Housing And Urban Development Authority Tender
... More
The HIMUDA has issued a formal invitation for competitive bids for the Housing And Urban Development Authority project, for Housing Colony At Sheel Near Solan Distt Solan Hp Sh Construction Of 16 Nos Cat Ii 2bhk Flats With Parking And Attic Floors In 2 in Solan, Himachal Pradesh, with an estimated contract value of Rs. 11,07,48,838. The bid opening date for this tender is 22-01-2025 and the last date for bid submission is 11-02-2025. Interested bidders for Housing And Urban Development Authority tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Housing And Urban Development Authority - HIMUDA Tender
Opening Date22 Jan 2025
Closing Date11 Feb 2025
Tender Amount₹ 11,07,48,838
Costs
EMD
₹ 21,07,500Document Cost
₹ 5,900Tender Fee
Refer Documents
Summary
Housing Colony At Sheel Near Solan Distt Solan Hp Sh Construction Of 16 Nos Cat Ii 2bhk Flats With Parking And Attic Floors In 2
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_HIMUD_98476_1Bid Award Id
ViewTender No
HIMUDA ND CB E-TENDER2024-5859-68 DT 21.01.2025Tender Authority
Housing And Urban Development Authority ViewPurchaser Address
-Website
http://http://himuda.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
150x10 mm
1112
14
16513.2
... More
40 mm dia
16
21
341.6
... More
90 mm nominal size.
540.8
343
185954.08
... More
32mm nominal bore
32
21
683.2
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) including carriage of material in all leads and lifts
1560
165
258414
... More
Providing and fixing 10mm thick Eco -pinewood panelling on wall including 9 mm thick plywith necessary screws complete in all respects including carriage of material in all leads and lifts
161.28
2574
415150.85
... More
20mm nominal bore
16
14
228
... More
Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2 mm thick water proofing membrance, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrance manufacture of density at 25°C, 0.87 - 0.89 kg/ litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/ 5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane.
1999.32
420
840114.26
... More
110mm nominal size.
48
260
12496.8
... More
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. including carriage of material in all leads and lifts
800
93
74640
... More
Providing and fixing Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-in charge.including carriage of material in all leads and lifts.INTERNAL WORK - EXPOSED ON WALL 1216 (16 mm OD) pipe
1819.6
212
386665
... More
90mm nominal size.
32
240
7694.4
... More
Providing and fixing 40mm thick wire guage shutters using galvanised M.S guage of I.S.guage designation 85 G with wire of dia 0.56mm for doors, windows & clerestory windows including bright finished black enamelled iron butt hinges with necessary screws etc I/c chamfered edged beading 20x12.5mm size.complete including carriage of material in all leads .and lifts. (a) 1st class ivory coast wood.
305.26
3691
1126836.76
... More
Providing Stone filling behind retaining walls including carrage of material in all leads &lifts.
1116.56
1810
2021308.57
... More
Fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required but excluding fittings Hindware/ Cera make including carriage of material in leads and lifts. White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (Labour Rate)
32
1021
32699.2
... More
300x16 mm
44
46
2063.6
... More
12 mm cement plaster finished with a floating coat of neat cement of mix including carriage of material in all leads & lifts. 1:4 (1 cement: 4 fine sand)
24
308
7414.8
... More
Providing and fixing 40mm nominal bore galvanised M.S. Tube(light grade) out let in cement mortar 1:3(1 cement: 3 Sand) including carriage of material in all leads and lifts.
26.4
1446
38196.84
... More
Fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. including carriage of material in all leads & lifts. (Labour Rate)
32
57
1840
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up tofloor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).
2.06
10193
20997.99
... More
Fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete including carriage of material in all leads and lifts. (Labour Rate)
64
91
5875.2
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:4 (1 cement :4 coarse sand) including carriage of material in all leads and lifts.
648.5
1167
756961.63
... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. Complete including carriage of material in all leads and lifts.
3619.52
170
618394.99
... More
Providing and laying cement concrete in retaining walls,return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing including carriage of material in all leads and lifts 1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size)
1940.34
8458
16411589.75
... More
6 mm cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand) including carriage of material in all leads and lifts.
