Haryana Urban Development Authority Tender
... More
The HUDA has issued a formal invitation for competitive bids for the Haryana Urban Development Authority project, for Const Of Office Building Of The Chairman Haryana Real Estate Appellate Tribunal Karnal In Sector 12 I Karnal Bays Site No 3 4 in Karnal, Haryana, with an estimated contract value of Rs. 4,98,50,193. The bid opening date for this tender is 27-07-2022 and the last date for bid submission is 16-08-2022. Interested bidders for Haryana Urban Development Authority tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Costs
EMD
₹ 10,30,800Document Cost
₹ 3,000Tender Fee
₹ 1,180
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_HBC_232138_1Bid Award Id
ViewTender No
JOB NO 188Tender Authority
Haryana Urban Development Authority ViewPurchaser Address
-Website
http://https://www.hsvphry.org.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and fixing on wall face unplasticised Rigid PVC moulded fittings/accessories for unplasticised Rigid PVC Rain Water pipes conforming to IS 13592 Type-A, including jointing with seal ring conforming to IS 5382, leaving 10mm gap for thermal expansion, 5.2) Bend 87.50-110mm bend. (As per Drawing)
10
-
104
... More
Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1 :2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/cement concrete topping, 50mm thick: with 455mmx455mm/ 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per 1.5.1. specification painted with 3 coats of black bitumastic superior paint complete as per standard design.
1) Size 450 mm X450 mm inside (with 455mmx455mm cover and frame light duty single seal weighing 20 kg with C.C. topping
6
-
3905
... More
Providing and laying matt finished vitrified tile of size 300x300x9.8mm having sqm 249 834 1082 with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1 :4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
157
-
1082
... More
Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. 23.22.4.8:- TPN DB Horizontal type Double Door 12 way ( 8 incoming 3phase*12 outgoing)
8
-
6445
... More
Providing and fixing skirting with Pre-laminated medium density fibre board exterior grade (Grade-I) conforming to IS: 14587:1998 marked, with (one side decorative and other side balancing lamination and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. all complete.
2) 25 mm thick
20
-
2032
... More
Providing and fixing granite stone in all shades 15mm to 18mm thick in sqm skirting /dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of Granite including labour for fixing cramps pins and dowels etc.
191
-
2838
... More
Prov. and fixing nitrile fubber insulation on coldo/hot water pipes installed on terrace complete with outer mechanical protection as per specification-15mm dia (9mm thickness)
30
-
185
... More
Supply, Installation, Testing and Commissioning of Electric driven pressurisation pump suitable for automatic operation and consisting of following complete in all respect as per required: (Jockey Pump)
(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS-1520.
(b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 Volts, 3 Phase 50 Hz AC supply with IP-55 protection for enclosure, horizontal foot mounted type with Class-’F’ insulation, conforming to IS-325.
(c) MS fabricated common base plate, coupling, guard, foundation bolts etc. as required.
(d) Suitable cement concrete foundation duly plastered with anti vibration pads.
1
-
126235
... More
Supply and erection of PVC CONDUIT ISi marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work.
23.7.6.4:- PVC pipe of 40 mm dia.
200
-
64
... More
Supply, Installation, Testing and Commissioning of loop isolation module complete as required.
Make:- Firelite/Morley/Apollo/GST/Copper /Bosch
25
-
6770
... More
Preparation of ply wood surface for painting including sand papering the surface and applying filling with proved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete.
95
-
41
... More
Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling, including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required Group B
90
-
1282
... More
Supply, Installation, Testing and Commissioning of copper wound voltage stabilizer suitable for 1.5 / 2.0 ton split type A.C. including its necessary connection with A.C. including the cost of petty material required to complete the job complete in all respect upto the entire satisfaction of Engineer-in-Charge Make: Packard/ Total line/ Deol 5 KVA Voltage Stabilizer.
20
-
3370
... More
Supply and Erection of Heavy duty Exhaust Fan 12” dia 1400 RPM of Bajaj / Crompton make complete in all respect upto the entire satisfaction of Engineer-In-Charge.
12
-
2600
... More
Water Treatment Plant
Sub Head-I Pump Room & Water Treatment Plant
Domestic Water Transfer Pump
No of pump set: 1 Set, each set with two working pump (1 Set Working & 1 Set Stand by)
Water Flow Rate: 210 LPM
Head: 30 M
Location: Plumbing Plant Room
Maximum Motor Rating: 8.0 HP
1
-
349965
... More
150 mm dia
4
-
9112
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal make instantaneous inlet couplings complete with cap and chain as required for suitable dia MS pipe connection conforming to IS-904 as required & as per tender specification. (Make-Newage, Minimax, Spago)
2 Way-100mm dia MS Pipe
1
-
6048
... More
Providing & fixing 25 mm x 5 mm Copper strip in 40 mm dia G.I. pipe from earth electrode as required
70
-
818
... More
Supply and Fabrication of G.I. Flat size 50x6mm as per relevant IS specification alongwith painting and priming coat upto the entire satisfaction of Engineer-in-Charge.
40
-
135
... More
Brick work with common burnt clay non modular bricks of class designation 7.5 in foundation and plinth in: 2) Cement mortar 1:6 (1 cement: 6 coarse sand)
75
-
3955
... More
Centering and shuttering including strutting, propping etc. and removal of form for: 5) Lintels, beams, plinth beams, griders, bressumers and cantilevers. (As per Drawing)
1060
-
332
... More
Providing and fixing vitreous chinaware dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:
1) White vitreous chinaware dual purpose WC pan with white solid each 1319 5970 7289 plastic seat and lid with white vitreous chinaware flushing cistern and C.P. flush bend.
6
-
7289
... More
S/E of 1 Mtr Patch Cord complete in all respect upto entire satisfaction.
Specifications
Conductor 24 AWG, Multi-strands
Conductor Metal Bare Copper
Insulation Material High Density Polyethylene Material PVC I, 94V-0
Color Code Cool Grey 5C
Heat Resistance 60C minimum (Temperature limited)
Flame Property The purpose of the vertical flame test is to screen out flammable wires, it follows the VW-1 (UL) and FT-1 (CSA) standards.
Insertion Cycles 750 times
1 Meter Long CAT 6 work with all types of computers. Make D-Link AMP LAPP
50
-
220
... More
Providing and fixing partitions for different type of urinals.
