Get tender documents at just ₹200 per tenderKnow More
Search made simple for latest tendersNo hidden charges. No keyword restrictionsExplore Our Plansor Pay Per Tender

Municipal Council Bahadurgarh

Jhajjar, Haryana

  • Opening Date

    10 Sep 2019

  • Closing Date

    17 Sep 2019

  • Tender Amount

    ₹ 23,99,490

  • EMD

    ₹ 48,000

Summary

Providing And Installation Of Open Gym, Yoga Shed, Swings And Laying Of Grass In Aggarsain Park Ward No. 19

BOQ Items
ItemQuantityUnitsRateAmount
... more
Earth work in excavation in foundations, trenches, etc.in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres
20Cum -
... more
Cement Concrete 1:8:16 with stone aggregate 40mm nominal size in foundation and plinth.
4Cum -
... more
Providing and Supplying 2" G.I. Pipe
120Rmt. -
... more
Wrought iron and mild steel (using angles, flats, square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors open able or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position.
79Qtl. -
... more
Corrugated G.I. Sheet roofing 0.80 mm thick fist with G.I."J" or "L" hooks
151Sqm. -
... more
Brick-on-edge flooring laid in cement sand mortar 1:4 on 75 mm thick cement 1:8:16 and 100 mm sand filling and cement pointed 1:2 on top.
151Sqm. -
... more
Supplying M.S. Bolts of required sizes with nuts and washers complete
154Kg. -
... more
Applying priming coat with metal primer on new steel or iron work including preparation of surface. Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or matallic or plastered or concrete surfaces to give an even shade.
8Sqm. -
... more
First class brickwork laid in cement sand mortar 1:5 in first storey upto 4 meters above plinth level.
24Cum -
... more
12 mm thick cement plaster 1:5
18Sqm. -
... more
15 mm thick cement plaster 1:2 on the rough side of single or half brick wall
18Sqm. -
... more
Conglomerate floor 40 mm thick cement concrete topping 1:2:4
5Sqm. -
... more
Earth filling 08Km.
118Cum -
... more
C.C. 1:8:16 F/P
17Cum -
... more
Interlocking Paver Block M 35, 60 mm thick
33Sqm -
... more
Kota Stone Flooring
184Sqm -
... more
Precast Chequered Tiles Flooring. Precast chequered tiles of 20 mm thickness in ordinary grey cement without chips laid on 20 mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry between joints and over the base in floors, treads of steps and landings In case colour chequered tiles in flooring are used, increase the through rate of Item No. 14.45 by 10%.
220Sqm -
... more
Providing & Fixing imported Stainless steel grade 304 for fencing & Gate. (L.S)
500Kg. -
... more
CROSS TRAINER DIMENSIONS: - 1320mm (Length) x 600mm (Width) x 1750mm. (Height). SAFE AREA: - 1.77 x 1.2Mtr. Cross trainer equipment made from “B” Class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. The main frame Pipes are of 80NB “B” Class G.I. Pipe with single bend pipe with 250mm radius. The bottom support of M.S. round plate of Ø250 mm & 10mm thick. The Handle Frame is made up of 25NB “B” Class G.I. Pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 N “B” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 1.2 mm thickness and 20mm x 40mm CRC square pipes of 1.2mm thickness. To build structure bushes are used which are made from M.S.seamless pipe of 60mm OD. With 5 mm thickness. The footrests are made from Aluminum casting material of size 130 mm X 310mmX5mm thickness and mounted on M.S. Plate of Size 130mmx310mmx3mm thick Closing Caps are made up of high quality Fiber reinforced Plastic material. Pins used of Diameter 35mm, 25mm, and 17mm are made up from bright material. The Bearings used are of “6007” , “6205” and “6203” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts and bolts are used for assembly. The powder coating is done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 Micron thickness. A16 , A 24 mm circlips are used for assembly. Bolt M8X16 mm and Nylock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust.
1nos -
... more
