Public Works Department Tender

HSR [24.2.8.5]LT CABLE 8.5. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 25 sqmm

NS Ambala location instalation table of the map of ambala made of corian/ bronze/ mdf/ acrylic/ concrete with AR pods (Min.8 no.s) through which the visitor can interact with the Ambala map. - The AV focusses to explain the strategical location and topographical representation of Ambala and nearby area with special focus on its connectivity to Delhi, North West Frontier Province and Shimla (the summer capital of the British during 1857) and explain the importance of British setting up the cantonment area in Ambala. Since the film is a mix media installation combining kinetic surfaces with projection the visuals will be graphical highlighting the various regions of northern part of India and details of Ambala region and the surface of the screen. The duration of the AV will be 5-7 minutes with VO in 2 languages. The film to include motion graphics, 2D/3D animation, information graphics, images, video content, illustrations, sketches that will be created or procured from archival content. The movement of the kinetic blocks also to be designed in synchronisation with the AV to create the design effect as per the approval of the Museum design consultant.

HSR [24.2.7.1]LT CABLE 7.1. Supply and erection of suitable compression type brass cable glands for underground Cable :- Up to 6 Sq mm cable 2 to 4 Core

HSR [24.2.6.5]LT CABLE 6.5. Supply and erection of copper lugs including crimping etc. entire satisfaction of Engineer-in- Charge of the work. 10 sqmm

NS Barcode scanners with turnstyle at the entry control and check the tickets. Refer image in the presentation. Rate to include the cost of server and maintenance.

NS Carpet Flooring - Providing & Laying approved shade of acid stain resistant Carpet Tiles/flooring of 2-5 mm thickness with waterproof backing , installed in area demarked in detail drawings over vertical/horrizontal surface and as per company specifications. Thecost is inclusive of necessary adhesives, fixtures, profiles etc all complete as per the direction of Engineer in charge. Make :(Armstrong, Euronics, Geggus, alphtahs or eqv) (AOR No.RA-10)

NS Free standing Wooden Partition - 150mm - Providing and fixing 150 mm overall thickness free standing partition up to 4 meter height consisting of 50X50mm/75X75mm/ as per site requirement wooden battens in a grid pattern with 600mm c/c spacing bothways (horizontal and vertical) or at required spacing near opening, with necessary fixing at junctions with screws, nails, adhesives and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc. wherever required. The rate to be inclusive of providing and installing top cover of 12mm to 18 mm ply conforming to BWR grade of Greenply/ Duroply/ Century ply or similar makes on both sides with edge profiles, including the cost of necessary hardware, screws, nails etc all complete as per approved drawings and the direction of engineer in charge. The cost is also to be inclusive of providing surface base with a smooth sand faced cement plaster with 2 base coat of water proof primer on top as per shade required after duly clearing off any unwanted scratches and undulations by sand papering or using a wire brush before actual application , being complete including cost of all material, labour, machinery, T&P, curing, all leads, lifts and sampling, testing and water arrangements complete as per drawings, requirements, specification and as directed by the Museum Consultant. The surface should be smooth enough for vinyl film application.

NS Reception table size - Providing and fixing of 10000mm X 1050 mm X 800mm reception table partially straight and partially curved made in special square pipe sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 of size 50X50mmX2mm MS square pipe frame with 18mm thick commercial plyboard 12mm thk acrylic solid surfaceon top/ microtopping finish as approved by the museum deisgn consultant. Inclusive of 2 no's drawer unit 600mm x 450mm made in 18mm thk Block Board finished (outside) with 2 nos. drawer and 1 nos. file storage space with shutter finished (both inside and outside) with 1mm thick laminate inside with face finished in acrylic solid surface or any other necessary finish as per drawing and as approved by museum consultant. The hardware and fittings to be hettich/haffele/ equivalent. All shelves, drawers, designer handles, lockable drawers with necessary first class hardware and adhesive approved by museum Consultants. The rates are inclusive of artwork/deisgn in etching/laser cutting/cnc in acrylic solid surface/wood/metal/glass as per approved by musuem design consultant. With Print ready designed graphics , illustrations / artwork and Copywriting and editing of bilingual textual content as per conceptual design provided by Museum consultant. Under special conditions, the size of the table may vary and cost considered to be under prorata basis proportionately.

NS Mapping Software - 3D Projection mapping software, Playback control System to manage, schedule and control the media severs. It should have direct control on inputs and media timelines. It should have an option of being controlled by an external unit integrated with the software. to complete the job with all respects. Make- Dataton/Coolux/Pixera/Vioso Equivalent

HSR [23.2.4.1]COPPER WIRING WITH MODULAR SWITCHES IN MS CONDUITS (SURFACE/RECESS) 4.1. Wiring in MS conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required Group A

HSR [23.2.1.1]COPPER WIRING WITH MODULAR SWITCHES IN MS CONDUITS (SURFACE/RECESS) 1.1. Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick MS conduit pipe. Group A

NS Freestanding Graphic panels - Providing and Installation of Information Glass Panels, with text etched / plotter vinyl text on 12 mm thk glass, 2 No.s glass panels to be included in one unit for structural stability , of size 3000mm in width and 1000mm in width, fixed on 12mm thk acrylic solid surface base as per drawing. Content to be designed as per conceptual design given by Museum Design Consultant. Sample Information Panel and its content and design needs to be approved by museum consultant before production. Refer drawing no. Inclusive of Print ready designed graphics , illustrations / artwork and Copywriting and editing of textual content in Hindi, English as per conceptual design provided by Museum consultant.

NS SITC of ceiling recessed adjustable LED light fixture with Contact Frame of 9.9 W in 3000K CRI90 having net lumen out of approx. 1000lm. LED's should be from McAdam Step:2. Fixture should have an option of Medium, Flood and Wide Flood optics to choose from. Adjustable version that rotates internally by 355° and tiLumenPulse by a maximum of 30°. The swivel unit rotates in a set back position in relation to the surface of the ceiling in order to guarantee precise, comfortable light diffusion and reduce direct glare significantly. The swivel unit body is made of die-cast aluminium with a radiant surface that guarantees optimum heat dissipation. Metallised, thermoplastic, high definition reflector - should have options of Narrow beam, Medium (28Deg) or Flood. Structure with die-cast aluminium external contact frame with a single white finish. Steel rotating parts. Safety glass included Quick and easy tool free assembly. Diameter of the fixture should be 104mm including contact frame with height of the fixture 96 mm. Fixture should be compatible with dimming protocol of DALI/Analog/Triac/DMX. Fixture should have an option of White, Black finish and Internal frame should have option of White, Black, Gold, Chrome, Burnished Chrome options as per site requirement. Complies with EN60598-1 and pertinent regulations and should be BIS certified. Life of LED should be 50,000h - L90 - B10 (Ta 25°C) Make: ERCO/ iGuzzini Laser Adjustable / LTS (AOR No.RA-15)

HSR [11.59]Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

HSR [23.2.5.3]COPPER WIRING WITH MODULAR SWITCHES IN MS CONDUITS (SURFACE/RECESS) 5.3. Wiring in MS conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required Group C

NS Metal Carpet Flooring - Providing & Laying approved shade of stain resistant Metal Carpet Tiles/flooring of 4-5 mm thickness with waterproof backing , installed as per detail drawings and as per company specifications with the approval of museum design consultant. Make Euronic / Gerflor/ Jeoflor/ alphtahs/ equivalent. (AOR No.RA-12)

NS Reception chairs - Supply and installation of Feather lite / Similar Make - Liberate Medium Back Desk Arm Chair (Black) or of similar make from Feather lite / Durian / Wipro / Godrej/eqv. Product Dimensions: Length (43.00 cm), Width (48.50 cm), Height (101.50 cm) Primary Material: Mesh, Upholstery Material: Fabric Colour: Black, Style: Mid Back, The chair is built with health orientated ergonomics in mind. Assembly Required: The product requires basic assembly and comes with assembly instructions Warranty: 3 year warranty against manufacturing defect's. Maximum weight handling capacity while seating in a reclined position is between 120 to 150 kg.Moulded polyurethane arms confirming to IS 7078 with steel inserts for long life, one way adjustable - height adjustable. Easy do it yourself assembly with instruction manual. Duly upholstered seat with approved fabric for maximum comfort, mesh fabric used for back upholstery with unique two piece dynaflex for breathability and maximum comfort. With tension control below seat for reclining. Refer Furniture Options Document for further clarification. Model To be approved by museum design consultant.

NS MS Sheet door (single leaf) - Providing and fixing of MS Metal door with single leaf , including with door frame made of wood/W.P.C and door made in block board , fixed in line & level, with 1-4mm thk M.S Metal sheet/laminate/veneer on both sides, duly finished as per the approval of the museum design consultant, fixed with complete necessary hardware ( hardware , conceled hinges, handles, door stopper, locks ). Size of door 900mm X 2400mm/as per design.

HSR [23.22.6.2]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 6.2. Supply and erection double pole/Four pole Residual (RCCB/ELCB) on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. DP RCCB 30ma sensitivity , 40 A

NS Printed Fabric Panelling with cushioning on one side - Providing and fixing of 50-150 mm thick wooden paneling with wooden batten framing at 600mm c/c both ways with top cover of 6-12 mm commercial ply wooden board BWR grade of Greenply/Centaury ply or similar makes on front side with edge profiles, beadings s etc . The wooden panel to be finished on top with stain free custom made fabric skin, the fabric should be resistant to wear and tear, made of polyester/cotton. Fabric to be block printed as per theme given and as approved by museum design consultant. Inclusive of all - fixtures, fittings,hardware, hanging system, electrical, mechanical or any other mechanism required to make it functional.

NS Before after Interactive model Tables- Red Fort, Delhi and other major cities - Many important monuments and places were completely damaged and 90 percent destroyed by the British, some buildings are not even traceable today. After the destruction of these monuments, the British barracks were built across the country at major centres. Interaction points on a table will be provided with physical scale models of different elements of the red fort, as soon as the visitor touches the model, it will disappear on the main projection screen in front and will be replaces by an appearance of a British structure in its place. it will highlight that the physical model in front of the visitors changes into the post 1857 struggle where the place will look completely different as appearing on the projected screen. The projected content will be mixed media Content using 2D animation/Motion Graphics/3D animation, illustration, models with live action shoot wherever required as according to theme and storyline. The visual language has to be derived from one of the Haryana based handicrafts such as block printing etc as approved by the design consultant. Ambient soundscape suitable with the visual content to be developed. There will be minimum of 8 interaction options for the visitor including input from the tablets/touch screens, 8 sliders, push buttons. The visuals will need to be defined accordingly. The projection will include a minimum of 2 major areas i.e. the Red Fort Delhi and Hussainabad in Lucknow.

NS Projector-2 9600 lumens - Supply of 1-chip DLP LASER Phosphor Multimedia Projection system having, 9600 Lumens 20000 hours lamp life, 1920 x 1200 WUXGA Native Resolution, Inbuilt blending and warping with automatic caliberation software, 3000000:1 Contrast Ratio, inputs: HDBaseT,HDMI2.0, DVI-D, Active 3D, Motorised zoom and focus, alongwith 0.65-0.75 lens & projector mountin bracket etc. complete with installation as per the site requirement. Make- Christie,Barco,NEC, Digital Projection

NS Flush Doors- single leaf Size - 750mmX2500mm - Providing and fixing of single leaf flush door made in block board of 35 mm thickness of approved make, including with door frame size 125mm x 75mm made of seasoned wood, fixed in line & level with necessary hardware, hinges, pivots etc all complete to make it functional. The rate is inclusive of applying 1mm thk teak veneer on both sides, duly polished with melamine finish, fixed with adhesives for strength. Size of door 750mm X 2500mm. Providing and fixing of custom made door handles of material Wood/MS of desired size and shape as per the design intent finished in polish/paint/duco/powdercoat etc approved by the museum design consultant. The cost is also inclusive of fixtures, screws, hardware, adhesives etc all complete as per the direction of engineer incharge

NS Interaction points- Joystick game - A scenic projection of various places in india during the freedom struggle of 1857. This projection will showcase the lanes and bylanes of the locations where the visitor with an interactive joystick in the form of a mashaal/torch will travel thorugh the bylanes and at certain points will trigger some projections on the screen itself. the interaction is similar to a video game experience. 3D reconstruction of battle field, people, places, cannons, horses, military, cantonment etc to be developed as per each theme. the 3D construction will be done in game engines like Unity/Unreal. The game interface should allow the user to choose the element with time/point control. Each setup will have minimum 4 interactive points with 3 min of playtime experience, that will reveal detailed walkthrough of the selected place and people, and give the visitor an real life experience as if they are walking in the same city and interacting with mutiple elements in the projection.

HSR [23.1.6.5]COPPER WIRING IN MS CONDUIT (SURFACE/RECESS) 6.5. Wiring main ,sub mains and Circuit wiring in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in MS Conduit etc as required. 1 run of Size 10 Sqmm(1/3.50 mm)

NS Free standing MS Partition - 300mm - Providing and fixing 300 mm overall thickness free standing partition up to 10 meter height consisting of 75X75mm MS sections also the appropriate structural support from ceiling of floor if required ,with top cover of HDWR / HDMR conforming to BWR grade on both side with edge profiles, including providing and fixing of frame work made of appropriate size of MS sections and appropriate space for infilling of Acoustical insulation within the Frame structure, formaldehyde free, fire retardant. Installed with MS wire mesh. Installation complete with all necessary Hardware. Inclusive of all - fixtures, fittings, hardware, hanging system, electrical, mechanical or any other mechanism required to make it functional.The structural stablity to be vet by and the astehtic value to be approved by the design consultatnt

NS MS Metal artefact casing - Providing and fixing Artefact table with MS/wooden framework and w.p.c board and enclosed with Metal sheet/Ply of size as per design and extra clear glass casing printed/lacquered glass base for the artefacts/replicas as per the specifications and drg as approved by the Engineer in charge

NS Granite cobblestone - Providing and fixing at work site, Dark grey/Black color granite/Basalt Cobble Stone with Sandblast Leather Finish of customised size of 100x100x100 mm for Flooring with tolerance not exceeding 10mm & having density of 2800-3000 kg/cum, Including Sand bed 30 mm thick & 1:4 C.M. cement mortar for filling joints ,pointing with cement over joints Curing cleaning complete in all respect and loading, unloading, transportation and including all other taxes and excluding GST complete as directed by Engineer In charge etc.

NS SITC of approx. 26 watt led spot, tiltable, surface mounted, 230 volt, 24 degree Make: Bajaj/Philips, Litolux or equivalent. (AOR No.RA-46)

NS Double Leaf Automatic Sliding Door- Frameless of 2500mm clear opening X 2500mm height - Providing & Fixing of Automatic Sliding Door , Modular Design and customisbale colo with operator dimensions 168mm W x 92mm H x 4.2 Mtr L for max. opening size of 2.0Mtr Wide & Weight capacity for double Leaf Door is 2x80 Kg .Microprocessor Controlled unit will be self learning with adjustable parameters for opening & closing speed, hold open time, reversing when obstacles are encountered. Operator will have 65W DC brush-less Motor, international Make Timing Belt. Operator can be intgrated with Microwave Sensor / Presence Detector Sensor / Foot Switch Sensor / Handwave sensor, Safety Beam (Light Barrier), Programmable Remote Control to Set different modes & Automatic Locking Mechanism, RFID / Biometric / Fingerprint / Access Card Control System & Push Button. Inclusive all necessary fixing hardwares Cost includes the concelaiment of wire from the source to the mechanism of automation. This also includes the Providing and fixing of 12mm thk toughened glass of make Saint Gobin/Modi/Asis/eqv for automated sliding door with framework and hardware as per drawing.Rate to be quoted shall include the cost of all the fixing hardwares screws/nutts/bolts/screws/uv glue/ required for the fixing with Automated sliding door machine with water and air proofing using appropriate materials and hardware.( hardware , hinges, handles, door stopper, locks ). The exact size of the glass to be checked as per the site and the shop drawings should be approved by the design consultant. Additional casing , with top cover duly painted with exterior grade duco of 5 year warranty for the automation machine should be included in the cost to to prevent dust and water getting in. Make - Dorma/Hafle/Hettich/Geze and

NS 1. Immersive point source Speakers Driver Size : 1 x 8" or bigger LF Driver with dual concentric or co-axial HF design Impedance : 8 Ohms Sensitivity : 92 dB or better RMS Power : 120 W or better Maximum SPL Peak - 119dB or better/Maximum SPL (1m) 116 dB Dispersion: 90 degrees conical Frequency Range (-10 dB) : 64 Hz - 20 kHz Enclosure : Enclosure : 15 mm (5/8") plywood, vented and internally braced Powder coated perforated steel grill Multiple Flying suspension point M6 type. Qty.: 4 nos. Make-Renkus Heinz / Tannoy / d&b Audio Technik / Christie/ JBL 2. 3-Way Ceiling speaker - Immersive Speaker Type: Dual Concentric Ceiling Speaker Driver Size : 2 x 5” + 1 x 4.5" LF & 0.8" HF Driver Nominal impedance: 8 Ohm Sensitivity: 90dB RMS Power : 70 W Maximum SPL : RMS - 108dB, Peak - 114dB Dispersion: 81° (H) x 101°(V) Degree @ 1KHz Frequency Range (-10 dB) : 60 Hz-20 kHz Enclosure: Plastic with spraying Backcan & Refl ex loaded UL94 V-0 rated ABS Baffle Steel, with weather resistant coating grill Included Accessories : Grille, paint mask, tool kit, screws, plain washer. Qty.: 4 nos. Make-Tannoy / Monitor Audio / Revel / Origin Acoustics / Martin Loga/ JBL 3. 4-channel Class D 2000Watt Network amplifier with DSP/4-channel Class D 2400Watt Network amplifier with DSP THD 20Hz-20kHz at 1 W 0.05% Dynamic Range 112 dB Channel separation at 1 kHz 70 dB Power Handling : 4 × 500 W @ 2/4 Ohms, 4 × 500 W @ 8 ohms, 4 × 425 W @ 16 ohms - 4 x600W @ 2/4/8 Ohms Max power per channel in case of bridge mode / Power managmenet should be 1600 watts @ 4 ohms and 1100 watts @ 8 ohms 70v/100v Compatible Amplfiier Gain conigurable gain from 22dB to 44 dB Frequency Response (1W into 8 ohm,20 Hz-20kHz) +/- 0.05 dB Peak output Voltage 142V with Max output current upto 30Amps 96KHz Sample Rate DSP Features: classic/linear-phase/FIR speaker processing platform with four throughputs DSP Features: Group control with Raised Cosine MESA EQ asymmetric filters Support Multiple make Speaker presets Comprehensive clocking management system with low latency sample rate conversion Protection Features: Current Average Limiter (CAL), Very High Frequency Protection (VHF), Direct Current Protection (DC), Short Circuit Protection, Current-Clip Limiter, Voltage Clip Limiter, Temperature protection Eight dual-redundant DANTE network audio inputs 4 Analog Inputs, Control port, Two AES3 digital inputs. Qty.: 2 nos. Make-labgruppen / Powersoft / d&b audio technik / Nexo/ Crown-Harman 4. DANTE Virtual soundcard for workstation. Qty.: 1 nos. Make-Audinet 5. 2.5 Sq mm Speaker Cable (as per actual) Qty.: 540 m Make-Belden / Canare / Sommer / Proel 6. 20/22 AWG Microphone/Signal Cable ( as per actual) Qty.: 45m Make-Belden / Canare / Sommer / Proel 7. Control & Signal Shielded Twisted Pair Cable(as per actual) Qty.: 63m Make-Panduit / Commscope / Siemon 8. Various Audio Connectors to complete the system Qty.: 1 lot Make-Neutrik / Switchkraft / Amphenol The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary audio equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate audio solution for the same. All the items required to meet the desired audio output of the installation shall be under the scope of the bidder/execution agency. The necessary approvals to be taken from the museum design consultant and engineer-in- charge before execution of works. *These items have been procured already. Cost of installation, integration , testing and commisioning to be considered for these.

NS Beaten metal - Providing and fixing of false ceiling of stainless steel - made of beaten metal to create an shimmering effect as per the approval of museum design consultant. Inclusive of all - fixtures, fittings, hardware, hanging system, electrical,mechanical or any other mechanism required to make it functional.

NS 1. Elevator Installation - The installation intends to take the museum visitors through a time travel experience introducing the land of Haryana and its history. The following are the various elements of the installation: 2. Part A- Elevator shell and dome - Providing and fixing 150mm overall thickness curved free standing partition and dome ceiling as per deisgn of up to 10 meter height consisting of 50X50mm 75X75mm or as per site requirements of desired thickness in a grid pattern with 600mm c/c spacing bothways (horizontal and vertical) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with ms base plate of desired size and thickness with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc. wherever required. The cost to be inclusive of applying one coat of steel primer of approved quality on the framework. The rate to be also inclusive of providing and installing top cover of 12mm to 18 mm Flexible ply conforming to BWR grade of Greenply/Duroply/Century ply or similar makes on one side having bend radius as little as 100mm , ideal for tight radius work with edge profiles including the cost of necessary hardware, screws etc all complete as per approved drawings and the direction of engineer in charge. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, including jointing and finishing to a flush finish with recommended jointing. Inclusive of all - fixtures, fittings, hardware, hanging system, or any other mechanism required to make it functional. The strength of the shell to be approved by the structural engineer of the contractor. The radius of the dome is approximately 5m. The tentative perimeter of the shell to be 34m and the height is 9m. To attain the desired shell shape materials such as foam, sunboard, pop, GI mesh, glasswool to be included. The hollow space to be filled with glasswool to achieve the desired acoustics levels. The indoor curved surface to have projection on it and the cost is to be inclusive of finishing with screen paint 4k high gain Screen paint of even coats by spraying through compressor after primer coat including scrapping, levelling & preparing the surface. Primer coat (Asian/ Nerolac/ Berger) + (minimum) 3 coats to get evenly spread quality finish of approved make, quality & finish shall be provided as directed by Museum Consultants. Finish with wall putti wherever necessary before paint. Please refer to the design presentation for further details. Area: 481 Sqm. 3. Part B- Elevator platform - Providing, fabricating and installation of the elevator platform. The elevator stepped platform of length 14-15m having 3-4 steps of 1200-1500mm width made of metal/wooden base with structure in M.S. frames of approved size, fully equipped with capacity of lifting upto 75-100 people at a time. Each step to have railings of sleek M.S. sections as per approved by the museum design consultants . The platform to be lifted with the lifting mechanism as per suggested by the elevator experts of the contractor as approved by the museum design consultant. The platform and the mechanism to be consulted by an elevator expert. The elevator expert to approve the strength and working of the elevator. The commissioned execution agency is responsible for all the cerifications required. Inclusive of complete integration and functionality. Qty. 1nos. 4. Part C- False Flooring - upto 900mm - Providing and Fixing of False floor with MS tubular section of 50mmX50mm/75mmX75mm/as per requirement of desired thickness with appropriate spacing and necessary welding at junctions including application of 25mm to 32mm thick BWR grade plywood/board of Greenply/Century ply or eqv fixed to base with 2mm thk MS plate of desired size and base properly welded with all fasteners and necessary hardware's with edge profiles, beadings etc all complete as per approved design. The rate is also inclusive of two coats of MS primer on the frame structure and one to two coats of anti termite oil finish on ply board. Height of False flooring to be considered is 450mm-900mm as per the approval of museum design consultant. Area : 172 sqm. 5. Part D- Sliding Wooden curved Partition - 75mm - Providing and fixing 75 mm overall thickness curved sliding/openable partition up to 4 meter height consisting of 50X50mm/75X75mm/ as per site requirement wooden battens in a grid pattern with 600mm c/c spacing bothways (horizontal and vertical) or at required spacing near opening, with necessary fixing at junctions with screws, nails, adhesives and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, electrical conduits, switch boards etc. wherever required. The rate to be inclusive of providing and installing top cover of 12mm to 18 mm Flexible ply conforming to BWR grade of Greenply/ Duroply/ Century ply or similar makes on both sides having bend radius as little as 100mm, ideal for tight radius work with edge profiles, including the cost of necessary hardware, screws, nails etc all complete as per the direction of engineer in charge. The rate should be inclusive of providing an opening of upto 3000mm wide and 2500mm in height with an automated opening mechanism that should seamless in visual and audio should be synced with the AV content played in the insallation for opening and closing with necessary fixtures, fittings, hardware, hanging system, electrical, mechanical,sliding rails,remort control or any other mechanism required to make it functional all complete as per the direction of engineer in charge. Qty. : 2nos. 6. Carpet Flooring - Carpet:Providing & Laying approved shade of acid stain resistant Carpet Tiles/flooring of 4-5 mm thickness with waterproof backing , installed in area demarked in detail drawings over vertical/horrizontal surface and as per company specifications with the Engineer in charge. Make :(Armstrong, Euronics, Geggus or ) Area : 172 sqm. 7. General note - The installation quality, mechanism and finish should conform to the International standards of museums. The installation is inclusive of all - fixtures, fittings, hardware, hanging system, or any other mechanism required to make it functional. Please refer to the design presentation for further details. The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation. All the items required to meet the intent of the installation shall be under the scope of the bidder/execution agency. Please note that the crafts defined in the installation are subject to be interchanged during the detail design stage. The bidder/execution agency must conduct the structural analysis for the installation before bidding. The installation should be complete in all respect with necessary approvals of museum design consultants and engineer -in-charge.

NS IP based PoE+ enabled Bi-Amplified loudspeaker/2-way loudspeaker with full compatibility with both Dante and open streaming standards such as AES67 and ST2110-30/can be achive through amplifier. Software allows to configure unlimited number zones, loudspeakers and audio channels, and includes device discovery, a versatile room EQ tool set, system organisation and status monitoring. With option of minimum 100RAL colors to be factory manufactured as per site requirement/can be achive through DSP With Key technologies: Active Crossover, Directivity Control Waveguide, Inteliigent Signal Sensing, Minimum Diffraction Enclosure, Optimized Amplifiers, Protection Circuitry, Reflex Port Design, Room Response Compensation/can be achive through DSP Frequency Response(-6dB): 45Hz-20kHz/37 Hz –18 kHz (-10 dB) Peak SPL: 104dB or more/better SPL 118dB Dispersion Angle: H x 120 Degree/Nominal Coverage Angle 110° H x 85° V, rotatable Harmonic Distortion: 0.5%/Optional Power Output: Class D Biamplified Circuitary with 50W each for LF & HF/better power output Driver Size: Minimum 5"" LF & 0.75"" HF Metal Dome Should have minimum 1 x RJ45 for DANTE &PoE+/Optional Analog Input on Euroblock connector Complete with Pan Tilt Wall mount bracket from same OEM. Qty.: 12 nos. Make-Genlec / Renkus Heinz / Devialet/JBL Control & Signal Shielded Twisted Pair Cable(as per actual) Qty.: 1130m Make-Panduit / Commscope / Siemon Various Audio Connectors to complete the system Qty.: 1 lot Make-Neutrik / Switchkraft / Amphenol The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary audio equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate audio solution for the same. All the items required to meet the desired audio output of the installation shall be under the scope of the bidder/execution agency. The necessary approvals to be taken from the museum design consultant and engineer-in- charge before execution of works. *These items have been procured already. Cost of installation, integration , testing and commisioning to be considered for these.

NS 1. Immersive Spatial sound processor 64 x 64 audio DSP and dynamic delay-matrix for upto 64 tracks DANTE audio interface (64x64) Internal single or dual SSD 16 up to 64-track audio playback server and effects 4-band parametric input and 8-band parametric output equalisation Spatial Image Definition object, EQ and system template libraries transferable between Shows Object-based delay-matrix for static and dynamic audio localisation and spatialisation Multi-client PC and Mac software for show programming and control Advanced smooth delay-panning algorithms for ultimate transparency Standalone operation for Cue recall, showcontrol and Zone level control 32 assignable input and output level control Groups MIDI, MTC, GPIO, XML, Date/Time control and triggering RJ45 IP network port, for PC, Mac, AMX, Crestron, hardware remotes. Extra redundant PSU with additional IEC connector Dual mirrored solid-state drives for audio playback redundancy Source submixing at every input, between Analogue (or AES) Input / Playback Track / Network input. Live cross-fade Cue Snapshots between submix sources, I/O mixes, level/delay routings, EQ, playback Routings, EQ, Groups, Labels, System Preset can be exported /imported between shows. Front panel Menu, I/O Meters/Solo/Mute, Group Levels/Solo/Mute, Cue select, Utility, IPExtra redundant PSU with additional IEC connector. Dual mirrored solid-state drives for audio playback redundancy. Qty.: 1 nos. Make-Outboard Timax/ L-Acoustics / d&b Audio technik / SIAP Acoustics 2. Audio DSP with DANTE AEC Mic Input: min 10 No's Line Output: min 6 No's or more USB Audio Interface 24Bit, 48Khz GPIO Contcats: 6 No's or better Built in 64 x 64 channel, dual-redundant DANTE/AES67 audio transport 24 channels of freely assignable Acoustic Echo Cancellation DANTE , Digital Audio Link Port for Future expansion Frequency Response: 20Hz to 20KHz Ethernet Port: Yes RS232 connector for interfacing with 3rd party control systems Crosstalk (inter-channel @ 1 kHZ): 75 dB Common mode rejection: Typically, -60 dB at 1 kHz Input Gain range: 0 to +66 dB Maximum input level: +24 dBu Maximum output level: -31 dBu to +24 dBu THD+N : 0.005%, Dynamic range: 105 dB Qty.: 3 nos. Make-KlarkTeknik / Biamp / Clearone / Symmetrix / AtlasIED/ BSS-Harman 3. PoE based Wall mount touch screen controller It should have 2.3" colour touch screen It should have User programmable encoder and button It should be powered via POE powered device It should Support for multiple pages and controls from processor. Qty.: 2 nos. Make-KlarkTeknik / Biamp / Clearone / Symmetrix/BSS-Harman 4. 24 port POE + network switch 1Gig - Managed. Qty.: 4 nos. Make-Linksys / Netgear / D-Link 5. AV Equipment Rack- 24U. Qty.: 3 nos. Make-Rittal / Valrack / AtlasIED The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary audio equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate audio solution for the same. All the items required to meet the desired audio output of the installation shall be under the scope of the bidder/execution agency. The necessary approvals to be taken from the museum design consultant and engineer-in- charge before execution of works. *These items have been procured already. Cost of installation, integration , testing and commisioning to be considered for these.