1.1) Small size 680mm x 330 mm-White
20
-
1059
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross 'T' of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to fonn grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main 'T' runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer in-charge.
1) 8 mm thick fully perforated calcium silicate board made with sqm Calcareous & Siliceous materials reinforced with cellulose fibre manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/sq. cm, bending strength 100 kg/sq. cm, of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.85, with 50 mm thick rock wool of 48 kg /cum backing.
204.46
-
1418
... More
40 amp to 63 amp. MCB's FOUR POLE
20
-
1446
... More
Supply, Installation, Testing and Commissioning of Electric driven main fire pump suitable for automatic operation and consisting of following complete in all respect as per required: (Diesel Driven Pump)
(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS-1520.
(b) Suitable HP, 1500 RPM, water radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 M outside pump house duly insulated with 50mm thick glass wool with 1.0mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop sloanoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as require.
(c) MS fabricated common base plate, coupling, guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads.
1
-
683155
... More
Supply, Installation, Testing and Commissioning of single input monitor module complete as required.
Make:- Firelite/Morley/Apollo/GST/ Copper/Bosch
1
-
6550
... More
Supply & erection of G.O. Switches with 9 Nos. Post Insulators of Jay Shree Make Conforming to ISS: 1818/1972 and ISS:2544/1963 with latest amendments complete in all respect and erection of the same upto the entire satisfaction of Engineer-In-Charge.
1
-
10000
... More
S/E of 11 KV G.I. Pins (long) for H.T. line (Conforming to ISS 2486 (Part-I & II) with latest amendments complete in all respect & erection of the same upto the entire satisfaction of Engineer-In-Charge.
6
-
66
... More
10cm thick (average) mud phaska of demped brick earth on roofs laid of slope consolidated and plastered with 25mm thick mud mortar with bhusa @ 35 Kg per cum of earth and gobri leaping with mix 1:1 (1 Clay: Cow-dung) and covered with machine molded tile bricks, grouted with cement mortar 1:3 (1 Cement: 3 Fine Sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat.
1) With common burnt clay non modular brick tile of class designation 10. (As per Drawing)
450
-
547
... More
Supply/ erection of 11 KV Lightening Arrestor (Conforming to ISS: 3070/ 1985) with latest amendments complete in respect and erection of the same upto the entire satisfaction of the Engineer-In-Charge.
1
-
5020
... More
Providing & Fixing of Information Socket complete in all respect upto the entire satisfaction of Engineer-in-Charge.
Make: Legrand /Norsys/ Schneider
150
-
615
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 3) 32 mm nominal bore.
3
-
543
... More
80mm dia.
90
-
1779
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6.1.4 1:3:6 (1 Cement : 3 coarse sand (zone-Ill) : 6 graded cum stone aggregate 20 mm nominal size)
125
-
3260
... More
Centering and shuttering including strutting, propping etc. and removal of form for: 6) Columns, pillars, piers, abutments, posts and struts. (As per Drawing)
655
-
293
... More
Providing and fixing in position best Indian make (to the approval of the engineer-in-charge) storage type automatic electric water heater, pressure/non-pressure type thermostatically controlled, suitable for operation on 230 volts, 50 cycles single phase vertical wall mounting fitted with-draw able and adjustable type AC, thermostat. Thermostat knob to be readily accessible through the opening of suitable cover for and adjustment of temperature in the installed position of heater and the thermostat should be withdrawn without having to drain the water, electric heating element made out of copper tube (heating element should be easily removed and replaced in the installed position of heater) A neon indicator 1 AMP, inner container made out of copper tinned both from inside and outside, outer container made out of mild steel sheet finished in gleaming white stove enamel paint, insulated between the inner and outer with fibre glass wool with 1 meter length of suitable capacity 3 core flexible cord with plug and non return valve plastic/lead connections or pressure release valve (where required). Complete including fixing and testing for a week (as required by Engineer-in-charge. 1) 25 Liters capacity
6
-
9055
... More
Supply and Erection of PVC conduit pipe ISI marked (medium) recessed in all/ceiling etc. including cost of PVC bends. Inspection box and all other material other mat required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge. PVC pipe of 25 mm dia.
3000
-
36
... More
12mm cement plaster finished with a floating coat of neat cement of mix.
1) 1:3 (1 Cement : 3 Fine sand) (As per Drawing)
540
-
137
... More
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentring, at all levels, over a height of 3.5m, for every additional height of 1m or part thereof (Plan area to be measured): 1) Suspended floors, roofs, landings, beams and balconies (Plan area to be measured). (As per Drawing)
3720
-
164
... More
Acoustic Insulation: Acoustic insulation with Minera wool of 50mm thickness and 48Kg/Cum density packed in hessian cloth within the gap between panels and the wall.
940
-
334
... More
Supply, Erection of LT aluminum cable standard compact circuler aluminum contactor screened with extruded semiconducting compoured XLPE insulated insulation screened with extrude semi conducting compound in combination with copper tape (0.3KA for 1 sec) cores laid up inner sheathed (ST-2 PVC) galvanized steel strip armoured and over PVC sheathed (ST-2 PVC) black cable confirming to IS 7098 (Part-I) 1988 with latest amendments and erection of the same loose in existing pipe or trenches or loose compete with necessary connections complete in all respect up to the entire satisfaction of Engineer in charge 150 Sqmm 4 core Armoured Make: Havells/Universal/ICL/INCAB/CIRTINA
100
-
690
... More
Supply, Installation, Testing and Commissioning of intelligent analog addressable photo thermal detector complete with mounting base complete as required. Make:- Firelite/Morley/Apollo/GST /Copper/Bosch
50
-
2276.8
... More
Steel reinforcement for RCC work, where not included in the complete rate of RCC including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs stays, hangers, and annealed steel wire etc. complete in all respect below plinth level. Note:-Reinforcement shall be measured in length including hooks, if any separately for different diameters as actually used in work, excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding and placing shall not be measured and cost of these items shall be deemed to be including in the rates for reinforcement 6) Thermo-Mechanically Treated bars of grade Fe-500D or more. (As per Drawing)
1250
-
6800
... More
S/E of G.I Pipe earthing set 40mm dia 2.5 Mtr. long shall be of medium class conforming to ISS: 1239(Part-I) with latest endments shall have 12mm dia holes at interval of 150mm on the entire surface of the earthing pipe shall be tapered and top and of G.I pipe shall be threaded and shall be provided with suitable size of G.I earth wire. The clamp shall be tightened to the earth pipe with 12mm dia galvanized M.S. Nut & Bolts and spring washers complete in all respect upto entire satisfaction of Engineer-In-charge.