Seated Puller DIMENSIONS: - 1900mm (Length) x 740mm (Width) x 1920mm. (Height). SAFE AREA:- 1.2Mtr x 3Mtr Seated puller equipment made up of “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters The center pipe is of 100NB made from “B” Class G.I. pipe. Bottom support is of M.S. round plate of Ø 250 mm & 10mm thickness is welded. All linkages are made up of 25NB “B” class G.I. pipe. The handle frame is of 32NB “B” class G.I. pipe. The seat frame is of 32NB “B” class G.I. pipe, To build structure bushes are used which are made from seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class. Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 1.2 mm thickness and 20mm x 40mm CRC square pipes of 2mm thickness. Foundation cover Closing Cap is made from FRP Material with 0.7 mm Thickness. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.Closing Caps are made up of high quality Fiber reinforced Plastic material. Pins used of Diameter 25mm and 17mm are made up from bright material. The bearings used are of “ 6205” and “6203” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts & bolts are used for assembly. The cerclips used for assembly are of A16. The powder coating done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 micron thickness.
1nos -
... more
SKY WALKER DIMENSIONS: - 1720mm (Length) x 630mm (Width) x 1750mm.(Height) SAFE AREA: - 2.7Mtr x 1.6Mtr. Sky Walker Equipment made from “B” class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. The main frame pipe is of 80mm NB made from “B” Class G.I. Material which is bend at the radius of 250mm. The leg movement frame is of 50 x 50mm x 3mm thick CRC square pipe. Sleeves are made up of 100 mm OD M.S. pipe with thickness 5mm. This results in easy replacement of bearings, pins and handle. The handle frame is of 25mm NB made from “B” Class G.I. pipe.The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class. Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Two foundations are provided for rigid support. The footrests made from Aluminum casting material of size 130 X 310 X 5mm. Closing Caps are made up of high quality Fiber reinforced Plastic material. The pins used are made up of Ø 25mm bright material. Pins are fixed at the outer end with M8 grub screws and Dia.8mm SS ball. The bearings used are “6205zz” are permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts & bolts are used for assembly. The cerclips used for assembly are of A24 type. The powder coating is done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness.
1nos -
... more
SIT UP BOARD DOUBLE DIMENSIONS: - 1760mm (Length) x 1140mm (Width) x 660mm (Height). SAFE WORKOUT AREA: - 2500mm (Length) x 1600mm (Width). The Sit up Board double made from “B” Class GI pipe. Center column made from 100mm NB “B” class G.I. Pipe. The main frame is of 25mm NB made from “B” Class GI pipe. FRP sheet of 3mm thickness is molded on main frame.The remaining frame of the sit up board is of 32mm NB made from “B” class GI pipe. The powder coating is done with Pure Polyester powder Ackzonoble or Berger Paints with 60 to 70 micron thickness. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.
1nos -
... more
CHEST PRESS DIMENSIONS: - 2000mm (Length) x 710mm (Width) x 2150mm. (Height). SAFE AREA: - 3.0Mtr x 1.7Mtr. Chest press equipment made up of “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters The center pipe is of 100NB made up of “B” Class G.I. pipe. The bottom welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The connecting pipes are made up from 25NB “B” class G.I. pipe. The handle frame is made up from 32NB “B” class G.I. pipe. To build structure bushes are used which are made from MS seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. Closing Caps are made up of high quality Fiber reinforced Plastic material. Foundation cover Closing Cap is made from FRP Material with 0.7 thickness. Pins used of Diameter 25mm and 17mm are made up from bright material. Bolt M8X16 mm and Nylock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust. The bearings used are of “6205zz” & “6203zz” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts & bolts are used for assembly.The cerclips used for locking is made up of A24 mm & A16mm. The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness.
1nos -
... more