2002.2
205
411351.99
... More
Fixing C.P. Brass angle valve 15 mm without/with nuts Including carriage of material in all leads and lifts.15 mm dia (Labour Rate)
192
32
6182.4
... More
Fixing Stainless steel floor door stopper with necessary screws etc. complete including carriage of material in all leads and lifts. (Labour Rate)
148
6
947.2
... More
Providing and Fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : but excluding fitting including carriage of material in all leads and lifts(i)Kitchen sink with drain board including carriage of material in leads and lifts. 510x1040 mm bowl depth 250 mm
16
5460
87364.8
... More
Fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required Including carriage of material in all leads & lifts W.C. pan with ISI marked white solid plastic seat and lid including carriage of material in leads and lifts. (Labour Rate)
32
2492
79774.4
... More
Fixing C.P. brass bib cock of approved quality conforming to IS standards and weighing not less than 690 gms..15mm dia (Labour Rate)
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding in all depth/ in width as well as all sqm on plan) including getting out and disposal of excavated earth upto all leads and lifts as directed by Engineer-incharge., when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing off all surplus excavated earth as directed by the Engineer-in- charge. Ordinary rock.
40.78
326
13322.83
... More
110mm nominal size.
36
156
5634
... More
Providing and fixing flush door shutters interior grade, green membrane type, core of black-board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters.35 mm thick including black enamelled M.S. butt hinges with necessary screws all complete as per drawing and specification and instructions of Engineer-in-charge including carriage of material in all leads and lifts.
260.02
4019
1045267.4
... More
Providing and fixing 6mm thick HPL Clading on wall with necessary screws complete in all respects including carriage of material in all leads and lifts
208.64
5281
1101848.7
... More
Short Body
32
32
1052.8
... More
Stairs, (excluding landings) except spiralstaircases
117.04
699
81822.66
... More
Fixing 15 mm C.P. mixer for kitchan sink with top/ bottom swinging spout Including carriage of material in all leads and lifts. (Labour Rate)
16
21
341.6
... More
Fixing C.P. brass towel ring with Plastic Gitti, Drilling hole etc complete in all respects Including carriage of material in all leads and lifts. (Labour Rate)
32
21
683.2
... More
Providing and fixing Ist quality digital glazed wall tiles conforming to IS: 15622 (thickness thicknes not less than 8mm), of approved make, in all colours, shades of any size as approved by Engineer-in-Charge i/c cost for cutting the tiles whwrever required, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of material in all leads & lifts.
905.42
1021
924886.53
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern
1116.56
997
1114271.05
... More
Providing and fixing (ISI marked) PVC floor trap of self cleaning design i/c fixing with approved adhensive with C.P. screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors including carriage of material in all leads and lifts.110x90 mm
80
1126
90104
... More
90mm nominal size.
48
230
11061.6
... More
Fixing toilet paper holder including carriage of material in all leads and lifts. C.P. Brass (Labour Rate)
32
169
5430.4
... More
Flushing (600 mm over all girth)
75.2
529
39799.6
... More
32mm nominal bore
32
14
462.4
... More
Cement concrete 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
79.24
6284
498015.48
... More
Ridges or hips plain (500 - 600mm)
116.06
569
66142.59
... More
150mm nominal size.
16
334
5348.8
... More
Fixing PVC connection pipe Including carriage of material in all leads and lifts. 15mm dia 45 cm. length. (Labour Rate)
128
19
2464
... More
Cutting holes through existing brick work including making good the same in cement mortar 1:6 (1 cement: 6 sand) per CMs depth of cutting (i) Holes upto and including 400 sqcm in area including carriage of material in all leads and lifts
1472
4
6182.4
... More
In gratings, frames, guard bar, ladder,railings, brackets, gates and similar works
6605.6
146
966399.28
... More
Providing and fixing (ISI marked) PVC cowl i/c fixing with approved adhensive etc complete including carriage of material in all leads and lifts.