5
-
525
... More
Supply & Erection of 16 Chanel DVR complete in all respect upto the entire satisfaction of Engineer-in-charge.
Key Features
Manage & Record from Up to 16 Cameras
Up to 12MP Recording Resolution
8TB HDD, Expandable to 64TB
H.265/H.264/MJPEG/MPEG-4 Compression
16 PoE Ports Audio RCA Input & Output
Up to 128 Simultaneous Users
Up to 320 Mb/s Incoming Bandwidth1x VGA & 2x HDMI Video OutputsONVIF-Compliant
Make:Honeywell/Hikvision/Dahaua
1
-
111000
... More
Supply & Erection of 50 pair telephone cable armooud complete in all respect upto the entire satisfaction of Engineer-in-charge.
100
-
575
... More
15 mm cement plaster on the rough side of single or half brick wall of mix- 2) 1:6 (1 cement: 6 fine sand)
1900
-
96
... More
AUTOMATIC SPRINKLER SYSTEM
Providing and fixing of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories:
250
-
484
... More
Laminate paneling: Laminated HDF cladding over partition (Single side): Cladding over existing partition from floor to bottom of ceiling using panels of 6mm thick exterior grade HDF board cold pressed with 1.5mm thick merino/century laminated of approved shade to be pasted over and fixed to the frame with 12mm thick HDF board below as base mentioned above, in design and pattern as pr drawings. The panels shall be fixed leaving a precise gap of 48mm as per design between two panels. All exposed edges of panels towards the grooves shall be finished as per design as per approval of the Architect. Total length of partition on which laminate paneling is to be installed (As par drawing)
1856
-
781
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-Charge.
(As per Drawing)
825
-
5041
... More
Centering and shuttering including strutting, propping etc. and removal of form for: 1) Foundations, footings, bases of columns, etc, for mass concrete. (As per Drawing)
40
-
175
... More
Providing lowering cutting jointing and testing RCC pipe class NP 3 as per 18-458-2003 with spigot & socketed joints manufactured with ISI marked sulphate resistance cement as per ISi 12330 with rubber rings ISi marked antiternmite as required at site in to trenches for all depths and laying out the same to correct alignment gradients and levels including dressing and trimming and cutting of concrete beds and side of trenches, if required jointing with rubber rings in trenches and jointing with 1: 3/2 cement sand mortar and with end dowels filled with 1: 3/2. cement sand mortar and finishing the joints at an angle of 45 degree with faces of spigot of socket joints cutting and finishing the cut surface to a uniform finish etc. as fully described in item No . 21.38, item 21.44, item 21.45, & item 21.46 including cartage loading and unloading complete in all respects. The internal diametric of the sewer being: 21.95.1) 350mm
40
-
1110
... More
Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 1 O mm gap for thermal expansion.
1.2) Coupler-110 mm
30
-
92
... More
Providing, fixing, testing and commissioning of motorized butterfly valve of flowing dia for filling of over Head Water Tank complete with high and low level control switches to control the valve automatically. The level controllers shall be installed in overhead tank. The level switch will also have manual close arrangement for the valve when water level is high (Top Water Level) in over head tank and open the valve when over head water tank level is low (30% of storage capacity). The system should be complete in all respect with all required accessories, 220 V AC/24V DC, IP-67 electrical water level control unit with SS enclosure, copper control wiring upto control panel in whether proof casing etc. (Make-Atam, Sant, Quin).32 mm nominal bore
1
-
30397
... More
Earthling with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.
5
-
9267
... More
2) Size 450 mm X 600 mm inside (with 455 mm x610 mm cover each frame single seal pattern I weighing 38 kg with C.C. topping)
6
-
5573
... More
Providing and fixing brass stop cock of approved quality: 1) 15 mm nominal bore
44
-
279
... More
Supplying and filling in plinth with sand (conforming to zone-IV, IS 1542) cum under floors, including watering, ramming, consolidating and dressing complete.
90
-
925
... More
Providing, fixing & installation of control valve (Sprinkler Alarm Valve)of Cast iron body and bronze working parts comprising of water motor alarm bronze seal clapper and clapper arm hydraulically driven mechanical going bell to sound continuous alarm when the wetriser/Sprinkler system activates pressure gauges emergency/releases, strainer, pressure switch cock valve complete with drain valve and byepass test control box bell valves, flanges, orifice plate fitting, gasket etc. suitable to 150mm diameter pipe size complete as required as per tender specification ( Make-Newage, Minimax, Spago
1
-
16549
... More
Prov. and fixing of the required toughened glass of saint-gobain make on the provided aluminium frame work complete with lamination of approved shade and make by engineer-in-charge and glass joints filled included weather proof silicon alstone, leaving no holes/gaps in between. Charge (make 3M/Lumar or approved equivalent)
Designer film on glass- providing and fixing in position approved equivalent make frosted/designer film on glass partition/glass on doors etc. The item to be completed as per detail drawing, as specified and as directed by project-in-charge (make 3M/Lumar or approved equivalent)
i) 10mm thick (basic rate-180/Sqft
Total toughened glass area=97 sqm
97
-
2825
... More
Providing and fixing bolts including nuts and washers complete.
25
-
90
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 4) 40 mm nominal bore
3
-
635
... More
Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:-40 amp to 63 amp. Double pole
30
-
758
... More
Centering and shuttering including strutting, propping etc. and removal of form for: 3) Suspended floors, roofs, landings, balconies. (As per Drawing)
1455
-
233
... More
Supply, installation, testing and commissioning of pressure switches in MS pipe for Hydrant Electric Pump/Sprinkler Electric Pump/Diesel Engine Driven Pump/Jockey Pumps, diaphragm type adjustable range from 0-10 Kg/Sq Cm and a regulation of 0.1-1.5 Kg/Sq cm direct mounted SNAP acting type made from the die cast aluminium with epoxy powder coated finish and SS316 diaphragm and other wetted parts, including necessary wiring upto control panel & materials as required as per tender specifications (Make-Wika,H-Guru)
3
-
3321
... More
Supplying and fixing orifice plate made of 6mm thick SS with orifice of require size in between flange and landing valve of external and internal hydrant to reduce pressure to working pressure of 3.5 Kg/Cm2 complete as required & as per tender specification. (Make-Newage, Minimax, Spago)
4
-
1236
... More
Supply/Erection/Testing & Commissioning of UPS Rack complete in all respect.
