Translational Health Science And Technology Institute Tender

Providing and fixing Over-Head storage of required size, fixed on the MS angle 50x50x5mm screwed on the wall with fastener, one side openable, cabinet made of 18mm thick BWP board of approved make on top, bottom, sides, partitions, and 12mm thick BWP ply of approved make at shelves (middle of cabinets) as per drawing. 1.0mm thick laminate of approved make on exposed sides of cabinets wherever required and 0.8mm thick laminates shall be fixed on all unexposed inner faces of cabinets including wooden/PVC lipping, suitable locking arrangement all type of screw, fasteners for hanging, hinges/piano hinges, wooden screw, adhesive, polishing /painting of lipping, magnetic catchers, door handles/knobs, fixing charges and all other type of necessary fittings etc. complete as per design drawings and site condition as directed by engineer in-charge Size of Storage: 40"x40”x24"

Modification of existing Equipment table including cutting the MS table with wooden shelf and granite in order to achieve the required sizes and jointing the same with other end including granite chamfering, fixing, wooden shelf repairing, MS structure welding, grinding the joints and painting with synthetic enamel paint all complete as per the direction of Engineer in charge.

Providing, fabrication and fixing in position Equipment Table of below mentioned following size made of 19 mm thick BWP board on top & bottom, supporting frame shall be made of thick 38mmx38mmx3.2 mm heavy duty MS square pipe fabricated as per design with height adjuster. Not less than 18 mm thick polished z-black granite stone of adequate size shall be fixed on top and bottom with suitable adhesives including edge grinding / chamfering & polishing , screws and all other necessary fitting/ fixing arrangement etc. complete as per design, drawing and as directed by the Engineer-In-Charge. Description : Size 18”x 18"x 2'6"