Zilla Parishad Tender

... More
The Zilla Parishad has issued a formal invitation for competitive bids for Bhurt Wala- Construction Of Primary Health Centre (phc) At Village Bhurt Wala, Block Ellenabad, Distt. Sirsa.(xv-fiance Commission And State Budget Head-4210) Re-tender in Sirsa, Haryana, with an estimated contract value of Rs. 3,93,41,802. The bid opening date for this tender is 07-11-2026 and the last date for bid submission is 20-11-2026. Interested bidders for Zilla Parishad tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Zilla Parishad Tender - Haryana Tender

Opening Date7 Nov 2026
Closing Soon20 Nov 2026
Tender Amount₹ 3,93,41,802 
Notes
Download

Costs

  • EMD

    ₹ 7,86,836
  • Document Cost

    ₹ 15,000
  • Tender Fee

    ₹ 1,000

Description

Bhurt Wala- Construction Of Primary Health Centre (phc) At Village Bhurt Wala, Block Ellenabad, Distt. Sirsa.(xv-fiance Commission And State Budget Head-4210) Re-tender

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Supply of DC Operation, High Sound Output with Low Current Consumption, Designed for Use within Fire Alarm Systems, Security Systems and Industrial Signaling Systems, It provides an Audio Warning, Which is Suitable for Place, Which Needs Audio Indication Product SpecificationMake Agni

5

-

-

... More
SITC of 2 core 1.5 Sq mm Cable

600

-

-

... More
SITC of Photoelectric Smoke Detector. NS

41

-

-

... More
Supplying, installation, setting, testing and commissioning of differential type pressure switches of size 100 mm dia for pressure range upto 10Kg/cm2 for operation of filter feed pumps.( NS ITEMS )

3

-

-

... More
PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia.

600

-

-

... More
SITC of Micro processor based 2 wire fault tolerant, networkable type fire alarm / detection control panel ( having nos. of 2 loops to suit minimum 20% extra over the nos. of fire detectors. The panel shall be able to give location of all fire / fault conditions of addressable units via the address codes. Further, the panel must be able to automatically switch ON/OFF respective control module when ever any alarm is triggered. The panel shall have rectifier, loop cards, minimum 160 character L C D unit/ 5.7’’TFT to indicate Fire / Fault Signal with address and analog output, external/inbuilt printer to log all fire or fault events complete in all respects. The Panel Shall be sheet Steel power coated, sealed to IP30. The Panel shall have 20 Zones with individual LED Indicators, expandable to 80LED Indicators. The Panel shall have 3 Serial Ports. The panel shall have a built in power supply and battery charger along with maintenance free 24 AH,2 x 12 volt SMF lead acid batteries capable of running for a minimum of 24 hours with battery charger complete as required. And conforming to BS5839 standards and Duly Approved by EN 54/UL/VDS/ as per specifications complete in all respect up to the entire satisfaction of Engineer-in – charge of work Makes : Honeywell Morley/ Siemens cerberus/ GST.

1

-

-

... More
Supply Installation Testing and Commissioning of addressable multisensor detector with a combination of Optical and Thermal including mounting base, auto addressing feauture as required. Detetctor should have 2 as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 requirements. High resistance to electromagnetic effects in accordance with EFSG agreement EFSG/F/97/005 .Detector should monitor Electromagnetic interference and report to the panel - current and average values. EMC safety for detector shall be 50 V/m. Shall be EN54/ VDs/UL certification. (Detectors without Inbuilt Isolators may be considered with an additional Isolator Module after 20 devices) Make: Honeywell Morley / Siemens Cerberus / GST

130

-

-

... More
Supply, installation, testing and commissioning of intelligent Analog Addressable type Manual Call Point having Surface or flush mounting option fully compliat to EN 54 having Rotary Decade switches for addressing with back box for mounting as required conforming to BS5839 standards and duly approved by EN54/UL/VDS required to complete the job in all respect Makes: Siemens / Honeywell/ G.S.T.