SEATING & STANDING TWISTER DIMENSIONS: - 1700mm (Length) x 540mm (Width) x 1250mm. (Height). SAFE AREA: - 3 Mtr x 1Mtr. Seating & Standing Twister equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters The Center Pipe is of 100mm NB made from “B” Class G.I. Round Pipe. The M.S. round plate of Ø250 mm & 10mm thickness is welded at bottom Handle sleeve pipe of 125mm OD with thickness 5mm provided for easy assembly, replacement and maintenance. The bottom frame of the Seating & Standing twister is of 32 NB, 50 NB, and 25 NB made from “B” class G.I. pipe. The handle frame of Seating & Standing twister is 25 NB & Foot resting frame of seating side is made from “B” class G.I. pipe of 25mm NB. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class, Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRCA square pipes of 3mm thickness. The Twister plate fitted on the bottom frame is made up of M.S. Round Plate of size 300mm diameter and 10mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. The Pins used are made up of Ø 35 mm bright material. The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts & bolts are used for assembly. The powder coating is done by Pure Polyester powder of Berger Paint with 60 to 70 micron thickness.
1nos -
... more
SHOULDER BUILDER DIMENSIONS: - 900mm (Length) x 900mm (Width) x 1580mm (Height). Safe Area:- 1.9Mtr X 1.9Mtr Shoulder Builder Equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeter. The Center Pipe is of 100mmNB made from “B” Class G.I. pipe, and the bottom support of M.S. Round plate of 250 mm diameter & 10mm thickness. The handle movement frame is of 25mm NB made from “B” Class G.I. pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80mm NB”B”or “B” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angle of 1.2 mm thickness and 20mm x 40mm CRC square pipe of 1.2mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. The pins used are made up of Ø 25 mm of bright material. The bearing used is “6201zz” & “6205zz” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nut bolts are used for assembly. The cerclips used for assembly is of A 24. The nylon bush is used for handle knob.The powder coating done with Pure Polyester powder of Ackzonoble or Berger Paints with 60 to70 micron thick.
1nos -
... more
HORSE RIDER DIMENSIONS: - 1180mm (Length) x 400mm (Width) x 1400mm. (Height). SAFE AREA: - 2.2Mtr x 1.4Mtr. Horse rider equipment made from “B” class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. The main frame of 100NB made from “B” Class G.I. pipes welded with M.S. round plate of Ø250 mm & 10mm thick Seat provided are made up of MS deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20mm. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 1.2 mm thickness and 20mm x 40mm CRC square pipes of 1.2mm thickness. The leg movement frame is of 32NB made from “B” G.I. pipe. The handle frame is of 32 NB made from “B” Class G.I. pipe. The footrests are made from 25 NB “B” class G.I. pipe. Pins used of Diameter 17 mm are made up from bright material. The bearings used are “6203 ZZ” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts & bolts are used for assembly. The circlips used for assembly are of A24 mm. The powder coating done with Pure Polyester powders of Ackzonoble or Berger with 60 to 70 micron thickness.
1nos -
... more
DOME CLIMBER – Dome climber is made up 20mm IDGI pipe of different nos. of pipes of different length namely 12 nos of 42”, 48nos. of 33”, 12 nos. of 37”, 12 nos. of 30”, 18 nos. of 36”, 6 nos. of 28”, 3 nos. of 24” 6 nos. of 32” and 3 nos. of 25” length. The dia of dome should not be less than 12ft and 6ft ht from ground level. All welded joints are well grinded, All parts to be treated chemically and treated with the pure polyester powder coating (oven baked) with minimum thickness of 40 microns done on the pipes extend the life of equipments.all installed in C.C. base as per order by engineer in charge.
1nos -
... more