NS Ambala War Memorial Website- Concept design, detail design and execution of Ambala War memorial and Museum website with wire framing, user interface design and development of a responsive website with an integrated e-commerce channel for souvenir shop and ticketing. The website to be designed and developed in synchronisation with the design language of the overall museum with minimum 20 pages. The website to be updated from time to time with daily updates. This web portal will also have an admin interface for back end monitoring and handling of the website. Website shall act as a single window for users to access all the information and services offered by Ambala War memorial and Museum, Ambala, Haryana, India. General Requirements 1. The website should be scalable and should be developed with the facility of incorporating Ticket/Booking Management and resource planning. 2. The website should be responsive, web optimized i.e. should have good Slow or PageRank ratings. 3. The website should shall adhere to “GoI – Framework & Guidelines for website design and use of Social media for Government organizations” issued from Government of Haryana 4. The website should be easy to manage and add content by a non-technical person from the admin panel. 5. Website should be SEO enabled and can be easily optimized 6. Website should use an industry standard open source system to create a secure and robust platform with backend CMS. 7. The frontend design of the website should be easy to navigate and should have international feel to its overall design. 8. Trilingual ( English, Hindi and Punjabi) Front End: Suggestive list of content A. Home Page a. Logo b. Secondary Menu – ( Login / My Account / Sitemap/search / Language selection) c. Primary Menu – ( About Us …) d. Rotational Images (banners) - optional e. Welcome content f. Body Content g. News and Events h. Testimonial Briefs i. Footer menu j. Message from PM/CM/CEO k. Social Media Links B. History a. Museum and Memorial Concept (content) b. Museum and Memorial Society (content) c. Museum and Memorial Governing Body (content) d. PWD (content) C. Gallery a. Ongoing construction pictures b. Completed components c. Virtual Tour – 360 degree View d. Key Visits of Famous Personalities D. Visitor Testimonials and Pictures E. FAQ (content) F. Contact Details a. How to reach ( Google Map ) b. About Ambala c. Contact us (form will be there and on successful submission, query will be received on concerned email id) Registered User Pages A. My Account B. Add Your Reviews with Pictures and Suggestion C. Complaint Management Admin Panel functions: A. Menu Management ( Primary , Secondary and footer ) a. User can add, update and delete website content or link for top menu B. Footer Section Management a. User can add, update and delete website content or link for footer b. Admin should be able to create new sections in the footer to add content – Predefined templates to be provided to create such sections. C. Slider Management – Admin should be able to add/remove new images with content to home page slider. D. News / Article Management: a. Client able to add/update/delete news with below fields Title Short description Image Long description State Date. Photo gallery Management: a. With help of this module, client will be able to add/update/delete new album for photo gallery. Fields for the album are stated below: Title Cover Photo of album Cover photo short description b. Client will be able to add/update/delete multiple photos in created album, Select album, Add Photo, Short description for photos F. Video gallery management a. With the help of this module, client will be able to add/update/delete embedded code for YouTube videos b. Fields will be as stated below: Title of the video Embedded code of YouTube Note: Video gallery will be created in YouTube and its embedded code will be added in the portal G. Sections Management – a. Admin should be able to add/remove new sections with Page titles and Page content. b. Content Management System – Website Administrator should be able to create pages through a standard Content management system and can publish content through it. There should be specific layouts/templates for creating the pages. H. User Management a. Admin should be able to manage the registered users and activate / deactivate any user from the website. b. Admin should be able to manage testimonials submitted by the user I. Testimonial Management a. Admin should be able to moderate the testimonials submitted by the users b. Admin should be able to publish/unpublish the selected testimonials (with or without pictures.). Also admin should be able to select which picture to publish. c. Admin should be able to set sequence of published testimonials J. Events Management a. Admin should be able to create new events and put details of event on the website. b. Registered users can show interest to visit the event online. c. Admin should be able to see the list of interested visitors. d. Event brief should be displayed on the homepage with a link to event page. K. Forms Management and short codes a. Admin should be able to create custom forms and assign a short code to that form. Which can be added to any custom page. b. Admin should be able to see the response of each form against the form short code and should be able to download the response in CSV format with custom form heads as columns and rows with data. 11. The branding and visual language of the application to be in synchronisation with the visual language of the museum interiors. Wireframes and sample

NS Aluminium Skirting - Providing and fixing of Aluminium Screw-On Skirting made in anodized aluminium, minimalist skirting, allowing to create an elegant and refined wall-to-floor connection. Equipped with a projecting tab, skirting board guarantees excellent coverage in the perimeter area, meeting the technical requirements of floating floors and concealing minimum perimeter expansion spaces. Height : - 75 mm, Colour - as per desired colour. Inclusive of all - fixtures, fittings, hardware, hanging system, electrical, mechanical or any other mechanism required to make it functional

NS SITC of track mounted Miniaturised adjustable Spotlight projector with adapter of 25W in 3000K/2700K CRI97, Macadam step 2,Die-cast aluminium technical body for LED lamp with 360° rotation around the verticle acis and the possible tilt between +10° and 90° in relation to the horizontal plane. The aiming performance is with mechanical screw locking mechanism with graduated scales and cluth devices. The luminaire is customized with 30mm-40mm metal gobo for round shapes without any halo effect of soft edges. Also special metal flaps are fitted to easily shape and regulate the light beam into squares, rectangles. Accessories should be available that can be adjusted from 2.5mm to 40mm and customised metal gobos. Lifetime 50,000h - L90 - B10 (Ta 25C). The fixture should not exceed the diameter of 100mm. Complies with EN60598-1 and pertinent regulations and should be BIS certified. Make: ERCO/ iGuzzini Palco Framer/ Fagerhult (AOR No.RA-14)

NS acrylic solid surface Skirting - Providing and fixing of12mm thk Acrylic solid surface with ply backing -On Skirting made in Bendable acrylic solid surface, minimalist skirting, allowing to create an elegant and refined wall-to-floor connection. Equipped with a projecting tab, skirting board guarantees excellent coverage in the perimeter area, meeting the technical requirements of floating floors and concealing minimum perimeter expansion spaces. Height : - 50 to 100 mm, Colour - as per desired colour. Inclusive of all - fixtures, fittings, hardware, hanging system, electrical, mechanical or any other mechanism required to make it functional. Make : Dupont/LG/Durlax

NS Bench- corian - Providing and fixing of backless curved/straight bench in 12 mm bendable Acrylic solid surface finish of approved shade and make of size - 450mm width x450mm height with desired length as per the space and as per the approved detail drawings. The bendable acrylic solid surface should be be backed with appropriate MS structure 50X50 mm hollow sections of desired thickness with necessary welding at junctions. The cost is inclusive of proving and fixing 12mm thk flexible/normal ply of approved make with necessary hardware, screws etc all complete as per the direction of engineer in charge. The cost should also be inclusive of all necessary adhesives, grinding, buffing etc for installation of bendable acrylic solid surface on the base. Sample bench to be approved by Museum Design Consultant. The bench should also have a 2D/3D graphic as a museum branding or as per the design language of the space.

NS Stone - Providing and fixing of 20mm Thick stone on counter top and moulding of edges as per design cost inlcuding all the hardware required for fixing of stone.

NS 1. IP based PoE+ enabled Bi-Amplified loudspeaker/2-way loudspeaker with full compatibility with both Dante and open streaming standards such as AES67 and ST2110-30/can be achive through amplifier. Software allows to configure unlimited number zones, loudspeakers and audio channels, and includes device discovery, a versatile room EQ tool set, system organisation and status monitoring. With option of minimum 100RAL colors to be factory manufactured as per site requirement/can be achive through DSP With Key technologies: Active Crossover, Directivity Control Waveguide, Inteliigent Signal Sensing, Minimum Diffraction Enclosure, Optimized Amplifiers, Protection Circuitry, Reflex Port Design, Room Response Compensation/can be achive through DSP Frequency Response(-6dB):67 Hz -20 kHz/70 Hz - 23 kHz (-10 dB) Sensitivity: 87 dB SPL Peak SPL: 100dB or better Dispersion Angle: H x 100 Degree or better Harmonic Distortion: 0.5%/optional Power Output: Class D Biamplified Circuitary with 25W each for LF & HF/better power output Driver Size: Minimum 3"LF & 0.75" HF Metal Dome Should have minimum 1 x RJ45 for DANTE & PoE+/optional Analog Input on Euroblock connector Complete with Pan Tilt Wall mount bracket from same OEM Qty.: 14 nos. Make-Genlec / Devialet / Tannoy / Adam audio/ JBL 2. IP based PoE+ enabled Bi-Amplified loudspeaker/2-way loudspeaker with full compatibility with both Dante and open streaming standards such as AES67 and ST2110-30/can be achive through amplifier. Software allows to configure unlimited number zones, loudspeakers and audio channels, and includes device discovery, a versatile room EQ tool set, system organisation and status monitoring. With option of minimum 100RAL colors to be factory manufactured as per site requirement/can be achive through DSP With Key technologies: Active Crossover, Directivity Control Waveguide, Inteliigent Signal Sensing, Minimum Diffraction Enclosure, Optimized Amplifiers, Protection Circuitry, Reflex Port Design, Room Response Compensation/can be achive through DSP Frequency Response(-6dB): 55Hz-20kHz/70 Hz - 23 kHz (-10 dB) Sensitivity: 87 dB SPL Peak SPL: 100dB or better Dispersion Angle: H x 100 Degree or better Harmonic Distortion: 0.5%/optional Power Output: Class D Biamplified Circuitary with 25W each for LF & HF/better power output Driver Size: Minimum 3"LF & 0.75" HF Metal Dome Should have minimum 1 x RJ45 for DANTE & PoE+/optional Analog Input on Euroblock connector Complete with Pan Tilt Wall mount bracket from same OEM Qty.: 4 nos. Make-Genlec / Renkus Heinz / Devialet/ jBL 3. Supply, Installation,Testing & Commissioning of Two-Way 6.5" Coaxial Ceiling Loudspeaker. Combined 70V/100V and low impedance direct operation, 50 Watts at 8O nominal setting, 30W multi-tap at 70V/100V, 62 Hz – 20 kHz bandwidth with wide 110° coverage, High 91 dB sensitivity for high maximum SPL. Make JBL Model CONTROL16/CT. Qty.: 20 nos. EXISTING* Make-JBL - Control 16C/T 4. 4" 2-way Pendent Mount Speaker 1 x 4” LF Sensitivity: 88dB RMS Power : 25 W In-built transformer Tap : 100V / 70V upto 16W Maximum SPL : RMS - 107dB , Peak - 113dB Dispersion: 100 Degree or better Frequency Range (-10 dB) : 70 Hz-20 kHz. Qty.: 22 nos. Make-Tannoy / AtlasIED / Sonance / OWI / Bose 5. Inwall speakers: Dual 6" In-Wall speaker/ single 6.5" Driver Size : 2 x 6.5” LF & 1 x 1" HF driver/ 1x 6.5" LF, 1 x 1" HF Nominal impedance: 8 Ohm Sensitivity : 92dB/88 dB SPL RMS Power : 80 Watts or better Maximum SPL : RMS - 111dB , Peak - 117dB Frequency Range (-10 dB) : 40 Hz - 20 kHz Enclosure : Baffle panel: moulded UV Resistant ABS Powder coated perforated steel grill- grill should be paintaible to match interior decor Qty.: 14 nos. Make-Tannoy / Focal / Martin Logan / Defintive Technology / Bose/ JBL 6. In-Wall subwoofers: Dual 6" In-Wall subwoofer/ dual 10" wall mount subwoofer Driver Size: 2 x 6.5” driver/2 x 10" driver Nominal impedance: 4 Ohm/ 8O Sensitivity : 94dB RMS Power : 160 W or better Maximum SPL : RMS - 116dB , Peak - 122dB Frequency Range (-10 dB) : 29 Hz - 110 Hz/38 Hz - 500 Hz Enclosure : Baffle panel: moulded UV Resistant ABS Powder coated perforated steel grill- grill should be paintaible to match interior decor. Qty.: 5 nos. Make-Tannoy / Focal / Martin Logan / Defintive Technology / Bose/ JBL 7. Audiophile 24-Bit/96 kHz resolution for professional audio quality Audio Interafce It should have 18x20 USB2.0 Audio/MIDI Interface with ADAT I/O for recording microphones and instruments It should support Streams 18 inputs and 20 outputs of ultra-low latency audio to your computer, supporting Mac* OS X* and Windows XP* or higher It should have 8 state-of-the-art designed Mic Preamplifiers with +48 V phantom power It should have Optical I/Os supporting S/PDIF, ADAT and S/MUX formats up to 96 kHz It Should have Input/Playback Mix control and Stereo/Mono switch for direct monitoring. Qty.: 1 nos. Make-Behringer / Presonus / Steinberg / Focusrite 8. 4x4 USB 2.0 Audio/MIDI Interface- 24-Bit/192 kHz resolution for professional audio quality, Compatible with popular recording software including Avid Pro Tools*, Ableton Live*, Steinberg Cubase*, etc. Streams 4 inputs / 4 outputs plus 1x MIDI I/O. Input/Playback Mix control and Stereo/Mono switch for direct monitoring. Status, Signal and Clip indications for perfect overview. Main Outputs on balanced XLR and 1/4" TRS connectors. Qty.: 7 nos. Make-Behringer / Presonus / Steinberg / Focusrite 9. DANTE Virtual soundcard for workstation. Qty.: 7 nos. Make-Audinet 10. Supply Installation Testing & Commissioning of Dual channel 2X 150Watt Digital Power Amplifier. Power @8om-2x150W,Power@ 4om-2X250W,Frequency Response-20Hz-20KHz(+0,-0.5dB),THD+N- 0.05%,Siew Rate-25V/us,Damping Factor-100,Output Circuitry-Class AB,Signal to Noise Ratio- 85dB,Cross Talk- 60dB,Input Impedance-0.7V,Cooling-Two variable speed fans,Amplifier Protection-Short circuit, themal, over load, chip limiter, DC voltage Make-Harman(JBL). Qty.: 5 nos. Make-model to be confiremd by Customer 11. Dual Channel Class D DANTE 480Watts Power amplifier/Dual Channel Class D DANTE 600Watts Power amplifier Distortion, 1/8 rated power 0.1% Signal To Noise Ratio: 101 dBA Channel separation (Crosstalk) 72 dBA Power Handling : 2 x 240W @ 4/8ohm & 70V/100V/ - 2x300W @ 4/8ohm & 70V/100V Dante 2 channel Rx Input Transmission High-pass filter 80 Hz HPF Frequency Response : 20 Hz to 20 kHz GPI remote volume control using standard RJ-45 connector and Ethernet cable Energy Star Rated/optional Amplifier protection Thermal protection, over current protection, DC protection, high frequency protection Cooling Convection-cooled, fanless Qty.: 4 nos. Make-labgruppen / Powersoft / AtlasIED / LEA Professional / Bose/ Crown- Harman 12. 2-channel Class D 800Watt power amplifier/Dual Channel Class 600Watts Power amplifier THD 20Hz-20kHz at 1 W 0.1% Signal To Noise Ratio 112 dB Channel separation at 1 kHz 70 dB Power Handling : 2 × 400 W @ 2 Ohms / 4Ohms / 8 ohms / 16 ohms - 2x600W @ 4/8ohm 70V / 100 V Compatible Max. output current 16 Arms Frequency Response : 10 Hz - 20 kHz Input impedance 20 kOhm Common Mode Rejection (CMR) 50 dB Output impedance 25 mOhm Enerygy Star Rated/optional Cooling : Single fan, front to rear airflow, temperature controlled speed Comprehensive circuit protection and fault indication. Qty.: 3 nos. Make-labgruppen / Powersoft / AtlasIED / LEA Professional / Bose/Crown- Harman 13. Dante Output expander - 4 channel Qty.: 2 nos. Make-RDL / QSC / Symetrix / Klarkteknik 14. Professional Studio grade Closed-back dynamic over ear headphone Driver Diameter - 40 mm or better Frequency Response: 15 - 20,000 Hz Maximum Input Power: 700 mW at 1 kHz Sensitivity: 96 dB or better Impedance: 47 ohms Cable: 3.0 m (9.8'), straight, left-side exit Magnet: Neodymium Voice Coil: Copper-clad aluminum wire Folding/collapsible: Yes Accessories Included: 6.3 mm (1/4") snap-on adapter Qty.: 15 nos. Make-Audio Technica / Bose / Focal / Beyerdynamic AKG 15. Headphone Aamplfier - 4 channel stero headphoen amplifier with maximum input level of upto +15dBU, 1/4" TRS connector, stereo input and output connectors. Qty.: 9 nos. Make-Behringer / Presonus / Art / Focusrite 16. 4-Zone High Definition Acoustical sound masking System Integrated Analog Noise Generators Selectable Mic/Line Input for Paging or Recorded Messaging 3.5mm Stereo Summed Auxiliary Input for BGM Bluetooth® Streaming for Background Music Enhanced Privacy Mode with Optional Wired or Wireless Sign Preconfigured Sound Masking System Presets VOX Priority Muting for Paging and Background Audio Independent Level Controls per Zone for Mic/Line Aux and Bluetooth® All Inputs have EQ, Hi & Lo Pass Filters and Limit Independent EQ and Level Adjustment in Each Masking Zone Independent System Commissioning Ramping in Each Masking Zone Output Power : 4 x 30-Watts @ 70.7V/100V Output Impedance : 115O Signal to Noise Ratio 90dB Frequency Response : 50Hz - 15kHz Crosstalk : 69dB Power Comsumption : 560mA (Average, All Channels Driven) Display : 2x 24 Segment, Blue Illumination Protection Hi / Low Input Voltage, Thermal, Short, Over Current. Qty.: 2 nos. Make-AtlasIED / Cambridge Audio / Labgruppen / Logison 17. Multi-purpose two way speakers - can be used as In-Ceiling, Wall / Surface Mount or Pendent Mount as per site requrements. Driver size: 2.25" 2-Way Frequency Range: 140Hz - 20kHz Dispersion: 130°, 2kHz Octave Band Sensitivity: 81.6dB (1W/1m) or better Maximum SPL (1m): 103 dB Peak Power Taps 70/100V - upto 8 watts. Can be connected to any 70V / 100V amplifier or the speakers can be connected using Cat5e cable. Each speaker features "in" and "out" Cat5e terminals making it easy to daisy chain speakers to the source unit. complete with Flange, Diffuser and Lens Kits./Input Connectors Removable locking 4-pin connector with screw-down terminals. Qty.: 36 pqairs Make-AtlasIED / Cambridge Audio / Tannoy / Sonanace' JBL 18. 2.5 Sq mm Speaker Cable (as per actual) Qty.: 900m Make-Belden / Canare / Sommer / Proel 19. 20/22 AWG Microphone/Signal Cable ( as per actual) Qty.: 450m Make-Belden / Canare / Sommer / Proel 20. Control & Signal Shielded Twisted Pair Cable(as per actual) Qty.: 824m Make-Panduit / Commscope / Siemon 21. Various Audio Connectors to complete the system. Qty.: 1 lot Make-Neutrik / Switchkraft / Amphenol The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary audio equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate audio solution for the same. All the items required to meet the desired audio output of the installation shall be under the scope of the bidder/execution agency. The necessary approvals to be taken from the museum design consultant and engineer-in- charge before execution of works. *These items have been procured already. Cost of installation, integration , testing and commisioning to be considered for these.

NS Corten Steel Information Signage - Providing and Installation of 8mm thk Corten steel Info - Graphic panel of size 2400mm X 1200mm , fixed with Corten Steel/MS Framework with artwork in Stainless steel and Corten Steel etching on top. Stainless Steel to be fixed on Corten Steel with necessary chemical adhesives. MS Frame structure to include cost of CNC on 75% of the area , Raw Material, waterjet/laser/plasma cutting, Spacer, Chemical Fasteners, Grinding .The structure to be supported with Ms tubular section and base plate and fastened withi fastener and structurally approved, with required foundation work as per approved structure design. Content to be designed on the basis of conceptual design given by museum design consultant. Content and panel design needs to be approved by musuem consultant before production. For the purposed of costconsideration, consider the area for Stainless steel, as 25% the area of corten steel. Inclusive of Print ready designed graphics , illustrations / artwork and Copywriting and editing of textual content in Hindi, English as per conceptual design provided by Musuem consultant.

NS Blackout Light Curtains - Providing and fixing of blackout light curtains of required length. The curtain fabric should be durable enough for use in public space and curtain mechanism should have smooth rail movement, with provision for manual movement of the curtains. Color to be approved by the design consultant.

NS IP based PoE+ enabled Bi-Amplified loudspeaker/2-way loudspeaker with full compatibility with both Dante and open streaming standards such as AES67 and ST2110-30/can be achive through amplifier. Software allows to configure unlimited number zones, loudspeakers and audio channels, and includes device discovery, a versatile room EQ tool set, system organisation and status monitoring. With option of minimum 100RAL colors to be factory manufactured as per site requirement/can be achive through DSP With Key technologies: Active Crossover, Directivity Control Waveguide, Inteliigent Signal Sensing, Minimum Diffraction Enclosure, Optimized Amplifiers, Protection Circuitry, Reflex Port Design, Room Response Compensation/can be achive through DSP Frequency Response(-6dB):67 Hz -20 kHz/70 Hz - 23 kHz (-10 dB) Sensitivity: 87 dB SPL Peak SPL: 100dB or better Dispersion Angle: H x 100 Degree or better Harmonic Distortion: 0.5%/optional Power Output: Class D Biamplified Circuitary with 25W each for LF & HF/better power output Driver Size: Minimum 3"LF & 0.75" HF Metal Dome Should have minimum 1 x RJ45 for DANTE & PoE+/optional Analog Input on Euroblock connector Complete with Pan Tilt Wall mount bracket from same OEM Qty.: 14 nos. Make-Genlec / Devialet / Tannoy / Adam audio/JBL Control & Signal Shielded Twisted Pair Cable(as per actual) Qty.: 1150 m Make-Panduit / Commscope / Siemon The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary audio equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate audio solution for the same. All the items required to meet the desired audio output of the installation shall be under the scope of the bidder/execution agency. The necessary approvals to be taken from the museum design consultant and engineer-in- charge before execution of works. *These items have been procured already. Cost of installation, integration , testing and commisioning to be considered for these.

HSR [23.22.4.7]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.7. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 8 way ( 8 incoming 3phase*8 outgoing)

NS Artifact Display case (2400X1500X1650mm)(LXBXH) - Providing 2400X1500X1650 mm (L x W x H) Artifact Display Unit. Find the details in the attached drawing and the details of international standards mentioned below. Any differnce in size will be taken on prorata basis. (Refer image No. 15 at Page No. 99 for reference only) (Refer image No. 18 at Page 102) a) 150 mm high base of showcase unit of 19mm Ply board finished with 6 mm thick Corian. One side of the base with toughened glass panel (as per design) to be openable with all necessary hardware like channes screws etc complete. b) 2600X900x600 (L x W x H) Pedestal to be made of 19mm Ply board and finished with 8mm thick frosted glass as per drawing. c) 3000x1200mm wide and 1500 mm high 12mm thick toughened clear glass box over Corian base. Glass sides to be fixed with 10-15 mm thick pre factory finished powder coated metal beading on all the edges for support. Three sides to be fix and one side to be openable with the help of corian finished panel and necessary hardwae like sliding channel, screws etc complete. The openable panel to be lockable with allen key lock as per drawing. Locking system should not be visible. Reference Image attached. d) 2450x100x 3mm thick mild steel sliding Signage finished with matt finish Duco paint and print as per design/ Graphic design. e) Artifacts to be placed by MS painted hooks/Industrial tapes etc. - Reference image attached. f) Clear glass should be used with blended edges as per reference video. g) Cost should include Borer / Anti termite treatment for plywood. h) Showcase unit to be made complete as per the drawing and details. i) Showcase unit to be approved by Engineer-in- charge.

NS Fabric /Canvas Print Graphic Panels - Designing, Providing and Installation of Fabric / Canvas Print Info - Graphic panel of size 1200mm x 4500mm, mounted on on museum interior walls fixed on the wooden batten frame of section 100mmX50mm at 600mm c/c both ways and 12mm thick BWR grade plywood of Greenply/Century ply or similar makes on front side The wooden framework will have 1" cushioning on top that will be finished on top Canvas print graphic inclusive of all the necessary hardware's used to fix the Canvas , inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by museum design consultant. The Fabric / Canvas Print panel has to be backlit, with appropriate acrylic backing and LED light fixture with drivers and all necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by museum consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Choose high quality image from reliable source (min. 2500 pixels) for the best results • Check quality in Photoshop at 100% scale (proportionate to actual size desired) • Consider the viewing distance for the graphics • Complete print test (scale to final size, print small crop, apply patterns, view at actual distance, adjust) • Request a Sample Print from vendor if unsure of the expected results • Image quality impacts final image result: Image resolution is pixel data image holds, therefore the higher the resolution, the more detail the image will have. Inclusive of Print ready designed graphics , illustrations / artwork and Copywriting and editing of textual content in Hindi, English, , as per conceptual design provided by Museum consultant.

NS Flush Doors- single leaf Size - 900mmX2500mm - Providing and fixing of single leaf flush door made in block board of 35 mm thickness of approved make, including with door frame size 125mm x 75mm made of seasoned wood, fixed in line & level with necessary hardware, hinges, pivots etc all complete to make it functional. The rate is inclusive of applying 1mm thk teak veneer on both sides, duly polished with melamine finish, fixed with adhesives for strength. Size of door 900mm X 2500mm. Providing and fixing of custom made door handles of material Wood/MS of desired size and shape as per the design intent finished in polish/paint/duco/powdercoat etc approved by the museum design consultant. The cost is also inclusive of fixtures, screws, hardware, adhesives etc all complete as per the direction of engineer incharge

NS SAFETY EQUIPMENT (Electrical & UPS Room only - Providing first-Aid Box as approved by St. John Ambulance Brigade/ Indian Red Cross conforming to IS2217-1963.

HSR [23.2.4.2]COPPER WIRING WITH MODULAR SWITCHES IN MS CONDUITS (SURFACE/RECESS) 4.2. Wiring in MS conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required Group B

NS Sensor projection and interactions - The interactive audio visual in the gallery showcases the aftermath of the country and its attainment of freedom from the British rule over a period of 90 years in 1947. The immersive experience to showcase the history of the country from year 1857-1947 in the gallery. The audio visual will be and immersive projection of the abstract Indian Flag in the entire space running continuously and when the vistor comes close to the projection screen within a 1 meter proximity, a sensor will triggered and change and reveal another content related to the events that contributed to the freedom of the Country. Minimum 10 such historical events will be revelaed in the audio visuals. The AV of 1-2 minutes will be running on loop in the background only to be revelaed with proximity sensor interaction and will be created in full HD resolution along with 2D/3D animation, motion graphics, illustrations as per the design consultant approval, along with required ambient sound. Archival footages for the creation of AV's will be used wherever required and available.