4
-
16800
... More
Supply/Erection/Testing & Commissioning of UPS Panel. Supply & fixing of dust vermin proof , free floor standing / wall mounted output panel for ups supply with following accessories :- .
• Make: Hydro/ETE/AMCO
1
-
250000
... More
Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe, without separate control switch. 3.2) Group B
100
-
313
... More
Providing and fixing rein force drubber vibration elimination /expension joints ( to provide relief from stresses at pipe flanged) suitable for upto 20 kg/cm2 pressure complete as per tender specification (Make Easyflex, resotoflex) 150mm dia
6
-
9170
... More
Providing and fixing on wall face unplasticised Rigid PVC rain Water pipes conforming to IS 13592 Type-A, including jointing with seal ring conforming to IS 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes.
9.57.3) 150 mm diameter. (As per Drawing)
150
-
301
... More
Supply, installation, testing and commissioning of the fire pump control panel, front operated cubicle construction, floor mounted type, fabricated out of 2mm thick CRCA Sheet, Compartmentalized with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment, cable alley, inter-connections, having switch gear and accessories mounting, internal wiring, earth terminals, top/bottom cable entry, numbering etc. suitable for operation of 415 Volts, 3 phase 4 wire 50 Hz AC supply with enclosure protection class IP-42 complete as required and as per enclosed specification with the following:-
INCOMER-2 Nos.
• 400 Amps Four pole 35 KA MCCB with rotary handle on door
• Digital voltmeter (0-500 volts) with selector Switch and protected by MCB
• Digital Ammeter (0-400 Amp.) with selected Switch & CTs etc.
• Set of (RYB) LED phase and ON/OFF indication lamps protected by MCB
Buscoupler • 1 No. 400 Amp. AP MCCB ( lcu=Ics valve 35KA)
• 1 Set of ON LED type indication lamp controlled by 2 Amp. SP MCB
Including all features of electrical and mechanical interlocking with incomers & bus coupler
BUSHER
• 1 set of 500 Amps 4P Aluminium
OUTGOINGS
• For main fire Sprinkler and hydrant Pump 2 Nos.
• 200 Amps. AP MCCB ( Motor duty) 35 KA with rotary handle on door
• Digital Ammeter ( 0-200 Amp.) with selector Switch & CTs etc.
• Set of LED ON/OFF indication lamp protected by MCB
• Suitable HP fully automatic Star delta starter with over load protection & current sensing type single phase preventer complete with all accessories
• Set of Selector switches for Auto/Manual/OFF operation
• Set of ON&OFF push buttons
• For Jockey pumps 2 No.
• 40Amp. 4P MCCB 35 KA ( Motor duty) with rotary handle on door
• Digital Ampmeter ( 0-40 Amp.) with selector Switch & CTs etc.
• Set of LED ON/OFF indication lamps protected by MCB
• Suitable HP fully automatic DOL starter with over load protection & current sensing type single phase preventor complete with all accessories internal wiring for automatic operation
• Set of Selector switches for Auto/Manual/OFF operation
• Set of ON&OFF POush buttons.
NOTE
1. All MCCB shall have 100% 2. Low meter level indication in fire tank should be interlocked with centralized PLC control panel
1
-
292202
... More
65mm dia.
75
-
1505
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of each 279 631 910 approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
18
-
910
... More
Prov. and fixing CP brass 2way bib tab of (Make Jaquar FLR-5041N or approved equivalent) complete including cutting and making good the walls/metallic sheet for wash basin where required complete in all respect. (Make-Jaquar, Queo, Kohler)
20
-
154
... More
Providing and fixing brass bib cock of approved quality: 1) 15 mm nominal bore
20
-
280
... More
Providing, fixing, testing & commissioning of MS air cushion tank on top of each riser fabricated from 8mm thick MS plate, 200mm in diameter and 1.2mm height with dished ends fabricated from 8mm thick MS plate with air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required and confirming to IS 4736-1968
2
-
3065
... More
Copper Pipe Size 1/4”
300
-
280
... More
80mm dia
4
-
6426
... More
S/E of 11 KV “E” standard compact circular aluminium conductor screened with extrauded semi conducting compoured, XLPE insulated, insulation screened with extruded semi conducting compound in combination with copper tape (0.3 KA for 1 Sec) cores laid up inner sheathed (ST-2 PVC) galvanized steel strip armoured and over PVC sheathed (ST-2 PVC) black cable confirming to IS 7098 (Part-II) 2011 with latest amendments and erection of the same loose in existing pipe or trenches or loose complete with necessary connections complete in all respect up to the entire satisfaction of Engineer-in-Charge. 185 Sqmm 3 Core
(Make:- Havell’s/Universal /ICL/INCAB / CIRTINA)
100
-
1200
... More
HDF Partition over GI Frame: HDF Bare Partition
A base frame made with SAINT GOBAIN GYPROC 50x32mm partition having wall studs at floor and ceiling junction. Fixed to floor and slab bottom to accommodate Gypsteel ULTRA studs and C stud frame for vertical and horizontal framing and noggin channel at electrical switch length provided at average 600mm C/C both ways adequately to the wall in line and plumb ready to receive 12mm thick Heat Resistant HDF board on both sides and electrical conducting within, there will be fixed from floor to ceiling with cutouts for door windows glass etc.
940
-
2200
... More
Extra for forming cavity 5 cm to 11.5cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated MS ties 300mm long of 25x3mm section at not less than ties per sqm as per approve design. (As per Drawing)
0.5
-
121
... More
Supply & Erection of Wi-Fi Access Point complete in all respect upto the entire satisfaction of Engineer-in-charge.
• 802.11 a/b/g/n/ac Wi-Fi Standards
• Range of up to 600'
• 1 x 10/100/1000 Ethernet Ports
• Up to 450 Mbps on 2.4 Ghz Wireless
• Up to 867 Mbps on 5 Ghz Wireless
• UniFi Controller Software
• Integrated Omni Antennas
• Guest Portal/Hotspot Support
• Passive Power over Ethernet
• CE, FCC, IC Certified
Make:Cisco/Ubiquit/TP Link
6
-
41972
... More
Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of RMC form transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-Charge.