FRP Two lane slide Platform of minimum size 1.2 mtr. X 0.75 mtr. and 1.8 mtr. high supported by four numbers of minimum 50 mm IDGI pipe made ,2.5 mm thick special perforated MS sheet duly supported underneath by angles of size 40 X 40 X 4 mm. Platform should be supported by railing made of 25 mm and 20 mm IDGI pipe horizontal as well as vertical members respectively. The vertical member should be at least 0.75 mtr. high and spaced at distance not more than 100 mm. b) Length and overall width of Slide should not be less than 3.3 mtr. and 1.0 mtr. respectively There is 2 nos. of joint less FRP Slide made of minimum 6 mm thick overall ISO GEL with uv stabilized pigment mixed in gel coat with virgin quality 450 grams matt and G.P. resin duly supported by one number support made up of 25 mm IDGI pipe both side finish, connected with platform. Slide should be made in a single mould piece there is no any joint in the slide. c) Leg support of the platform should be made by 4 numbers of 50 mm IDGI pipe) Two numbers of Ladder each having width of minimum 50 cm should be made by two numbers of 32mm IDGI pipe having step of minimum size 100 mm tread and maximum 175 mm riser duly supported by 20mm IDGI pipe made of 16 SWG GI Sheet jointed with triangular steps. e) The ladders railing should be made up of 25mm and 20 mm IDGI pipe horizontal as well as vertical members respectively. The vertical member should be spaced as per requirement and safety in such a way that a ladder itself has safety railings for the platform. f) All the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. g) All parts to be treated chemically and treated with the pure polyester powder coating (oven baked) with minimum thickness of 40 microns done on the pipes extend the life of equipments. To be installed in C.C. base as per order by engineer in charge.
1nos -
... more
Arch Swing:- made up of GI pipe 65mm N.B . The Arch swing shall have two numbers of inverted “U” shaped M.S pipe of 65mm N.B. with 7’-6” height above natural ground level at 10 feet center to center all overall size of the Arch. Swing shall be 10’ht 7’-6” (ht. Above GL) The vertical inverted “U” shaped member shall be connected with gi pipe of 65mm N.B.at top as per drawing/design. shall be powder coated , consisting of 4 Nos. belt type swing with bearing assembling chain Zinc coated 6mm thick, butt welded , Belt seat made of frp with non skid surface . The swing shall be fixed in CC as per direction and to the entire satisfaction of Engineer in charge.
1nos -
... more
Providing and fixing spiral slide (Roto molded):- Roto molded spiral slides is in one piece rotationally molded is made of L.L.D.P.E. and has a double layer (both side finish) having thickness of 4mm. resting on vertical poles of 80mm nominal bore, G.I. pipe ttached to platform with the help of 2 no.'s 50mm NB GI pipe on height of 2400mm, platform made of 2mm thick precision punched hole GI sheet and railing to platform made of 25mm & 20mm nominal bore G.I pipe, Entry Ladder made of 25mm & railing of ladder is made up of 25 mm nominal bore GI pipes and jointed with help of 16 swg GI sheet triangular steps having width 500mm, 90mm tread & maximum 225mm riser. All parts to be powder coated with minimum thickness of 40 microns uniformly and then fixed in cement concrete blocks of required size and mix etc complete as per drawing / sketch and direction of Engineer –in-charge at the site. (a) Deck height –2400mm.
1nos -
... more
The lever of see saw shall be made from 80 mm NB ‘ GI pipe. The seat of see saw shall be made from FRP (Fiber Reinforced Plastic) / LLDPE (Low linear Density Poly Ethylene) 2 -3 thickness. The lever shall be fitted on 50 mm GI pipe and bush bearing shall be made from seamless pipe fitted in 80 mm NB GI pipe. See saw lever shall be welded with 150 x 150 x 5 mm MS plate for nut bolting with stand. All parts to be powder coated with minimum thickness of 40 microns uniformly and then fixed in cement concrete blocks of required size and mix etc complete as per drawing / sketch and direction of Engineer –in-charge at the site.
1nos -
... more
Providing & Laying of Grass Carpet complete in all respects.
1400Sqm -
... more
Design, Manufactue, Providing & Fixing of all in one Solar Street Light 15W with Luthium Ferro Phosphate Battery & 75mm Dia GI 6Mtr. Long Pole with 5 year Warranty of Complete system in different Location in Municipal Council Bahadurgarh.
10Nos. -