-
-
-
... More
Fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. Including carriage of materia in all leads and lifts. (Labour Rate)
32
19
616
... More
Fixing two hole basin mixing Faucet Including carriage of material in all leads and lifts. (Labour Rate)
32
25
819.2
... More
Fixing wall mixing faucet for shower and bath with overhead pipe (1210cm) and bath shower including carriage of material in all leads & lifts. (Labour Rate)
32
49
1593.6
... More
Providing and laying Vitrified tiles as per sample approved by the Engineer-in-Charge (thickness not less than 8mm thick)with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete including carriage of material in all leads & lifts.
215.98
1569
339013.01
... More
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge
367.02
8258
3030869.51
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
3237.87
527
1706357.49
... More
Edges of slabs and breaks in floors and walls
531.2
167
88843.2
... More
Constructing Plain Cement Concrete 'U' shape open surface drain with side wall. 15x22 cm in 10 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement including formwork and excavation of drain and channel complete as per standard design Including carriage of material in all leads and lifts.
152
1902
289119.2
... More
P/F PVC Single equal branch ISI marked of required degree with oval access door insertion rubber washer 3mm thick bolts and nuts complete i/c fixing with approved adhensive etc complete including carriage of material in all leads and lifts
-
-
-
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete including carriage of material in all leads and lifts. For pipes 100 to 250 mm diameter
2
578
1157.9
... More
On Ceiling.
2002.2
209
419460.9
... More
Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc.complete including carriage of material in all leads and lifts
-
-
-
... More
Fixing stainless steel sliding door bolt transparent or dyed to required colour and shade with bolts, nuts and screws etc. complete including carriage of material in all leads & lifts. (Labour Rate)
-
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, Trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material in all leads and lifts.
-
-
-
... More
Brick work 7 cm thick with common burnt clay F.P.S. (non modular) brick of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth level and upto floor five level including carriage of material in all leads & lifts.
21.6
827
17874
... More
Centering and shuttering including strutting, propping etc. and removal of form including carriage of material in all leads and lifts.
-
-
-
... More
Suspended floors, roofs, landings, balconies and access platform
2007.32
608
1221353.85
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- in-charge including carriage of material in all leads and lifts. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level
236.56
9813
2321375.11
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete including carriage of material in all leads and lifts. 40 mm thick with 20 mm nominal size stone aggregate
33.5
501
16810.3
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat withcement primer including carriage of material in all leads and lifts.
-
-
-
... More
Providing and fixing PVC Plain bend ISI marked complete i/c fixing with approved adhensive etc complete including carriage of material in all leads and lifts
-
-
-
... More
Providing and fixing PVC pipe of ISI market 100 mm. dia for weep holes in brick masonry / stone masonry/ reinforced cement concrete R/wall, including carrage of material in all leads &lifts.
1534.66
323
496692.71
... More
Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) i/c carriage of material in all leads and lifts.
301.58
2044
616429.52
... More
Earth work in excavation by mechanical means (hydraulic Excavator)/ Manual Means over areas (up to all depth and width as well as on plan) including getting out and disposal of excavated earth upto all leads and lifts as directed by the Engineer-in-Charge. All kinds of soil.
8864.23
170
1514896.91
... More
Fixing 8 mm dia C.P. / S.S. health faucet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. (Labour Rate)
32
14
456
... More
Applying cement slurry on R.C.C . slab or cement concrete work using 2.75 kg of cement per sqm. of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete including carriage of material in all leads and lifts.
1998.52
38
76943.02
... More
40 mm nominal bore
16
21
341.6
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design including carriage of material in all leads & lifts.
-
-
-
... More
32mm dia
32
21
683.2
... More
Providing and fixing C.P. connection pipe with brass union Including carriage of material in all leads and lifts.15mm dia 45 cm. length.
64
186
11926.4
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
1175.28
609
716450.69
... More
Providing and fixing Graphite gray coloured precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. including carriage of material in all leads and lifts.(JSW/TATA/ Bhushan Make)
891.3
880
784433.13
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 180x150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
16
2594
41507.2
... More
Providing and laying in trenches, galvanised mild steel tubes (medium grade), tube ittings (earth work in trenches to be measured and paid separately including carriage of material in all leads and lifts.