NS S.I.T.C. 1100Volts grade cable as per I S: 7098, pt.1(latest edition) with stranded Aluminium / copper conductor; XLPE insulated, multi-core, bunched, armoured/un-armoured with overall heat resistant type ST-2 PVC insulation / Copper stranded conductor; PVC insulated as per I S: 1554 (latest edition) armoured/un-armoured with overall heat resistant type ST-2 PVC insulation on surface / underground / in Pipes / trenches including the cost of digging, sand cushioning with laying etc and refillinig the same in layers or by supporting them in walls and all other accessories as required. Cable shall have nominal identification plates at booth ends ('supply from' & ;supply to'). The sizes are as follows: - : 3.5C x 300 sq. mm. A2XFY

NS Aluminium tinted Glass Partition - Supply and installation of tinted Glass saint gobain or with custom colored thoughened glass of 12mm thickness in minimal Anodized aluminium glazing profile of section of required size and color in the Museum as per vendor specs .the glass should be factory tinted .the frame should be by a top chanel and bottom chanel.there should be no frame othervise and should be seald perfectly with not leakage and passage of airThe cost should include all the neccesary Hardwares for the fixing of glass panels, aluminium section,etc as approved by designer and complete as per the direction of engineer in charge. (AOR No.RA-20)

HSR [24.2.8.14]LT CABLE 8.14. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work.300 sqmm

HSR [23.22.5.8]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.8. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. MCBs FOUR POLE

NS Metal Flooring - Providing and fixing of Matt rustic finished SS/MS Metal Floor Panels customised to desired colour and texture by the museum design consultant for a raised floor of varying heights. Flooring composition : Perforated panel ,stringer,pedestal and screws. Thickness- as per structural stability and as desired by the museum consultant. Make :(Armstrong, Euronics, Geggus, alphtahs or eqv) (AOR No.RA-09)

NS SITC of track mounted adjustable LED WALL WASHER with 220V and approx 36W in 1800-6500K .Outdoor/Indoor adjustable spotlight in Rectangular/Square design with adapter for installation and to have accessoriy for stand alone installation as surface mounted or ceiling recessed. Product complete with super pure anodized aluminium reflector to guarantee wall washer light distribution for vertical downlight wall illumination. Die-cast aluminium optical assembly. Rotates 360° about the vertical axis and tilts 45° relative to the horizontal plane. Passive heat dissipation. Option of installing an accessory asymmetric screen. Life of LED should be 50,000h - L80 - B10 (Ta 50°C). Overvoltage protection: 2kV Common mode & 1kV. Differential modeFixture should have an option of White, Black finish as per site requirement. Fixture should not be more than 1000mm length 55mmwidth and 119mm in height. IP67 Make: Bajaj/Philips, Anoralux or equivalent. (AOR No.RA-50)

NS Digital marketing team - Role and Responsibility: Marketing Head-The marketing head will be responsible for the strategizing, development, management and implementation of an yearly/monthly digital marketing plan for the Museum. The goal of the marketing plan should be to spread awareness about the museum based on the storyline, visitor attractions and relevance of the subjects. The plan to be creatively developed to create maximum impact in driving visitors to the museum around the year, supported with extensive footfall during the tourist season. The platforms for digital marketing to include Social media (Facebook, Instagram, twitter etc) Digital advertising on google and other relevant platform Articles published in digital media including popular magazines like stir, pool design, design boom, core77 etc Digital media coverage on local, national and international digital news/media channels. He will head the team and will be available for 18 hours a week. The marketing plan should include a schedule of the posts, articles and coverage to be done for at least 3 months in advance and set goals for the output, in terms of traffic on the social media pages, reach (quantitatively), number of interactions on the social media platforms etc. The resource will also share the projected investment for the following month’s advertisement and share the bills on actuals with the concerned authority to get the reimbursements. Marketing head should also be available for on site / meeting at head office atleast once in two week. Necessary approvals to be taken from the concerned authority on the marketing plan and schedule created by the marketing head. Experience -should have an experiance of working in media and marketing related feild for atleast 5 years -Should have the knowledge of all the social media,national/international media platforms. -should have excelent communication skills Qualification- Bachelors in Hotel Management/ Facility Management, Masters in management

NS SITC of Pendant luminaire equipped with a ballast unit with 25W 3000K, CRI 90 having minimum lumen output of 2400lm, Total system wattage not exceeding 29W with Macadam Step 2. Luminaire to be made of die-cast aluminium and thermoplastic material. The pendant system consists of steel cables L=2000 that provide a simple mechanical anchoring system. Having been rotated and tilted, the luminaire can be locked mechanically in position to ensure efficient light aiming (even during maintenance operations). Luminaire for high output LED lamp with monochrome emission in a warm white colour tone (3000K) . Dimmable electronic ballast included are housed in the luminaire. The Beam degree options availbale Equipped with an accessory holding ring designed to contain a flat accessory. Another external component can also be applied, selected from directional flaps and an asymmetric screen. The fixture diameter should not exceed 160mm. All external accessories rotate 360° about the spotlight longitudinal axis. Lifetime 50,000h - L80 - B10 (Ta 25°C). Make: ERCO/ iGuzzini/Fagerhult or eqv. (AOR No.RA-26)

NS Digital marketing team - Role and Responsibility: Photographer and Videographer - He/she should have and experience in capturing the interior spaces and architectural photography and event photography in the form of both photoes and videos.should have a good knowledge of softwares required to edit/enhance/mixing/making good quality pictures or videos. should have an understaning in capturing architectural or interior design details He/She will be available for 30 hours a week. Experience- Should have an experience of atleast 5 years Qualification- Renowned course/workshop/degree in photography/videography

NS CEILING Baffle Ceiling - Aphony Gloss Baffle 25 mm Providing and Fixing ‘APHONY GLOSS BAFFLE’ made of Wood Fibre cement composites covered with Acoustically Transparent Absorptive microfibres on the front side 25 mm thick with an option of colours as per the choice of the Architect/ person in charge of any size. Has excellent noise absorption of 0.74 (for base panel) as per ISO: 354-1985 and ASTM 423-90 a, STC of 47 as per ASTM E90/413 for 25mm, Density 400 Kg/ m3, meets stringent Fire Ratings ASTM D- 876 and BS:476 , weather resistance as per IS 3308, Thermal Insulation as per IS:3346-1980 with relative humidity of 90% RH at 60o Celsius (140o Fahrenheit) for 15 days= No deterioration. Conforms to En 131682001 and are RoHS Complaint. To be installed with 6mm rod/wire. ( AOR No.RA-04 )

NS Annual maintainance cost of electrical items,Installations,Lighting fixtures etc-Year 3

NS Lockers - Providing and Fixing of CKL Locker, stackable storage (up to 4 level), Key Lock Type Cabinet bodies are made of 0.8mm steel with a top edge profile of 10mm. Side panels are of folded steel structure of an overall thickness of 18mm. Drawer/door fronts are in steel with powder coating finish. Width 515mm, Depth 600mm, Height 530mm.As approved by museum Consultants. Refer Furniture Options Document for further clarification.

NS Metal mesh ceiling - Framework: Providing and fixing false ceiling at reuired height from slab level ; maintain appropriate clear height from FFL including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 900 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm diameterx 50mm long with 6mm diameterbolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate channels 45x15x0.9 mm running at the spacing of 900 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to MS intermediate channel with connecting clips made out of 2.64 mm diameterx 230 mm long wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval,fixing of solid/perforated metal sheet ceiling finished in desired color and texture as approved by the museum design consultant. Thickness of the metal sheet to be approriate for bending and folding of the sheet and as approved by the museum design consultant and also including the cost of making openings for light fittings, grills, diffusers, cut-outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge. Inclusive of all - fixtures, fittings, hardware, hanging system, electrical, mechanical or any other mechanism required to make it functional. (AOR No.RA-24)

NS Ambala telegram projection - Silent projection on table highlighting the text of the famous telegram. The visual will appear on the table in a format to showcase that the text is being decoded from the morse code and unveiling in text format on the table. The rate to include required 2D animation, motion graphics, copy for subtitles, appropriate background music (if any).

NS Info Touchscreen Kisok - Display : 13” FHD display with 10-point multi-touch functionality,Diagonal Size 13",Type Edge LED,Resolution 1920*1080 (Full HD),Pixel Pitch(mm) 0.153 x 0.153 Active Display Area(mm) 293.76 (H) x 165.24 (V),Brightness(Typ.) 300 (w/o Glass) nit,Contrast Ratio 600:1,Viewing Angle(H/V) 178/178,Response Time(G-to-G) 8ms(Typ.),Display Colors 16.7 M (real 6bit, dither 8bit),Color Gamut 45% Operation Hour 16/7,Haze 10%,Speaker Type,Built in Speaker(5W),Internal Player : Processor Cortex A72 1.7GHz Quad-Core CPU,Storage (FDM),8GB ,Operating System Tizen 4.0 (VDLinux),,inbuilt Processor : Cortex A72 1.7GHz Quad-Core CPU,with 5 year On site warranty. Qty: 20 Nos. Make-Samsung/LG/Panasonic/Delta/eq Mini PC for Info Kisok - Mini PC, Intel NUC i7/16GB/500GB/Win 10 Pro 64bit/Wireless KM/HDMI cable. Qty: 20nos. Make-Intel/Dell/HP/ASUS Headphone - AutoPlay Available,Silver Conduit,8.4mm Cable Thickness,Available with Teardrop or Knuckle Mounting Plate,Fitted with a 90° Swivel Knuckle,With 3.5mm Headphone Jack,Ear Par Materia: Synthetic leather, circumaural ear pads. Qty: 15 Nos. Make-BlackboxAV, Bose or eq Acessories - Transmitters- Recievers over CAT6 upoto 100 meter, CAT 6 cables,Connectors, Network Rack with acessories,Patch Panel network switch, and other accessories to required to make it fuctional Make-KRAMER/ATLONA/Dlink/Netrack/Comrack Gobo Projector for Floor - Ceiling Light Projection System RGB liquid crystal shutter projection system Projection Method Direct Mounting, Lighting Track (requires Lighting Track option), Floor Standing (requires Floor Stand option) Driving Method Poly-silicon TFT Active Matrix Pixel Number 1,024,000 dots (1280 x 800) x 3 Color Brightness3 Color Light Output: 2,200 lumens White Brightness3 White Light Output: 2,200 lumens Aspect Ratio 16:10 widescreen Native Resolution WXGA (1280 x 800) Light Source Laser Diode Laser Life1 Normal Mode: Up to 20,000 hours Extended Mode: Up to 30,000 hours Throw Ratio Range 1.38 (Zoom: Wide), 2.19 (Zoom: Tele) Size (Projected Distance) 30" – 150" [0.88 – 4.51 m] (Zoom: Wide) Keystone Correction Manual Vertical: ± 45 degrees; Horizontal: ± 40 degrees Dynamic Contrast Ratio Up to 2,500,000:1 Color Reproduction Up to 16.7 million colors Project from Nearly Any Angle Movement: Left/Right: 180 degrees, Up/Down: 180 degrees; Ball-joint Axis Rotation: 360 degrees Track Compatibility Halo: TEK441, 442, 443 Juno: TEK44FT(Black/White) Global Trac: TEK44-1, 44-2, 44-3, Lens Type Optical zoom (Powered)/Focus (Powered) F-number 1.51 – 1.92 Focal Length 18.2 – 28.4 mm Zoom Ratio 1 – 2.21 (Total), (Optical zoom: 1 – 1.58, Digital zoom: 1 – 1.4) with Media Player .The Rates inclusive of all software, hardware, electricals, servers, other , necessary cables, networking and any supportive technology required to make it functional as per concept. The sound output to match premium cinema theatre level experience. Qty: 1 Nos. Make-EPSON/Christie/Barco Touchscreen Application - Application to play the content as per input from RFID. Qty: 7 Nos. Make-Custom Interactive Application - The application software to be developed in enterprise version / commercial version of the gaming engines (Unity3D, Unreal etc.) which supports real time 3d rendering and texture/ light baking. All the API Communication with any kind of server if need to be done in PHP/ MySQL as backend if needed. The developed application should have perpetual license and no subscription at any given point of time. Application/Software development cost to be inclusive of SRS, UI/UX, 2D design, 3D design or anything else needed to run the application. Application flow and UI/UX to be finalised once approved by the museum consultant/ authorities. Bidder will be responsible for submission of application source code technical documents and user manuals. All submitted documents to be digitally signed by the authorised signatory from the bidder. Qty: 1 nos. Make-Custom General note - The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary tech equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. - The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate technical socution for the same. All the items required to meet the techonological intent of the installation shall be under the scope of the bidder/execution agency.

NS SITC of Cross Joint suitable for above track items. (only for recessed version) (AOR No.RA-05)

NS SITC of Spike Light with 6W for options of Very Narrow, Narrow, Medium, Flood, and Wide Flood Optics in Color Temperature option (3000K /6000K). The Housing of the luminairre is die casting darkgrey powder coated aluminium adhesion of ISO Class1/ATM Class 4B The fixture Luminance is 740 lm. With Front Cover: hard chrome plated stainless steel SUS 316L and Optical Lens efficiency 80%. Fixture to have Direct 220V AC Mains supply. IP67 Fixture with Basic and Secondary Color Options. Make: Eurolite/ We-ef/ iGuzzini (AOR No.RA-28)

HSR [23.22.6.6]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 6.6. Supply and erection double pole/Four pole Residual (RCCB/ELCB) on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. FP RCCB 30ma sensitivity , 63 A

HSR [24.1.16]EARTHING AND LIGHTENING ARRESTOR 16. Supply and erection of 25mm dia 1.5 metre long lightning GI. tube rod tapered into a point at the top with 16cm x 16cm x 3mm thick G.I. base plate and necessary nuts and bolts with washers.

HSR [24.2.8.7]LT CABLE 8.7. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 50 sqmm

NS Acrylic copolymer paint - Providing and applying 2 Coats of high quality acrylic copolymer matte latex low VOC emulsion paint of approved shade that gives smooth, flat and washable and durable finishing of approved make. Paint should have good flow levelling property with good colour retention and incan antibacterial property. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC acrylic copolymer based primer sealer that has incan antibacterial property. The work activity should cover all aspects of applying paints from surface preparation, filling to erecting and dismantling of scaffolding, finishing the surface etc as directed by Engineer in charge.

NS False Flooring - 150mm - Providing and Fixing of False floor with MS tubular section of 50mmX50mm/75mmX75mm/as per requirement of desired thickness with appropriate spacing and necessary welding at junctions including application of 25mm to 32mm thick BWR grade plywood/board of Greenply/Century ply or eqv fixed to base with 2mm thk MS plate of desired size and base properly welded with all fasteners and necessary hardware's with edge profiles, beadings etc all complete as per approved design. The rate is also inclusive of two coats of MS primer on the frame structure and one to two coats of anti termite oil finish on ply board. Height of False flooring to be considered is 150mm alongwith provision of cove as per design requirement. (AOR No.RA-05)

NS VR - Development of interactive virtual reality content which will allow the visitors to visit the original surroundings of the time and place where the causes of oppressions by the British were being practiced in the administrative context in virtual reality using VR headsets. 3D reconstruction of a court room where the Indian is being tried and given life sentence for stealing bread and no one is there to present the case of the Indian to protect him. the 3D construction will be done in game engines like Unity/Unreal. The VR interface should allow the user to choose the instrument using gaze control. Each setup will have minimum 5 interactive points with 2 min of playtime experience, that will reveal information in form of text/images/video about the instrument. The voice over/subtitles for the film will be done in 2 languages - Hindi and English. The rate to include all research, 3D modelling, required photo/video shoots, rendering, vfx etc required for the complete experience of the virtual tours. All necessary photoshoot and video shoot to be included in the cost. The cost for any resources such as actors, costume, script, director, cameraman, music director, composer etc. required to be included in the cost. The content should have original music score. The content should be made in appropriate resolution as per screen size. Please refer video no.

NS SITC of Fixed round mini-recessed luminaire with contact frame with approx 2W in 2700K/3000K minimum 120lm CRI90. The LED is set back to minimize direct glare. The recessed body is made of machined aluminium and the inside of the ring of thermoplastic available in a range of painted and metallised finishes. PMMA - spot (14°) or medium (25°) high resolution optic lens. The luminaire to have the availability of either Narrow Beam Optic 14° or to have the Medium Beam Optic of around 24° required as per the consultant approval. Complies with EN60598-1 and pertinent regulations. Lifetime 50,000h - L80 - B10 (Ta 25°C) Fixture should have an option of White, Black finish or combined white black finish. Make: ERCO/ iGuzzini Laser/ Fagerhult (AOR No.RA-18)

HSR [23.22.5.3]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.3. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Double POLE

NS Visitor Self Registration System - RFID Card/Band Dispanser touch screen Kiosk for Visitor Registration. Qty: 5nos. Make-MUTEK/eq with samsung 13" Touchscreen +Intel NUC mini PC with 200000 cards/BAND Server System For Visitor mangement System (Overall Museum & Considering common networking for network setup) - Processor family Intel® i9 10th Gen, Rack Mountable workstation with 5 Year Onsite Warranty RAM- 32GB DDR4 SSD- 1TB, HDD: 2 TB , Nvidia Quadro 4GB, 3DP, Windows 10 Pro 64 Bit With24" Monitor,K/M. Qty: 2nos. Make- Dell/HP/Asus LED Wall - Supply of Video wall with 1.5mm pixel pitch Indoor Model IE015A with minimum resolution(5760 X 1800), pixel density 640000 pixels/m²,Video wall size : 8.64 X 2.7 m , refresh rate 3840Hz,IP20, brightness should be 500 nits or better, contrast ratio 5000:1 or better, Viewing angle 150X150, HDR10, 100% front service, Remote power redundancy, should be complete with OEM ADA complied mounting with certification CE (includes EMC), FCC, IC; CB, UL,TUV, RCM.MAF also required from OEM .The Rates inclusive of all software, hardware, electricals, servers, other , necessary cables, networking and any supportive technology required to make it functional as per design. Qty: 1nos. Make- Christie,Barco,Mitsubishi,Samsung,Delta Media Server for LED wall - Processor family Intel® i9 10th Gen, Rack Mountable workstation with 5 Year Onsite Warranty RAM- 32GB DDR4 SSD- 1TB, HDD: 2 TB , Nvidia Quadro 8GB, 3DP, Windows 10 Pro 64 Bit With24" Monitor,K/M. Qty: 1nos. Make-Dell/HP/ASUS Info Touchscreen Vertical kisok - CapacitiveTouchScreen, Diagonal Size 55",Type Edge LED BLU,Resolution 3840*2160 (4K UHD) Pixel Pitch(mm) 0.315 x 0.315,Active Display Area(mm) 1209.6(H) x 680.4(V),Brightness(Typ.):400 (with Touch glass), 500(without Touch Glass) nit Contrast Ratio 4,000:1 (without glass),Viewing Angle(H/V) 178/178,Response Time(G-to-G) 8ms(Typ.),Display Colors 16.7M,Color Gamut 92% (DCI-P3, CIE 1976 Operation Hour, 24/7 Haze,25% (Without Glass),Special Features H/W: Temperature Sensor,Pivot Display, Clock Battery(168hrs Clock Keeping), Built in Speaker(10W 2ch), Video Wall Daisy Chain(HDCP2.2:4EA,HDCP1.4:7EA), IP5x Rating, Wi-Fi/BT S/W: Auto Source Switching & Recovery, LFD Home UI, Button Lock, Hot key option, Plug&Play (Initial Setting) with 5 year onsite warranty. The Rates inclusive of all hardware, electricals, servers, other , necessary cables, networking and any supportive technology required to make it functional as per design. Qty: 5nos. Make-Samsung/LG/Panasonic/Delta Mini PC for Info Kisok - Mini PC, Intel NUC i7/16GB/500GB/Win 10 Pro 64bit/Wireless KM/HDMI cable. Qty: 3nos. Make-Intel/Dell/HP/ASUS Information Digital Signage Stretched displays - Diagonal Size 37",Type 60Hz E-LED BLU,Resolution 1920*540,Pixel Pitch(mm)0.4686(H) x 0.4686(V),Active Display Area(mm) 899.712(H) x 253.044(V) Brightness(Typ.) 700 nit., Contrast Ratio 4000:1 ,Viewing Angle(H/V) 178:178 ,Response Time(G-to-G) 16ms,Display Colors 8bit - 16.7M,Color Gamut 72%,Operation Hour 24/7,Haze 44%,Input-RGB DVI-I, Display Port 1.2,Video HDMI,HDCP,HDCP 2.2 Audio Stereo mini Jack USB, USB 2.0 x 1,Special Features H/W : USB Plug and Play, Tilting and Portrait Install support, Daisy Chains, Shock and Vibration certificated(IEC 61373) S/W : Magic Clone(to USB), RS232 MDC, , Video Wall, Smart Scheduling, Auto Source Switching, Internal Media Player.The Rates inclusive of all , hardware, electricals, servers, other , necessary cables, networking and any supportive technology required to make it functional as per design. Qty: 5nos. Make-Samsung/LG/Panasonic/ Acessories - Transmitters- Recievers over CAT6 upoto 100 meter, CAT 6 cables,Connectors, Network Rack with acessories,Patch Panel network switch, and other accessories to required to make it fuctional. Make-KRAMER/ATLONA/Dlink/Netrack/Comrack RFID Podiums Application - Application to retrive data from server while tab RFID card/Band on Podium Make-As per approved by museum Consultants General note - The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary tech equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. - The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate technical socution for the same. All the items required to meet the techonological intent of the installation shall be under the scope of the bidder/execution agency.

NS Souvenir Products Part 4 - Designing, prototyping and developing 10 products of cost price Rs.450. The products are to be made with the narratives of 1857 freedom struggle of India museum which would be contemporary and tells a story to its users. The products in this price range could include stationary items, craft related print items like pouches and games like puzzles, tshirts, playing cards etc. All concepts for the products to be presented to the Design Consultant / Department at all stages for approval, The stages include (1) Design concepts (2) Prototyping (3) Final sample. Prototypes of the selected designs te be vetted by the Design Consultant / Department.

NS Terracotta wall panelling (GI frame with Terracotta Finish Mud Plaster) - Providing and fixing 50-150 mm overall thickness partition up to ceiling height/as per design consisting of G.I. frame and top cover of wire mesh gauge on both sides to be finished on top surface with mud plaster giving look and feel of Terracotta Plaster with appropriate paint to give final finish, including providing and fixing of frame work The terracotta plaster finish to have gerua colour in final finish and the plaster should have minimum / light cracks, with rough texture as per the approval of the museum design consultant. Refer image in tender presentation for sample finish required.

NS Projector - Supply of 1-chip DLP LASER Phosphor Multimedia Projection system having, 9600 Lumens 20000 hours lamp life, 1920 x 1200 WUXGA Native Resolution, Inbuilt blending and warping with automatic caliberation software, 3000000:1 Contrast Ratio, inputs: HDBaseT,HDMI2.0, DVI-D, Active 3D, Motorised zoom and focus, alongwith 0.65-0.75 lens & projector mountin bracket etc. complete with installation as per the site requirement. Qty. 10 nos. Make- Christie,Barco,NEC, Digital Projection Media Server - Display media server/Workstation with 4K outputs as required , synced together. It should be capable of capturing content.Intel® i9 10th Gen, Rack Mountable workstation with 5 Year Onsite Warranty RAM- 32GB DDR4,SSD- 1TB(For WINDOWS BOOT), HDD: 2 TB , Nvidia Quadro GFX, 8GB, 3DP, Windows 10 Pro 64 Bi or higher config.It should also have genlock and framelock capability. Should also have Art-net Ethernet in/out. to complete the job with all respects. Qty. 4 nos. Make-Dell/HP/ASUS Mapping Software - 3D Projection mapping software, Playback control System to manage, schedule and control the media severs. It should have direct control on inputs and media timelines. It should have an option of being controlled by an external unit integrated with the software. to complete the job with all respects. Qty. 10 nos. Make- Dataton/Coolux/Pixera/Vioso/Equivalent Acessories - Transmitters- Recievers over CAT6 upoto 100 meter, CAT 6 cables,Connectors, Network Rack with acessories,Patch Panel network switch, and other accessories to required to make it fuctional Make-KRAMER/ATLONA/Dlink/Netrack/Comrack Special Effedts - Make-Customised - Smoke Effect, Ligting Effect,Tornado Effect,Water Spray Make- Automation of the show - Complet show sync with the projection,Music and Special Effects Make-Customised General note - The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary tech equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. - The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate technical socution for the same. All the items required to meet the techonological intent of the installation shall be under the scope of the bidder/execution agency.

NS Printed Glass (for wall panelling) - Providing and Installation of 12mm thk toughened glass, printed with large-format ceramic ink digital print technology . All prints will be done 3-5 mm from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Choose high quality image from reliable source (min. 2500 pixels) for the best results. (Note :- Rate exclusive of partition) • Check quality in Photoshop at 100% scale (proportionate to actual size desired) • Consider the viewing distance for the project • Complete print test (scale to final size, print small crop, apply patterns, view at actual distance, adjust) • Request a Sample Print from vendor if unsure of the expected results • Image quality impacts final image result: Image resolution is pixel data image holds, therefore the higher the resolution, the more detail the image will have. as per approval by Museum Design Consultant. This quantity is inclusive of printed glass and is considered for wall panelling on various surfaces.

NS Montage visual Content of battle scenes - Montage film of 1-2 minutes at 5 locations depicting the images of all the different places where the wars and the battles happened in the regions and major monuments. The rate to include required 2D animation, motion graphics, copy for subtitles, appropriate background music (if any).

NS Well reflection- Augmented reality - Augmented reality based face recognition interactive kiosk. The Audio visual will be created through a database of details of the freedom fighters involved in the planning of the freedom struggle. The visitor will stand looking inside the well to see the reflection of their own face which will a look a like freedom fighter and messages will appear in the well, which will be read out by the visitor and give an echo effect seeming like a passing of the message to plan the freedom struggle against the British. the entire cycle of this experience will be 3-5 minutes depending on the timing of the sensor recognizing the face and displaying the details. at least 5-10 visitors can be a part of this interactive exhibit collectively. the visual output will be a picture along with supporting text and ambient sound, the images of the visitors will be recreated by referring the archival images/paintings/lithographs/ and other documentation etc. the content should be created in full HD resolution along with 2D/3D animation, motion graphics, illustrations as per the design consultant approval.

HSR [23.1.6.3]COPPER WIRING IN MS CONDUIT (SURFACE/RECESS) 6.3. Wiring main ,sub mains and Circuit wiring in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in MS Conduit etc as required. 1 run of Size 4 Sqmm(1/2.24mm)

NS Activity Holograms - Green screen shoot, editing and processing of 10 audio visual clips of total 1-2 minutes duration to showcase the activities of making arms in Haveli of Rao Tula Ram. The visitor will peek in the Haveli model to see the different activites ahppeing and people interacting with each other to plan freedom struggle against the Britih. The audio visual will be developed with green screen shoot, editing and processing to highlight multiple freedom fighter/villager/local leader/ soldier/farmer etc. fighting the battles with the British forces at different locations. The av will capture the tough battles faced by the British forces to fight the revolutionaries. The footage needs to be treated as per the technical requirement for the holographic projection system for best effect. The projection content will be created in full HD resolution along with 2D/3D animation, motion graphics, illustrations as per the design consultant approval, along with required directional sound in two languages wherever required.

NS 3d projection mapping - The AV will be a curated projection mapping show of 6-8 minutes explaining the break out of events in Ambala city at various locations. The projection mapping will be done on scaled models of the buildings/monuments/ landmarks/residence buildings of the war over these buildings with holograms, dmx controlled lighting on the debris /parts of the buildings made. Intended to project dynamic imagery onto the model blocks, transforming the lifeless physical model into a visually appealing and almost real life fire outbreak around and realistic experience. Since the audio visual will be visible on the models, the AV will should be developed to make the most of the visible area to enhance the viewer's experience. The AV will contain mixed media content including 2D animation/Motion Graphics/3D animation and models with Live action shoot wherever required as according to script and storyline. The content should be supported by sound design and Voiceover in 2 languages of duration of 6-8 minutes

NS Ceiling (Baffle) - Providing and fixing of customised baffle ceiling of U shaped anodized/powder coated Aluminium panel of approved colour consisting of basic panel size of 75X40mm with a thickness of 0.5mm to 0.8mm with edges sealed with U shaped baffle cover as per the direction of museum design consultant. The rate is inclusive of installing the baffle at varying heights as per approved drawing by clipping the panels to a baked enamelled Aluminium carrier of colour coated as per approved shade including one leg of the carriers with cut outs to hold the panels in a module fixed to the ceiling with suspended rod of desired length from ceiling. : Ceiling area above U Baffle to be painted in colour before fixing this system. (AOR No.RA-22)

NS Artifact Display case (1400X475X1500mm)(LXBXH) - Providing 1400X475X1500 (WxDxH)mm Artifact Display Unit for wall. Find the details in the attached drawing and the details of international standards mentioned below. Any differnce in size will be taken on prorata basis a) 75 mm high base of showcase unit of 19mm Ply board finished with 6 mm thick Corian. b) 1050x 150X 925 (WxDxH) Pedestal to be made of 19mm Ply board and finished with 8mm thick frosted glass as per drawing. c) 1250x350x1350mm (WxDxH) Toughened glass box shutter with 75x100mm 19mm thick Ply board frame(as per design)to be openable with all necessary hardware like heavy duty Stainless Steel Hydraulic Hinges, screws etc complete. Glass sides to be fixed with 10-15 mm thick pre factory finished powder coated metal beading on all the edges for support. The openable panel to be lockable with allen key lock. Locking system should not be visible. Reference Image attached. d) 950x100x 3mm thick mild steel sliding Signage finished with matt finish Duco paint and print as per design/ Graphic design. e) Artifacts to be placed by MS painted hooks/Industrial tapes etc. - Reference image attached. f) Clear glass should be used with blended edges as per reference video. g) Cost should include Borer / Anti termite treatment for plywood. h) Showcase unit to be made complete as per the drawing and details. i) Showcase unit to be approved by Engineer-in- charge.

NS Arms - Designing, fabricating, installation and finishing scenography installation having 400-500 arrows of actual size of the indian tribal community. the arrows to The stucture to be vetted by structural consultant. The base should be good for projection. For scenography purpose elements to be made in materials like polished hardwood/ fabric/frp/POP/foam/ paint/ microtopping/ clay/ MDF/ Corian/ acrylic/ concrete/ mud/brick/ metal/glass natural material building or other material with highly precise aesthetic properties as per approved by the museum design consultants. The installation to be complete with the framework required to support the models. The installation quality, mechanism and finish should conform to the international standards of museums. The installation is inclusive of all - fixtures, fittings, hardware, hanging system, or any other mechanism required to make it functional. These signature installations to be made by specialized agencies having experience in making sculptures, set design, mannequins, wax models, artwork etc. The commissioned artist/execution agency on board for the installations to take necessary prior approvals from museum design consultant before execution. Please refer to the design presentation for further details. The installation should be complete in all respect with necessary approvals of museum design consultants and engineer -in-charge.