MUNICIPAL COUNCIL BAHADURGARH 1 | P a g e DETAIL NOTICE INVITING E-TENDERS SINGLE PERCENTAGE / ITEM RATE SHORT TERM ONLINE TENDER Municipal Council Bahadurgarh hereby invites Online bids on the website: : https://etenders.hry.nic.in from the eligible contractors/firms enlisted in appropriate class/category on the approved list of Municipal Council Bahadurgarh, PWD B&R, CPWD, ULB Haryana & irrigtion and water resources, Marketing Board for the works as mentioned below:- Sr. No. JOB No. Name of Work Estimated Cost (Rs in Lacs.) Bid Document Fee Processin g Fee+GST EMD (Rs.) 2% of Estimated Cost Tender to be opened on Date & Time Time limit for completion of wok 1 997 Providing & fixing of Open gym in ward no. 4 Bahadurgarh 1643125 1000 1180 33000 18/09/2019 2 Months 2 998 Const. of IPB Street from House of Lalit to Jaibhagwan House & Its approaches in ward no. 10 2383455 1000 1180 48000 18/09/2019 2 Months 3 999 Const. of IPB Street from Raju to ram singh, sandeep to Raju plumber ravi chairman & Its approaches in Ward no. 10, Bahadurgarh City. 2484788 1000 1180 50000 18/09/2019 2 Months 4 1000 Const. of IPb street masjid wali Gali, Khilan Wali Gali, Pappu Garments & Sonu Wali Gali in ward no. 10, Bahadurgarh City. 1381321 1000 1180 28000 18/09/2019 2 Months 5 1001 Const. of IPB Street from Munna Lal Wali, Sanjay wali, Deepak Wali, Manan khan Wali & Ahok Wali Gali in Ward no. 10, Bahadurgarh City. 1895930 1000 1180 38000 18/09/2019 2 Months 6 1002 Const. of IPb street from biresh home to Anand house, Lilu office to Mungeshpur drain, Mahesh to Udaykant, Gupta Garments wali Gali & Its approaches in ward no. 10, Bahadurgarh City 2428273 1000 1180 49000 18/09/2019 2 Months 7 1003 Providing and Fixing of all in one solar light with ferro phosphate battery 5 year warranty of complete system in ward no. 11 459375 1000 1180 95000 18/09/2019 2 Months 8 1004 Const. of IPB Street from House of Indu to house of Kalim Farukh and upto house of Rajni in Ward no. 11 Bahadurgarh 2485359 1000 1180 50000 18/09/2019 2 Months 9 1005 Const. of IPB Street from Amit Office to Satish and house of Lalbachan to house Dalip & Sanjay to Manoj Chaurasiya in Ward no. 11 Bahadurgarh 2443622 1000 1180 49000 18/09/2019 2 Months 10 1006 Const. of IPB Street from House of Bablu to Ramesh and Chitlal Mor to Bangali Rekha and house of Rajkumar in Ward no. 11 2482264 1000 1180 50000 18/09/2019 2 Months 11 1007 Const. of IPB Street from House of Immamudin to Anil Shukla and Munna to Ram Murt in Ward no. 11 Bahadurgarh 2485359 1000 1180 50000 18/09/2019 2 Months 12 1008 Providing & installation of 9mtr High Mast Light At Varius Place in Ward no. 14 947632 1000 1180 19000 18/09/2019 2 Months 13 1009 Providing & fixing of Swings and Benches in ward no. 14 Bahadurgarh City 973500 1000 1180 19500 18/09/2019 2 Months 14 1010 Const. of demage Pulia jall, Demage drain & other repair works in ward no. 23 2459566 1000 1180 50000 18/09/2019 2 Months 15 1011 Providing & Fixing SFRC tree Guards in Ward no. 14, Bahadurgarh City. 990000 1000 1180 20000 18/09/2019 2 Months 16 1012 Spl repair with (Mastic Provision) from Narbir House to Bittoo Rathi and tinoo Rathi to Pahalwan house & Its approach Street in ward no. 14 2431550 1000 1180 49000 18/09/2019 2 Months 17 1015 Const. of Various C.C. Street in Ramnagar & C.C Steet from Rohtak road to Anil Sharma Plot & Its approaches. 2463121 1000 1180 49500 18/09/2019 2 Months 18 1016 Const. of C.C. Street Ramkishan Dalal Wali in Ward no. 18 878199 1000 1180 18000 18/09/2019 2 Months MUNICIPAL COUNCIL BAHADURGARH 2 | P a g e 19 1017 Providing & Fixing of Speed Breaker & Precast R.C. C Benches in ward no. 18 660000 1000 1180 13500 18/09/2019 2 Months 20 1018 Providing & installation of 9mtr High Mast Light in Auto Market, near Ashok Rathi Plot at Naresh Hudda chowk in Ward no. 18 97585

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.