-
-
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete including carriage of material in all leads & lifts. Fixed to openings /wooden frames with rawl plugs screws etc.
9390
191
1798185
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of material in all leads and lifts.
125.78
721
90693.67
... More
Inside size 120x90 cm and 90 cm deep including S.F.R.C. manhole frame and cover (medium duty) 560 mm internal diameter, total weight of cover and frame to be not less than 173 kg (weight of cover 70 kg and weight of frame 103 kg) with 230mm thick walls of common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
21223
212237.5
... More
90mm nominal size.
32
85
2731.2
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality including carriage of material in all leads & lifts. H D - 20 Circular shape 560 mm internal diameter
2
1533
3066.3
... More
110mm nominal size.
32
277
8876.8
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including carriage of material in all leads and lifts
10.56
8835
93304.99
... More
150mm nominal size.
14
248
3485.3
... More
Providing and fixing high pressure PVC spigot and socket soil, waste and ventilating pipe ISI marked i/c fixing with approved adhensive (i/c PVC clips where ever required) including carriage of material in leads and lifts.
-
-
-
... More
110mm nominal size.
34
270
9190.2
... More
Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: including carriage of material in all leads and lifts. Cement Mortar 1:4 (1 cement : 4 coarse sand).
114.34
7901
903480.38
... More
90mm nominal size.
16
110
1775.2
... More
Cement concrete 1:5:10 (1 Cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
280.88
5961
1674438.03
... More
Smooth finishing of the exposed surface of R.C.C. Work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand) including carriage of material in all leads & lifts.
161.64
209
33847.42
... More
20mm nominal bore
64
281
17996.8
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including carriage of material in all leads and lifts 1000 litres net capacity storage tank of ISI marked sintex make with double.layer including MS Stays for water storage tank.
16
8791
140656.8
... More
Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183,density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building.Make: Gyptech / Armstrong / Hunter Douglas / Anutone / Saint Gobain. (Contractor will provide MTC given by Manufacturer before billing)
566.5
572
324491.2
... More
100 mm
628
8
5243.8
... More
90mm nominal size.
16
153
2458.4
... More
125 mm
392
8
3371.2
... More
Providing and fixing 10mm thick Eco -pinewood on ceiling including 9 mm thick ply with necessary screws complete in all respects including carriage of material in all leads and lifts
405.22
2602
1054625.57
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) including carriage of material in all leads and lifts.150mm nominal size. Class I
2
6239
12478.3
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : including carriage of material in all leads & lifts.1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size)
2.92
8377
24463.61
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)including carriage of materialin all leads and lifts.
85.52
9468
809724.74
... More
Supplying and fixing 2.00 H.P. motor for lifting the water from RWHT to PVC tank including carriage of material in all leads and lifts. Note:- The prefered make for materials for Civil/Sanitary works as per SDB Page No. 82 and 83.
2
17818
35637
... More
Long Body
16
39
633.6
... More
40 mm nominal bore
16
14
231.2
... More
Fixing brass full way valve with wheel Including carriage of material in all leads and lifts. (Labour Rate)
-
-
-
... More
Providing and fixing G.I./M.I Union of following sizes (Where not included in the items.Including carriage of material in all leads and lifts.
-
-
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of material in all leads & lifts.
63.1
2343
147878.01
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications including carriage of material in all leads and lifts. Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
214.58
118
25502.83
... More
Fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete including carriage of material in all leads &lifts. (Labour Rate)
16
169
2715.2
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge including carriage of material in all leads and lifts.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
262.02
4606
1207099.94
... More
Earth work in excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (upto all width on plan), including dressing of sides and ramming of bottoms upto all lifts including getting out the excavated soil and disposal of surplus excavated soils upto all leads and lifts as directed, within all lead. All kinds of soil.
928.15
242
225029.97
... More
Providing chases 75mm wide 50mm deep (average size) in walls for conduit pipes and filling the same with cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregate 20 mm and down gauge) after the conduit pipe is laid (excluding the cost of conduit pipe) including carriage of materialin all leads and lifts.
