Pandit Lakhmi Chand State University Of Performing And Visual Arts Tender

AV Receiver for Multiformat Content playback Min. 7.1 Channel Full 4K Ultra HD A/V Receiver with Bluetooth and Wi-Fi. It should be able to integrate with supplied cinema processor (7.1 system) for audio and video with all required cable/connectors. Preferred Brand/Model :-MARANTZ/DENON/ PIONEER

Blue Ray Player Player should have capability to play all common audio/video formats(4k is must) from CD/DVD/USB drive with 5.1 / 7.1 audio out on optical/coaxial output. It should be able to integrate with supplied cinema processor (7.1 system) for audio and video with all required cable/connectors. Preferred Brand/Model :-OPPO/MARANTZ /DENON/ PIONEER

Cinema Screen- High Gain Standard perforated screen size of 35'.2"x 15' feet material, Screen gain should be min. 2.4 Preferred Brand/Model :-HARKNESS/ GALALITE

Cinema Screen Frame Platform for Cinema Screen L-C-R and Subwoofer Speakers Screen frame will be as per the requirement of screen size .All frame structure metal should be as per ISI standard. Speaker platform- Screen frame which includes running speaker platform with double 20 mm MDF double layer to be constructed behind screen for placing main speakers and subwoofers as per design parameters of modern cinema sound. Full Rubber padding is required under all speakers behind the screen with black curtain finishing around the screen. Preferred Brand/Model :- AS PER SPECS & WORKFLOW

Equipment Rack with accessories 42U & 36U System Rack for Equipment Installation. Complete with power indicator ,power sockets and isolators. Qty. (1+1) Preferred Brand/Model :-PRESIDENT/ VALRACK

Audio Equipment Rack with acesseries 42U System Rack for Equipment Installation. Complete with power indicator ,power sockets and isolators. Preferred Brand/Model :-PRESIDENT/ VALRACK

Cinema Grade Screen Loudspeaker System - Main speakers L-C-R 4 Way Quad/5 WAY-Amp Speakers System to be placed behind screen with following specs: Low Frequency (LF unit): minimum 15" LF drivers (min.two drivers) , Impedance not less than 4ohm . Minimum sensitivity 101dB or more, LF section must have power handling capacity of minimum 1600W AES Mid Freq: MF driver (min.two drivers each)with min. 700W AES each, power handling .Minimum sensitivity 101dB or more .Impedance not less than 4ohm . High/ Mid Freq: MF driver with min. 275W AES each, power handling .Minimum sensitivity 98dB or more .Impedance not less than 4ohm .High Freq (HF Unit): Minimum 80W AES power handling ,Impedance not less than 4ohm. Minimum sensitivity 110db or more. **All the L-C-R speakers power should be as per the F'FTV auditorium size/volume. Preferred Brand/Model :-QSC/JBL/PULZ

Maching Cinema Grade DSP based Amplifiers for 7.1 speakers system(L,C,R,LS,RS,BLS,BRS,SUB-WOOFER).Amplifiers with in built Crossover /or external crossover system Total Harmonic Distortion should not be more than 0.5% @20-20kHz(for LCR-MF/HF and PA ) and not more than 1.0% (for LCR-LF and Subwoofer) Nominal Frequency response : 20Hz to 20KHz (+- 0.2 dB) , Should have adequate headroom as per AES/ SMPTE norms. Total Quantity of amplifier will be depend on the 7.1 cinema speaker system (Quad L-C-R with Subwoofer/BLS/BRS/LS/RS) .Bidder will submit the total quantity and the brand with model no of the amplifiers for the complete system as per the actual requirement. For L-C-R=Total amplifier quantity 3+3 max, for sub-woofer= Total amp quantity 2 max , for surround= total amp quantity 9 max, back up for L/C/R =extra amp quantity 2. ** All speakers wiring should be individual to the amplifiers individual channel. For L-C-R, Low, Mid, High should be separate. For Surround speakers, each should be connected to separate individual channels of amplifiers. Qty. (3+3+2+9+2) Preferred Brand/Model :-CROWN/QSC/PULZ

2 x 18" High Power Floor Subwoofer 2 x18’’ low frequency driver having minimum sensitivity 100dB (1 watt 1 meter) and minimum rated power 2400W AES and impedance not lesser than 4 Ohms, Nominal Continuous rated SPL 130dB, Minimum frequency response 35Hz – 140Hz +-3dB.