NS Free standing Curved MS Partition - 150mm (ply on both Sides) - Providing and fixing 150 mm overall thickness free standing partition up to 4 meter height consisting of ms hollow section 50X50mm/75X75mm/ as per site requirement of desired thickness in a grid pattern with 600mm c/c spacing bothways (horizontal and vertical) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with ms base plate of desired size and thickness with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc. wherever required. The cost to be inclusive of applying one coat of steel primer of approved quality on the framework. The rate to be also inclusive of providing and installing top cover of 12mm ply conforming to BWR grade of Greenply/ Duroply/ Century ply or similar makes on both sides having bend radius as little as 100mm, ideal for tight radius work with edge profiles, including the cost of necessary hardware, screws etc all complete as per approved drawings and the direction of engineer in charge. The cost is also to be inclusive of providing surface base with a smooth sand faced cement plaster with 2 base coat of water proof primer on top as per shade required after duly clearing off any unwanted scratches and undulations by sand papering or using a wire brush before actual application , being complete including cost of all material, labour, machinery, T&P, curing, all leads, lifts and sampling, testing and water arrangements complete as per drawings, requirements, specification and as directed by the Museum Consultant. The surface should be smooth enough for vinyl film application.

NS Ply Finish (6mm, 12mm, 18mm) - Two or more coats of french polish on new works including a coat of wood filler

NS Bridge platform with for interactive screen - The Ramp to observe the Haryana map and its projection will also have several touch screens with multiple interactions to explain the details of the map. the details will include the name of the area, its district, surrounding regions, number of , dates, people involved i.e. the noble, villagers and British officers etc. the touch interactions will give a glimpse of the relevance of hat region/area/ village etc and its overall context but the content will not be an in-depth details about the freedom struggle. there will be minimum 5 interaction options for the visitor in each touch screen with further interaction options if required integrated with the application and sound. The application will have approximately 10 pages for which wireframing, user interface design , front end and back end coding of the user interface will need to be developed as per the approval of the design consultant, he visuals will need to be defined accordingly. Development of mixed media content (using 2D animation/Motion Graphics/3D animation where ever required as according to script and storyline) of duration 30-60 seconds minutes wherever required. The content should be supported by sound design and voice over wherever required. Programming using HTML/Unity/Java or any other interactive programming language to be considered. Related detail content identification to be done by the vendor.

NS S.I.T.C. 1100Volts grade cable as per I S: 7098, pt.1(latest edition) with stranded Aluminium / copper conductor; XLPE insulated, multi-core, bunched, armoured/un-armoured with overall heat resistant type ST-2 PVC insulation / Copper stranded conductor; PVC insulated as per I S: 1554 (latest edition) armoured/un-armoured with overall heat resistant type ST-2 PVC insulation on surface / underground / in Pipes / trenches including the cost of digging, sand cushioning with laying etc and refillinig the same in layers or by supporting them in walls and all other accessories as required. Cable shall have nominal identification plates at booth ends ('supply from' & ;supply to'). The sizes are as follows: - : 3C x 6 sq. mm. 2XWY

HSR [21.100.5]Making holes for HCL soil / Waste pipe by core cutting up to 200 mm thick slabs and sealing with Drip seal sealant complete in all respect. 5. 175 mm dia pipe

NS Wooden bench - Provision & fixing of wooden benches for visitors as per design with teak finish as per design and complete as per satisfation of Engineer in Charge.

NS SITC of T Joint suitable for above track items. (AOR No.RA-07)

NS SAFETY EQUIPMENT (Electrical & UPS Room only - Supply and fixing shock treatment chart duly mounted on a frame with 3~5mm thick glass as required.

NS Hologram - Audio visual clips of total 3 - 5 minutes duration with multiple Indian people are facing the oppression of the British in the context to the religious oppression . The av will capture the tough battles faced by the British forces to fight the revolutionaries. The footage needs to be treated as per the technical requirement for the holographic projection system for best effect. The voice over/subtitles for the film will be done in 2 languages - Hindi and English. The rate to include all research, 3D modelling, required photo/video shoots, rendering, vfx etc required for the complete experience of the virtual tours. All necessary photoshoot and video shoot to be included in the cost. The cost for any resources such as actors, costume, script, director, cameraman, music director, composer etc. required to be included in the cost. The content should have original music score. The content should be made in appropriate resolution as per screen size.

NS Ambala letter installation with interactive morse code tables - The 2-3 minute projection on the table show exhibits the telegram which proves that the freedom struggle in Ambala happened few hour earlier than any other city. the table will be exhibited in the scenography that sets the context of the telegraph office with multiple interactions on multiple tables. The main table will have the projection of the telegram being decoded from the electrical signals into text as per the original telegram. this projection will be supported by ambient sound which will resemble the sounds of the electrical signals. these signals will also be a play of light visible as a beams of light running through various electric wires in the scenography. The AV should be developed as per the setting of a telegraph office table where statues/mannequins/ models of suitable personnel and officers are physical seated around the table on the physically present chairs and decoding the signals being received at the office. the other interactive tables will be setup along with the morse code/telegraphic signals generating equipment’s supported by an audio visual of various telegrams on the tables/walls/projection screens etc. The visuals will include motion graphics, videos/images from archives, illustrations, 2D/3D animation etc in Full HD/appropriate resolution along with suitable sound design developed as per requirement.

NS Gypsum Partition - Providing & Fixing in position, Partition made from 6-18 mm thick Gypsum from both sides on 50 x 50 mm Sal- wood frame of 600 x 600 c to c, having of 800 gsm synthetic wool 50 mm thick in between, including cost of required Cut-Outs & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour, finishing etc complete as per the direction of engineer in charge. (AOR No.RA-18)

NS Acrylic solid surface bench - Providing and fixing of backless curved/straight bench in 12 mm bendable Acrylic solid surface finish of approved shade and make of size - 1500x450x450mm as per the space as per the approved detail drawings. The bendable acrylic solid surface should be be backed with appropriate MS structure 50X50 mm hollow sections of desired thickness with necessary welding at junctions. The cost is inclusive of proving and fixing 12mm thk flexible/normal ply of approved make with necessary hardware, screws etc all complete as per the direction of engineer in charge. The cost should also be inclusive of all necessary adhesives, grinding, buffing etc for installation of bendable acrylic solid surface on the base. Sample bench to be approved by Museum Design Consultant. The bench should also have a 2D/3D graphic as a museum branding or as per the design language of the space.

NS SITC of track mounted adjustable LED WALL WASHER spot light fixture with approx 34W in 3000K CRI 80 having net lumen out of 2280lm. LED's should be from McAdam Step:2. Indoor adjustable spotlight in Square design with adapter for installation on a three-phase/DALI track or to have accessoriy for standalone installation as surface mounted or ceiling recessed. Product complete with super pure anodized aluminium reflector to guarantee wall washer light distribution for vertical downlight wall illumination. DALI ballast integrated in the body. Die-cast aluminium optical assembly. Rotates 360° about the vertical axis and tilts 90° relative to the horizontal plane. Passive heat dissipation. Option of installing an accessory asymmetric screen. Life of LED should be 50,000h - L80 - B10 (Ta 25°C). Overvoltage protection: 2kV Common mode & 1kV. Differential modeFixture should have an option of White, Black finish as per site requirement. Fixture should not be more than 170mm width and 165 mm in height. Option for installation of accessory like an asymmetric visor for eliminating stray light dispersion on the ceiling. Complies with EN60598-1 and pertinent regulations and should be BIS certified. Make: ERCO/ iGuzzini View Opti Linear Lens WW/ Fagerhult (AOR No.RA-12)

NS Haryana map installation displaying 2D/3D map model of haryana with projection over the map surface and pods on it displaying minature models related to the place/event - The AV of duration 3-4 minutes being played in a loop showcases the spread of the freedom struggle from Ambala to the different regions of Haryana. The projection on the 2D/3D map of Haryana will highlight the different regions of Haryana including the major freedom struggle centres, villages, locations, movement of the revolutionaries, movement of the British armies and the routes taken by all. These projections will also highlight the terrain, rivers and road connectivity of the major centres of Haryana to neighbouring regions such as Delhi, Meerut, North west frontier province, Shimla, Rawalpindi and Lahore etc. These projections will be glimpses of the overall scenario to understand that the freedom struggle was spreading across the state like a wildfire. The content projected should be in synchronisation with the outline and terrain map created with 2D/3D elements and nearby area printed on the custom made vinyl across flooring and walls. The data will be a recreation of war glimpses, movements of army, transportation provisions and people in full HD resolution along with 2D/3D animation, motion graphics, illustrations as per the design consultant approval, along with required ambient sound.

NS Projector - Supply of 1-chip DLP LASER Phosphor Multimedia Projection system having, 9600 Lumens 20000 hours lamp life, 1920 x 1200 WUXGA Native Resolution, Inbuilt blending and warping with automatic caliberation software, 3000000:1 Contrast Ratio, inputs: HDBaseT,HDMI2.0, DVI-D, Active 3D, Motorised zoom and focus, alongwith 0.65-0.75 lens & projector mountin bracket etc. complete with installation as per the site requirement. Qty: 2 Nos. Make- Christie,Barco,NEC, Digital Projection Media Server - Workstation i7/16GB/1TB/ Quadro GFX,Windows 10 pro, Rackmountable With 5 Year Onsite Warranty, Balckmagic Capture Card for DSLR Camera Input. Qty: 1 Nos. Make-Dell/HP/ASUS Mapping Software - 3D Projection mapping software, Playback control System to manage, schedule and control the media severs. It should have direct control on inputs and media timelines. It should have an option of being controlled by an external unit integrated with the software. to complete the job with all respects. Qty: 2 Nos. Make- Dataton/Coolux/Pixera/Vioso/Equivalent Dual Sided Projection Film - 360 DUAL IMAGE PROJECTION FILM,Dual image (mirror image on one side),Off-white film with self-adhesive layer,120 Micron thickness,Two images using only one projector,Supports wide viewing angles,Supports 4K or HD rear projection,This Film will be pasted on the glass wall and projection from on side will be display mirror on toher side of glass.Camera will be fix in center of the glass to capture vistior who seeing in well from upside. Face diffucsed light also required in inner part of Well to focus on visitor face. Qty: 1 Nos. Make-ProDisplay,Glimm or eq DSLR Camera - Wide Angle DLSR Camera, Capture 5 meter radius from 3 meter distance, AC to dc Power Adopter for Continue power supply, Lens as per requirement. Support cables for Capture card to provide inoput to Server PC,3 Year Warranty. Qty: 1 Nos. Make-Canon/Nikon/Sony Acessories - Transmitters- Recievers over CAT6 upto 100 meter, CAT 6 cables,Connectors, Network Rack with acessories,Patch Panel network switch, and other accessories to required to make it fuctional. Qty: 1 Nos. Make-KRAMER/ATLONA/Dlink/Netrack/Comrack Face Filter Application - The application software to be developed in enterprise version / commercial version of the gaming engines (Unity3D, Unreal etc.) which supports real time 3d rendering and texture/ light baking. All the API Communication with any kind of server if need to be done in PHP/ MySQL as backend if needed. The developed application should have perpetual license and no subscription at any given point of time. Application/Software development cost to be inclusive of SRS, UI/UX, 2D design, 3D design or anything else needed to run the application. Application flow and UI/UX to be finalised once approved by the museum consultant/ authorities. Bidder will be responsible for submission of application source code technical documents and user manuals. All submitted documents to be digitally signed by the authorised signatory from the bidder. Qty: 1 Nos. Make-As per approved by museum Consultants General note - The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary tech equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. - The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate technical socution for the same. All the items required to meet the techonological intent of the installation shall be under the scope of the bidder/execution agency.

NS Lift interiors - Providing and fixing of artwork in materials such as lacqured glass, stone, mdf, metal as per design. The base to be of 75 mm thick mounted paneling with minimum 50X50mm/75 x 75 mm wooden batten in a grid pattern at 600 mm c/c both ways (horizontal and vertical) or at required spacing near opening, with necessary fixing at junctions with screws, nails, adhesives etc all complete. The cost to be inclusive of top cover of 12 mm commercial plywood BWR grade of Greenply/Centaury ply or similar makes on front side with edge profiles, beadings s etc. The wooden section to be coated with one to two required coats of anti termite solvent and wooden battens used should be good quality wood. The cost is inclusive of fixing the wooden frame structure on floor/wall/ ceiling with necessary adhesives, hardwares, fastners, fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. all complete as per approved design. The cost includes scrapping and levelling the surface for the application of two or more coats of primer to prepare a smooth base for the application of media as per the satisfaction of engineer in charge.

HSR [24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material.

NS Audio experience inside Homes and villages - Audio files and voiceover in the local language with required sound design converted to suit the directional speaker hardware of duration 3-4 minutes which will be played on loop. The content to be developed as per the mood of the overall gallery depicting the battle cries and the shouting and overtaking of the Indians in different regions of Haryana. The output to be planned as perthe directional speakers planned in the entire gallery with a sense of continuity.

NS SITC of approx 10~15 watt, ww, Decorative Suspended Light of estimated size with height 600mm (approx.), made out of local stone/concrete/terrazo/corian incorporated while moulding is customized shape as per approved design. Assembled with required light fixtures wiring and all the nesseccary hardwares, intergration, electrical &mechanical elements. Make: Customized with design & detailed shop drawing as approved by Consultant. (AOR No.RA-37)

NS SITC of profile projector equipment with 30W high power LED. The luminous flux of the projector light should be 18000-20000LM. The equipment to be fit for indoor/outdoor application with necessary hardwares, fixtures etc all complete. The colour temperature to vary from 1500-6500K with light source life of atleast 30000 hours. voltage to be considered 30-36v. The cost to be inclusive of all cables, drivers, controllers etc required for proper functioning of the luminaire Make: Bajaj/ Anoralux or equivalent. (AOR No.RA-52)

NS International museum documentary - Making of an international documentary on the theme of how indians still carry the burden of slavery in tangible and intangible forms. The master edit of the documentary will be in total of 60-80 minutes supported by 10-12 short edits of 6-8 minutes each which will be showcased in the museum at different locations. Detailed film making process to be followed from conception to final screening. The film need to be made in collaboration with discovery/netflix/epic channel/ equivalent appropriate platform. The cost of coordination for executing the collaboration to be included in the rate of this item. The film will be made with multiple interviews of internationally known and relevant personaities like the Honourable PM of India, Honourable PM of UK, PM/authorities of other common wealth nations, freedom fighters, people who have seen the independance happening, Monarchs of the UK, Honourable memebers of the parliament and cabinet ministers, recognised authors and writers, notable historians, journalists and critique, directors - all relevant national and international personnel who have doen respectable work in relation to the documentation/archicing/representation of the stories related to British Rule in India. Cost of minimum 15 nation wide shoot locations and 5 international shoot locations with necessary equipment and logistic support to be considered as par of the rate of the item. A celebrity anchor from Haryana like Randeep Hudda/equivalent to be considered for anchoring the overall film. Original background score to be developed with renowned national level artists. Appropriate 2d/3d rendering, best camera shoot equipment, lighting accessories, recording equipment, drone shoot equipment and anyother required equipment to be inculded in the rate of the film. The bidder shall qoute for a compiled master documentary plus 10-12 shorts edits of the same documentary. The installation should be complete in all respect with necessary approvals of museum design consultants and engineer -in-charge.

NS WPC Partition -6 mm/12 mm - Providing and fixing factory made single extruded WPC 6mm-12mm thk (Wood Polymer Composite) solid board one side white color board for backing of cup boards and bathroom/kitchen cabinet etc. of required sizes comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 29 gms) having minimum density of 650 kg/cum, screw withdrawal strength of 1800 N(Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In-Charge.

NS Window glazing - Providing and fixing window fitting having clear/extra clear toughened glass of 12-15mm thickness of approved make fixed on the M.S. section/channel of size 25x25mm/50x50mm with silicone adhesives of approved shade and as per the design detail of the museum design consultant.The assembly to be complete with all the necessary hardware such as the M.S. brackets, anchors, channels, nuts, bolts, rubber fittings/fillers etc all complete as per the direction of engineer in charge. The cost is also to be inclusive of providing desired coats of steel primer/duco/as per requirement on the ms section. The glass to have special film on one side of the opening. The fixing to be such that the M.S. section/ channels will be conealed within the panelling.

HSR [23.22.4.2]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.2. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. SPN DB Double Door 8 way ( 2 incoming and 6 outgoing)

NS S.I.T.C. 1100Volts grade cable as per I S: 7098, pt.1(latest edition) with stranded Aluminium / copper conductor; XLPE insulated, multi-core, bunched, armoured/un-armoured with overall heat resistant type ST-2 PVC insulation / Copper stranded conductor; PVC insulated as per I S: 1554 (latest edition) armoured/un-armoured with overall heat resistant type ST-2 PVC insulation on surface / underground / in Pipes / trenches including the cost of digging, sand cushioning with laying etc and refillinig the same in layers or by supporting them in walls and all other accessories as required. Cable shall have nominal identification plates at booth ends ('supply from' & ;supply to'). The sizes are as follows: - : 4C x 4 sq. mm. 2XWY

NS S.I.T.C. 1100Volts grade cable as per I S: 7098, pt.1(latest edition) with stranded Aluminium / copper conductor; XLPE insulated, multi-core, bunched, armoured/un-armoured with overall heat resistant type ST-2 PVC insulation / Copper stranded conductor; PVC insulated as per I S: 1554 (latest edition) armoured/un-armoured with overall heat resistant type ST-2 PVC insulation on surface / underground / in Pipes / trenches including the cost of digging, sand cushioning with laying etc and refillinig the same in layers or by supporting them in walls and all other accessories as required. Cable shall have nominal identification plates at booth ends ('supply from' & ;supply to'). The sizes are as follows: - : 3.5C x 70 sq. mm. A2XFY

NS MS Metal Podiums - Providing and fixing Artefac podiums with MS/wooden framework and w.p.c board of size as per design enclosed with Metal sheet /ply on the sides with printed/lacquered glass/Vinul/corian base for the artefacts/replicas as per the specifications and drg as approved by the Engineer in charge .

NS Pivot Lacquered glass panel - Providing and fixing of 12mm thk toughened glass with highly resistant lacquer to one side of the glass of approved make and shade as per colour in specified in detail drawings and as approved by consultant. The rate is inclusive of fixing properly with all necessary silicone adhesives, fittings, arrangement and making necessary holes wherever required etc. all complete as per direction of Engineer in charge. The rate is inclusive providing MS frame/box section of desired size. The panel to include all the necessary hardware/accessories required for a pivot opening panel. The cost is also to be inclusive of providing a finish surface of powder coating/duco/steel primer of approved shade etc on the ms section. Panel size: 2000x2500mm

NS Queue Manager - Providing of Queue managers of approved made, installing as per Museum Design Consultant.

NS Wall mount paneling with wooden frame work 300 - Providing and fixing of 300 mm thick mounted paneling with minimum 75 x 75 mm wooden batten framing at 600 mm c/c both ways and top cover of 18 mm commercial ply wooden board BWR grade of Greenply/Centaury ply or similar makes on front side with edge profiles, beadings s etc. The wooden section to be coated with anti termite coat and wooden battens used should be good quality wood. The wooden frame should be fixed on floor/wall/ ceiling with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and primer coat on unexposed surface complete. Cost of primer base on base to be considered. Inclusive of all - fixtures, fittings, hardware, hanging system, electrical, mechanical or any other mechanism required to make it functional.

NS VR Headsets - Supply, installation, testing and commissioning ofOculus Quest 2, . The Rates inclusive of all software, hardware, electricals, servers, other , necessary cables, networking and any supportive technology required to make it functional as per concept.Qty.: 1 nos. Make-Oculus Application - The application software to be developed in enterprise version / commercial version of the gaming engines (Unity3D, Unreal etc.) which supports real time 3d rendering and texture/ light baking. All the API Communication with any kind of server if need to be done in PHP/ MySQL as backend if needed. The developed application should have perpetual license and no subscription at any given point of time. Application/Software development cost to be inclusive of SRS, UI/UX, 2D design, 3D design or anything else needed to run the application. Application flow and UI/UX to be finalised once approved by the museum consultant/ authorities. Bidder will be responsible for submission of application source code technical documents and user manuals. All submitted documents to be digitally signed by the authorised signatory from the bidder. Qty.: 1 nos. Make-As per approved by museum Consultants Acessories - Transmitters- Recievers over CAT6 upto 100 meter, CAT 6 cables,Connectors, Network Rack with acessories,Patch Panel network switch, and other accessories to required to make it fuctional Make-Standard General note - The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary tech equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. - The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate technical socution for the same. All the items required to meet the techonological intent of the installation shall be under the scope of the bidder/execution agency.

NS Haryana craft furniture - Designing, providing, and fixing of 3-4 typology of furniture in local haryana crafts made out of wood/ fabric/ jute/ niwar/ cotton strands or equivalent. The furniture to have high quality finish, with premium material, complete with cushioning, springs etc. required for the comfort of the visitors. The furniture to be designed such that the visitor can lay on it to look at the ceiling installation. The cost includes providing and fixing of 75-150 mm overall thickness framework to form a base consisting of ms/wooden section 50X50mm/75X75mm/ as per site requirement of desired thickness in a grid pattern with 600mm c/c spacing bothways (horizontal and vertical) or at required spacing near opening, with necessary fixing at junctions. The cost to be inclusive of applying one coat of steel primer/ anti termite solution of approved quality on the framework. The rate to be also inclusive of providing and installing top cover of 19mm plyboard conforming to BWR grade of Greenply/ Duroply/ Century ply or similar makes with edge profiles, including the cost of necessary hardware, screws etc all complete as per approved drawings and the direction of engineer in charge. The framewok will have cushioning on top of appropriate thickness that will be finished on top with stain free custom made fabric skin, the fabric should be resistant to wear and tear, made of polyester/cotton/jute/khadi. Inclusive of all - fixtures, fittings, hardware, hanging system, or any other mechanism required to make it functional. The installation should be complete in all respect with necessary approvals of museum design consultants and engineer -in-charge. The size of the furniture to be : (1200X2500X450mm)

NS SAFETY EQUIPMENT (Electrical & UPS Room only - Foam fire extinguishers, portable type 9 lit capacity hanged on wall with bracket complete as required.

NS Wall mount paneling with MS frame work 150 - Providing and fixing of 150 mm thick wall mounted paneling with minimum 75 x 75 mm MS sections framing at 600 mm c/c both ways and top cover of 18 mm commercial ply wooden board BWR grade of Greenply/Centaury ply or similar makes on front side with edge profiles, beadings s etc. The wooden section to be coated with anti termite coat and wooden battens used should be good quality wood. The wooden frame should be fixed on floor/wall/ ceiling with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and primer coat on unexposed surface complete. Cost of primer base on base to be considered. Inclusive of all - fixtures, fittings, hardware, hanging system, electrical, mechanical or any other mechanism required to make it functional.

NS 1.Supply installation testing and commissioning of two way wall mount speaker Built-in 70V & 100V transformer 8"+2" Economy range speaker of excellent sound quality Power taps 5W/10W/20W/40W/80W @100V outout Both 100V and 80hm outputs Fashion speaker of black color Make-Harman(JBL). Qty.: 9 nos. EXISITING* Make-JBL - Control28 (model to be confiremd by Customer 2.Supply, Installation,Testing & Commissioning of Two-Way 6.5" Coaxial Ceiling Loudspeaker. Combined 70V/100V and low impedance direct operation, 50 Watts at 8O nominal setting, 30W multi-tap at 70V/100V, 62 Hz – 20 kHz bandwidth with wide 110° coverage, High 91 dB sensitivity for high maximum SPL. Make JBL Model CONTROL16/CT. Qty.: 27 nos. EXISITING* Make-JBL - Control 16C/T 3.Supply, Installation,Testing & Commissioning of Multichannel Digital Network Based Power Amplifier with Power output 8 x 600W @ 4 Ohms / 8 Ohms. Eight-channel Audio amplifier , 8x 600W at 4 and 8 Ohm, 70Vrms and 100Vrms output on all Eight channels THD (at full rated power, 20Hz - 20kHz) =0.35%, Cooling Continuously variable speed forced air, Voltage Gain Max level= 34dB, Audio Digital channel bus compatibility up to 8 channel, bridgeable channels - even in 100Vrms mode, 2 digital audio bus RJ 45 port, 1 Ethernet R 45 port for monitoring and configuration. Should have Limiters, Input/output EQ, Delay, Matrix Mixer, Speaker Line Monitoring, Damping Factor (20 Hz to 100 Hz) : 1000 Complete with standard accessories as required. Make CROWN Model DCi8/600DA. Qty.: 1 nos. EXISITING* Make-Crwon - DCI8/600DA 4.2.5 Sq mm Speaker Cable (as per actual) Make-Belden / Canare / Sommer / Proel The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary audio equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate audio solution for the same. All the items required to meet the desired audio output of the installation shall be under the scope of the bidder/execution agency. The necessary approvals to be taken from the museum design consultant and engineer-in- charge before execution of works. *These items have been procured already. Cost of installation, integration , testing and commisioning to be considered for these.

NS Printing of coffe table book of size 180mm X 180mm of 1000 copies as approved by musuem consultant.the quality material, color etc of the final product should be exactly same as per the sample approved after the desigining phase.

NS Printed Vinyl Flooring - Providing and Fixing of Foam Backing Customized printed Vinyl flooring with anti skid, excellent sound insulation, shock absorbent, ease of maintenance with self levelling compound of Gray colour with thickness of 3 - 3.25 mm , as approved by museum design consultant. Make :(Armstrong, Euronics, Geggus, alphtahs or eqv)

NS Optical Fibre Light Installation Supply and installation of sensor based optical fibre light installation in an area of 20 sqm. With 10,000 points of optical fibre of mixed diameterof size - 1.5,2,3 mm (in variable height), 10,000 crystal glass fixtures for optical fibre tip ends. With base framing and finishing in metal , hdwr wood. 1500pc led Dmx compatible dynamic optical fibre engine ports integrated with Arduino uno, Led matrix software - 14pc motion camera sensors. Pc for integration- PC - i7(Intel),GTX 1070 Graphic Card(AMD/NVIDIA) - 8 GB, 16 GB RAM(Kingston/Corsair/Transcend), Keyboard Mouse - HP/Logitech, Cabinet (Coolermaster/Corsair/Thermaltake) Microsoft Windows 10 pro . HDMI Wires (Venta/Amazon basics). The mechanism needs to be designed such that lights are responsive to presence and movement of visitors. The lights should be responsive to the movement of the visitors. Specialized artist/sculpturist on board for the installations to take necessary prior approvals from museum design consultant before execution. (AOR No.RA-38)

NS Acrylic ceiling - Providing and fixing of Translucents Luminous Infill Ceiling Panels of acrylic sheet - made of solid or transperent acrylic sheet with decorative designs with LED light or panel light as per the approval of museum design consultant. Inclusive of all - fixtures, fittings, hardware, hanging system, electrical,mechanical or any other mechanism required to make it functional.

NS SITC of Surface & recessed mounted Track 1 meter Make: Bajaj/Philips, Litolux or equivalent. (AOR No.RA-40)

NS Souvenir Products Part 8 - Designing, prototyping and developing 3 products of cost price Rs.4500. The products are to be made with the narratives of 1857 freedom struggle of India museum which would be contemporary and tells a story to its users. The products in this price range could include miniature models, figurines, statues etc. All concepts for the products to be presented to the Design Consultant / Department at all stages for approval, The stages include (1) Design concepts (2) Prototyping (3) Final sample. Prototypes of the selected designs te be vetted by the Design Consultant / Department.

NS Planning scenography - Special installation with set design recreating forest scenography through various elements such as trees, mud flooring, dense ceiling, infiltrating light through trees, having natural finishes such as mud plaster, sarkanda/bamboo paneling backdrop, etc. The installation intends to create a secretive, surprising, and engaging mood such that the museum visitor may experience becoming a part of the planning of a revolution explaining the various aspects concerning the planning of the 1857 free struggle. Inclusive of but not limited to the following: Part A- Trees - Providing and installing realistic trees having details like peeled bark, bark texture,war markings etc. in FRP/MDF/metal with atleast 20 openable panels as per design in which the elements delivers secret messages to the visitors. The height of the tree to be 3500mm-4500mm (variable as per design requirements). The tree radius to be varying from 450-900mm. The number of trees approx. 60-70 nos. The finish of the tree high quality duco/pu paint/acrylic paint/ as per approved by the museum design consultant. Provision for openable shutter, concealed hinges, magnetic lockable system with provision for placing touch pad/ tablets or any other artefacts as per design. The rate to be inclusive of base plate required for fixing the tree durably with the floor. Inclusive of all - fixtures, fittings, hardware, hanging system, or any other mechanism required to make it functional. Tree (without openable panels) - 40 Nos. Trees replicas with openable panels with provision of tablet fixing inside the openable panel. -15 Nos. Part B- Sculptures - Designing, fabricating, installation and finishing models/sculpture as per scenography requirements including props in approx. diameter 1800-3000mm and height up to 4m having structural framework in wood/metal with wire mesh or other suitatble material, finished in materials such as FRP/POP/foam/hay/straw/white cement/ synthetic wax/resin/fabric/ paint/ microtopping/clay or other material with highly precise aesthetic properties. The mannequins to have accurate adornments and accesories such as headgear, clothes, suitable farming tools, weapons, etc. and state-of-the-art hyper-realistic features with attention to details such as skin texture, skin tones, hair, physical attributes etc. to be recreated as per design reference. The installation quality, mechanism and finish should conform to the International standards of museums. The installation is inclusive of all - fixtures, fittings, hardware, hanging system, or any other mechanism required to make it functional. These signature installations to be made by specialized agencies having experience in making sculptures, set design, mannequins, wax models, artwork etc. The commissioned artist/execution agency on board for the installations to take necessary prior approvals from museum design consultant before execution. Please refer to the design presentation for further details. Qty. : 5nos. Part C- Documentary seating - Providing and arranging rustic wooden log seating of size 450mm-600mm diameter of natural wood seasoned well to be used as a piece of furniture. Qty. : 25nos. Part D- Backdrop - Providing and fixing of panelling in Sarkanda/ jute/bamboo in the pattern as suggested by the sarkanda/jute craftsmen and that matches the design intent. The sarkanda/jute panelling to be done by the special artists/ expert craftsmen of Haryana and approved by museum design consultant. The panelling finish should be good for projection. The panelling to be fixed with base using nails, adhesives, and all necessary accessories required to make it functional. The rate is exclusive of cost for projection paint wherever required. Area : 128 sqm. General note - The installation quality, mechanism and finish should conform to the International standards of museums. Artwork is to be designed by a special artist familiar with the craft and made by local/indigenous artisans/craftsmen with prior experience in the craft. The artist assigned should take all the necessary approvals from the museum design consultant. The installation is inclusive of all - fixtures, fittings, hardware, hanging system, or any other mechanism required to make it functional. Please refer to the design presentation for further details. The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation. All the items required to meet the intent of the installation shall be under the scope of the bidder/execution agency. Please note that the crafts defined in the installation are subject to be interchanged during the detail design stage. The installation should be complete in all respect with necessary approvals of museum design consultants and engineer -in-charge.