1366
121
165490.9
... More
In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
31195.5
119
3716943.83
... More
150mm nominal size.
315
1598
503574.75
... More
Fixing M.I Union for Wash basin & Sink Including carriage of material in all leads and lifts. 32mm nominal bore (Labour Rate)
-
-
-
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : including carriage of material in all leads and lifts.
-
-
-
... More
300x10 mm
248
14
3682.8
... More
Cement concrete 1:6:12 (1 Cement : 6 coarse sand :12 graded stone aggregate 40 mm nominal size)
78.42
5832
457357.2
... More
15mm nominal bore
64
221
14176
... More
Providing and laying cement concrete 1 : 8 : 16 (1 cement:8 sand:16 graded stone aggregate 40 mm nominal size) and curing complete on depreesd portion excluding cost of form work screed laid under floor including carriage of materialin all leads and lifts.
94.12
5666
533373.33
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- in-charge including carriage of material in all leads and lifts. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works above plinth level upto floor V level
856
10463
8956584.8
... More
250x10 mm
168
14
2494.8
... More
15 mm nominal bore
320
239
76528
... More
Weather shade, Chajjas, corbels etc., including edges
161.64
728
117827.48
... More
Fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap i/c carriage of material in all leads & lifts. (Labour Rate)
80
14
1140
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete including carriage of material in all leads and lifts
6946.3
183
1277424.57
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). including carriage of material in all leads and lifts.
5835.96
682
3981875.51
... More
Providing and laying vitrified floor tiles as per sample approved by the Engineer-in-Charge(thickness not less than 10mm) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of material in all leads & lifts.
1266.92
1537
1947509.42
... More
110mm nominal size.
18
196
3533.4
... More
Providing & fixing 40mm thick single/double leaf fully glazed window shutters made of 1st class ivory coast teak wood having styles & top rail & bottom rail 75mm width and chamferred edged beading 20x12mm for glass panes complete including bright finished/black enamelled iron butt hinges with necessary screws including carriage of material in all leads and lifts.
187.8
4596
863269.65
... More
Shoe (Plain) 110 mm Shoe
24
121
2904
... More
20 mm cement plaster on the rough of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) on rough side wall including carriage of material in all leads & lifts.
2924.76
328
962099.8
... More
20mm nominal bore
16
379
6070.4
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections Including carriage of material in all leads and lifts.
2984.7
53
158338.34
... More
Gutter/ valley (600 mm over all girth)
190.12
1029
195814.09
... More
Extra for depth for manholes :Size 120x90 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1.5
10684
16026.3
... More
Polishing in high gloss/matt finish melamine clear polish on wood work in required color /wooden shade texture with following process in the sequence as detailed below:
1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)
1247.36
1362
1699777.47
... More
Providing and fixing M.S. holder bat clamps of approved design to PVC / C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc including carriage of material in all leads and lifts. 100 mm diameter
96
307
29553.6
... More
Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood 50x50 mm (base and height)
197.88
325
64360.47
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) including carriage of material in all leads & lifts
2.52
9824
24758.75
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes i/c carriage of material in all leads and lifts. 110 mm diameter (Finolex/ Supreme)
373
297
110855.6
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering including carriage of material in all leads & lifts. All work up to plinth level.
-
-
-
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil including carriage of material in all leads and lifts.
444.58
157
69910.21
... More
250x16 mm
84
46
3939.6
... More
Foundations, footings, bases of columns,etc. for mass concrete
295.82
251
74443.1
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level / above plinth level including cost of binding wire including carriage of materialin all leads and lifts. Thermo-Mechanically Treated bars of grade Fe-500D or more
225489.7
104
23529850.2
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, frames and fixed in position including carriage of material in all leads and lifts.(a) Ivory coast teak Wood
24.42
125643
3068224.04
... More
Fixing stainless steel tower bolt (barrel type) annodized transparent or dyed to required shade and colour with screws etc. complete including carriage of material in all leads & lifts. (Labour Rate)
-
-
-
... More
Making connection of galvanised steel distribution branch with galvanised mild steel main 25mm to 40 mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material in all leads and lifts:
16
628
10056
... More
Providing and fixing glass panes, with wooden fillets wherever necessary including carriage of material in all leads and lifts. Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)
211.08
1175
248177.31
... More
Providing and laying cement concrete 1 : 8 : 16 (1 cement:8 sand:16 graded stone aggregate 20 mm nominal size) and curing complete on slab & floor excluding cost of form work screed laid under floor including carriage of materialin all leads and lifts.