Cinema Grade Surround Loudspeaker (6-6-6) Cinema surround speaker consisting of 10" or bigger low frequency driver and 1” or bigger HF driver having minimum sensitivity 95dB (1 watt 1 meter) and minimum rated power 350 AES or Higher and impedance not lesser than 4 Ohms. Minimum frequency response 35 Hz – 20KHz., Preferred Brand/Model :-JBL/QSC/ PULZ

Wall Mount Bracket for above Loudspeaker Wall Mount Bracket as per quoted surround speakers Preferred Brand/Model :-JBL/QSC/ PULZ

Loudspeaker System FOH/PA (Left / Right) : Ground stacking, Flying line array speakers with mounting accessories for stage should have following specs: LF/HF Frequency: LF 2x8”(min.) driver, HF 1x1.4”(minimum) driver. Impedance not less than 8 ohm .sensitivity 97.5dB 1W/1m, Maximum SPL 121.5 dB continuous, 127.5dB Peak. Power Rating should be minimum or greater than 1500W AES(per channel) (Left and Right). Frequency Response : should be equal or better than 109Hz-15kHz. Qty. (6+6) Preferred Brand/Model :-JBL/YAMAHA/DB Technologies/PULZ

Array Frame for suspending above Line Array Loudspeaker (Left/Right) Array Frame for suspending above Line Array Loudspeaker as per quoted model Preferred Brand/Model :-JBL/YAMAHA/DB Technologies/PULZ

Amplifier as per PA/Line array system PA system (Left/Right) .Bidder will submit the total quantity and the brand with model no of the amplifiers for the complete system as per the actual requirement. Maximum amplifier limit = 2, Needs adequate headroom. Qty. (2 Max) Preferred Brand/Model :-CROWN/YAMAHA/DB Technologies/PULZ

Wireless Handheld Microphone System Hand held transmitter receiver stand adapter rack mounted kit universal power supply AA size battery UHF antennas with all required accessories. RF Power output Minimum 30mW and 50mW (Max.) Preferred Brand/Model :-AKG/SENNHEISER/ SHURE

Wireless Lavalier Microphone System Body pack Transmitter, Receiver head-worn mic, lavalier mic, rack mounted kit with Universal power supply AA size battery UHF antennas belt clip with all required accessories. RF Power output Minimum 30mW and 50mW (Max.) Preferred Brand/Model :-AKG/SENNHEISER/ SHURE

Antenna Power Splitter Switching bandwidth (from/to)470 to 952 MHz Operating temperature range-10 to 50 Celsius Preferred Brand/Model :-AKG/SENNHEISER/ SHURE

Antenna cable - 20m length min Finish Black Preferred Brand/Model :-AKG/SENNHEISER/ SHURE

External Directional Wideband RF Antenna Switching bandwidth (from/to)470 to 952 MHz Antenna gain21.5 dBi Covering angle70 Grad Preferred Brand/Model :-AKG/SENNHEISER/ SHURE

Professional dynamic vocal microphone for lead and backing vocals delivers a powerful sound Audio frequency bandwidth70 - 20000 Hz Polar PatternSupercardioid Preferred Brand/Model :-AKG/SENNHEISER/ SHURE

Professional instrumental microphone with its solid all-metal body Polar PatternCardioid Audio frequency bandwidth50 - 20000 Hz Preferred Brand/Model :-AKG/SENNHEISER/ SHURE

Gooseneck Microphone with Base Unit Audio frequency bandwidth70 - 18000 Hz Equivalent noise level30 dB-A Signal to Noise64 dB-A Electrical impedance600 Ohms Recommended load impedance2000 Ohms TypeBalanced XLR Gender Male Contacts3-pin Preferred Brand/Model :-AKG/SENNHEISER/ SHURE

Reference Hanging Module with extension cable fly microphones from the ceiling to record music or speech in places of worship or conference rooms, or on theater stages. Reference hanging module microphone Length10 Diameter6 Preferred Brand/Model :-AKG/SENNHEISER/ SHURE/BEYERDYNAMIC

Reference Condenser Capsule - Hypercardioid Audio frequency bandwidth60 - 20000 Hz Equivalent noise level30 dB-A Sensitivity10 mV/Pa Signal to Noise64 dB-A Preferred Brand/Model :-AKG/SENNHEISER/ SHURE/BEYERDYNAMIC

Reference Phantom Power Module Audio frequency bandwidth20 - 20000 Hz Bass cut filter150 Hz Recommended load impedance2000 Ohms output TypeBalanced XLR GenderMale Contacts3-pin Preferred Brand/Model :-AKG/SENNHEISER/ SHURE/BEYERDYNAMIC

Boundary layer Microphone Audio frequency bandwidth50 - 20000 Hz Equivalent noise level22 dB-A Sensitivity22 mV/Pa Signal to Noise72 dB-A Preferred Brand/Model :-AKG/SENNHEISER/ SHURE/BEYERDYNAMIC

Active di Box Input 1 instrument/line/speaker level Input Connectors 1/4" jack Input Type Unbalanced, RF filtered Max Input +20dBu (0dB pad); +40dBu (20dB pad); +60dBu (40dB pad) Output (Thru) 1 parallel from input jack, 1/4" Unbalanced, RF filtered Output Connectors XLR male balanced Max Output 0dBu Frequency Response 20Hz to 20kHz, +/-2.5dB Noise -105dB unweighted, 22kHz BW THD 0.01%, 20Hz to 20kHz BW; 0.005%, 1kHz Preferred Brand/Model :-DBX/BEHRINGER/RADIL

