Housing And Urban Development Authority Tender
... More
The HIMUDA has issued a formal invitation for competitive bids for the Housing And Urban Development Authority project, for Construction Of One No. Laboratory Room, Construction Of Toilet Block And Development Of Ground At Govt. Sr. Sec. School Thalli Block Kalhel Distt. Chamba Hp Under Pm Shri Works in Chamba Hp, Himachal Pradesh, with an estimated contract value of Rs. 17,90,058. The bid opening date for this tender is 29-03-2025 and the last date for bid submission is 08-04-2025. Interested bidders for Housing And Urban Development Authority tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Housing And Urban Development Authority - HIMUDA Tender
Opening Date29 Mar 2025
Closing Date8 Apr 2025
Tender Amount₹ 17,90,058
Costs
EMD
₹ 35,800Document Cost
₹ 590Tender Fee
Refer Documents
Summary
Construction Of One No. Laboratory Room, Construction Of Toilet Block And Development Of Ground At Govt. Sr. Sec. School Thalli Block Kalhel Distt. Chamba Hp Under Pm Shri Works
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_HIMUD_103135_1Bid Award Id
ViewTender No
HIMUDA/DD/CB/W-7/2022-1328-53Tender Authority
Housing And Urban Development Authority ViewPurchaser Address
-Website
http://hptenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as approved by Engineer-in-charge including carriage of material in all lead & lifts.
62.16
95
5936.28
... More
Providing and fixing C.P. brass soap dish with C.P.brass brackets fixed to wooden plugs with C.P. brass screws as approved by Engineer in charge including carriage of material in all leads and lifts.
2
239
479.4
... More
Providing and fixing C.P. brass pillar tap wih capstan head 15 mm dia as approved by Engineer in charge including carriage of material in all leads and lifts.
2
676
1352.8
... More
Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of materials in all leads and lifts.
6
105
634.2
... More
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc, complete as approved by Engineer in charge including carriage of material in all leads and lifts. (i)110mm nominal size
4
162
648.8
... More
Providing and laying hand packed stone filling under floors including watering, ramming, consolidating and dressing complete including carriage of material in all lead & lifts.
4.6
1440
6628.14
... More
Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilevers in all heights.
15.17
7717
117069.92
... More
110 mm bend
2
224
448
... More
Providing and fixing 15 mm nominal bore C.P. connection pipe with brass unions 45 cm length including carriage of material in all leads and lifts.
2
108
217.6
... More
Providing and fixing C.P. brass push cock of approved quality and colour 15 mm nominal bore, 98 mm long as approved by Engineer in charge including carriage of material in all leads and lifts.
2
591
1183.6
... More
Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated ceiling surface, to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thouroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth as approved by Engineer-in-charge including carriage of material in all leads and lifts.
61.53
107
6632.93
... More
Providing and fixing on wall face 110 mm dia unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion as approved by Engineer-in-charge (i) Single socketed pipes including carriage of material in all lead & lifts.
6.9
353
2438.46
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design including carriage of material in all leads and lifts.(a) Inside size 80x80 cm and 50 cm deep including S.F.R.C. cover with frame (heavy duty) HD-20 grade designation 560 mm internal diametre (weight of cover & frame to be not less than 182 kg). (a) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
10545
10545.4
... More
Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) including carriage of material in all leads and lifts. (i) Powder coated aluminium (minimum thickness of powder coating 50 micron)
106.5
646
68873.55
... More
Providing and fixing C.P. brass 32 mm size bottle trap of approved quality & make and as approved by Engineer in charge including carriage of material in all leads and lifts.
2
1084
2169.6
... More
Providing and fixing PVC oval access door bend, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete as approved by Engineer in charge including carriage of material in all leads and lifts: (i) 110mm nominal size
4
280
1122.4
... More
Providing and fixing powder coated aluminium handles, ISI marked, anodised (powder coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as approved by Engineer-in-charge including carriage of material in all lead & lifts.
-
-
-
... More
20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) including carriage of material in all lead & lifts.
107.65
283
30508.01
... More
100mm.