HSR [23.22.6.4]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 6.4. Supply and erection double pole/Four pole Residual (RCCB/ELCB) on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TP RCCB 30ma sensitivity , 25 A

HSR [23.22.6.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 6.1. Supply and erection double pole/Four pole Residual (RCCB/ELCB) on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. DP RCCB 30ma sensitivity , 25 A

NS UI UX for all interactions - The application to include all necessary hardware, software and servers to be included. Programming using HTML/Unity/Java or any other interactive programming language to be considered. The content should be supported by sound design and voiceover in 2 languages - Hindi and English. The Software application / CMS / Online Portal should be based on UNITY GAME ENGINE WITH UNREAL REAL TIME 3D rendering tool. and MSSQL as backend with no additional license cost and unlimited uses. Complete UI/UX, 3D Modeling and Rendering also part of the application. App flow and UI/UX will be finalise after the approval of museum Consultants. Application Software source code needs to be handover in a hardisk. Bidder will be responsible for providing User Training, User Manuals for all types of users (including Administrator role) and Technical Documents. (Softcopy should be digitally signed by project manager of the vendor). User Experience should be easy and impactful. The cost for this will be atleast 0.25% of the overall museum cost.

HSR [13.41]Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

NS Metal ceiling - Providing and fixing of suspended ceiling with metal plates of varying shapes and sizes such as 1000x1000mm, 1500x1500mm, 3000x3000mm, or as per the design proposal, in approved color and texture by the museum design consultant. Thickness of the metal sheet to be approriate to avoid bending and folding of the sheet and as approved by the museum design consultant. The metal sheets to be suspended with the main slab with a ceiling suspension system designed to withhold the weight of the metal sheets ensuring visitor safety and stability of the ceiling.

HSR [23.2.3.1]COPPER WIRING WITH MODULAR SWITCHES IN MS CONDUITS (SURFACE/RECESS) 3.1. Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick MS conduit pipe, without separate control switch , Modular type Switch/sockets wiring Group A

NS E- Board Partitions (With MS Frame) - Providing and Fixing of 50- 150mm overall thickness partition using 12-18mm multipurpose cement bonded wood particle board manufactured as per IS: 14276 with suitable cement bonded board screws on both sides of the fixed frame work for partitions/ wall lining etc. including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in-charge. Cement board to be top coated with concrete render (made up of three main components – lime, sand and cement), to give it a smooth concrete finish. Inclusive of all - fixtures, fittings, hardware, hanging system, electrical, mechanical or any other mechanism required to make it functional.

HSR [24.5.2.4]MISCELLANEOUS ITEMS 2.4. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 90/75 mm outer dia/inner dia

NS Reception Sculptural installation Designing, fabricating, installation and finishing of a sculptural installation highlighting the symbolism of tree as metaphor for the museum. This sculpture is a glimpse of the journey in the overall museum, it should be symbolic to the three major parts of the freedom struggle i.e. the war, the wound, the wish. The installation to be designed by special artists such as Subodh Gupta/ Mukul Goyal/ Vibhor Sogani and such nationally and internationally acclaimed artists. The artist should have expertise in large scale sculptures, landmark public installations of international standards. The artist to be finalised upon approval of the concept design submitted by them and approved by the museum design consultants. The size of the sculptural installation to be approximately 15m x 10m made of S.S./M.S./Zinc/wood/ Mdf/ terracotta/ Corian/ FRP/metal/ fabric/corten steel/ materials of Haryana craft and culture as per approved by the museum design consultant. The sculpture to have structure supports of MS sections/steel bars of size as per the structural requirements ensuring the strength and safety of the installation and the surroundings. This sculptural installation to be partly indoor and partly outdoors. The installation should be made such that it is weatherproof and should withstand the various challenges of an outdoor installation. A part of the tree to be at the museum reception indoor space is an extension of the installation, complementing the overall reception space and not outstanding the space. The installation includes the cost of the gravel, pebbles stones, and other equivalent materials complimenting the installation aesthetics and controlling the pedestrian movement around the installation. Please note that this is tentative description of the installation, the final specifications may vary as per the concept and design proposed by the artists/sculpturist. The installation quality, mechanism and finish should conform to the International standards of museums. The commissioned artist/execution agency on board for the installations to take necessary prior approvals from museum design consultant before execution. Please refer to the design presentation for further details. The installation should be complete in all respect with necessary approvals of museum design consultants and engineer -in-charge. The artist assigned should take all the necessary approvals from the museum design consultant.

HSR [24.2.6.4]LT CABLE 6.4. Supply and erection of copper lugs including crimping etc. entire satisfaction of Engineer-in- Charge of the work. 6 sqmm

NS SITC of End Cap required for above Track items. (AOR No.RA-08)

NS SITC of surface mounted approx. 28w 4ft LED Battens, 6k for kitchen/ stores/ office/ups/elect. room. Make: Bajaj/Philips, Litolux or equivalent. (AOR No.RA-45)

NS Technical Staff-AV, mix media installations, digital equipment and electricals - Role and Responsibility: Asst Manager IT Services- managers are responsible for coordinating, planning, and leading computer-related activities in the museum. They help to determine the IT needs of an organization and are responsible for implementing computer systems to fulfill the museums information systems requirements. Running regular checks on network and data security.The person should have the knowledge and experiance in all the mapping,integration, applications and all AV softwares. Identifying and acting on opportunities to improve and update software and systems. Developing and implementing IT policy and best practice guides for the museum. Managing the Server rooms. Coordinating with the 3 rd party vendor for services etc. Experience -should have an experiance of working in the software operation and management field for at least 5 years. -Should be learned in all the softwares used in the museum related to Mapping,projection,sound and integration. Qualification- Bachelors in technology with the relavent feild from nationally/internationaly renowned institute

NS SITC of approx. 5~10 watt/ mtr; LED strips RGBW Color suitable for Cove Light applications. To have color Temperature of 3000K~6000K; with 50mm LED Cut point and 3 Step Macadam. Securely mounted on aluminium channel with lens / diffuser/ silicon gel etc as per requirment. Complete with DALI driver, mounting bracket / clamp accessories etc as required. 230V, WW. Make : iBL / Led Linear/ iGuzzini (AOR No.RA-24)

NS SITC of approx 10~15 watt, ww, Decorative Suspended/wall mounted Light made of with customised design. Assembled with required light fixtures wiring and all the nesseccary hardwares, intergration, electrical &mechanical elements. Make: Customized with design & detailed shop drawing as approved by Consultant. (AOR No.RA-35)

HSR [24.2.8.13]LT CABLE 8.13. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 240 sqmm

HSR [23.23.10]MISCELLANEOUS 10. Supplying and drawing of 1 no UTP 4 pair CAT 6a LAN Cable in the existing surface/recess MS/PVC conduit as required

NS Jail cell replicas - Designing, fabricating, installation and finishing scenography recreation of jail cell of tentative size 1.5m x 2m with height upto 4m having metal bars/hollow pipe sections of desired thickness on upto 3 sides including the cost of fixing the ms bars on ms plate of desired size and thickness to the floor/ceiling with necessary hardware, fixture, screws, nut bolts etc all complete to make the structure stable as per approved design. The stucture to be vetted by structural consultant. The jail cell to have various architectural elements replicating the cell interiors element, plinths, carpet etc. as per design reference. The base should be good for projection. For scenography purpose elements to be made in materials like polished hardwood/ fabric/frp/POP/foam/ paint/ microtopping/ clay/ MDF/ Corian/ acrylic/ concrete/ mud/brick/ metal/glass natural material building or other material with highly precise aesthetic properties as per approved by the museum design consultants. The installation to be complete with the framework required to support the models. The installation quality, mechanism and finish should conform to the international standards of museums. The installation is inclusive of all - fixtures, fittings, hardware, hanging system, or any other mechanism required to make it functional. These signature installations to be made by specialized agencies having experience in making sculptures, set design, mannequins, wax models, artwork etc. The commissioned artist/execution agency on board for the installations to take necessary prior approvals from museum design consultant before execution. Please refer to the design presentation for further details. The installation should be complete in all respect with necessary approvals of museum design consultants and engineer -in-charge.

NS Audio experience inside Homes and villages - Audio files and voiceover in the local language with required sound design converted to suit the directional speaker hardware of duration 5-7 minutes which will be played on loop. The content to be developed as per the mood of the overall gallery depicting the aftermath of the killings of the loved ones, family, friends, leaders and fellow freedom fighters with the sound like gun shot being fired, sword being struck, bodies being hanged, destruction happening to infrastructure, voices of people running creating a sense of chaos, fear and pain. The output to be planned as per directional speakers planned in the entire gallery with a sense of continuity.

HSR [20.72]Supplying, errection, testing of Exhaust fan (as per IS code 374) having a capacity of 45 cubic metre per minute complete with suitable G.I sheet ducting in structure confirming to latest IS specifications complete in all respect to satisfaction of Engineer-in-charge.

NS SITC of L Shape Connectors suitable for above track items. (AOR No.RA-03)

NS Wooden Fluted louver panelling - Supply and installation of wooden fluted louvers on walls of size as approved by the museum design consultant. The panels to be complete all the hardware/ equipments required for the mounting. The cost to exclude the cost of the base partition/wall. The finish of the panels to be as approved by teh musuem design consultant.

NS Free standing Glass Information Panels - Providing and Installation of Information Glass Panels, with text etched / plotter vinyl text on 12 mm thk toughened glass, 2 No. glass panels to be included in one unit for structural stability, of size 1200mm in width and 2400mm in height , fixed on 12mm thk acrylic solid surface base as per drawing. Sample Information Panel and its content and design needs to be approved by museum consultant before production. Inclusive of Print ready designed graphics , illustrations / artwork and Copywriting and editing of textual content in Hindi, English, , as per conceptual design provided by Museum consultant.

HSR [13.30.1]Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 1. Hot finished welded type tubes

NS TV Panels - Providing and fixing of a wooden T.V. mounting box made of up to 18mm thick plywood with 4-6mm mdf finished in duco paint of approx. size 1700x1000mm/ as per the size of the equipment with provision to fix vision glass as per design detail. Inclusive of the cost of vision glass of thickness 6-12mm. Inclusive of all the necessary fittings, fixtures, required for the installation. The cost is also inclusive of providing & installing 65 inch TV with 4K Resolution, with openable panels. The Rates inclusive of all hardware, electricals, servers, other , necessary cables, networking and any supportive technology required to make it functional as per concept. upto 65inch. Make - Samsung/LG/ /Panasonic

NS Ushers - Role and Responsibility: Appointed at different locations in Museum, to guide the visitors through the museum galleries Ushers help those in attendance at museum and events. Duties include directing people to their assigned galleries, distributing programmes, answering questions and assisting people in finding restrooms and refreshments. Assist people with disabilities. Excellent customer service skills.The cost of direction by an appropriate and experianced director of the ushers should also be included in the same.He will be responsible for training and direction of the ushers. Should be fluent in atleast hindi and english language. Experience -should have an experiance of working or managing sevral cultural events. -should have an experiance of atleast 5 years working in a renowned hospitality chain Qualification Graduates required with good command over verbal Hindi & English. Will be responsible for guiding visitors within the premises Bachelor's in mass communication/journalism/management

HSR [24.5.2.2]MISCELLANEOUS ITEMS 2.2. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 50/40 mm outer dia/ inner dia

NS 1. Jute Installation - This installation is to celebrate the jute and weaving craft of Haryana. The installation have various elements such walls, ceiling and floors made of jute ropes, woven/braided jute as per design. Inclusive of the elements such as: 2. Jute Carpet Flooring - Providing and fixing carpet flooring made of jute hand-woven/braided by the special artist/craftsmen of desired size and thickness in the pattern and shade as per the approval of the design consultant. The carpet to be anti skid, excellent sound insulation,ease to maintain. The rate is inclusive of laying an underlay wherever required and fixing in place with necessary foam backing heavy duty adhesives, doble sided carpet tapes etc all complete as per the direction of engineer in charge. Area : 120 Sqm. 3. Jute Ceiling - Providing and fixing 25x25mm/50x50mm/75x75mm/as per site requirement freestanding M.S. sections of desired thickness tightly wrapped with jute/natural ropes of thickness 5-25mm duly pasted on the sections with adhesives. The ms sections to be fixed horizontally on the ceiling at varied distances parallely and at angles as per the detail drawing and approval of design consultant. The rate is inclusive of coating in one to two coats the mild steel section surface with a base paint/steel primer to avoid rusting. The cost is also inclusive of necessary hardware, clutch wire, fastners etc all complete to install the jute wrapped ms sections in desired pattern to the ceiling/surface as per the satisfaction of engineer incharge. The cost includes coating the jute ropes with two or more coats of paint of desired shades and as per approval. The no. of length of pipe to be used per sqm to be upto 10 lengths of 10 rnft each of assorted length of pipe. The cost is also inclusive of two or more coats of required paint such as duco etc touch up on exposed areas as per approved design. Area : 120 Sqm. 4. Jute wall - Providing and fixing 25x25mm/50x50mm/75x75mm/as per site requirement freestanding M.S. sections of desired thickness tightly wrapped with jute/natural ropes of thickness 5-25mm duly pasted on the sections with adhesives. The ms sections to be fixed from floor to ceiling vertically and at angles on the wall at varied distances. The sections to have provision for T.V.and headphones and excluding the cost of the tv mounting box equipment to be installed as per the detail drawing and approval of design consultant. The rate is inclusive of coating in one to two coats the mild steel section surface with a base paint/steel primer to avoid rusting. The cost is also inclusive of necessary hardware, clutch wire, fastners etc all complete to install the jute wrapped ms sections in desired pattern to the ceiling/surface as per the satisfaction of engineer incharge. The cost includes coating the jute ropes with two or more coats of paint of desired shades and as per approval. The structural stability of the installation to be vetted by the structural consultant of the contractor. The no. of length of pipe to be used per sqm to be upto 10 lengths of 10 rnft each of assorted length of pipe. The cost is also inclusive of two or more coats of required paint such as duco etc touch up on exposed areas as per approved design. Area : 150 Sqm. 5. T.V. Mounting box - Providing and fixing of a wooden T.V. mounting box made of up to 18mm thick plywood with 4-6mm mdf finished in duco paint of approx. size 600x900mm with provision to fix vision glass as per design detail. Inclusive of the cost of vision glass of thickness 6-12mm. Inclusive of all the necessary fittings, fixtures, required for the installation. Qty. 21 6. General note - The installation quality, mechanism and finish should conform to the International standards of museums. Artwork is to be designed by a special artist familiar with the craft and made by local/indigenous artisans/craftsmen with prior experience in the craft. The artist assigned should take all the necessary approvals from the museum design consultant. The installation is inclusive of all - fixtures, fittings, hardware, hanging system, or any other mechanism required to make it functional. Please refer to the design presentation for further details. 7. The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation. All the items required to meet the intent of the installation shall be under the scope of the bidder/execution agency. Please note that the crafts defined in the installation are subject to be interchanged during the detail design stage. The installation should be complete in all respect with necessary approvals of museum design consultants and engineer -in-charge.

NS SITC of approx.20~ 24 Watt Surface mounted type 4 feet Batten LED fixture made up of extruded polycarbonate housing, fixture should have minimum net efficacy at System level (Not Chip Level)=100lumens/watt, nominal system lumen of 2000 lumens, Life of fixture 50000hrs @ L70 Lumen maintenance, CCT 4000 - 6000K, CRI=80, PF0.95, and suitable for 230V AC, 50Hz. supply. Minimum Internal Surge Protection=2.5KV. LED driver shall be BIS registered & luminaire manufacture shall provide LM79report from NABL accredited lab & LM80 report issued by LED manufacturer. Make: Wipro / Signify / Regent (AOR No.RA-33)

NS Inwall speakers: Dual 6" In-Wall speaker/ single 6.5" Driver Size : 2 x 6.5” LF & 1 x 1" HF driver/ 1x 6.5" LF, 1 x 1" HF Nominal impedance: 8 Ohm Sensitivity : 92dB/88 dB SPL RMS Power : 80 Watts or better Maximum SPL : RMS - 111dB , Peak - 117dB Frequency Range (-10 dB) : 40 Hz - 20 kHz Enclosure : Baffle panel: moulded UV Resistant ABS Powder coated perforated steel grill- grill should be paintaible to match interior decor Qty.: 9 nos. Make-Tannoy / Focal / Martin Logan / Defintive Technology / Bose/JBL In-Wall subwoofers: Dual 6" In-Wall subwoofer/ dual 10" wall mount subwoofer Driver Size: 2 x 6.5” driver/2 x 10" driver Nominal impedance: 4 Ohm/ 8O Sensitivity : 94dB RMS Power : 160 W or better Maximum SPL : RMS - 116dB , Peak - 122dB Frequency Range (-10 dB) : 29 Hz - 110 Hz/38 Hz - 500 Hz Enclosure : Baffle panel: moulded UV Resistant ABS Powder coated perforated steel grill- grill should be paintaible to match interior decor Qty.: 3 nos. Make-Tannoy / Focal / Martin Logan / Defintive Technology / Bose/JBL DANTE Virtual soundcard for workstation. Qty.: 1 nos. Make-Audinet Dual Channel Class D DANTE 480Watts Power amplifier/Dual Channel Class D DANTE 600Watts Power amplifier Distortion, 1/8 rated power 0.1% Signal To Noise Ratio: 101 dBA Channel separation (Crosstalk) 72 dBA Power Handling : 2 x 240W @ 4/8ohm & 70V/100V/ - 2x300W @ 4/8ohm & 70V/100V Dante 2 channel Rx Input Transmission High-pass filter 80 Hz HPF Frequency Response : 20 Hz to 20 kHz GPI remote volume control using standard RJ-45 connector and Ethernet cable Energy Star Rated/optional Amplifier protection Thermal protection, over current protection, DC protection, high frequency protection Cooling Convection-cooled, fanless. Qty.: 4 nos. Make-labgruppen / Powersoft / AtlasIED / LEA Professional / Bose/Crown-Harman Supply, Installation,Testing & Commissioning of Eight Channel Power Amplifier with 8 X 300W power output. Should have Frequency Response ( 8 Ohms, 20 Hz - 20 kHz):+/- 0.25 dB, Signal To Noise Ratio: 108 dB, Voltage Gain:34 dB, Damping Factor (20 Hz to 100 Hz):1000 Complete with standard accessories as required. Make CROWN Model DCi8/300. Qty.: 1 nos. Make-Crown DCI8/300 Dante Output expander - 4 channel Qty.: 1 nos. Make-RDL / QSC / Symetrix / Klarkteknik 2.5 Sq mm Speaker Cable (as per actual) Qty.: 800 m Make-Belden / Canare / Sommer / Proel Control & Signal Shielded Twisted Pair Cable(as per actual) Qty.: 63 m Make-Panduit / Commscope / Siemon Various Audio Connectors to complete the system Qty.: 1 lot Make-Neutrik / Switchkraft / Amphenol The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary audio equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate audio solution for the same. All the items required to meet the desired audio output of the installation shall be under the scope of the bidder/execution agency. The necessary approvals to be taken from the museum design consultant and engineer-in- charge before execution of works. *These items have been procured already. Cost of installation, integration , testing and commisioning to be considered for these.

NS Bamboo/ Sarkanda panelling - Providing and fixing of panelling in Sarkanda/ jute/bamboo/ wheat stalk with artwork in the pattern as suggested by the craftsmen and approved by the museum design consultants. The sarkanda/jute panelling to be done by the special artists/ expert craftsmen of Haryana under supervision of the museum design consultants.The panelling to be fixed with base using nails, adhesives, and all necessary accessories required to make it functional.

NS Android Tablets - WiFi Android Tablet (Android 12, Qualcomm Snapdragon, 27.94cm (11 Inches), 8GB RAM, 128GB ROM, with 5 year warranty. Make-Samsung/Lenovo Or Eq

NS Custom Made Shelf - Double side - Providing and fixing of 750x3000x2400 mm Pre Fabricated Book Shelf to be provided in structural niches, as per exact site dimension in 50mm x 50mm x 2mm box MS/ Aluminium pipe section frame and shelf top finished in MS/ALuminum of 2mm thkness and finished white Duco paint. The book shelf will be mounted from ceiling, inclusive of all necessary hardware, welding, grinding, colour etc. Sample to be approved by Museum Design Consultant, as per detail drawing.

NS Server Area Access Door Panels - Providing and fixing of double leaf door. Size of door upto 750mm X 2400mm. 55mm to 72mm thick sandwich type composite sound reducing flush door shutters. The combined assembly set of door frame and door shutters to be as per following details: (a) Door frame shall be of teak / hard wood of size – 110 mm X 100 mm, including making necessary grooves in the frame for fixing of hollow bulb type EDPM gaskets on rebates to block noise leakage from gap in between door frame and shutter. (b) The frame of shutter shall be made from 40 mm thick teak / hard wood stiles and top & bottom rails of size 94 mm and core made of lock rail 100 mm wide and 40 mm thick and three additional strips 50 mm wide and 25 mm thick (minimum) (c) Face panels shall be of 12 mm thick Marine ply boards of approved make conforming to relevant IS codes / International Standards on both sides of the core of the shutter with required primer at the unexposed surface . One side of ply board shall be fixed to the core of the shutter along with a 5 mm thick Neoprene rubber sheet on its inner face. (e) laminate finish as approved on top of 12 mm thick marine plyboard on both face of shutter. Make-merino and (f) Hardware- The door assembly shall be fixed to the door frame with heavy duty stainless steel hardware i.e. Door Lock, SS Bal bearing Hinges , SS door handle ‘D’ type back to back, SS Tower bolt.

NS SITC of Fixed Ring Ceiling Recessed luminaire with 18 optical elements for LED lamps - with approx 36W in 3000/4000K CRI90 minimum. The optic system guarantees a high level of visual comfort and no glare. The body includes a radiant surface made of die-cast aluminium. Version includes a perimeter surface frame. High definition reflectors made of thermoplastic material vacuum-metallised with aluminium vapours, integrated in a set-back position in the antiglare screen. Supplied with a power supply unit connected to the luminaire. The fixture should not have dia more than 180mm and depth more than 45 mm. Luminaire should accept all Dimming protocols. The Ring Luminaire should have the availabiility to incorporate in addition to itself profiler projector or adjustable fixture or wall washing fixture or smoke detector adapter, security camera adapter or simple blank cover. UGR10 .Complies with EN60598-1 and pertinent regulations. Lifetime 50,000h - L90 - B10 (Ta 25°C). Make: ERCO/ iGuzzini Blade R/ Fagerhult (AOR No.RA-19)

NS Peep Hole - Montage film of 30- 60 seconds depicting the images of all the different oppressions done by the British in various villages and area e.g. the doctrine of lapse, the annexation of different regions, battle of pallasey etc. the peep hols will showcase the documents, images, paintings and lithographs etc to highlight these oppressions in different regions of India. The rate to include required 2D animation, motion graphics, copy for subtitles, appropriate background music (if any).

NS Flush Doors- double leaf - Providing and fixing of double leaf flush door made in block board of 35 mm thickness of approved make, including with door frame size 125mm x 75mm made of seasoned wood, fixed in line & level with necessary hardware, hinges, pivots etc all complete to make it functional. The rate is inclusive of applying 1mm thk teak veneer on both sides, duly polished with melamine finish, fixed with adhesives for strength. Size of door 1500mm X 2500mm. Providing and fixing of custom made door handles of material Wood/MS of desired size and shape as per the design intent finished in polish/paint/duco/powdercoat etc approved by the museum design consultant. The cost is also inclusive of fixtures, screws, hardware, adhesives etc all complete as per the direction of engineer incharge. (AOR No.RA-28)

NS 1.Pedisterion Sound System SITC of Outdoor / IN-Ground Speaker complying to following:-Weather-proof 5-position tap switch for 25/70.7/100 Volt, Frequency Response of 62 Hz – 22 kHz, 32 / 16 / 8 Watt, UV-, scratch- and weather-resistant, Suitable for high quality Music, corrosion- and theft-resistant mounting hardware, IP 55 rated, tested in accordance to IEC60268 - Part 5 for high quality intelligibility complete with necessary mounting hardware & accesories, Applicable for Indoor and outdoor usescomplete with necessary mounting hardware & accesories.Make-Harman(JBL). Qty.: 58 nos. EXISITING* Make-JBL - Control 85 2.250W Four Channel Class-D Amplifier with following features:- 250W RMS per Channel, Amplifier output 100V/70V/4 Ohm, Supply input AC 110/230V-50Hz DC 24V, Short circuit protection, thermal & Electronic protoction. Cooling fans, Efficiency 90%, AC & DC fuses, SNR 90 dB .Make-Harman(JBL). Qty.: 3 nos. EXISITING* Make-Crown- Model to be confirmed by Customer 3.2.5 Sq mm Speaker Cable (as per actual) Qty.: 2160 m Make-Belden / Canare / Sommer / Proel 4.Various Audio Connectors to complete the system Qty.: 1 lot Make-Neutrik / Switchkraft / Amphenol The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary audio equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate audio solution for the same. All the items required to meet the desired audio output of the installation shall be under the scope of the bidder/execution agency. The necessary approvals to be taken from the museum design consultant and engineer-in- charge before execution of works. *These items have been procured already. Cost of installation, integration , testing and commisioning to be considered for these.

NS Jute Carpet Flooring - Providing and fixing carpet flooring made of jute hand-woven/braided by the special artist/craftsmen of desired size and thickness in the pattern and shade as per the approval of the design consultant. The carpet to be anti skid, excellent sound insulation,ease to maintain. The rate is inclusive of laying an underlay wherever required and fixing in place with necessary foam backing heavy duty adhesives, doble sided carpet tapes etc all complete as per the direction of engineer in charge. (AOR No.RA-11)

NS Projections with models/building depicting scenes of Battles in different regions of Haryana - The multimedia exhibition interactions showcase the battle scenes across Haryana in in details in the major cities i.e. Thanesar, Rohnat, Mewat, Gurgaon, Hisar etc. The overall space includes multiple projections show the details of the places/people/villages/areas etc where the battles occurred and were fought between the freedom fighters and the British. The Av content will be developed as a projection mapping show of 2-3 minutes on and will highlight the achievements of the Indians in these battles. 2D/3D Projections will be running on the artwork screens behind and on the exhibits. the projection content will be created in full HD resolution along with 2D/3D animation, motion graphics, illustrations as per the design consultant approval, along with required directional sound in two languages as per requirement.