Note: - Less cement used as per design mix is recoverable. However no extra payment shall be made if excess cement is used as per design mix).
6.22.1.1) M-20 grade plain cement concrete cum (cement content considered @ 300 Kg/Cum) (As per Drawing)
140
-
4703
... More
S/E of Disc Insulator without fitting T & C Type Jay Shree Make (Conforming to ISS:2486 Part-I & II) with latest amendments complete in all respect & erection of the same upto the entire satisfaction of Engineer-In-Charge.
3
-
392
... More
Providing gola 75x75mm in cement concrete 1:2:4 (1 Cement:2 Coarse Sand:4 Stone aggregate 10mm and down gauge), including finishing with cement mortar 1:3 (1 Cement:3 Fine Sand) as per standard design:
1) in 75x75mm deep chase. (As per Drawing)
110
-
125
... More
Centering and shuttering including strutting, propping etc. and removal of form for 7) Stairs, (excluding landings) except spiral-staircases. (As per Drawing)
45
-
325
... More
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect: 6) Size 560mmx410mm (above counter oval)
20
-
2642
... More
Providing and fixing 8 mm dia C.P.IS.S. Jet with flexible tube up to 1 metre each 10 260 270 long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer-in-charge.
16
-
270
... More
Prov. and fixing 300mm long hand rail (Grab bar) for handicap toilets with stainless steel screws on wooden cleats complete as per instruction of the Engineer-in-Charge. (Make-Jaquar, Queo, Kohler)
3
-
2261
... More
CIVIL WORK Earth work in excavation by mechanical means (Hydraulic excavator/manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 Sqm on plan) including dressing of side and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m.
1) All kinds of soil-(As per Drawing)
2400
-
93
... More
Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group B
300
-
641
... More
Const. of modular type rain water harvesting pit 32cum (for recharge purpose) including items:-
• Drilling of borewell (90 Mtr)
• Injection well insertion UPVC pipe 6” dia mtr. having a load capacity of 6Kg/Sqm.
• Injection well insertion slotted pipes for clog resistant of rain water and reducing possibility of carrying soild.
• Solvent & screws for jointing pipes with each other also for jointing end caps and bell plugs for bore.
• Clamps for keeping the pipe safe and holding the pipe while to ground level.
• Bell Plug-Supplying and fixing of bell plug with each borewell.
• End Caps- Supplying and fixing of end caps at the top of each borewell.
• Supply of bentonite fore bore wells drilling in order to give support and prevent from collapsing.
• Compressor/boki cleaning
• Earth work excavation with JCB/excavators in all types of soil/ordinary rock/hart rock and with a lift upto 5 mtr.
• Material for base work (gravel/stone chips and double washed river sand)
• Dressing
• Compaction of base soil.
• Soil disposal-disposal of extracted soil from the site to inside the boundary walls of the building upto a maximum distance of 0.5 Km.
• Geo textile -to avoid invasion of soil provide stability to the tank and improve quality of water within the tank with tensile strength.
• Modular RWH modules material (685x410x408mm)
• Backfilling of the area constructed in and around after compacting them properly.
• FRP Micro filters capable of removing soilds.
• Riser for filter extension. • Make-Amrica Pvt. Ltd./Bantair Pvt. Ltd./Nine Projects Pvt. Ltd.
1
-
199980
... More
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gmnitre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.
1) New work (Two or more coats applied@ 1.43 liter/ 10 sqm Over sqm 34 62 96 and including priming coat of exterior primer applied @ 0.90 liter/10 sqm
933
-
96
... More
Prov. and fixing of UPVC floor drain of following size inlet and outlet including cutting and making good the wall and floors wherever required complete in all respects. (Make-Supreme, Akg, Finolex)
6
-
289
... More
Solar Panels
Supply Installation testing commissioning of Solar Photovoltaic grid connected roof top Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- (a) Solar Photovoltaic Module manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 1 O years and 80% at the end of 25 years. (b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC (c) Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from O to 50 degrees C. The PCU shall adjust the voltage and frequency level to suit grid frequenc
(d) Data Monitoring System complete with accessories. (e) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. (f) Lightning and surge voltage protection. (g) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required. 32.70.2:- Above 10 kWp and up to 100 Kwp
30
-
48042
... More
Providing salt glazed stone ware pipes grade 'A' in standard length of 600 mm each pipe marked with IS: 651 and their lowering, cutting, jointing and testing as described in item No. 21.38, 21.39, item 21.40 including the cost of jointing materials as well as carriage, loading, unloading, stacking, handling, re-handling etc. complete in all respects to the satisfaction of Engineer-in-charge. 21.94.4) 250mm i/d
93
-
408
... More
2.5 sq. mm ISI Marked FRLS PVC Insulated Single core copper conductor cable
2000
-
24.35
... More
Providing & fixing resting joints made of 20 mm x 3 mm thick G.I. Strips 125 mm long with 4 nos. G.I. bolts and nuts with washers complete
110
-
82
... More
Providing & laying average 6mm thick POP Coating on walls, Ceiling, beams sqm and lintels etc. complete in all respects as approved by the Engineer-In-Charge.
2444
-
76
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:
1) Water thinnable cement primer.
1386
-
25
... More
Granular Sub-Base (Mix in place) Construction of granular sub-base by providing Material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with Rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per technical clause 401 of MORT&H technical specifications
5.27
-
1225
... More
Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 1 O mm gap for thermal expansion.
1.2) Single tee with door-110x110x110mm
10
-
174
... More
Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities
2) Depth exceeding 1.5m but not exceeding 3m (As per Drawing)
1700
-
140
... More
Supply, installation, testing and commissioning of water cooler with inbuilt Aquagaurd RO purification +UV (50LPH). Cooling capacity shall be 60 Ltrs. & 80 Ltrs. Shall be storage capacity. It should have 7 stages purification process, fully automatic, rectangular tank with forced fin and tube condenser, non-corrosive SS-304 outer body, Food-grade SS-304 stainless steel inner tank (18/8 or 18/10) PUF insulation, reciprocating compressor with R22 refrigerant water outlet temp is aprox 17 deg C, operating power supply 230+10% V AC, 50 Hz, 1 Ph, No. of cold water faucet-2. Dimension (660Wx480DX1355H) (Make-Blue Stare/Voltas)
3
-
111224
... More
Providing salt glazed stone ware pipes grade 'A' in standard length of 600 mm each pipe marked with IS: 651 and their lowering, cutting, jointing and testing as described in item No. 21.38, 21.39, item 21.40 including the cost of jointing materials as well as carriage, loading, unloading, stacking, handling, re-handling etc. complete in all respects to the satisfaction of Engineer-in-charge. 21.94.3) 200mm i/d
160
-
267
... More
Centering and shuttering including strutting, propping etc. and removal of form for: 2) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. (As per Drawing)
400
-
316
... More
Supply/Erection/Testing & Commissioning of 12 V 42 AH Battery complete in all respect.
