Dr Yashwant Singh Parmar University Of Horticulture And Forestry Tender

Wiring for power plug with 4x4 Sq.mm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No. 4 Sq.mm HRFRLS / PVC insulated single core copper conductor cable for ear thing as required complete in all respect as per satisfaction of Engineer-in-charge.

Wiring for circuit/sub-main with 4x16 Sq, mm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No. 16 Sq.mm (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable of same size for ear thing as complete in all respect as per satisfaction of Engineer-in-charge.

Supplying & fixing metal box of following size (nominal size) on surface or in recess suitable for fixing phenol laminated sheet cover in front including painting etc. as required complete in all respect as per satisfaction of Engineer-in-Charge.

a). 180mmx100x60mm deep sizes

b). 200mmx150x75mm deep sizes

Supplying and fixing ceiling rose on the existing junction box/wooden block including connection etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

Supplying & fixing following rating Piano-type switch/socket on the existing switch box/cover including connections etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

a). S.P. 5/6 amps one way switch, piano type.

b). S.P. 15/16 amps one way switch, porcelain base / piano type.

c). 5 pin 5/6 amps socket outlet, porcelain base / piano type.

d). 6 pin 15/16 amps socket outlet, porcelain base / piano type.

Supplying & fixing Bakelite batten / angle holder including connections etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S..angle iron 50mm x 50mm x 6mm thick duly welded complete with 3mm thick M.S. sheet fixed with hinges as open able front complete with locking arrangement including painting and bonding to the existing earth as required in all respect as per satisfaction of Engineer-in-charge

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation made from (50 mm x 50 mm x 6 mm thick) M.S. angle iron frame, covered with 1.6 mm thick M.S. sheet duly welded on five sides & front side hinged, complete with locking arrangement with sufficient No. vertical and horizontal intermediate switchgear supporting members each of M.S. flat 50mmx6mm thick of suitable length duly welded. The cubical pedestal shall have cable entry box at one or two sides and 4 No. legs of 50mmx50mmx6mm thick M.S. angle iron each 60 cm long including, powder coated painting and bonding to the existing earth etc., the same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form complete in all respect as per satisfaction of Engineer-in-charge. a). 300mm deep (Nominal).

Supplying and fixing copper strip bus-bars suitable for 100 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx3.17mm), in the existing enclosure with all accessories including connections etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

Supplying and fixing copper strip bus-bar suitable for 200 Amp. 415 volts capacity four nos. each of cross sectional area (25.4mm x 4.75mm) in the existing enclosure with all accessories including all connection etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

Supplying and fixing copper strip bus-bars suitable for 400 Amp. 415 volts capacity 4 No. each of cross-sectional area (38.10mmx6.35mm), in the existing enclosure with all accessories including connections etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required complete in all respect as per satisfaction of Engineer-in-charge. a)Single pole. Cat-A.

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

a). 100 Amp. – 16 KA

b). 250 Amp. – 25 KA

c). 315/400 Amp. – 50 KA

Supplying and fixing single pole, blanking plate in the existing MCB DB as required complete in all respect as per satisfaction of Engineer-in-charge.

Supplying and fixing 63 Amps. Cat-A rating, four poles, 415 volts, Isolator in the existing MCB DB complete with connections, testing and commissioning etc. requires complete in all respect as per satisfaction of Engineer-in-charge.

Supplying and fixing 63 Amps. Cat-A, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB),having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

Supplying and fixing of double door – 6way (8+18), horizontal type. triple pole and neutral sheet steel MCB distribution board, 415 volts, on surface / recess, with provision for 4-pole MCB / isolator / RCCB / RCBO as incomer and SP MCBs as outgoing, complete with tinned copper bus-bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

Earthing with copper earth plate 600mm x 600mm x 3mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and water pipe etc. (but without charcoal or coke and salt) complete as required complete in all respect as per satisfaction of Engineer-in-charge.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required complete in all respect as per satisfaction of Engineer-in-charge.

Supplying and laying 8 SWG copper wire at 0.50 Rmt. below ground level for earth electrode conductor, including soldering etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

Providing and fixing 25mmx5mm copper strip on surface or in recess for earth connections etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

Providing and fixing of lighting conductor finial, made of 25mm dia, 300mm long copper tube, having single prong at top, with 85mm dia 3mm thick copper base plate including holes etc. complete as required complete in all respect as per satisfaction of Engineer-in-charge.

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lighting conductor as required (for horizontal run) complete in all respect as per satisfaction of Engineer-in-charge.

Providing, laying and fixing of one no. aluminium conductor, PVC insulated and PVC sheathed, armored / XLPE power cable, working voltage 1100 volts grade on surface etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

a). Armoured cable 70 Sq.mm (3.5 core)

b). Armoured cable 240 Sq.mm (3.5 core)

Providing & installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required complete in all respect as per satisfaction of Engineer-in-charge(Usha/ bajaj/ phillip’s/ Havell’s/ Crompton/ Great white make)..

a). Exhaust fan, Light duty (Domestic), 225mm sweep.

b). Exhaust fan, Heavy duty 380mm sweep.

Supplying, installation, testing and commissioning of indoor lighting LED luminaire surface T5M batten size of 4’-0” and wattage 20 watt Anodized extracted aluminium housing high transmissibility diffuser with high lumen output as required complete in all respect as per satisfaction of Engineer-in-Charge (Panasonic / Great white / Jaguar / Bajaj make).

Supplying, installation, testing & commissioning of 400 mm wall fan as required etc. complete in all respect as per satisfaction of Engineer-in-charge ( Usha/ Bajaj/ Havell’s/ Crompton make).

Supplying and erection of street light bracket made of GI pipe ‘A’ class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt and nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respect as per satisfaction of Engineer-in-charge. a). 32mm dia. G.I. pipe, heavy class.

Supplying, installation, testing and commissioning of outdoor street light LED 45 watt with 16/0.20mm twin twisted flexible, cotton braided, copper cable and allied accessories etc. as required complete in all respect as per satisfaction of Engineer-in-charge (Usha/ bajaj/ phillip’s/ Havell’s/ Crompton/ Jaquar/ Great white make).

Providing and fixing digital Ammeter, CTs, three phase indicating lamp, digital voltmeter and fuse as required in the existing panel including making necessary connection etc. complete in all respect as per satisfaction of Engineer-in-Charge.