HSR [23.22.4.3]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.3. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. SPN DB Double Door 12 way ( 2 incoming and 10 outgoing)

NS Touchscreen Kisok - Display : 13” FHD display with 10-point multi-touch functionality,Diagonal Size 13",Type Edge LED,Resolution 1920*1080 (Full HD),Pixel Pitch(mm) 0.153 x 0.153 Active Display Area(mm) 293.76 (H) x 165.24 (V),Brightness(Typ.) 300 (w/o Glass) nit,Contrast Ratio 600:1,Viewing Angle(H/V) 178/178,Response Time(G-to-G) 8ms(Typ.),Display Colors 16.7 M (real 6bit, dither 8bit),Color Gamut 45% Operation Hour 16/7,Haze 10%,Speaker Type,Built in Speaker(5W),Internal Player : Processor Cortex A72 1.7GHz Quad-Core CPU,Storage (FDM),8GB ,Operating System Tizen 4.0 (VDLinux),,inbuilt Processor : Cortex A72 1.7GHz Quad-Core CPU,with 5 year On site warranty. Qty.: 3 nos. Make-Samsung/LG/Panasonic/eq Mini PC for Info Kisok - Mini PC, Intel NUC i7/16GB/500GB/Win 10 Pro 64bit/Wireless KM/HDMI cable. Qty.: 3nos. Make-Intel/Dell/HP/ASUS Headphone - AutoPlay Available,Silver Conduit,8.4mm Cable Thickness,Available with Teardrop or Knuckle Mounting Plate,Fitted with a 90° Swivel Knuckle,With 3.5mm Headphone Jack,Ear Par Materia: Synthetic leather, circumaural ear pads. Qty.: 3nos. Make-BlackboxAV, Bose or eq Capacitive touch sensor - 12-15 Capacitive sensor that works from behind the corian,using aurdino and ESP. Make- Application - Touchscreen Application with Capacitive senor Make-Custom General note - The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary tech equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. Make- - The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate technical socution for the same. All the items required to meet the techonological intent of the installation shall be under the scope of the bidder/execution agency. Make-

NS S.I.T.C. 1100Volts grade cable as per I S: 7098, pt.1(latest edition) with stranded Aluminium / copper conductor; XLPE insulated, multi-core, bunched, armoured/un-armoured with overall heat resistant type ST-2 PVC insulation / Copper stranded conductor; PVC insulated as per I S: 1554 (latest edition) armoured/un-armoured with overall heat resistant type ST-2 PVC insulation on surface / underground / in Pipes / trenches including the cost of digging, sand cushioning with laying etc and refillinig the same in layers or by supporting them in walls and all other accessories as required. Cable shall have nominal identification plates at booth ends ('supply from' & ;supply to'). The sizes are as follows: - : 3.5C x 400 sq. mm. A2XFY

NS Photography and videography project documentation - Photoshoot and video shoot of all work including equipment like drones, special camera/ other necessary equipment for the overall museum to be included. Minimum 50 high resolution edited photographs, and other photographs unedited RAW files to be provided. Photography and videography professionals to be nationally awarded for their architectural/interior photography and videography works. A minimum of 50 short videos of 60 second each for marketing purposes to be included. An approval for the choice of professional to be brought on board for photography and video works to be taken from the design consultant/ department. Previous works should be submitted for evaluation and approval of the same. The output of this work will be used for the reception video wall film, coffee table book/ brochure development, website, social media marketing and any other project related application.

NS Backlit Glass panelling - Designing, Providing and Installation of 12mm thk toughened glass Info - Graphic glass panel of size 1200mm x 4500mm, mounted on on museum interior walls fixed on the wooden batten frame of section 100mmX50mm at 600mm c/c both ways and 12mm thick BWR grade plywood of Greenply/Century ply or similar makes on front side with all the necessary hardware's used to fix the Canvas , inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by museum design consultant. The Glass panel has to be backlit, with appropriate acrylic backing and LED light fixture with drivers and all necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by museum consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Choose high quality image from reliable source (min. 2500 pixels) for the best results • Check quality in Photoshop at 100% scale (proportionate to actual size desired) • Consider the viewing distance for the graphics • Complete print test (scale to final size, print small crop, apply patterns, view at actual distance, adjust) • Request a Sample Print from vendor if unsure of the expected results • Image quality impacts final image result: Image resolution is pixel data image holds, therefore the higher the resolution, the more detail the image will have. Inclusive of Print ready designed graphics , illustrations / artwork and Copywriting and editing of textual content in Hindi, English, , as per conceptual design provided by Museum consultant.

NS Artifact Display case (2400X1500X2100mm)(LXBXH) - Providing 2400X1500X2100 mm (L x W x H) Artifact Display Unit. Find the details in the attached drawing and the details of international standards mentioned below. Any differnce in size will be taken on prorata basis. (Refer image No. 15 at Page No. 99 for reference only) (Refer image No. 17 at Page 101) a) 900 mm high base of showcase unit of 19mm Ply board finished with 6 mm thick Corian. One side of the base with toughened glass panel (as per design) to be openable with all necessary hardware like channes screws etc complete. b) 2600X900x150 (L x W x H) Pedestal to be made of 19mm Ply board and finished with 8mm thick frosted glass as per drawing. c) 3300x1200mm wide and 1400 mm high 12mm thick toughened clear glass box over Corian base. Glass sides to be fixed with 10-15 mm thick pre factory finished powder coated metal beading on all the edges for support. Glass sides to be fixed with 10- 15 mm thick pre factory finished powder coated metal beading on all the edges for support. Three sides to be fixed and one side to be openable with the help of corian finished panel and necessary hardware like sliding channel, screws etc complete. The openable panel to be lockable with allen key lock as per drawing. Locking system should not be visible. Reference Image attached. d) 2600x100x 3mm thick mild steel sliding Signage finished with matt finish Duco paint and print as per design/ Graphic design. e) Artifacts to be placed by MS painted hooks/Industrial tapes etc. - Reference image attached. f) Clear glass should be used with blended edges as per reference video. g) Cost should include Borer / Anti termite treatment for plywood. h) Showcase unit to be made complete as per the drawing and details. i) Showcase unit to be approved by Engineer-in- charge.

HSR [24.2.8.8]LT CABLE 8.8. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 70 sqmm

NS Flush Doors- double leaf- lacquered glass Size -2000mmX2500mm - Providing and fixing of double leaf flush door made in block board of 35 mm thickness of approved make, including with door frame size 125mm x 75mm made of seasoned wood, fixed in line & level with necessary hardware, hinges, pivots etc all complete to make it functional. The rate is inclusive of providing and fixing on both sides of the door with 6mm thk toughened glass with highly resistant lacquer to one side of the glass of approved make and shade as per colour in specified in detail drawings and as approved by consultant. The rate is inclusive of fixing properly the glass with all necessary silicone adhesives, fittings, arrangement and making necessary holes wherever required etc. all complete as per direction of Engineer in charge. Size of door 2000mm X 2500mm. Providing and fixing of custom-made door handles of material Wood/MS of desired size and shape as per the design intent finished in polish/paint/duco/powdercoat etc approved by the museum design consultant. The cost is also inclusive of fixtures, screws, hardware, adhesives etc all complete as per the direction of engineer incharge.

NS Wooden Partition - 300mm (GI Framing with ply on both Sides) - Providing and fixing 300 mm overall thickness partition up to ceiling height consisting of G.I. frame with top cover of 12 mm commercial ply conforming to BWR grade of Greenply/Century ply or similar makes on both side with edge profiles, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm diametermeter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm diameterbolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and or ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, Galvanised M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each with zinc coating of 120 gms/sqm(both side inclusive)) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing. Inclusive of all - fixtures, fittings, hardware, hanging system, electrical, mechanical or any other mechanism required to make it functional.

NS Walking VR Simulator (VR Trademill) with screen - Virtual Walking simulator with VR device which output extended to 65" screen. HMD Specification :Display resolution: 1200 x 1080 (per eye),Display refresh rate: 90Hz or higher,Orientation sensors: Gyroscope,Audio: Hi-Res certificate headset , Hi-Res certificate headphone (removable) , High impedance headphone support accelerometer, magnetometer,4m custom smart cable,Replaceable facial interface.Simulator Specification : 6 DoF Electric actuators motion Platform The system must work with electric actuator stroke-100. Smooth Functioning Like trademil and same is sync with the content.Dimension of complete simulator is 1.5m * 1.5m maimum. Support custom application. Onsite 3 year warranty. Complet simulator working should be silent. Workstation i7/16GB/1TB/ Quadro GFX,Windows 10 pro, Rackmountable With 5 Year Onsite Warranty Extended Display : Supplying and installation LED TV with minimum bezel - 65" .Dynamic Crystal Color with Quantum Processor 4K for incredible picture quality,Resolution 3840x2160(16:9),Pixel Pitch(mm) :0.372 x 0.372,Brightness : 700 nits,Contrast Ratio : 4000:1,Color Gamut : 92% (DCI-P3, CIE 1976),Haze Non-Glare,Processor Cortex A72 1.7GHz Quad-Core CPU. Inclusive of all - fixtures, fittings, hardware, hanging system, electrical, mechanical or any other mechanism required to make it functional. Qty: 4 Nos. Make-Make : FUNVR or Custom as per required intend VR Walking Game Application - The VR application software to be developed in enterprise version / commercial version of the gaming engines (Unity3D, Unreal etc.) which supports real time 3d rendering and texture/ light baking. All the API Communication with any kind of server if need to be done in PHP/ MySQL as backend if needed. The developed application should have perpetual license and no subscription at any given point of time. Application/Software development cost to be inclusive of SRS, UI/UX, 2D design, 3D design or anything else needed to run the application. Application flow and UI/UX to be finalised once approved by the museum consultant/ authorities. Bidder will be responsible for submission of application source code technical documents and user manuals. All submitted documents to be digitally signed by the authorised signatory from the bidder Make-As per approved by museum Consultants VR Egg Arcade Simulator - VR Egg Shape Simulator with 3 DOF Electric Platform with 3 electric cylinder,Motion Angle :From to back : 25-30 degree, Left to Right : 25-30 Degree,voltage / power : 220V / 1.5 KW, Complete setup is silent working, Panic/Emergancy button should be active all the time,Onsite warranty : 5 year,Dimension of complete simulator is 1.5m * 1.5m maimum. Support custom application. Onsite 3 year warranty. Complet simulator working should be silent. Workstation i7/16GB/1TB/ Quadro GFX,Windows 10 pro, Rackmountable With 5 Year Onsite Warranty Extended Display : Supplying and installation LED TV with minimum bezel - 65" .Dynamic Crystal Color with Quantum Processor 4K for incredible picture quality,Resolution 3840x2160(16:9),Pixel Pitch(mm) :0.372 x 0.372,Brightness : 700 nits,Contrast Ratio : 4000:1,Color Gamut : 92% (DCI-P3, CIE 1976),Haze Non-Glare,Processor Cortex A72 1.7GHz Quad-Core CPU. Inclusive of all - fixtures, fittings, hardware, hanging system, electrical, mechanical or any other mechanism required to make it functional. Qty: 4 Nos. Make-9D or Custom or Eq. VR Egg Simulator Application - The VR application software to be developed in enterprise version / commercial version of the gaming engines (Unity3D, Unreal etc.) which supports real time 3d rendering and texture/ light baking. All the API Communication with any kind of server if need to be done in PHP/ MySQL as backend if needed. The developed application should have perpetual license and no subscription at any given point of time. Application/Software development cost to be inclusive of SRS, UI/UX, 2D design, 3D design or anything else needed to run the application. Application flow and UI/UX to be finalised once approved by the museum consultant/ authorities. Bidder will be responsible for submission of application source code technical documents and user manuals. All submitted documents to be digitally signed by the authorised signatory from the bidder Make-As per approved by museum Consultants Acessories - Cables& Connectors, Push-Pull Mounts, Power sockets, and everything to make exhbit function as per design consultants Make-ATEN/KRAMER/DLINK Or Eq General note - The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary tech equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. - The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate technical socution for the same. All the items required to meet the techonological intent of the installation shall be under the scope of the bidder/execution agency.

HSR [7.21.1]Brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: 1. Cement mortar 1:4 (1 cement : 4 coarse sand)

NS Souvenir Products Part 1 - Designing, prototyping and developing 10 products in 1000 quantity each of cost price Rs.45. The products are to be made with the narratives of 1857 freedom struggle of India museum which would be contemporary and tells a story to its users.The products in this price range are postcards, stickers, pins etc. All concepts for the products to be presented to the Design Consultant / Department at all stages for approval, The stages include (1) Design concepts (2) Prototyping (3) Final sample. Prototypes of the selected designs te be vetted by the Design Consultant / Department.

NS Stamping passport booklet - Concept design, detail design and print ready files for the following: 1. Stamping booklet of passport size approximately 100 mm x 120mm. The book would be of 20-30 pages atleast with premium print and paper quality. The book's content should explain the museum galleries' goals and provide a concise summary of their contents. The book to be made using 2d/3d graphics/illustration of international quality and proffessional images of the museum interors and context. 2. Desigining the booklet cover, back and atleast 10 leaflets should be connected to the museum narrative supported with 2d/3d graphics/illustration of international quality / proffessional images of the museum interors and context in a very compact format. Common Note: The cost of sampling to check material and print quality, layouting, graphics design to be covered in the item. The design language including colors, layout, imagery and typography to be in synchronisation with the museum branding theme. Stepwise approval on approach, concept design, pages layout, font type and sizes, coverdesign, pages design and color scheme should be taken, approval to be taken on the basis of samples received. The cost would also include 10 copies each of all the above mentioned 5 final products. The required copywriting and proofreading of international quality in the required languages to also be included in the item rate. copy-writing as per the requirement of the book. The installation should be complete in all respect with necessary approvals of museum design consultants and engineer -in-charge.

HSR [5.1.1]Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : 1. In lime mortar

HSR [23.1.6.4]COPPER WIRING IN MS CONDUIT (SURFACE/RECESS) 6.4. Wiring main ,sub mains and Circuit wiring in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in MS Conduit etc as required. 1 run of Size 6 Sqmm(1/2.80mm)

NS SITC of Round/ square recessed luminaire with contact frame with approx 16W in 3000/4000K with net delivered lumen at least 1800lm. The LEDs are set a long way back to minimize glare and guarantee a high level of visual comfort. The main body is made of die-cast aluminium with a radiant surface that guarantees optimum heat dissipation. Metallised, thermoplastic, high definition reflector - with the option of Medium, Flood, wideflood optic. The internal ring is made of thermoplastic available in a range of painted and metallised finishes.The diameter of the fixture should be 104mm with the contact frame. The Safety glass should be included with Quick and easy tool free assembly. High color rendering CRI 90 index 3000K LED. The fixture to support all possible Dimming Protocols DALI / Triac / Analog / DMX and to have optional reflectors accessories for elliptical distribution, diffuser glass, honeycomb louvre or decorative rings. Complies with EN60598-1 and pertinent regulations Lifetime: 50,000h - L80 - B10 (Ta 25°C). Fixture should have an option of White, Black finish and Internal frame should have option of White, Black, Gold, Chrome, Burnished Chrome options as per site requirement. Make: ERCO/ iGuzzini Laser/ Fagerhult (AOR No.RA-16)

HSR [23.23.6.3]MISCELLANEOUS 6.3. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 375 X 50 X 2 mm

NS Engineered Bamboo ceiling - Providing and fixing the engineered natural bamboo/ Bamboo Ceiling Board of approved thickness and size as per design. The ceiling members to be suspended from the structural ceiling at a distance of upto 900mm. The form of the ceiling to be varying from flat/slanting/curves as per design. Ceiling area above the bamboo ceiling to be painted in colour of matching shade before fixing this system.

NS 1.Supply Installation Testing & Commissioning of Two-Way 8-Inch Coaxial Ceiling Loudspeaker consisting of a 200 mm (8.0 inch) high tech cone driver and a 25 mm soft-dome liquid cooled tweeter mounted in a vented. Should have Frequency Response (-10dB):58 Hz – 20 kHz, Sensitivity:92 dB (1kHz - 16 kHz), Coverage Angle:90° conical, Maximum SPL (1m):118 dB peak, Impedance:8 ohms. Should be supplied complete with standard accessories as required. Make JBL Model CONTROL 18C/T. Qty.: 7 nos. EXISITING* Make-JBL - Control18CT 2.Supply Installation Testing & Commissioning of Dual channel 2X 150Watt Digital Power Amplifier. Power @8om-2x150W,Power@ 4om-2X250W,Frequency Response-20Hz-20KHz(+0,-0.5dB),THD+N- 0.05%,Siew Rate-25V/us,Damping Factor-100,Output Circuitry-Class AB,Signal to Noise Ratio- 85dB,Cross Talk- 60dB,Input Impedance-0.7V,Cooling-Two variable speed fans,Amplifier Protection-Short circuit, themal, over load, chip limiter, DC voltage Make-Harman(JBL). Qty.: 2 nos. EXISITING* Make-model to be confiremd by Customer 3.4x4 USB 2.0 Audio/MIDI Interface- 24-Bit/192 kHz resolution for professional audio quality, Compatible with popular recording software including Avid Pro Tools*, Ableton Live*, Steinberg Cubase*, etc. Streams 4 inputs / 4 outputs plus 1x MIDI I/O. Input/Playback Mix control and Stereo/Mono switch for direct monitoring. Status, Signal and Clip indications for perfect overview. Main Outputs on balanced XLR and 1/4" TRS connectors. Qty.: 1 nos. Make-Behringer / Presonus / Steinberg / Focusrite 4.2.5 Sq mm Speaker Cable (as per actual) . Qty.: 180 m Make-Belden / Canare / Sommer / Proel 5.Various Audio Connectors to complete the system. Qty.: 1 nos. Make-Neutrik / Switchkraft / Amphenol The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary audio equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate audio solution for the same. All the items required to meet the desired audio output of the installation shall be under the scope of the bidder/execution agency. The necessary approvals to be taken from the museum design consultant and engineer-in- charge before execution of works. *These items have been procured already. Cost of installation, integration , testing and commisioning to be considered for these.

HSR [23.22.4.8]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.8. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 12 way ( 8 incoming 3phase*12 outgoing)

NS Sensor projections on wall surface- Projection on the wall surface- - The AV will include 10 projection films of duration 30 seconds each taking about the different battles eventually won by the British army in different parts of India. An interactive exhibit includes a physical mashaal/torch carried by the visitors that resembles the torches that the freedom fighters carried during the freedom struggle. this torch will be carried by the visitor and when touched to the wall will trigger the projection on the wooden screen/diorama/surface in front. This interactive exhibit's content will provide the visitor with cues/triggers to tap and touch the 2D/3D Diorama and the output will be the visuals of the British taking over the villages/ monuments/places etc. in the various cities in India and beginning the atrocities. There will be a multiple interaction points for one participant and multiple participants and interact with the wall. Content using 2D animation/Motion Graphics/3D animation, illustration, models with live action shoot wherever required as according to theme and storyline. The visual language has to be derived from the artforms, images, paintings and lithographs etc. as approved by the design consultant. Ambient soundscape suitable with the visual content to be developed. All necessary photoshoot and video shoot to be included in the cost. The cost for any resources such as actors, costume, script, director, cameraman, music director, composer etc. required to be included in the cost. The content should be made in appropriate resolution as per screen size. All user interface design, wireframing and user experience design and development to be includes in item rate. The Software application / CMS / Online Portal should be based on UNITY GAME ENGINE WITH UNREAL REAL TIME 3D rendering tool. and MSSQL as backend with no additional license cost and unlimited uses. Complete UI/UX, 3D Modelling and Rendering also part of the application. App flow and UI/UX will be finalise after the approval of museum Consultants. Application Software source code needs to be handover in a hardisk. Bidder will be responsible for providing User Training, User Manuals for all types of users (including Administrator role) and Technical Documents. (Softcopy should be digitally signed by project manager of the vendor). User Experience should be easy and impactful.

NS screen printing - Providing and printing on smooth finished concrete , wood, metal with screen printing techniques, with the use of water based inks/ any other appropriate ink to create perfectly finished and smooth end product. The ink printed should be sealed with appropriate sealant after drying. Provide rate only, payment will be made based on actual quantities , as per conceptual design & approval by Museum Design Consultant. Rate to be quoted shall include the cost of custom designed graphics / 2D artwork , illustrations / artwork and Copywriting and editing of textual content in Hindi, English as per conceptual design provided by Museum consultant. With designed graphics , illustrations / artwork and Copywriting and editing of textual content in Hindi, English as per conceptual design provided by Museum consultant

NS Projector - Supply of 1-chip DLP LASER Phosphor Multimedia Projection system having, 9600 Lumens 20000 hours lamp life, 1920 x 1200 WUXGA Native Resolution, Inbuilt blending and warping with automatic caliberation software, 3000000:1 Contrast Ratio, inputs: HDBaseT,HDMI2.0, DVI-D, Active 3D, Motorised zoom and focus, alongwith 0.65-0.75 lens & projector mountin bracket etc. complete with installation as per the site requirement. Qty: 10 nos. Make- Christie,Barco,NEC, Digital Projection Media Server - Display media server/Workstation with 4K outputs as required , synced together. It should be capable of capturing content.Intel® i9 10th Gen, Rack Mountable workstation with 5 Year Onsite Warranty RAM- 32GB DDR4,SSD- 1TB(For WINDOWS BOOT), HDD: 2 TB , Nvidia Quadro GFX, 8GB, 3DP, Windows 10 Pro 64 Bi or higher config.It should also have genlock and framelock capability. Should also have Art-net Ethernet in/out. to complete the job with all respects. Qty: 5 nos. Make-Dell/HP/ASUS Mapping Software - 3D Projection mapping software, Playback control System to manage, schedule and control the media severs. It should have direct control on inputs and media timelines. It should have an option of being controlled by an external unit integrated with the software. to complete the job with all respects. Qty: 10 nos. Make- Dataton/Coolux/Pixera/Vioso/Equivalent Interactive Kit - Sensor Based Installation, Content triggered when visitor come in sensor area.Hokuyo UST-10LX. Qty: 4 nos. Make-Hokuyo UST-10LX Acessories - Transmitters- Recievers over CAT6 upoto 100 meter, CAT 6 cables,Connectors, Network Rack with acessories,Patch Panel network switch, and other accessories to required to make it fuctional Make-KRAMER/ATLONA/Dlink/Netrack/Comrack Interactive Application - The application software to be developed in enterprise version / commercial version of the gaming engines (Unity3D, Unreal etc.) which supports real time 3d rendering and texture/ light baking. All the API Communication with any kind of server if need to be done in PHP/ MySQL as backend if needed. The developed application should have perpetual license and no subscription at any given point of time. Application/Software development cost to be inclusive of SRS, UI/UX, 2D design, 3D design or anything else needed to run the application. Application flow and UI/UX to be finalised once approved by the museum consultant/ authorities. Bidder will be responsible for submission of application source code technical documents and user manuals. All submitted documents to be digitally signed by the authorised signatory from the bidder. Qty: 1 nos. Make-Custom Info Touchscreen Kisok - Display : 13” FHD display with 10-point multi-touch functionality,Diagonal Size 13",Type Edge LED, Resolution 1920*1080 (Full HD),Pixel Pitch(mm) 0.153 x 0.153 Active Display Area(mm) 293.76 (H) x 165.24 (V),Brightness(Typ.) 300 (w/o Glass) nit,Contrast Ratio 600:1,Viewing Angle(H/V) 178/178,Response Time(G-to-G) 8ms(Typ.),Display Colors 16.7 M (real 6bit, dither 8bit),Color Gamut 45% Operation Hour 16/7,Haze 10%,Speaker Type,Built in Speaker(5W),Internal Player : Processor Cortex A72 1.7GHz Quad-Core CPU,Storage (FDM),8GB ,Operating System Tizen 4.0 (VDLinux),,inbuilt Processor : Cortex A72 1.7GHz Quad-Core CPU,with 5 year On site warranty. Qty: 4 nos. Make-Samsung/LG/Panasonic/eq Mini PC for Info Kisok - Mini PC, Intel NUC i7/16GB/500GB/Win 10 Pro 64bit/Wireless KM/HDMI cable. Qty: 4 nos. Make-Intel/Dell/HP/ASUS Headphone - AutoPlay Available,Silver Conduit,8.4mm Cable Thickness,Available with Teardrop or Knuckle Mounting Plate,Fitted with a 90° Swivel Knuckle,With 3.5mm Headphone Jack,Ear Par Materia: Synthetic leather, circumaural ear pads. Qty: 4 Nos. Make-BlackboxAV, Bose or eq Acessories - Transmitters- Recievers over CAT6 upoto 100 meter, CAT 6 cables,Connectors, Network Rack with acessories,Patch Panel network switch, and other accessories to required to make it fuctional. Qty: 1 nos. Make-KRAMER/ATLONA/Dlink/Netrack/Comrack General note - The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary tech equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. - The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate technical socution for the same. All the items required to meet the techonological intent of the installation shall be under the scope of the bidder/execution agency.

HSR [23.2.5.1]COPPER WIRING WITH MODULAR SWITCHES IN MS CONDUITS (SURFACE/RECESS) 5.1. Wiring in MS conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required Group A

NS Projector - Supply of 1-chip DLP LASER Phosphor Multimedia Projection system having, 6700 Lumens 20000 hours lamp life, 1920 x 1200 WUXGA Native Resolution, Inbuilt blending and warping with automatic caliberation software, 3000000:1 Contrast Ratio, inputs: HDBaseT,HDMI2.0, DVI-D, Active 3D, Motorised zoom and focus, alongwith 0.65-0.75 lens & projector mountin bracket etc. complete with installation as per the site requirement. Qty.: 6nos. Make-Christie/Barco/NEC Media Server - Display media server/Workstation with 4K outputs as required , synced together. It should be capable of capturing content.Intel® i9 10th Gen, Rack Mountable workstation with 5 Year Onsite Warranty RAM- 32GB DDR4,SSD- 1TB(For WINDOWS BOOT), HDD: 2 TB , Nvidia Quadro GFX, 8GB, 3DP, Windows 10 Pro 64 Bi or higher config.It should also have genlock and framelock capability. Should also have Art-net Ethernet in/out. to complete the job with all respects. Qty.: 3nos. Make-Dell/HP/ASUS Mapping Software - 3D Projection mapping software, Playback control System to manage, schedule and control the media severs. It should have direct control on inputs and media timelines. It should have an option of being controlled by an external unit integrated with the software. to complete the job with all respects. Qty.: 6nos. Make- Dataton/Coolux/Pixera/Vioso/Equivalent Coomunication Equipment - Telegram (Morse Keyer Telegraph) unit will be installed on 8 tables and show live communication and transition will be showed by LED effect and message display on projection. Qty.: 8nos. Make-Custom Special Effect - Optical Fiber light installation in ceiling to show the transmission of messages Make-Custom General note - The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary tech equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. - The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate technical socution for the same. All the items required to meet the techonological intent of the installation shall be under the scope of the bidder/execution agency.

NS Display - Supplying and installation LED TV with minimum bezel - 65" .Dynamic Crystal Color with Quantum Processor 4K for incredible picture quality,Resolution 3840x2160(16:9),Pixel Pitch(mm) :0.372 x 0.372,Brightness : 700 nits,Contrast Ratio : 4000:1,Color Gamut : 92% (DCI-P3, CIE 1976),Haze Non-Glare,Processor Cortex A72 1.7GHz Quad-Core CPU. Inclusive of all - fixtures, fittings, hardware, hanging system, electrical, mechanical or any other mechanism required to make it functional. Qty: 4 nos. Make-Christie,Samsung/LG/Panasonic/Delta Sensor to Connect brick trigger Content - TF Mini Lidar Sensor. Qty: 4 nos. Make-TF Mini Acessories - All acessories to make exhbit functional Make-Job General note - The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary tech equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. - The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate technical socution for the same. All the items required to meet the techonological intent of the installation shall be under the scope of the bidder/execution agency.

NS Live paintings with Interaction points - To dynamic visual will highlight the details of of each area/city/place will have a images/ lithograph/paintings etc. in front which will come alive once the visitor interacts with the painting. The painting/image will have an interaction point in front with an interactive touch screen/ sensor based object etc. which when touched by the visitor will trigger the painting in front and make it come live. when triggered the visual in front will give the details about that place/person. this live animation will be of 30-60 seconds each and at different locations each.The projection content will be created in full HD resolution along with 2D/3D animation, motion graphics, illustrations as per the design consultant approval.

HSR [24.2.7.6]LT CABLE 7.6. Supply and erection of suitable compression type brass cable glands for underground Cable :- 240 sqmm to Cable 3 to 32 Core

NS Wall mounted Artefact table (1200x600mm) - Providing and Fixing of artefact table of size 1200x600mm with base made of 50X50mm hollow sections of desired thickness with appropriate spacing and necessary welding at junctions including applying of required coats of steel primer on sections. The cost is inclusive of providing and fixing 12mm thk commercial ply of approved make on MS frame work with necessary hardwares,screws etc all complete. The top to be finished in 12 mm thk corian of approved make and shade fixed to the ply with silicone adhesives including buffing and polishing of the surface as per approved drawings. The corian top will be etched with artwork. The remianing area to be painted in duco of approved shade. a)Providing and fixing of display glass case of 8 M.M thick toughened glass of height 250mm on all four side fixed on 12mm-15mm thk aluminium channels and top placed of size as/specifications/design. The cost is inclusive of fixing of all edges with extra clear silicone with necessary fixtures and allen key locking arrangement (not to be visible on the face) b)Providing and fixing of 6 mm thick white lacquered glass on the top and all four sides of base to place the artefacts with edges bevelled at an angle on all edges as per approved detail drawings fixed to a ply base with extra clear silicone .