100.3
5697
571474.3
... More
Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant of any size & colour manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads & lifts.
444.58
1637
727933.06
... More
110mm nominal size.
318
480
152814.9
... More
Stone soling properly handpacked filling interstices with Kharanja stone and consolidating with hand ramming to the required level including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 100 mm spread thickness (finished work including materials and labour)including carriage of material in all leads & lifts.
209.56
1193
250109.86
... More
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives including carriage of material in all leads and lifts. New work (Two or more coats applied @1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
2173.9
139
302389.49
... More
Providing and fixing PVC Collar i/c fixing with approved adhensive etc complete including carriage of material in all leads and lifts
-
-
-
... More
Fixing stainless steel handles annodized transparent or dyed to required colour or shade with necessary screws etc. complete including carriage of material in all leads & lifts. (Labour Rate)
-
-
-
... More
Fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Including carriage of material in all leads and lifts. Flexible pipe (Labour Rate)
-
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion i/c carriage of material in all leads and lifts(Finolex/ Supreme)
-
-
-
... More
Providing and Fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers including carriage of material in all leads & lifts.
32
1238
39640
... More
Fixing C.P. Brass shower rose with 15mm or 20mm inlet Including carriage of material in all leads & lifts 150mm dia (Labour Rate)
32
11
366.4
... More
150mm nominal size.
16
744
11904.8
... More
Lintels, beams, plinth beams, girders,bressumers and cantilevers
2114.9
516
1092768.83
... More
Fixing C.P. brass towel rail complete with C.P. Brass brackets fixed with Plastic Gitti, drilling hole, C.P. brass screws etc complete in all respects including carriage of material in all leads and lifts.600mmx20 mm (Labour Rate)
32
315
10102.4
... More
Fixing Stainless steel hook & eyes with necessary screws or welding to chowakat including carriage of material in all leads and lifts.150mm. (Labour Rate)
628
4
2826
... More
Inside size 90x80 cm and 45 cm deep including S.F.R.C. manhole frame and cover (medium duty) 560 mm internal diameter, total weight of cover and frame to be not less than 173 kg (weight of cover 70 kg and weight of frame 103 kg) with 230mm thick walls of common burnt clay F.P.S. (non modular) bricks of class designation 7.5
20
12053
241068
... More
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. Brass screws and PVC sleeves etc., wherever necessary complete including carriage of material in all leads and lifts. 20 mm dia
414.8
463
192114.62
... More
On Wall
4544.12
167
760004.07
... More
Providing and Fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Including carriage of material in all leads and lifts.
32
796
25497.6
... More
Applying priming coat including carriage of material in all leads and lifts. With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
563.4
55
31268.7
... More
150mm nominal size.
8
360
2886.8
... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard designincluding carriage of material in all leads and lifts. With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
2
10190
20381.4
... More
Providing wood work in frames of false celling partitions etc. sawn and put-up in position including carriage of material in all leads and lifts. 1st class Kail wood
1.7
98104
166777.82
... More
Excavating trenches of required width for pipes, cables,etc including excavation for sockets, and dressing of sides, ramming of bottoms, upto all depth, including getting out the excavated soil, and then returning the soil as required, in layers upto all depth, including onsolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil upto all leads and lifts as directed by the Engineer-in-Charge.
128.7
328
42277.95
... More
Bend 87.5° 110 mm bend
44
138
6074.2
... More
Fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 15 mm nominal bore (Labour Rate)
32
32
1052.8
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Solan, Himachal Pradesh