Make: Exide/Amron/Leoch
48
-
7150
... More
Supply & Erection of HT Meter complete in all respect upto the entire satisfaction of Engineer-in-charge. Make:
1
-
150000
... More
15mm cement plaster on the rough side of single or half brick wall of mix.
1) 1:4 (1 Cement:4 Fine Sand) (As per Drawing)
575
-
114
... More
Finishing walls with textured exterior paint of required shade-1) New work (Two or more coats applied @ 3.28 liter/10 sqm) over
453
-
152
... More
Supply, Installation, Testing and Commissioning of repeater panel with 320 character/Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.
Make:- Firelite/Morley/Apollo/GST/ Copper/Bosch
1
-
86857.6
... More
Prov. and fixing of END CAP or clean out plug (Ceiling or Floor) with suitable inset keys for opening make threaded joint with socket fixed to UPVC/SCI pipe complete in all respects. (Make-Supreme, Akg, Finolex)
8
-
2091
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
7) 62.50 mm nominal inner dia Pipes
50
-
1376
... More
Centering and shuttering including strutting, propping etc. and removal of form for: 19) Weather shade, Chajjas, Corbels etc, including edges. (As per Drawing)
75
-
311
... More
2) 20 mm nominal outer dia Pipes
100
-
203
... More
Interior and Furnishing Work work in excavation by means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including out and disposal of excavated lead up to 50 m and up to 1.5 m, as by Engineer-in-charge.
1) All kinds of soil
70
-
87
... More
Supply & erection of Earthing Rod of 20mm dia and 2.5 Mtr. Long shall be tapered to be pointed at one end of about length of 50mm and other end of the rod shall flatten over a length of 150mm into 40mm & having two holes of 12mm dia and 50mm apart alongwith 16 SWG thick conduit pipe 25mm dia 3 Mtr. Long (conforming to IS 9537 (Part-I) enameled black painted complete in all respect upto the entire satisfaction of Engineer-In-Charge.
5
-
430
... More
Prov. and fixing first-Aid Hose Reel 20mm diax30mm long (minimum length) (Thermoplastic Type as per IS-12585) complete with drum, bracket, 25mm dia shut-off valve and 5mm Gun metal nozzle conforming to IS-884, connection with riser with MS C-Class pipe, painting the MS works complete as required & as per tender specification (Make-Newage, Minimax, Spago)
6
-
7031
... More
Supplying, fixing, testing and commissioning o NON- RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified.200 mm dia
1
-
13364
... More
Supply, Erection, Testing & Commissioning of KTS complete in all respect.
Technical specification: 3 line x 24 character tilting backlit display. Graphic Display: 181x56 Pixels. 16 programmable line/feature buttons with dual LEDs. Fixed feature keys include hold, conference, transfer, drop, menu, contact, call log, redial, mute, and headset.
Make: Panasonic/Avaya/Nortel/Alcatel
5
-
19400
... More
Providing and fixing in position single socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing: 1.2) Single Socket Type A-110mm old SWR UPVC pipe lines laid complete
245
-
278
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high each 6 136 142 and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
20
-
142
... More
Providing and fixing electrically o0perated flow indicating switches with threaded connection for indicating water flow in sprinker branch line with necessary junction box installed in accessible place complete as required. ( Wiring from switches to panel and stair case pressurization not included) 100MM DIA
4
-
4844
... More
4) 32 mm nominal outer dia Pipes
20
-
348
... More
Supply and Fabrication of G.I. Angle Iron size 50x50x6mm as per relevant IS specification alongwith painting, priming coat upto the entire satisfaction of Engineer-in-Charge.
60
-
135
... More
Prov. and fixing, testing and commissioning of control panel for Terrace Booster Pumps.
Incoming MCCB 40A 1 set of phase indicating lamps, 1 set of 40 A Al bus bars, 1 No. Ammeter, 1 No. Voltmeter with phase selector switch feeder for Booster Pump-1 No.32 A TP MCCB without release, DOL starter with over load relay, single phase preventor and indicating lamps with ON/OFF push buttons, 1 No. Auto/Manual selector switch. Suitable for booster pumps (Make-Naptune, L&T, SIEMENS)
1
-
50345
... More
6) 50 mm nominal outer dia Pipes
40
-
726
... More
Providing and fixing PTMT Bottle Trap for Wash basin and sink.
2) Bottle trap 36 mm single piece moulded with height of 270 mm, each 18 286 304 effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms
20
-
304
... More
Prov. and fixing CP hand spray with lever control (health faucet) of (Jaquar cat No. ALD-579 or approved equivalent) and flexible hose 1m/1.2m long connection with CP holder for hand spray complete in all respects as per direction of Engineer-in-Charge.
(Make-Jaquar, Queo, Kohler)
20
-
1465
... More
Providing and fixing white vitreous chinaware extended wall mounting water each 1319 10785 12104 closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous chinaware cistern / PVC cistern (with brass fitting) into the wall with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
12
-
12104
... More
S/E of 11 KV Pin Insulator Brown Glazed with creepage distance with 230mm Jaya Shree Make (Conforming to ISS 73/1971) with latest amendments complete in all respect & erection of the same upto the entire satisfaction of Engineer-In-Charge.
6
-
103
... More
Providing and fixing 25mm thick pre-laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked with one side decorative and other side balancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to 15:3818 marked with necessary screw etc all complete.
13.2
-
1509
... More
Supply, Erection Testing & Commissioning of 24 Port Gigabit PoE Switch complete in all respect upto the entire satisfaction of Engineer-in-charge.
Port Standard & Functions • IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
• IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
• IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper)Auto-negotiation
• IEEE 802.3x Flow Control support for Full-Duplex Mode.