HSR [23.22.3.3]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 3.3. Supply and erection of sheet steel enclosures 1pole/2 pole/4 pole on wall/on existing pedestal complete as required. TPN enclosure suitable for TP , TPN or FP MCB

NS Haryana craft furniture - Designing, providing, and fixing of 3-4 typology of furniture in local haryana crafts made out of wood/ fabric/ jute/ niwar/ cotton strands or equivalent. The furniture to have high quality finish, with premium material, complete with cushioning, springs etc. required for the comfort of the visitors. The furniture to be designed such that the visitor can lay on it to look at the ceiling installation. The cost includes providing and fixing of 75-150 mm overall thickness framework to form a base consisting of ms/wooden section 50X50mm/75X75mm/ as per site requirement of desired thickness in a grid pattern with 600mm c/c spacing bothways (horizontal and vertical) or at required spacing near opening, with necessary fixing at junctions. The cost to be inclusive of applying one coat of steel primer/ anti termite solution of approved quality on the framework. The rate to be also inclusive of providing and installing top cover of 19mm plyboard conforming to BWR grade of Greenply/ Duroply/ Century ply or similar makes with edge profiles, including the cost of necessary hardware, screws etc all complete as per approved drawings and the direction of engineer in charge. The framewok will have cushioning on top of appropriate thickness that will be finished on top with stain free custom made fabric skin, the fabric should be resistant to wear and tear, made of polyester/cotton/jute/khadi. Inclusive of all - fixtures, fittings, hardware, hanging system, or any other mechanism required to make it functional. The installation should be complete in all respect with necessary approvals of museum design consultants and engineer -in-charge. The size of the furniture to be : (1500X3000X450mm)

NS Technical Staff-AV, mix media installations, digital equipment and electricals - Role and Responsibility: Duty Engineers (Electrical)-Assembling, evaluating, testing, and maintaining electrical or electronic wiring, equipment, appliances, and apparatus. Troubleshooting and repairing malfunctioning equipment, appliances, and apparatus. Constructing and fabricating parts, using hand tools and specifications. Experience -should have an experiance of working in the lighting operation and management field for at least 5 years. -Should have a good knowledge in all the tech. used in the museum. Qualification- Bachelors in technology with the relavent feild from nationally/internationaly renowned institute

HSR [23.23.6.1]MISCELLANEOUS 6.1. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 100 X 50 X 2 mm

NS Wood artefact casing - Providing and fixing Artefact table with Wooden batten framework and w.p.c board and enclosed with 6-18 mm Ply finished with duco paint/as per the approval of the museum design consultant of size as per design and extra clear glass casing with printed/lacquered glass base for the artefacts/replicas as per the specifications and drg as approved by the Engineer in charge

NS Projector - Supply of 1-chip DLP LASER Phosphor Multimedia Projection system having, 9600 Lumens 20000 hours lamp life, 1920 x 1200 WUXGA Native Resolution, Inbuilt blending and warping with automatic caliberation software, 3000000:1 Contrast Ratio, inputs: HDBaseT,HDMI2.0, DVI-D, Active 3D, Motorised zoom and focus, alongwith 0.65-0.75 lens & projector mountin bracket etc. complete with installation as per the site requirement. Qty: 11 Nos. Make- Christie,Barco,NEC, Digital Projection Media Server - Display media server/Workstation with 4K outputs as required , synced together. It should be capable of capturing content.Intel® i9 10th Gen, Rack Mountable workstation with 5 Year Onsite Warranty RAM- 32GB DDR4,SSD- 1TB(For WINDOWS BOOT), HDD: 2 TB , Nvidia Quadro GFX, 8GB, 3DP, Windows 10 Pro 64 Bi or higher config.It should also have genlock and framelock capability. Should also have Art-net Ethernet in/out. to complete the job with all respects. Qty: 5 Nos. Make-Dell/HP/ASUS Mapping Software - 3D Projection mapping software, Playback control System to manage, schedule and control the media severs. It should have direct control on inputs and media timelines. It should have an option of being controlled by an external unit integrated with the software. to complete the job with all respects. Qty: 11 Nos. Make- Dataton/Coolux/Pixera/Vioso/Equivalent Acessories - Transmitters- Recievers over CAT6 upoto 100 meter, CAT 6 cables,Connectors, Network Rack with acessories,Patch Panel network switch, and other accessories to required to make it fuctional Make-KRAMER/ATLONA/Dlink/Netrack/Comrack General note - The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary tech equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. - The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate technical socution for the same. All the items required to meet the techonological intent of the installation shall be under the scope of the bidder/execution agency.

HSR [5.1.2]Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : 2. In cement mortar

NS 1. Atrocities-Execution by cannons - Providing, fabricating, installation and finishing of artistically designed ruins/ burnt/ charred/ broken scenography recreation of public execution by blowing from a cannon of 1857 colonian India used by the British, of tentative size 3m x 2m with height upto 4m having structural framework in wood/ M.S. sections upto 75x75mm covered in 12mm-18mm commercial ply/board, finished on both sides in materials such as FRP/POP/ cement plaster/micro topping/ paint finish or similar. The surface finish to be good for projection. The installation quality, mechanism and finish should conform to the International standards of museums. The installation to include the cnc cutting/etching of artwork on upto 50% of the surface. The cost is also inclusive of designing, fabricating, installation and finishing of replica of a cannon of desired size in FRP/wood/metal/cast iron/ as per design. The cannon to be a part of a projection show hence the surface finish to be good for projection having structural framework in wood/metal with wire mesh or other suitatble material, finished in materials such as FRP/POP/foam/hay/straw/white cement/ synthetic wax/resin/fabric/ paint/ microtopping/clay or other material with highly precise aesthetic properties. The installation quality, mechanism and finish should conform to the International standards of museums. The installation is inclusive of all - fixtures, fittings, hardware, hanging system, or any other mechanism required to make it functional. These signature installations to be made by specialized agencies having experience in making sculptures, set design, mannequins, wax models, artwork etc. The commissioned artist/execution agency on board for the installations to take necessary prior approvals from museum design consultant before execution. Please refer to the design presentation for further details. Area : 6 sqm 2. Atrocities Ruins-Debris - Providing, fabricating, installation and finishing of artistically designed ruins/ burnt/charred/broken scenography recreation of war ruins including debris such as broken/burnt bricks, sticks, haystack, canes, armours etc with materials such as original material/FRP/POP etc specially crafted and laid/fixed on setup with necessary hardwares if required. Materials such a wood/ply/ M.S. sections to be used for structural form finished on both sides in materials such as FRP/POP/ cement plaster/micro topping/ paint finish or similar as per approved design. The surface finish to be good for projection. The installation quality, mechanism and finish should conform to the International standards of museums. The installation to include the cnc cutting/etching of artwork on upto 50% of the surface. The installation is inclusive of all - fixtures, fittings, hardware, hanging system, or any other mechanism required to make it functional. The commissioned artist/execution agency on board for the installations to take necessary prior approvals from museum design consultant before execution. Please refer to the design presentation for further details. Area : 153 sqm 3. Amphitheatrical steps - Providing and fixing of amphithatrical stepped seating made up of M.S. angle in tube/ISMB dully welded with the base plate of desired size and thickness duly fixed with necessary fixtures, fasteners/nut bolts etc all complete with the existing base. The structure to be vetted by structural consultant keeping in mind the live load required. covered in the fabric/rug designed by a special artist of punja dari artwork of Haryana as per approved having 4-5 seating platforms of high risers of 300mm with intermediate climbing steps. The structure of the stepped auditorium seats to be in M.S./ wooden section of size as per structural requirements. The railing to be provided as per as per design. The seating to be 9.8m wide and 2.7m in length. The steps to be covered in carpet made of weaving craft of punja dari by the special artist/craftsmen in the approved pattern and shade. The carpet to be anti skid, excellent sound insulation,easy to maintain with self levelling compound of desired colour, applied as per the area demarcated in the drawing. The carpet to cover the amphitheatrical seating and the mezzanine floor.The commissioned artist/execution agency on board for the installations to take necessary prior approvals from museum design consultant before execution. Qty. 1 nos. 4. Custom design finishes: - To evocate the feelings of war chaos, the gallery is consists of designed finishes that are broken, burnt, destroyed. Following are the finishes that are to be designed in such way: 5. Customized IPS flooring - Providing and laying of custom designed 75mm thick IPS flooring. The cost is inclusive of providing an under layer of concrete of 63mm thickness with a mix of CC 1:2:4 (1 part cement, 2 parts coarse sand and 4 parts graded stone aggregate-12.5 mm and downgraded). The top layer to be 12mm thick. The flooring shall be laid in panels of uniform sizes of 2 SqM or as per approved design.The surface of the RCC slab shall be roughened up with brushes while the concrete is green. Before laying the floor, the laitance, loose materials, cake of mortar dropping shall be removed and the surface of the slab hacked and coat of cement slurry @2.75 kg of cement per SqM. shall be applied so as to get a good bond between the slab and IPS. If IPS has to be provided on lean concrete no slurry is required. The top finish coating to be as per approved by the Museum Design Consultant. Area : 376 sqm 6. Customized Gravel Flooring - Providing and laying of customised gravels/ stone aggregate as specified by the museum design consultants on the desired locations inside/outside of the buildings mentioned as per the approved drawings. It shall consist of naturally occurring (uncrushed, crushed or broken) river bed shingle or pit gravel. It shall be sound, hard and clean. It shall be free from flat particles of shale or similar laminated material, powdered clay, silt, loam, adherent coating, alkali, vegetable matter and other deleterious substances. Pit gravel shall be washed if it contains soil materials adhering to it. These shall conform to IS 383 unless otherwise specified. Area : 62 sqm 7. Customized Mud flooring - Providing and laying of 10mm - 12mm Thk. Mud plaster with 5% cement mixed with local mud and chopped and sifted straw laid in a single unjointed layer rammed thoroughly upto a desired thickness. The finish layer applied to be a mixture of cow dung and clay with a thickness of min 1mm on with rapid curing on existing false floor similar to ground surface of various archeology excavation sites found in haryana, with MS wire mesh gauge as per area demarked on drawing , as per approval by museum design consultant. Area : 76 sqm 8. False Flooring - 150mm - Providing and Fixing of False floor with MS tubular section of 50mmX50mm/75mmX75mm/as per requirement of desired thickness with appropriate spacing and necessacr welding at junctions including application of 25mm to 32mm thick BWR grade plywood/board of Greenply/Century ply or eqv fixed to base with 2mm thk MS plate of desired size and base properly welded with all fasteners and necessary hardware's with edge profiles, beadings etc all complete as per approved design. The rate is also inclusive of two coats of MS primer on the frame structure and one to two coats of anti termite oil finish on ply board. Height of False flooring to be considered is 150mm alongwith provision of cove as per design requirement. Area : 36 sqm 9. Mangalore tile ceiling - Providing and fixing custom designed terracotta tile ceiling of size and proportion of a custom brick with supports as per design. Inclusive of M.S. T angles/wooden rafters as per structural consultants. The ceiling to be complete with all the necessary hardwares and accessories required for the ceilig suspension and durability. Area : 200 sqm 10. Burnt Flag ceiling - Providing, fixing and installation of ceiling installation made of flags of various regions during 1857 in printed fabric such as custom made cotton/linen/canvas or similar of variable sizes of width upto 1500mm and length up to 4000mm. The fabric to be suspended from ceiling with approved fixing detail as per the direction of the museum design consultant. The installation quality, mechanism and finish should conform to the International standards of museums. The installation is inclusive of all - fixtures, fittings, hardware, hanging system, or any other mechanism required to make it functional. The commissioned artist/execution agency on board for the installations to take necessary prior approvals from museum design consultant before execution. Please refer to the design presentation for further details. Area : 135 sqm 11. Custom made Red sandstone - Providing and laying of designed burnt, charred, broken red sandstone flooring with custom artwork in varying sized of 300x300mm, 600x300mm, 600x1200mm in the pattern as per the design. (Require specs from old boq's-PMC) Area : 42 sqm 12. Micro topping finish on walls - Providing and fixing micro- topping wall system composed of polymer (not water) mixed with special cement admixture of desired shade, texture and approved make as per the direction of museum design consultant. The rate to be inclusive of preparing a sub base free of dust, laitance, oils or any loose material with a provision of any expansion, contraction and crack inducing joints to avoid cracking, unevenness and faults, including application of Epoxy-coat mixed with 20% quartz-sand (0,2-0,5mm) as adhesion primer and covering thoroughly the surface with quartz-sand on substrate. Rate includes the application of two coats of base coat with 0.5mm coarse sand used as gauge evenly spread upto maximum thickness of 0.5mm. Followed by application of upto two coats of very thin layer of finish coat or high-performance coat without coarse sand for smooth appearance. The final coat is to be sealed with acrylic or PU sealer all complete as per the direction of engineer incharge. Approved make : Bharat Flooring/idealworks/eqv Area : 145 sqm 13. General note - The installation quality, mechanism and finish should conform to the International standards of museums. Artwork is to be designed by a special artist familiar with the craft and made by local/indigenous artisans/craftsmen with prior experience in the craft. The artist assigned should take all the necessary approvals from the museum design consultant. The installation is inclusive of all - fixtures, fittings, hardware, hanging system, or any other mechanism required to make it functional. Please refer to the design presentation for further details. The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation. All the items required to meet the intent of the installation shall be under the scope of the bidder/execution agency. Please note that the crafts defined in the installation are subject to be interchanged during the detail design stage. The installation should be complete in all respect with necessary approvals of museum design consultants and engineer -in-charge.

HSR [23.22.4.10]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.10. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. Vertical TPN DB Double Door 6 way ( 8 incoming 3phase*6 outgoing)

NS Window Roller Blinds - Rollar blackout Blinds:Providing and Fixing of roller blinds of variable colour and customised design :Ivory Mount Type :Wall Mount & Ceiling Mount Wash Care :Spot Clean Fabric :Faux Wood Transparency :10% , Chlid Saftey lock providing manual folding over and the frame should be in desired color.

NS WALLS Brick Walls - ‘Aphony Gloss Seamless panel’ tiles 25 mm. Providing and Fixing of ‘Aphony Gloss Seamless panel’ tiles 25 mm thick with square edge made of Gloss base panel with Wood Fibre 1mm width cement composites covered with AcousticallyTransparent Absorptive printed microfibers on the front side pasted on site with sprayableglue as per the choice of the Architect/ person in charge of size 1200X1200 mm withseamless finish. Has excellent noise absorption of 0.74 (for base panel) as per ISO: 354-1985 and ASTM 423-90 a, STC of 47 as per ASTM E90/413 for 25mm, Density 400 Kg/ m3, meets stringent and BS:476 , weather resistance as per IS 3308, Thermal Insulation as per IS:3346-1980 with relative humidity of 90% RH at 60o Celsius (140o Fahrenheit) for 15 days= No deterioration. Conforms to En 131682001 and are RoHS Complaint Fire Retardant ASTMD 635-1991/Insulation and IS 15061-2002 for excellent results Anti Bacterial test as per JIS-Z2801-2010. To be installed on Brick Wall on Ply Strips. ( AOR No.RA-03 )

NS Gobo Projector - Ceiling Light Projection System RGB liquid crystal shutter projection system Projection Method Direct Mounting, Lighting Track (requires Lighting Track option), Floor Standing (requires Floor Stand option) Driving Method Poly-silicon TFT Active Matrix Pixel Number 1,024,000 dots (1280 x 800) x 3 Color Brightness3 Color Light Output: 2,200 lumens White Brightness3 White Light Output: 2,200 lumens Aspect Ratio 16:10 widescreen Native Resolution WXGA (1280 x 800) Light Source Laser Diode Laser Life1 Normal Mode: Up to 20,000 hours Extended Mode: Up to 30,000 hours Throw Ratio Range 1.38 (Zoom: Wide), 2.19 (Zoom: Tele) Size (Projected Distance) 30" – 150" [0.88 – 4.51 m] (Zoom: Wide) Keystone Correction Manual Vertical: ± 45 degrees; Horizontal: ± 40 degrees Dynamic Contrast Ratio Up to 2,500,000:1 Color Reproduction Up to 16.7 million colors Project from Nearly Any Angle Movement: Left/Right: 180 degrees, Up/Down: 180 degrees; Ball-joint Axis Rotation: 360 degrees Track Compatibility Halo: TEK441, 442, 443 Juno: TEK44FT(Black/White) Global Trac: TEK44-1, 44-2, 44-3, Lens Type Optical zoom (Powered)/Focus (Powered) F-number 1.51 – 1.92 Focal Length 18.2 – 28.4 mm Zoom Ratio 1 – 2.21 (Total), (Optical zoom: 1 – 1.58, Digital zoom: 1 – 1.4) with Media Player .The Rates inclusive of all software, hardware, electricals, servers, other , necessary cables, networking and any supportive technology required to make it functional as per concept. The sound output to match premium cinema theatre level experience. Make-EPSON/Christie/Barco

NS Perforated ceiling - Providing and fixing of perforated metal false ceilings with perforation pattern as per the approval of museum design consultant. Inclusive of all - fixtures, fittings, hardware, hanging system, electrical,mechanical or any other mechanism required to make it functional.

HSR [24.1.14]EARTHING AND LIGHTENING ARRESTOR 14. Supply and erection of 20mm x 3 mm thick GI, tape fixed with suitable G.I. staples of same size.

NS Type 9 - Single leaf- manual sliding door - metal - 1500x2500 mm - Providing and fixing of manually opening wooden/metal sliding partition with provision to accommodate acoustic material. Top cover to be metal sheet/ metal finish/ micro-topping/ metal laminate. Size of the door 1500 X 2500mm. Height of the door to be variable as per lintel level on site.

HSR [7.22.1]Brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : 1. Cement mortar 1:4 (1 cement : 4 coarse sand)

NS Haryana Industrial advancement installation - Providing, fabricating and fixing of a installation to highlight the importance of industrial advancement of Haryana made of various machinery parts like gears, truck parts, tyres, headlights, pistons, ball bearings, etc, of agricultural equipments, automobiles, such as tractors, motorcycles or any other parts /abstraction of parts required for the installation. The installation is around the columns with tentative size 3m x 3m and height of 4m. The various parts to be procured and conserved from the industrial scrap, replica of the parts to be made as per required in materials such as metal/ frp/ wood as per design. The installations to have moveable and rotating parts as per design. The base installation to be in FRP/POP/foam/hay/straw/white cement/ synthetic wax/resin/fabric/ paint/ having structure as per required. Provision for the framework of the installation to be considered to meet the design aesthetics and the structural requirements. The installation quality, mechanism and finish should conform to the International standards of museums. The installation is inclusive of all - fixtures, fittings, hardware, hanging system, or any other mechanism required to make it functional. The commissioned artist/execution agency on board for the installations to take necessary prior approvals from museum design consultant before execution. Please refer to the design presentation for further details. General note - The installation quality, mechanism and finish should conform to the International standards of museums. Artwork is to be designed by a special artist familiar with the craft and made by local/indigenous artisans/craftsmen with prior experience in the craft. The artist assigned should take all the necessary approvals from the museum design consultant. The installation is inclusive of all - fixtures, fittings, hardware, hanging system, or any other mechanism required to make it functional. Please refer to the design presentation for further details. The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation. All the items required to meet the intent of the installation shall be under the scope of the bidder/execution agency. Please note that the crafts defined in the installation are subject to be interchanged during the detail design stage. The installation should be complete in all respect with necessary approvals of museum design consultants and engineer -in-charge.

NS S.I.T.C. 1100Volts grade cable as per I S: 7098, pt.1(latest edition) with stranded Aluminium / copper conductor; XLPE insulated, multi-core, bunched, armoured/un-armoured with overall heat resistant type ST-2 PVC insulation / Copper stranded conductor; PVC insulated as per I S: 1554 (latest edition) armoured/un-armoured with overall heat resistant type ST-2 PVC insulation on surface / underground / in Pipes / trenches including the cost of digging, sand cushioning with laying etc and refillinig the same in layers or by supporting them in walls and all other accessories as required. Cable shall have nominal identification plates at booth ends ('supply from' & ;supply to'). The sizes are as follows: - : 3.5C x 120 sq. mm. A2XFY

NS Display - 65" - Supplying and installation LED TV with minimum bezel - 65" .Dynamic Crystal Color with Quantum Processor 4K for incredible picture quality,Resolution 3840x2160(16:9),Pixel Pitch(mm) :0.372 x 0.372,Brightness : 700 nits,Contrast Ratio : 4000:1,Color Gamut : 92% (DCI-P3, CIE 1976),Haze Non-Glare, Processor Cortex A72 1.7GHz Quad-Core CPU. Inclusive of all - fixtures, fittings, hardware, hanging system, electrical, mechanical or any other mechanism required to make it functional. Make-Christie,Samsung/LG/Panasonic/Delta

NS SAFETY EQUIPMENT (Electrical & UPS Room only - H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

HSR [23.22.4.5]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.5. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 4 way ( 8 incoming and 3phase*4 outgoing)

NS SAFETY EQUIPMENT (Electrical & UPS Room only - : Fire Bucket filled with Sand

NS Hologram - Holographic projection of duration 2-3 minutes showcasing the scene of atrocities being committed by the British on the freedom fighters of India, mix media content including 2D animation/Motion Graphics/3D animation and models with archival footages wherever required as according to script and storyline. The content to include green screen shoot with minimum 2 actors to depict the execution scene carried out by a British official on a villager and other people looking in the backgground. The content will run on loop and to be supported with voiceover in atkleast 2 languages and appropriate sound design as per the theme and effect of the installation. The rate to include all 3D modelling, required photo/video shoots, rendering, vfx etc required for the complete experience of the virtual tours. All necessary photoshoot and video shoot to be included in the cost. The cost for any resources such as actors, costume, script, director, cameraman, music director, composer etc. required to be included in the cost. The content should have original music score. The content should be made in appropriate resolution as per screen size. Please refer video no.

NS Sliding Wooden curved Partition - 75mm - Providing and fixing 75 mm overall thickness curved sliding/openable partition up to ceiling height (up to 6 meters)consisting of G.I./ms frame with top cover of HDWR / HDMR conforming to BWR grade on both side with edge profiles, including providing and fixing of frame work made of special section, formaldehyde free, fire retardant. Make Sipla/ UP Twiga/ Orwens Corning / - Installed with MS wire mesh. Installation complete with all necessary Hardware. Inclusive of all - fixtures, fittings, hardware, hanging system, electrical, mechanical,sliding rails,remort control or any other mechanism required to make it functional. the automated opening mechanism should seamless in visual and audio should be synced with the AV content played in the insallation for opening and closing.

NS Artifact Display case (1800X500X2400mm)(LXBXH) - Providing 1800X500X2400 (WxDxH)mm Artifact Display Unit for wall. Find the details in the attached drawing and the details of international standards mentioned below. Any differnce in size will be taken on prorata basis. a) 150mm high base & 1775x288x75mm back side panel of showcase unit of 19mm Ply board finished with 6 mm thick Corian. b) 1525X 2550 x75 (WxHxD) Pedestal to be made of 19mm Ply board and finished with 8mm thick frosted glass as per drawing. c) 1725x425x2575mm (WxDxH) Toughened glass box shutter with 75x100mm 19mm thick Ply board frame (as per design) to be openable with all necessary hardware like heavy duty Stainless Steel Hydraulic Hinges, screws etc complete. Glass sides to be fixed with 10-15 mm thick pre factory finished powder coated metal beading on all the edges for support. The openable panel to be lockable with allen key lock. Locking system should not be visible. Reference Image attached. d) 1325x 100x 3mm thick mild steel sliding Signage finished with matt finish Duco paint and print as per design/ Graphic design. e) Artifact Display Unit to be fix on the wall with the help of necessary hardware like screws. chemical fastener etc. all complete. f) Artifacts to be placed by MS painted hooks/Industrial tapes etc. - Reference image attached. g) Clear glass should be used with blended edges as per reference video. h) Cost should include Borer / Anti termite treatment for plywood. i) Showcase unit to be made complete as per the drawing and details. j) Showcase unit to be approved by Engineer-in-charge.

NS Custom made door handles - Providing and fixing of custome made door handles of material Wood/MS of desired size and shape as per the design intent finished in polish/paint/duco/powdercoat etc approved by the museum design consultant. The cost is also inclusive of fixtures, screws, hardware, adhesives etc all complete as per the direction of engineer incharge.

HSR [24.5.2.7]MISCELLANEOUS ITEMS 2.7. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 180/150 mm outer dia/ inner dia

NS Haryana Map Installation - This installation intends to highlight the importance of the revolt centres in haryana, highlighting various routes, road connectivity as well as the geographical fabric of Haryana. The installation will have 2d/3d maps along floor, walls, and ceiling. The main components of the installation are as follows: Map model and shell - Providing, fabricating, detail deisgning and fixing of 3d Haryana map model 3D printed/digitally fabricated as per design approval in plastic/MDF/Rubberised Cork/acrylic solid surface spanning across floor, walls and ceiling the room of size of 21000mmX14000mm. The height of the model to vary from 12mm-450mm as per design. The model to be finished in duco paint/projection paint/ microtopping or as per design approval. The structural curvable of the shell to be made in 75-150mm thick partition having M.S./wooden battens framework with 12-18mm thick flexible ply, finished on top with etched MDF/acrylic solid surface/duco paint/vinyl graphics/UV printing as per design. To attain the desired shell shape materials such as foam, sunboard, pop, GI mesh, glasswool to be included. The hollow space to be filled with glasswool to achieve the desired acoustics levels.To ensure the smoothness of the curvature structural 3d visualization and 2d drawings to be made. The map to be etched/embossed on the shell surface as per required. The structural stability of the shell and the model to be checked by a structural engineer. Provision for programmable lighting within the model. All necessary provisions for projector, lighting, speaker mounting to be provided. All Mild steel will be coated with anti-rust coating / paint. Provision for openable shutter as per requirement of the installation for its maintenance and operation to be also provided. images provided by museum interior consultant. Inclusive of all - fixtures, fittings, hardware, hanging system, electrical, mechanical or any other mechanism required to make it functional as per the design. Relevant Data expert to be brought on board as required for achieving authenticity of the model. Specialized artist/sculpturist on board for the installations to take necessary prior approvals from museum design consultant before execution. (the cost of lighting to be excluded) Area : 275 sqm. Battle Models with base - Designing, fabricating, installation and finishing models/sculpture as per scenography requirements including props in approx. on site of 3D printed/wooden/metal models of avg. size - 0.15m x 0.15m x 0.15m - .45mx.45mx.45m having structural framework in wood/metal with wire mesh or other suitatble material, finished in materials such as / FRP/POP/foam/hay/straw/white cement/ synthetic wax/resin/fabric/ paint/ microtopping/clay or other material with highly precise aesthetic properties. Each model shall have NFC/ RFID tag on it, which when interacting with the sensor screen will display information on the tablets. The mannequins to have accurate adornments and accesories such as headgear, clothes, suitable farming tools, weapons, etc. and state-of-the-art hyper-realistic features with attention to details such as skin texture, skin tones, hair, physical attributes etc. to be recreated as per design reference. The installation quality, mechanism and finish should conform to the International standards of museums. The installation is inclusive of all - fixtures, fittings, hardware, hanging system, or any other mechanism required to make it functional. These signature installations to be made by specialized agencies having experience in making sculptures, set design, mannequins, wax models, artwork etc. The commissioned artist/execution agency on board for the installations to take necessary prior approvals from museum design consultant before execution. Please refer to the design presentation for further details. Qty. : 15nos. - Part 2 : Providing and fixing of M.S. stands with a plate shaped as per design of varying sizes from .15m x .15m to .60x .60m standing on a pole of approved thickness of height upto 1.2m. The pole to be finished in PU/duco finish of approved shade by the museum design consultant. The assembly should be structurally stable with neat joinery as per approved by the museum design consultant. Qty. : 15nos. Connecting bridges - Metal ramps- Providing and fixing of M.S./aluminium sheet ramp floor made of 50x50mm/ 75x75mm/ 100x100mm of core size min 4mm MS structure duly fixed on floor with 300x300x10mm plate fastened on the laid PCC.The top cover of the structure M.S. sheet 4mm thick anti slip dully welded with the structure. The height of the bridge to vary from ground level to 1200mm . The structure to be vetted by structural consultant keeping in mind the live load required. All Mild steel will be coated with steel primer, anti-rust coating, duco paint and all complete with all necessary hardware, equipment's and colour approved by museum Consultants. Ramp tentative size - 1200x 80000mm. Area : 96 sqm. - Glass ramp- Providing and fixing of glass ramp made of 15mm thick extra clear factory laminated glass double layered with 3m protection film, scratch free, extra clear film of thickness up to 0.4-2mm. The glass to be of customized sizes as per the curvature of the floor. The cost to include the ply for the mould/shape used to attain the desired shape. The ramp width to be up to 1500mm and raised height upto 1200mm from ground level. The framework in M.S./aluminium sheet ramp floor made of 50x50mm/ 75x75mm/ 100x100mm of core size min 4mm MS structure dully fixed on floor with 300x300x10mm plate fastened on the laid PCC. The structure to be vetted by structural consultant keeping in mind the live load required. All Mild steel will be coated with steel primer, anti-rust coating, duco paint and all complete with all necessary hardware, equipment's and colour approved by museum Consultants. Inclusive of all - fixtures, fittings, hardware, hanging system, or any other mechanism required to make it functional. Appropriate accoustic measures to be considered for sound proofing of the installation within the panelling and avoiding any echo/ reverberation of sound. Tentative length of the ramp : 16m. Area : 19.2 sqm. - Railings: Providing and fixing M.S. railing of varying height from 450mm to 900mm high, using 50X50mm/75x75mm of 2-4mm thick core M.S. section duly welded with the M.S. floor structure. M.S. to be paited with steel primer and finished in approved duco paint. The railing will have 10-12mm thick toughnened glass sandwiched in Hollow tube sections /channels with all necessary fittings, nut bolting, welding, grinding, silicon etc. to make it stable. The glass to have the edge with machine polished and bevelled as per design. At intervals as per design, provision for tablets to be made up to 4mm thick M.S sheets of width up to 450mm curved and bended in factory finish with corners and edges cut in CNC/laser with smooth finish. The stand to have provision for holding the tablets to be used by the visitors. Provision for electrical wiring and cabling to be considered via metal conduits through the hollow tubular sections. Tentative length : 106m. Area : 96 sqm. General note - The installation quality, mechanism and finish should conform to the International standards of museums. Artwork is to be designed by a special artist familiar with the craft and made by local/indigenous artisans/craftsmen with prior experience in the craft. The artist assigned should take all the necessary approvals from the museum design consultant. The installation is inclusive of all - fixtures, fittings, hardware, hanging system, or any other mechanism required to make it functional. Please refer to the design presentation for further details. The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation. All the items required to meet the intent of the installation shall be under the scope of the bidder/execution agency. Please note that the crafts defined in the installation are subject to be interchanged during the detail design stage. The installation should be complete in all respect with necessary approvals of museum design consultants and engineer -in-charge.