4
56
224.8
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
52.14
440
22957.24
... More
110 mm Shoe
2
225
451
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 5 mm thickness (weight not less than 12.50 kg / sqm) including carriage of material in all leads and lifts.
0.82
1329
1090.35
... More
Providing throating or plaster drip and moulding to RCC chajjas etc. including carriage of material in all leads & lifts.
30.8
55
1694
... More
Centering and shuttering including strutting, propping etc. and removal of form for mass concrete including carriage of material in all lead & lifts.
-
-
-
... More
Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the walls and floors: (confirming to BIS Specifications) including carriage of materialn all leads and lifts.(i)110x90mm
6
756
4537.8
... More
Providing and laying Glazed vitrified floor tiles in any size in skirting (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete approved by Engineer-in-charge including carriage of material in all lead & lifts.
2.72
1452
3949.44
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including carriage of material in all lead & lifts.
-
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as approved by Engineer-in-charge including carriage of material in all lead & lifts.
139.34
140
19507.6
... More
Providing and fixing cup board selves 19mm thick, with Pre-Laminated flat pressed HDHMR Board exterior grade (Grade l ) decorative lamination with necessary screws and tape etc. complete as approved by the Engineer-in-Charge including carriage of material in all lead & lifts.
3.56
1811
6447.87
... More
Providing and laying cement concrete having strength of M-20 mixed design aggregate mechanically mixed and vibrated and curring complete excluding cost of form work and reinforcement for reinforced concrete works including carriage of material in all leads & lifts.
-
-
-
... More
Providing and fixing vtreous china water closet squatting pan (Indian type W.C Pan) size 580 mm earth work bed concrete including foot rest and trap as approved by Engineer in charge including carriage of materialn all leads and lifts.(i) Orrissa pattern
2
1719
3438
... More
Providing and fixing stoneware gully trap grade 'A' complete with C.I grating, brick masonry chamber in cement mortar 1:5 and water tight C. I. cover with frame of 300mmx300mm size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.72kg. I Square Mouth Traps : (i) 100mmx100mm size P type including carriage of material in all leads and lifts .
1
2492
2492.2
... More
Providing and fixing 19 mm thick Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) including carriage of material in all leads and lifts.
9.6
831
7983.36
... More
Kota stone slabs 20 mm thick in traeds & risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete i/c making nosing (Single piece) as approved by Engineer-in-charge including carriage of material in all lead & lifts.
5.76
1755
10112.26
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, including the cost of centering, shuttering and finishing: including carriage of material in all lead & lifts.
50.31
6782
341237.64
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
1803.19
96
173827.52
... More
Providing and fixing T-iron frames 50x50x5mm for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as approved by the Engineer-in-Charge including carriage of material in all lead & lifts.
67.2
122
8258.88
... More
Providing and fixing cup board shutters 19mm thick, with Pre-Laminated flat pressed HDHMR Board exterior grade (Grade l ) decorative lamination with necessary screws and bright finished stainless steel piano hinges, tape etc. complete as approved by the Engineer-in-Charge including carriage of material in all lead & lifts.
4.75
2070
9834.4
... More
250x10 mm
12
104
1252.8
... More
Providing and fixing 20 mm dia Brass full way valve with wheel (Heavy Duty) as approved by Engineer in charge including carriage of material in all leads and lifts.
4
442
1770.4
... More
Providing & fixing 4.0 mm thick glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with as approved by the Engineer-in-Charge including carriage of material in all lead & lifts.
1.8
915
1648.62
... More
Providing and placing on terrace (at all floor levels) 500 Litre capacity sintex/vectus polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes with fittings and without the base support for tank including carriage of material in all leads and lifts
2
4192
8385.8
... More
Providing and fixing powder coated aluminium hanging floor door stopper, ISI marked, anodised (powder coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete Single rubber stopper as approved by Engineer-in-charge including carriage of material in all lead & lifts.
4
76
305.2
... More
Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thouroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth as approved by Engineer-in-charge including carriage of material in all leads and lifts.
107.66
97
10453.79
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand). including carriage of material in all lead & lifts.
23.02
9084
209129.79
... More
Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including levelling up- with cement concrete 1:6:12 (1 cement:6 sand : 12 graded stone aggregate 20 mm nominal size) at plinth level in cement mortar 1:6(1 cement: 6 sand) including carriage of material in all leads and lifts.