Number of Ports
• 28 10/100/1000 Mbps Ports
• 4 SFP Network Cables
• UTP Cat. 5, Cat. 5e (100 m max.)EIA/TIA-568 100-ohm STP (100 m max.)
• Full/Half Duplex
• Full/half duplex for 10/100 Mbps speeds Full duplex for Gigabit speed.
Media Interface Exchange
• Full duplex
• Performance
Switching Capacity • 40 Gbps
Transmission Method
• Store-and-forward
MAC Address Table
16K entries per device MAC Address Update
• Up to 256 static MAC entries Enable/disable auto-learning of MAC addresses
• Maximum 64 bytes packet forwarding rate.
• 29.8Mpps
2
-
45000
... More
Supply, Installation, testing, and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detector per loop and loop length up to 2 km, network communication card, minimum 320 character graphic /LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 + 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories. The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. Ten Loop Panel- Make:- Firelite/ Morley/Apollo/GST/Copper/Bosch
1
-
363916.8
... More
Providing and fixing Unplasticised PVC connection pipe with brass unions:
2.1) 45 cm length-15 mm nominal bore
44
-
57
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x1 Ox0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of oaintina with: 4) Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60.
1010
-
1156
... More
Providing and laying damp-proof course with cement concrete 1:1.5:3 (1 Cement : 1.5 Coarse sand (zone-III) : 3 Graded Stone aggregate 20mm nominal size)
2) 40mm thick (As per Drawing)
55
-
169
... More
Extra for stone work for wall lining on exterior walls of height more than 10m from ground level for every additional height of 3m or part thereof. (As per Drawing)
129
-
60
... More
Supply & Erection of S.S Steel Sheet complete in all respect upto the entire satisfaction of Engineer-in-charge. Make:Jindal
70
-
800
... More
100mm dia.
125
-
2123
... More
Supply, Erection, testing and Commissioning of Patch Panel complete in all respect upto the entire satisfaction of Engineer-in-charge.
2
-
17500
... More
Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications. 200 mm dia
1
-
10012
... More
Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 1 O mm gap for thermal expansion.
1.2) Bend 87.5°-110 mm bend
10
-
104
... More
Supply & Erection of Distribution Panel complete in all respect upto the entire satisfaction of Engineer-in-charge. Supply & Erection of Main Distribution Panel
Enclosure Fabrication of Panel GEC 1
Incomer 400A/4Pole/36KA M.P.Based MCCB L&T/Schneider/Siemens 1 Speraders For MCCB L&T/Schneider/Siemens 2 Rotary Handle L&T/Schneider/Siemens 1
AMF Logic By ATS 400A/4Pole/ATS Scomec/HPL 1
Metering + Controlling 6A/SP/10KA MCB L&T/Schneider/Siemens 8 AMF Controller Comap 1 Aux.Contactor L&T/Schneider/Siemens 1 Digital MFM L&T/Schneider/Siemens 1 8 Pin Relay With Base Salzer 5 12Volt Battery Charger SPS 1 R,Y Indicatng Lamp L&T/Schneider/Siemens 6 B Phase Indicating Lamp L&T/Schneider/Siemens 3 Push Button L&T/Schneider/Siemens 5 Auto-OFF-Manual Selector Switch L&T/Schneider/Siemens 1 400/5,Class-1 CT Rishab/AE/Newtek 4 CT Shorting Terminal Phonix 4
Bus Bar Aluminum Type GEC 1
Out Goings 250A/4Pole/36KA MCCB M.P.Based L&T/Schneider/Siemens 3 Speraders For MCCB L&T/Schneider/Siemens 6 Rotary Handle L&T/Schneider/Siemens 3
80KVAr 6A/Sp/10KA MCB L&T/Schneider/Siemens 10 8 Steps APFC Relay L&T/Schneider/Siemens 1
2,3,5,10 6A-32A/TP/10KA MCB L&T/Schneider/Siemens 4 Capacitor Duty Contactor L&T/Schneider/Siemens 4 ON Indicating Lamp L&T/Schneider/Siemens 4 1Pole2Way Selector Switch L&T/Schneider/Siemens 4
15KVAr 32A/TP/10KA MCB L&T/Schneider/Siemens 1 Capacitor Duty Contactor L&T/Schneider/Siemens 1 ON Indicating Lamp L&T/Schneider/Siemens 1 1Pole2Way Selector Switch L&T/Schneider/Siemens 1
20KVAr 50A/TP/10KA MCB L&T/Schneider/Siemens 1 Capacitor Duty Contactor L&T/Schneider/Siemens 1 ON Indicating Lamp L&T/Schneider/Siemens 1 1Pole2Way Selector Switch L&T/Schneider/Siemens 1
25KVAr 63A/TP/10KA MCB L&T/Schneider/Siemens 1 Capacitor Duty Contactor L&T/Schneider/Siemens 1 ON Indicating Lamp L&T/Schneider/Siemens 1 1Pole2Way Selector Switch L&T/Schneider/Siemens 1
Power Cap 1x2,1x3,1x5,1x10,1x15,1x20,1x25KVAr Larson And Turbo 80
Wiring 1mm to 10mm Copper Flexible ISI 1
Accessories MCB PVC Channel Etc. Reputed 1
1
-
1104400
... More
Supply, installation, testing and commissioning of 6kg ABC ( Power type) Fire Extinguisher mild steel Cylinders ISI marked fitted with pressure indicating gauge internal tube sqoeze lever type valve fully charged with ABC 9 powder ( Mono Anmonium Phasphate)pressured by Nitrozen complete in all respects including wall suspension bracket and confirming to IS-15683 as required as per tender specifications ( Make Newage/Minimax, Spago)
8
-
3777
... More
Supply, Erection, Testing and Commissioning of of Hard Disc 8 Terabyte complete in all respect upto the entire satisfaction of Engineer-in-Charge. Technical Specifications:
Features Quiet Step, Halogen Free, Ramp Load, advanced format 512e, shingled magnetic recording (SMR)
Bytes per Sector 4096
Interface SATA 8TB/s
Buffer Size 128 MB
Weight 3.17 oz
Storage Interface Serial ATA-600
Form Factor 2.5" SFF
Spindle Speed 5400 rpm
Min Operating Temperature 32 °F
Max Operating Temperature 140 °F
Make Seagate/ Weston Digital/ Toshiba
2
-
22600
... More
Supply & Erection of Three Phase 11 KV/ 0.433 KV-250 V, 200 KVA Oil immersed, naturally cooled, Aluminum Wound Outdoor type Distribution Transformers with CSP (Completely self protected) features with external microprocessor based MCCB, strictly conforming to Nigam’s technical specification No. CSC-V/R-I/DH/UH/P & D/2010-2011 read with amendment thereof and as per relevant ISS as amended from time to time & losses confirming to 4 Star rating of BEE as per Appd. make and Specification of DHBVN/ UHBVN including making of plateform and installation of transformer upto the entire satisfaction of Engineer-in-Charge. (with 6 years defect liability period, free of cost)
Voltage Rated Frequency permitted at 75o C
i) Maximum load losses at 50% load at 75o C = 780 watt
ii) Maximum losses at 100% load at 75o C = 2300 watt
iii) Warranty = 78/72 Months. The above losses are maximum allowable & these would not be any positive tolerance.