HSR [21.100.4]Making holes for HCL soil / Waste pipe by core cutting up to 200 mm thick slabs and sealing with Drip seal sealant complete in all respect. 4. 150 mm dia pipe

NS Kinectic mechanism - Linear Motion based unit using stepper motor With Encoder & Gearbox to move the wooden block updown 200mm fixed on table. Loop IN/OUT b/w the units and controlled via computer. Qty.: 350 nos. Make-Custom Controller - Controller for Kinetic Unit . Qty.: 117 nos. Make-Custom Projector - Supply of 1-chip DLP LASER Phosphor Multimedia Projection system having, 6700 Lumens 20000 hours lamp life, 1920 x 1200 WUXGA Native Resolution, Inbuilt blending and warping with automatic caliberation software, 3000000:1 Contrast Ratio, inputs: HDBaseT,HDMI2.0, DVI-D, Active 3D, Motorised zoom and focus, alongwith 0.65-0.75 lens & projector mountin bracket etc. complete with installation as per the site requirement. Qty.: 2 nos. Make- Christie,Barco,NEC, Digital Projection Media Server - Display media server/Workstation with 4K outputs as required , synced together. It should be capable of capturing content.Intel® i9 10th Gen, Rack Mountable workstation with 5 Year Onsite Warranty RAM- 32GB DDR4,SSD- 1TB(For WINDOWS BOOT), HDD: 2 TB , Nvidia Quadro GFX, 8GB, 3DP, Windows 10 Pro 64 Bi or higher config.It should also have genlock and framelock capability. Should also have Art-net Ethernet in/out. to complete the job with all respects. Qty.: 2 nos. Make-Dell/HP/ASUS Mapping Software - 3D Projection mapping software, Playback control System to manage, schedule and control the media severs. It should have direct control on inputs and media timelines. It should have an option of being controlled by an external unit integrated with the software. to complete the job with all respects. Qty.: 2 nos. Make- Dataton/Coolux/Pixera/Vioso/Equivalent Acessories - Transmitters- Recievers over CAT6 upoto 100 meter, CAT 6 cables,Connectors, Network Rack with acessories,Patch Panel network switch, and other accessories to required to make it fuctional Make-KRAMER/ATLONA/Dlink/Netrack/Comrack General note - The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary tech equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. - The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate technical socution for the same. All the items required to meet the techonological intent of the installation shall be under the scope of the bidder/execution agency.

NS Info Touchscreen Kiosk - 13" - Display : 13” FHD display with 10-point multi-touch functionality,Diagonal Size 13",Type Edge LED,Resolution 1920*1080 (Full HD),Pixel Pitch(mm) 0.153 x 0.153 Active Display Area(mm) 293.76 (H) x 165.24 (V),Brightness(Typ.) 300 (w/o Glass) nit,Contrast Ratio 600:1,Viewing Angle(H/V) 178/178,Response Time(G-to-G) 8ms(Typ.),Display Colors 16.7 M (real 6bit, dither 8bit),Color Gamut 45% Operation Hour 16/7,Haze 10%,Speaker Type,Built in Speaker(5W),Internal Player : Processor Cortex A72 1.7GHz Quad-Core CPU,Storage (FDM),8GB ,Operating System Tizen 4.0 (VDLinux),,inbuilt Processor : Cortex A72 1.7GHz Quad-Core CPU,with 5 year On site warranty. Make-Samsung/LG/Panasonic/Delta/eq

NS Acrylic solid surface Panelling - Providing and fixing of 6mm-12mm thk bendable acrylic solid surface of make Dupont/Samsung/ , installed on site with necessary hardware/framework/as per manufacture specifications and site conditions.Necessary finish materials to be considered, to make bendable acrylic solid surface abrasion resistant as per approval by Museum Design Consultant. as per conceptual design provided by Museum consultant. Make : Dupont/LG/Durlax

NS Bench - Type 1 - Providing and fixing of backless bench of size - 450mm Width X 450mm Height and 450 length as per the space requirement in Pre-casted in Terrazzo/Concrete as per design and instructed by museum Consultants. The casting in Terrazzo finish shall only be done using stone chips of khavada stone. Terrazzo finish to be seamless both on top and on the base as per the drawings. Inclusive of All grinding and finishing with necessary hardware. Sample bench to be approved by Museum Design Consultant. Terrazzo casted for bench to embed museum branding graphics while casting

NS SAFETY EQUIPMENT (Electrical & UPS Room only - : Rubber Mat suitable for 11KV & 1.1 K V system spread in front of the HT & L T Panel.

NS Wooden Batten False Ceiling - Providing and fixing of false ceiling of wooden block solid battens - made of teak wood as per existing site finish. Inclusive of all - fixtures, fittings, hardware, hanging system, electrical, mechanical or any other mechanism required to make it functional.

NS IP based PoE+ enabled Bi-Amplified loudspeaker/2-way loudspeaker with full compatibility with both Dante and open streaming standards such as AES67 and ST2110-30/can be achive through amplifier. Software allows to configure unlimited number zones, loudspeakers and audio channels, and includes device discovery, a versatile room EQ tool set, system organisation and status monitoring. With option of minimum 100RAL colors to be factory manufactured as per site requirement/can be achive through DSP. With Key technologies: Active Crossover, Directivity Control Waveguide, Inteliigent Signal Sensing, Minimum Diffraction Enclosure, Optimized Amplifiers, Protection Circuitry, Reflex Port Design, Room Response Compensation/can be achive through DSP. Frequency Response(-6dB):67 Hz -20 kHz/70 Hz - 23 kHz (-10 dB). Sensitivity: 87 dB SPL Peak SPL: 100dB or better Dispersion Angle: H x 100 Degree or better Harmonic Distortion: 0.5%/optional Power Output: Class D Biamplified Circuitary with 25W each for LF & HF/better power output Driver Size: Minimum 3"LF & 0.75" HF Metal Dome Should have minimum 1 x RJ45 for DANTE & PoE+/optional Analog Input on Euroblock connector Complete with Pan Tilt Wall mount bracket from same OEM Qty.: 22 nos. Make-Genlec / Devialet / Tannoy / Adam audio/JBL IP based PoE+ enabled Bi-Amplified loudspeaker/2-way loudspeaker with full compatibility with both Dante and open streaming standards such as AES67 and ST2110-30/can be achive through amplifier. Software allows to configure unlimited number zones, loudspeakers and audio channels, and includes device discovery, a versatile room EQ tool set, system organisation and status monitoring. With option of minimum 100RAL colors to be factory manufactured as per site requirement/can be achive through DSP With Key technologies: Active Crossover, Directivity Control Waveguide, Inteliigent Signal Sensing, Minimum Diffraction Enclosure, Optimized Amplifiers, Protection Circuitry, Reflex Port Design, Room Response Compensation/can be achive through DSP Frequency Response(-6dB): 55Hz-20kHz/70 Hz - 23 kHz (-10 dB) Sensitivity: 87 dB SPL Peak SPL: 100dB or better Dispersion Angle: H x 100 Degree or better Harmonic Distortion: 0.5%/optional Power Output: Class D Biamplified Circuitary with 25W each for LF & HF/better power output Driver Size: Minimum 3"LF & 0.75" HF Metal Dome Should have minimum 1 x RJ45 for DANTE & PoE+/optional Analog Input on Euroblock connector Complete with Pan Tilt Wall mount bracket from same OEM Qty.: 5 nos. Make-Genlec / Renkus Heinz / Devialet/JBL IP based PoE+ enabled Bi-Amplified loudspeaker/2-way loudspeaker with full compatibility with both Dante and open streaming standards such as AES67 and ST2110-30/can be achive through amplifier. Software allows to configure unlimited number zones, loudspeakers and audio channels, and includes device discovery, a versatile room EQ tool set, system organisation and status monitoring. With option of minimum 100RAL colors to be factory manufactured as per site requirement/can be achive through DSP With Key technologies: Active Crossover, Directivity Control Waveguide, Inteliigent Signal Sensing, Minimum Diffraction Enclosure, Optimized Amplifiers, Protection Circuitry, Reflex Port Design, Room Response Compensation/can be achive through DSP Frequency Response(-6dB): 45Hz-20kHz/37 Hz –18 kHz (-10 dB) Peak SPL: 104dB or more/better SPL 118dB Dispersion Angle: H x 120 Degree/Nominal Coverage Angle 110° H x 85° V, rotatable Harmonic Distortion: 0.5%/Optional Power Output: Class D Biamplified Circuitary with 50W each for LF & HF/better power output Driver Size: Minimum 5"" LF & 0.75"" HF Metal Dome Should have minimum 1 x RJ45 for DANTE &PoE+/Optional Analog Input on Euroblock connector Complete with Pan Tilt Wall mount bracket from same OEM Qty.: 3 nos. Make-Genlec / Renkus Heinz / Devialet/JBL Supply, Installation,Testing & Commissioning of Two-Way 6.5" Coaxial Ceiling Loudspeaker. Combined 70V/100V and low impedance direct operation, 50 Watts at 8O nominal setting, 30W multi-tap at 70V/100V, 62 Hz – 20 kHz bandwidth with wide 110° coverage, High 91 dB sensitivity for high maximum SPL. Make JBL Model CONTROL16/CT. QTY.: 10 nos. EXISITING* Make-JBL - Control 16C/T (EXISTING*) 4" 2-way Pendent Mount Speaker 1 x 4” LF Sensitivity: 88dB RMS Power : 25 W In-built transformer Tap : 100V / 70V upto 16W Maximum SPL : RMS - 107dB , Peak - 113dB Dispersion: 100 Degree or better Frequency Range (-10 dB) : 70 Hz-20 kHz. Qty.: 5 nos. Make-Tannoy / AtlasIED / Sonance / OWI / Bose/JBL Inwall speakers: Dual 6" In-Wall speaker/ single 6.5" Driver Size : 2 x 6.5” LF & 1 x 1" HF driver/ 1x 6.5" LF, 1 x 1" HF Nominal impedance: 8 Ohm Sensitivity : 92dB/88 dB SPL RMS Power : 80 Watts or better Maximum SPL : RMS - 111dB , Peak - 117dB Frequency Range (-10 dB) : 40 Hz - 20 kHz Enclosure : Baffle panel: moulded UV Resistant ABS Powder coated perforated steel grill- grill should be paintaible to match interior decor. Qty.: 7 nos. Make-Tannoy / Focal / Martin Logan / Defintive Technology / Bose/ JBL Driver Diameter - 40 mm or better/driver size 30mm Frequency Response: 15 - 20,000 Hz/16 - 28000 Maximum Input Power: 700 mW at 1 kHz/200mW Sensitivity: 96 dB or better Impedance: 47 ohms Cable: 3.0 m (9.8'), straight, left-side exit Magnet: Neodymium Voice Coil: Copper-clad aluminum wire Folding/collapsible: Yes/optional Accessories Included: 6.3 mm (1/4") snap-on adapter. Qty.: 9 nos. Make-Audio Technica / Bose / Focal / Beyerdynamic/AKG Headphone Aamplfier - 4 channel stero headphoen amplifier with maximum input level of upto +15dBU, 1/4" TRS connector, stereo input and output connectors. Qty.: 7 nos. Make-Behringer / Presonus / Art / Focusrite 4-Zone High Definition Acoustical sound masking System Integrated Analog Noise Generators Selectable Mic/Line Input for Paging or Recorded Messaging 3.5mm Stereo Summed Auxiliary Input for BGM Bluetooth® Streaming for Background Music Enhanced Privacy Mode with Optional Wired or Wireless Sign Preconfigured Sound Masking System Presets VOX Priority Muting for Paging and Background Audio Independent Level Controls per Zone for Mic/Line Aux and Bluetooth® All Inputs have EQ, Hi & Lo Pass Filters and Limit Independent EQ and Level Adjustment in Each Masking Zone Independent System Commissioning Ramping in Each Masking Zone Output Power : 4 x 30-Watts @ 70.7V/100V Output Impedance : 115O Signal to Noise Ratio 90dB Frequency Response : 50Hz - 15kHz Crosstalk : 69dB Power Comsumption : 560mA (Average, All Channels Driven) Display : 2x 24 Segment, Blue Illumination Protection Hi / Low Input Voltage, Thermal, Short, Over Current. Qty.: 2 nos. Make-AtlasIED / Cambridge Audio / Labgruppen / Logison Multi-purpose two way speakers - can be used as In-Ceiling, Wall / Surface Mount or Pendent Mount as per site requrements. Driver size: 2.25" 2-Way Frequency Range: 140Hz - 20kHz Dispersion: 130°, 2kHz Octave Band Sensitivity: 81.6dB (1W/1m) or better Maximum SPL (1m): 103 dB PeakPower Taps 70/100V - upto 8 watts. Can be connected to any 70V / 100V amplifier or the speakers can be connected using Cat5e cable. Each speaker features "in" and "out" Cat5e terminals making it easy to daisy chain speakers to the source unit. complete with Flange, Diffuser and Lens Kits./Input Connectors Removable locking 4-pin connector with screw-down terminals Qty.: 36 pairs Make-AtlasIED / Cambridge Audio / Tannoy / Sonanace/JBL 2.5 Sq mm Speaker Cable (as per actual) Qty.: 900m Make-Belden / Canare / Sommer / Proel 20/22 AWG Microphone/Signal Cable ( as per actual) Qty.: 450m Make-Belden / Canare / Sommer / Proel Control & Signal Shielded Twisted Pair Cable(as per actual) Qty.: 1645 nos. Make-Panduit / Commscope / Siemon Various Audio Connectors to complete the system Qty.: 1 lot Make-Neutrik / Switchkraft / Amphenol The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary audio equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate audio solution for the same. All the items required to meet the desired audio output of the installation shall be under the scope of the bidder/execution agency. The necessary approvals to be taken from the museum design consultant and engineer-in- charge before execution of works. *These items have been procured already. Cost of installation, integration , testing and commisioning to be considered for these.

HSR [23.22.1.10]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.10. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 125 to 160 amp, 25 KA

NS Canvas ceiling - Providing and fixing of canvas false ceiling as per the approval of museum design consultant. Inclusive of all - fixtures, fittings, hardware, hanging system, electrical,mechanical or any other mechanism required to make it functional.

HSR [5.7.1]Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 1. In mud mortar

HSR [5.23.2]Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 2. Nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix)

NS Gallery wall - The images of all the freedom fighter and the visitors of the museum will be displayed on the wall of the gallery in loop. The images of the visitors which are captured at different intervals in the museum will be reflected on the this wall as a part of the revolutionaries. The projection will be a grid like projection where each photo will appear for a duration of 30 seconds supported by details if required i.e. name, place of origin etc. At an instance approximately 50-100 images will appear on the wall at once. The treatment of the images will match the overall theme of the museum and the visual appeal as approved by the design consultant. The content to be developed as per the resolution of the screen.

NS M.S Steel artwork wall panelling - Providing and fixing of wall panelling up to ceiling height consisting of Steel / Metal frame work for support finished on top surface with 2-4mm thk M.S steel sheet with CNC cut Artwork and backed with 15 - 35mm thk Local stone/As per selection backing . Item Rate to include jointing and finishing of m.s sheet and stone to a flush finish with recommended framework/dry cladding system / clamping system all complete. . Rate to include framework/dry cladding system / clamping system required for panelling .

NS Wooden finished Partition - Providing and fixing of 1-4 mm thk teak veneer laminate paneling on top of existing wooden partition, duly polished with melamine/PU finish. Finished as per requirement. Inclusive of all - fixtures, fittings, hardware, hanging system, electrical, mechanical or any other mechanism required to make it functional.

NS SITC of Round swivel luminaire with 10W, and luminaire wattage not exceeding 12.5W in 3000k/4000K Color temperature CRI 90 with 355° internal rotation and max 30 tipping movement, designed to use LED lamps with C.o.B. technology with safety glass included. Version compatible with Ring Luminaire diam 170mm complete with device for coupling it to the luminaire and DALI control gear. The main swivel body is made of die-cast aluminium with a radiant surface that guarantees optimum heat dissipation. Metallised, thermoplastic, high definition reflector - medium optic (26°). Structure with die-cast aluminium external surface frame. The internal ring is made of thermoplastic available in a range of painted and metallised finishes. Make: ERCO/ iGuzzini Blade R/ Fagerhult (AOR No.RA-21)

NS Acrylic/vinyl backlit panelling - Providing and fixing of 6-12mm thick toughened and backlit Glass panels with laser cut paper and coloured acrylic sheet pasted behind , panel of size as per detail design. All detail as per design and approved by Museum design consultants. Inclusive of all - fixtures, fittings, hardware, hanging system, electrical, mechanical or any other mechanism required to make it functional as per the design, to achieve the effect of only text/graphic being lit up.

NS India backlit map - Providing and fixing backlit false floor upto 300mm height floor. The structure to be made of hydraulic adjustable jack with solic acrylic blocks duly fixed on the floor with necessary hardwares, nuts bolts etc all complete. Providing and fixing of the Ms framing of 50mmx50mm with thickness of upto 4mm in a grid pattern customised as per the design scheme duly welded to the base with base plate of desired size and thickness to be done if required and can be optional as per the satisfaction of engineer in charge. The cost is inclusive of toughened sandwich glass upto 30mm thk with extra clear 3M transparent protective film made in customised size as per appropriate grid design. Each panel to have reverse graphic/ ceremic printing/digital printing etc as per approval of museum design consultant. Each panel to be fixed in butt joint with fixing of glass with heavy duty silicone adhesive and the base to be fixed on MS framework with required adhesives as per the requirement. The rate is inclusive of providing acrylic sheets for housing the LED modules placed as per the requirement. Each tile illuminated by a powerful LED panel to be controlled with a centrally controlled DMX system as per the design scheme. The structure to be vetted by a structural engineer. Area : 80 sqm. Providing and fixing backlit wall made of upto 12-18mm thick toughened printed glass panels with extra clear 3M transparent protective film made in customised size as per appropriate grid design.. The structure to be made with solid acrylic blocks duly fixed on the wall with necessary hardwares, nuts bolts etc all complete. Ms framing of 25x25mm/ 50mmx50mm with thickness of upto 4mm in a grid pattern customised as per the design scheme duly welded to the base with base plate of desired size and thickness. Each panel to have reverse graphic/ ceremic printing/digital printing etc as per approval of museum design consultant. Each panel to be fixed in butt joint with fixing of glass with heavy duty silicone adhesive and the base to be fixed on MS framework with required adhesives as per the requirement. The rate is inclusive of providing acrylic sheets for housing the LED modules placed as per the requirement. Each tile illuminated by a powerful LED panel to be controlled with a centrally controlled DMX system as per the design scheme. The structure to be vetted by a structural engineer. Area : 72 sqm. General notes - The installation quality, mechanism and finish should conform to the International standards of museums. The installation is inclusive of all - fixtures, fittings, hardware, hanging system, or any other mechanism required to make it functional. Please refer to the design presentation for further details. The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation. All the items required to meet the intent of the installation shall be under the scope of the bidder/execution agency. The installation should be complete in all respect with necessary approvals of museum design consultants and engineer -in-charge.

HSR [23.2.3.2]COPPER WIRING WITH MODULAR SWITCHES IN MS CONDUITS (SURFACE/RECESS) 3.2. Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick MS conduit pipe, without separate control switch , Modular type Switch/sockets wiring Group B

NS Projector - Supply of 1-chip DLP LASER Phosphor Multimedia Projection system having, 6700 Lumens 20000 hours lamp life, 1920 x 1200 WUXGA Native Resolution, Inbuilt blending and warping with automatic caliberation software, 3000000:1 Contrast Ratio, inputs: HDBaseT,HDMI2.0, DVI-D, Active 3D, Motorised zoom and focus, alongwith 0.65-0.75 lens & projector mountin bracket etc. complete with installation as per the site requirement. Qty: 20 nos. Make- Christie,Barco,NEC, Digital Projection Media Server - Display media server/Workstation with 4K outputs as required , synced together. It should be capable of capturing content.Intel® i9 10th Gen, Rack Mountable workstation with 5 Year Onsite Warranty RAM- 32GB DDR4,SSD- 1TB(For WINDOWS BOOT), HDD: 2 TB , Nvidia Quadro GFX, 8GB, 3DP, Windows 10 Pro 64 Bi or higher config.It should also have genlock and framelock capability. Should also have Art-net Ethernet in/out. to complete the job with all respects. Qty: 7 nos. Make-Dell/HP/ASUS Mapping Software - 3D Projection mapping software, Playback control System to manage, schedule and control the media severs. It should have direct control on inputs and media timelines. It should have an option of being controlled by an external unit integrated with the software. to complete the job with all respects. Qty: 20 nos. Make- Dataton/Coolux/Pixera/Vioso/Equivalent Acessories - Transmitters- Recievers over CAT6 upoto 100 meter, CAT 6 cables,Connectors, Network Rack with acessories,Patch Panel network switch, and other accessories to required to make it fuctional. Make-KRAMER/ATLONA/Dlink/Netrack/Comrack Interactive Kit - Sensor Based Installation, Content triggered when visitor come in sensor area.Hokuyo UST-10LX. Qty: 4 nos. Make-Hokuyo UST-10LX General note - The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary tech equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. - The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate technical socution for the same. All the items required to meet the techonological intent of the installation shall be under the scope of the bidder/execution agency.

NS Souvenir Products Part3 - Designing, prototyping and developing 10 products of cost price Rs.180. The products are to be made with the narratives of 1857 freedom struggle of India museum which would be contemporary and tells a story to its users. The products in this price range could include totebags, bookmarks, stationary items etc. All concepts for the products to be presented to the Design Consultant / Department at all stages for approval, The stages include (1) Design concepts (2) Prototyping (3) Final sample. Prototypes of the selected designs te be vetted by the Design Consultant / Department.

HSR [23.23.6.4]MISCELLANEOUS 6.4. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 600 X 50 X 2 mm

HSR [23.22.2.2]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 2.2. MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings MCCB up to 250 A FP

HSR [24.2.8.6]LT CABLE 8.6. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 35 sqmm

NS Quiz application - Development of quiz application on the 1857 freedom struglle across India The application will have approximately 10 pages for which wireframing, user interface design, front end and back end coding of the user interface will need to be developed as per the approval of the design consultant. All necessary photoshoot and videoshoot to be included in the cost.The cost for any resources such as music composers, singers, artists, instrumentalists, sound engineers, recording studio charges,etc. required to be included in the cost.Related detail content identification to be done by the vendor. The content should have original music score. All user interface design, wireframing and user experience design and developement to be inclused in item rate. Complete UI/UX, 3D Modeling and Rendering also part of the application. App flow and UI/UX will be finalise after the approval of museum Consultants. User Experience should be easy and impactful.

HSR [23.2.5.2]COPPER WIRING WITH MODULAR SWITCHES IN MS CONDUITS (SURFACE/RECESS) 5.2. Wiring in MS conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required Group B

HSR [24.2.7.5]LT CABLE 7.5. Supply and erection of suitable compression type brass cable glands for underground Cable :- 120 sqmm to 185 sqmm Cable 3 to 32 Core

NS Android Tablets - WiFi Android Tablet (Android 12, Qualcomm Snapdragon, 27.94cm (11 Inches), 8GB RAM, 128GB ROM, with 5 year warranty. Qty: 10 Make-Samsung/Lenovo Or Eq AR Core Application - Custom AR Application Offline Mode : The application software to be developed in enterprise version / commercial version of the gaming engines (Unity3D, Unreal etc.) which supports real time 3d rendering and texture/ light baking. All the API Communication with any kind of server if need to be done in PHP/ MySQL as backend if needed. The developed application should have perpetual license and no subscription at any given point of time. Application/Software development cost to be inclusive of SRS, UI/UX, 2D design, 3D design or anything else needed to run the application. Application flow and UI/UX to be finalised once approved by the museum consultant/ authorities. Bidder will be responsible for submission of application source code technical documents and user manuals. All submitted documents to be digitally signed by the authorised signatory from the bidder Make-Custom General note - The quality, mechanism and finish of the work should conform to the International standards of museums. The installation is inclusive of all the neccessary tech equipmets, softwares, applications, accessories, special effects or any other mechanism required to make it functional. Please refer to the design presentation for further details. - The bidder/execution agency must refer to all the research, design and reference presentations and video links provided by the museum design consultants for understanding the concept, intent and quality of the installation to provide appropriate technical socution for the same. All the items required to meet the techonological intent of the installation shall be under the scope of the bidder/execution agency.

NS Museum Director - Operations & Management - Role and Responsibility: Managing the whole museum complex by coordinating with the Human resource appointed under him for operation & maintenance. They are also responsible for overseeing administrative,marketing and PR tasks and functioning of the Museum. The museum director is responsible for the daily operations of the museum as per the authority guidelines, for long-term planning, policies, any research conducted within the museum, and for the museum's fiscal health. He will overlook event management, exhibition planning and execution, strategy making for maximising museum reach, advertising, content creation and marketing. He will be responsible for setting up long term & short term museum targets and periodically evaluating the performance of the human recourses deployed at the museum. He will be responsibble for organizing training for the development for the workers on regular basis. Attend Authority meetings and get approvals on all expenditures and investments of the museum.Will be one and last point of contact to lead the over all musuem for indoors and outdoors as well. Experience: He should have minimum 10 years experience in managing museums/cultural centers/similar organsations - He should strategise on make museum run and get the maximum returns by ticket sales , rentals , our door concerts and exhibitions , indoor concerts , cafeteria and the shop - should manage of over all funds to be given to the governemt and strategise possible expenditures like housekeeping , promotional events to keep the musuem running . Qualification- Bachelors in Hotel Management/ Facility Management Masters in management/museum studies/relevant course.

NS Theatre Artists/Musician - Role and Responsibility: To act in different galleries as per design requirement of the experience. The cost should include the costume & make up of the actor. .The cost of direction by an appropriate and experianced director of the ushers should also be included in the same. the artits should be having a graduation degree from a renowned institute and should have an experience in the pretaining filed of atleast 2- 5 years Experience -should have an experiance of working in the software operation and management field for at least 5 years. -Should be learned in all the softwares used in the museum related to Mapping,projection,sound and integration. Qualification Graduates from a national/international acclaimed university as per the job requirement.

NS SITC of I / L - Connector Make: Bajaj/Philips, Litolux or equivalent. (AOR No.RA-42)

NS Wall mounted Artefact table (600x600mm) - Providing and Fixing of artefact table of size 600x600mm with base made of 50X50mm hollow sections of desired thickness with appropriate spacing and necessary welding at junctions including applying of required coats of steel primer on sections. The cost is inclusive of providing and fixing 12mm thk commercial ply of approved make on MS frame work with necessary hardwares,screws etc all complete. The top to be finished in 12 mm thk corian of approved make and shade fixed to the ply with silicone adhesives including buffing and polishing of the surface as per approved drawings. The corian top will be etched with artwork. The remianing area to be painted in duco of approved shade. a)Providing and fixing of display glass case of 8 M.M thick toughened glass of height 250mm on all four side fixed on 12mm-15mm thk aluminium channels and top placed of size as/specifications/design. The cost is inclusive of fixing of all edges with extra clear silicone with necessary fixtures and allen key locking arrangement (not to be visible on the face) b)Providing and fixing of 6 mm thick white lacquered glass on the top and all four sides of base to place the artefacts with edges bevelled at an angle on all edges as per approved detail drawings fixed to a ply base with extra clear silicone .

NS Projections with models/building depicting the scene of destruction /atrocities across india - The projection mapping inside and on the major monuments showcases the aftermath atmosphere of the freedom struggle and describes the post-war terror spread by the British occupation. The AV describes the details of the places/people and system that the British overtook after winning the battles in the different parts of the country. The atrocity scenes in details in the different area of India at important monuments, cities along with major leaders where major battles took place across india i.e the Kashmiri gate Battle in Delhi, the Lucknow residency in Awadh, Sati Ghat in Kanpur, Kali Paltan Mandir in Meerut, will highlight their iconic elements i.e. Jhansi ki rani's horse and nan Rao's elephant, North West Frontier Province, Rohilkhand, Gond region etc.. Projections of duration 1-2 minutes will be runningin loop inside replicas of different buildings/monuments showing a continuous stream of original images/footages taken by the British photographers post the battles, 1858 onwards along with clippings of newspapers published in different countries regarding the happenings in India. the content will be created in full HD resolution along with 2D/3D animation, motion graphics, illustrations as per the design consultant approval, along with required ambient sound.

NS Free Standing Corten Steel Information SignageWith Stone Backing & MS Framework) - Providing and fixing of Free Standing Corten Steel Information Signage consisting of Steel / Metal frame work for support with 25mm thk Khavada stone backing finished on top surface with 4mm thk corten steel sheet with CNC cut Artwork in 50% of the area of signage surface and backed with 25mm thk Khavada stone backing. Item Rate to include jointing and finishing of corten steel and Khavada stone to a flush finish with recommended framework/dry cladding system / clamping system all complete. Maximum Height Upto :4500mm. Rate to include framework/dry cladding system / clamping system required for paneling of both stone and corten steel paneling on concrete wall surface. Size - 1200mm X 1800mm