (MCCB Make: INDO ASIAN/ HAVELLS/ L&T)

Supply, fabricating, installing, testing, commissioning and electrically connected factory (CPRI Approved) made, LT Panel Board of approved size as recommended by IS & CPRI norms. (0.9x0.7x0.5) Mtr approx (LXHXD), Outdoor type, Floor Mounted 1100 Volts, made out of CRCA Sheet 3.0 mm thick for load bearing & 2.0 mm thick for non load bearing. Fully compartmentalised with IP 65 protection with base legs of 5.0 mm thick angle 600 mm long for 415 Volts, 3 Phase, 4 Wire AC Supply complete all as specified including provision of following accessories/ components housed in it. : I) 320 Amp, 4 Pole, 36 ka MCCB, Microprocessor Based ( Spreader Lincs incl) = 01 No. II) 400 Amp rated Al. bus bar with colour code TPN Mounted on epoxy insulators in Step formation = 01 Set ( set of 04 bus bars). iii) Earthing Terminal and cable glands. iv) Danger Notice plate for LT with conventional skull & bone duly riveted/ pasted to the PANEL BOARD door. (MCCB Make: INDO ASIAN/ HAVELLS/ L&T)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. i) 3.5 core 95 sqmm (45 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. i) 3.5 core 95 sqmm (45 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. i) 3.5 core 95 sqmm (45 mm)