Analog Mixing Console with accessories Type: Analog 24 x 8 x 2 Channels: Minimum 24 Computer Connectivity: USB Type B Inputs - Mic Preamps: 16 x XLR Phantom Power on all Mic Preamps: EQ Bands: 4-band Effects: Yes (like reverb,delay etc) Inputs - Line: 24 x TRS Inputs - Other: 1 x Stereo (RCA) Outputs - Main: 2 x XLR Outputs - Other: min. 5 x TRS (Aux), 4 x TRS (Subgroup), 1 x TRS (Footswitch) USB: Type Aux Sends: 5 x Pre/Post Busses/Groups: 8 x Aux Busses, 2 x Aux/FX Bus, 4 x Mono, 2 x Stereo Subgroups Headphones: 1 x 1/4" Preferred Brand/Model :-SOUNDCRAFT/YAMAHA/ALLEN & HEATH

Professional on-ear, closed studio headphones provide the highest possible noise insulation, perfect for live sound mixing. Headphone type closed-back Max. Input Power200 mW Audio frequency bandwidth Min.20 - 20000 Hz Sensitivity headphones107 dB SPL/V Rated Impedance55 Ohms Detachable cables Preferred Brand/Model :-AKG/SENNHEISER/ AUDIO TECHNICAL

Self Powered Control Room Monitor Loudspeaker (L/R) LF: Min. 5 inch low frequency loudspeaker HF: Min. 1 inch Polycarbonate dome tweeter FREQUENCY RANGE 40 Hz - 20 kHz AMPLIFIER POWER 100 Watts min. (total pair) Preferred Brand/Model :-JBL/YAMAHA/GENELEC

Wall Mount Bracket/stand for above Monitor Loudspeaker Mounting brackets/ stand as per quoted model Preferred Brand/Model :-JBL/YAMAHA/GENELEC

Chassis Based Digital Crossover Unit (Depend on the systems (7.1 and PA)) Digital Crossover System with speaker management. Software Configurable. Quantity of crossover will be depend on quad-amplified L-C-R speakers of 7.1 system.Bidder will submit the total quantity and the brand with model no of the Crossover for the complete system as per the actual requirement. Qty. ((Not Required if amps having In bult Crossover) Required quantity depends on brands & models Preferred Brand/Model :-BSS/CLEARONE/BIAMP/MARANI/QSC

4 Channel Mic/Line Level Analog Input Card with AEC 4 Channel Mic/Line Level Analog Input Card with AEC Preferred Brand/Model :-BSS/CLEARONE/BIAMP

4 Channel Mic/Line Level Analog Input Card 4 Channel Mic/Line Level Analog Input Card Preferred Brand/Model :-BSS/CLEARONE/BIAMP

4 Channel Line Level Analog Output Card 4 Channel Line Level Analog Output Card Preferred Brand/Model :-BSS/CLEARONE/BIAMP

Eight Channel Analog Output Expansion Unit Eight Channel Analog Output Expansion Unit Preferred Brand/Model :-BSS/CLEARONE/BIAMP

Network Based Device (PC, etc.) with all required accessories for controls Network Based Device (PC, etc.) with all required accessories for controls Preferred Brand/Model :-DELL/HP

Network Switch - as per site requirement Network Switch - as per site requirement Preferred Brand/Model :-NETGEAR/DLINK/CICSO

Advanced Feedback Suppressor Two-channel feedback suppressor has Preset modes for Speech, Speech/Music, and Music for optimized performance in any application Each filter can have a bandwidth as narrow as 1/80 of an octave Preferred Brand/Model :-DBX/CLEARONE/BIAMP

12" Self-Powered Stage Monitor Loudspeaker Self Powered 12”, two-way, bass-re ex 135 dB peak Frequency response: 60 Hz – 17 kHz Minimum 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input 20K Ohms (balanced), 10K Ohms (unbalanced) Highly e cient Class-D ampli er 1500W (750W x 2) 100V - 240V ~ 50/60 Hz Preferred Brand/Model :-JBL/MARTIN AUDIO/YAMAHA

2in 8 Out Line /Headphone Distrubation Amplifier 2in 8 Out Line /Headphone Distrubation Amplifier Preferred Brand/Model :-Behringer/Samson

Speakers wiring 6sq mm+ 4 sq mm FINOLEX/POLYCAB/HAVELLS OR ANY OTHER ISO CERTIFIED MAKE Preferred Brand/Model :-POLYCAB/FINOLEX/ HAVELS

2 Ton AC (Air-condition) system for Projectoin room with complete installation Should be 2 Ton Inverter Split AC,All installtion (like civil work,electrical work etc) should be done by the bidder. Preferred Brand/Model :-DAIKIN/HITACHI/CARRIER

One pair Two way walkie talkie, min range 400 mtr, long battery backup. It should be permissible in as per Indian Wireless Telegraphy Act. Preferred Brand/Model :-MOTOROLA

Supply, installation, commissioning & testing of whole work.All equipment should be supplied and installed properly. All the equipment must be installed by the dedicated certified engineer and all the installation material (like electrical,civil,carpentry,audio work, projection work etc.) should be provided be the bidder.