23.28
5987
139382.02
... More
Providing and laying Glazed vitrified floor tiles in any size in flooring (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete approved by Engineer-in-charge including carriage of material in all lead & lifts.
46.08
1430
65908.22
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including carriage of material in all lead & lifts.
10.33
5886
60806.51
... More
Providing and fixing powder coated aluminium sliding door bolts, ISI marked anodised (powder coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete as approved by Engineer-in-charge 300x16 mm. including carriage of material in all lead & lifts.
6
251
1507.2
... More
40 mm thick with 20 mm nominal size stone aggregate Cement concrete flooring 1:2:4 (1 cement : 2 coarse : sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete including carriage of material in all lead & lifts
58.8
492
28935.48
... More
Providing and fixing white vitreous china flat back urinal basin of 430x260x350 mm sizes respectively as approved by Engineer in charge including carriage of material in all leads and lifts.
2
2113
4227
... More
Providing and fixing Vitreous China Division Plate for Urinals 600mm x 300 as approved by Engineer in charge including carriage of material in all leads and lifts.
1
2352
2352.8
... More
Providing weepholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slope of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 including carriage of material in all lead & lifts.
10
266
2664
... More
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes including fixing with approved adhesive as approved by Engineer in charge including carriage of material in all leads and lifts: (confirming to BIS Specifications) (i)110mm nominal size
14.8
347
5144.48
... More
15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand). including carriage of material in all lead & lifts.
128.19
265
34060.08
... More
6 mm cement plaster to ceiling of mix :1:3 (1 cement : 3 fine sand). including carriage of material in all lead & lifts.
61.53
234
14447.24
... More
Applying cement slurry on R.C.C . slab or cement concrete work using 2.75 kg of cement per sqm. of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete including carriage of material in all leads and lifts.
58.8
43
2569.56
... More
Providing and fixing powder coated aluminium tower bolts, ISI marked, anodised (powder coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all lead & lifts.
-
-
-
... More
Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 as approved by Engineer in charge including carriage of material in all leads and lifts.
6
577
3465.6
... More
Providing and fixing 20 mm nominal outer dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as approved by Engineer in charge.
30
318
9549
... More
Providing and fixing Size 450x300x150 mm white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass tap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required as approved bythe Engineer-in-Charge including carriage of material in all lead & lifts.
1
4831
4831.1
... More
150x10 mm
4
86
344.8
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of material in all leads and lifts.
2
1045
2091.8
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of material in all lead & lifts.
26.77
526
14105.11
... More
Providing and laying antiskid floor tiles of any size & colour (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. as approved by Engineer -in-charge including carriage of material in all leads and lifts.
7.2
1428
10281.6
... More
Providing and fixing C.P. brass Bib tap wih capstan head 15 mm dia as approved by Engineer in charge including carriage of material in all leads and lifts.
2
662
1324.4
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
106.5
688
73346.55
... More
Providing and fixing PVC collars fixing with approved adhesive as approved by Engineer in charge including carriage of material in all leads and lifts . (i) 110mm nominal size
4
127
508
... More
125 mm.
12
70
843.6
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) Non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws including carriage of material in all leads & lifts.
6.3
2708
17063.55
... More
Painting Steel work with Deluxe Multi Surface Paint to give an even shade Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture as approved by Engineer-in-charge including carriage of material in all lead & lifts.
2.52
109
275.18
... More
Providing and fixing 8 mm thick Pre-Laminated HDHMR Board in partitions etc. with necessary screws complete as approved bythe Engineer-in-Charge including carriage of material in all lead & lifts.
4.75
687
3264.2
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil. including carriage of material in all lead & lifts.
380.34
229
87097.86
... More
Suspended floors, roofs, landings, balconies and access platform.
94.22
486
45819.19
... More
Half brick masonry using 2nd class common burnt clay building bricks in superstructure above plinth up to floor V level in cement mortar 1:4 (1 cement: 4 sand) including carriage of material in all leads and lifts.
7.2
1142
8226
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Chamba Hp, Himachal Pradesh