2

-

-

... More
Supply, installation, testing and commissioning of Addressable Loop powered sounder with strobe/flasher complete with mounting base as required conforming to BS5839 standards and duly approved by EN54/UL/VDS required to complete the job in all respect Makes: Siemens / Honeywell/ G.S.T.

2

-

-

... More
Supply Installation, Testing and Commissioning of Glow Type Exit Sign Board photo luminescent of size 300 mm x 250 mm x 1.5 mm rigid sheet signage containing Zink Sulphate as bare chemical class - I material PSPA fixed on 3 mm acrylic sheet on both side showing marking (running man, Arrow and Exit) and hanged with the ceiling with chain and fastener Managed Type including cost of labour and material required to complete the job in all respect. Make Omex/ Savmax/Fyrmax/Firesec

20

-

-

... More
Supply Installation Testing and Commissioning of Addressable Monitor Module for monitoring of a line with EOL resistor/ Potential free contact/ voltage monitoring shall be EN54/UL/VDS approved. (In case of 2 monitoring features in one module (points) each point shall be consider separately for payment). Make: Honeywell Morley / Siemens Cerberus / GST

1

-

-

... More
Supply Installation Testing and Commissioning of Addressable Control Relay Module with flexible network structures with a maximun switching current of 1A @ 30V DC. Shall be EN54/UL/VDS Certification Make: Honeywell Morley / Siemens Cerberus / GST

1

-

-

... More
Supply Installation Testing and Commissioning of UL/EN54/LPCB listed and FM Approved Line Isolator for Isolating the section of circuit in case of short in the addressable Loop wiring Make: Honeywell / Siemens Cerberus / GST

2

-

-

... More
Supply and erection of PVC Insulated and PVC round sheathed multi core annealed bare copper conductor industrial flexible cables for voltage grade 1100 Volts conforming to IS: 694:2010 complete in all respect upto the entire satisfaction of Engineer in charge of the work i 2 core PVC round sheathed copper size 1.5 sq mm Make GRANDLAY/Havells/RR Kabel

900

-

-

... More
Supply Installation Testing and Commissioning of minimum 1000 Mtr. Range Siren provided at the roof of the building with separate power supply, relay etc. with all accessories required to complete the job in all respect up to the entire satisfaction of engineer in charge. Make: National/Kheraj

1

-

-

... More
Supply and erection of On-Line- UPS rating 1 KVA, indicative backup time 60 minutes with isolation transformer suitable for single phase AC input and single phase AC output, floor mounted type complete in all respect upto the entire satisfaction of Engineer in charge of the work. Make Microtek/ Emerson / Eaton/ ELNOVA

1

-

-

... More
Supply of 9U rack for switch Mounting with Fan and power Strip, PDU, Hardware Mounting Kit (Excluded GST) Make: Netrack/Comrack/D-Link/C PLUS.

1

-

-

... More
SITC of 250 Watt Class D type Power/Booster Amplifier. Amplifier should work on Mains Power Supply of Universal type with PFC, 85~265 Volts AC with a frequency of 45Hz to 65Hz. Power Amplifier should have SMPS of 280 Watt RMS with a Frequency range of 20 Hz - 20 kHz ( plus 0/-0.25 dB) 8O load, 3 dB below rated power. SNR of 119 dB and Balanced Line input and speaker output of 100 V through connectors of phoenix type. Amplifier should have a protection of Short circuit protections like - DC protection, under voltage protection, temperature protection, overload protection and should work in Temperature range of -10°c to 50°c @ 90% relative humidity (non condensing) with Natural dissipation through heat sink and temperature-controlled fan for cooling purpose to protect the amplifier from heating. Approved Make Honeywell / AHUJA / SHURE.

1

-

-

... More
`Supply, Installation, Testing and commissioning of Wall Mount/Ceiling Speaker with operation 15 Watts to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. Make Honeywell / AHUJA / SHURE.

8

-

-

... More
Supply Installation Testing and Commissioning of Speaker Cable 2 Core 1.5sqmm. Make: Finolex/ GRANDLAY /HAVELLS.

500

-

-

... More
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-`F` insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 180 lpm at 70 m Head (DSR CODE 3.2)...

1

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.