1
-
303800
... More
12mm cement plaster of mix.
3) 1:3 (1 Cement:3 Fine Sand) (As per Drawing)
450
-
94
... More
Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications.
8) 65mm dia.
1
-
2040
... More
Fire Fighting Work Supply, Installation, Testing and Commissioning of Electric driven main fire pump suitable for automatic operation and consisting of following complete in all respect as per required:
(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS-1520.
(b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 Volts, 3 Phase 50 Hz AC supply with IP-55 protection for enclosure, horizontal foot mounted type with Class-’F’ insulation, conforming to IS-325.
(c) MS fabricated common base plate, coupling, guard, foundation bolts etc. as required.
(d) Suitable cement concrete foundation duly plastered with anti vibration pads.
1
-
450751
... More
Supply, installation, Testing and Commissioning of intelligent addressable thermal fire control module complete as required.
Make:- Firelite/Morley/Apollo/GST/ Copper/Bosch
5
-
2392
... More
Supply/Erection/Testing & Commissioning of Rack & Interconnectors SMF batteries Bank of 42 AH 12 Volt complete in all respect.
4
-
30000
... More
MCC for Plumbing System
Incoming
1 No. 100A, 4 P MCCB, 35 KA thermal magnetic based release (ICS=ICU=100%) with O/L, S/C & E/F protection as per specification and with following accessories
1 No. Digital MFM meter and 3 Nos. CT’s of ration 100/5A, Class-I accuracy and 10 VA burden, digital multifunction meter suitable to measure voltage, Ampere, Frequency, Power Factor with RS-485 Port.
1 Set of ON/OFF/TRIP indication LED lamps with 2 Amp MCB.
1 Set of phase indicating LED lamps with 2 Amp backup MCB.
Bus Coupler
1 No. 100A, 4 P MCCB, 35 KA thermal magnetic based release (ICS=ICU=100%) with O/L, S/C & E/F protection with 1 Set of ON/OFF indication LED lamps with 2 Amp MCB.
Bus Bar
4P copper bus bars of 125A capacity with heat shrinkable coloured sleeves and i/c, SMC bus bar supports at required intervals complete for cross section, size supports & their spacing etc. for with standing fault level of 35 KA for 1 Second.
Out Goings
2 Nos. MPCB of 63A i/c 1.1 KW DOL starter and providing outgoing feeder of 3 core, armoured copper cable of size of 6 Sqmm. to domestic water transfer pump (including 1 No. as standby) each compartment shall contain auto/manual selector switch and indicating and push button lamps etc. as required.
Spare MCCB of following Capacity: -
63 Amps 4 P MCCB- 2 Nos.
Necessary cable alleys, Internal wiring, and interlocking, earthing for all equipment shall also be included.
Note: -
a) All MPCB’s shall be of 35 KA breaking capacity and suitable for motor duty application.
b) Provision shall be made to ensure system protection from dry running of the pump.
c) All incomers and Bus coupler breakers shall be electrical and mechanical interlocked with suitable accessories. d) 2 Nos. Type-2 SPD 65 KA 4 P with 1 No. Red indicator Light for SPD with 1 Set SPD backup fuse 1 P 50 A 20 KA including all necessary accessories.
For Plumbing System as described above.
1
-
223755
... More
Internal Electrical Work 1.5 sq. mm ISI Marked FRLS PVC Insulated Single core copper conductor cable
2500
-
14.9
... More
Supply & Erection of HT Meter Box complete in all respect upto the entire satisfaction of Engineer-in-charge. Make:Jindal
1
-
100000
... More
S/E mark double walled corrugated (DWC) HDPE,pipe 10 kg/cm2,laid 0.75 metre below ground lavel including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work.
DWC/HDPE pipe 63/50 mm outer dia/inner dia
200
-
139
... More
Supplying & laying of 2x1.5 sqmm fire alarm armouured cable,600/1000v rated with annealed copper conductor having XLPE insulation, steel wire armoring & FRLS outer sheath complete as required Make:- Palaza/Polycab/Havells/Finolex
4000
-
112.8
... More
Prov. and fixing angle iron (40mmx40mmx5mm) door frame and SS sheet (2mm thick) cum glass shutter of size 2.1Mx0.9M with 25mmx25mmx3mm angle frame all around and stiffened in between i/c hinges, handle, locking arrangement, painting with approved synthetic enamel paint i/c sign writing on glass at internal hydrant including prov. and fixing of SS sheet 2mm thick on remaining portion above door to close opening i/c painting etc as required glass shall be 6mm thick.
4
-
17932
... More
Providing and fixing white vitreous chinaware battery based infrared sensor each 362 5851 6213 operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
12
-
6213
... More
Providing and fixing CO2 type fire extinguisher consisting of welded M.S. cylinders body automatic modular 002 type extinguisher actuated through a sprinkler head mounted on the extinguisher body finished externally with red enamel paint and fixed to ceiling with brackets complete with internal gauge ( capacity 22.5kg )( Make- Newage Minimax, Spago)
1
-
25455
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 2) 25 mm nominal bore
2
-
464
... More
Supply & Erection of LED 49” complete in all respect upto the entire satisfaction of Engineer-in-charge. Key Features
123 cm(49"), 4K TV
• Android Smart TV
• 20W Dual Speakers
• 2 x USB 2.0, 4 x HDMI
• Ideal Viewing Distance: 8 - 10 Ft
Make:Sony/Sumsung/Panasonic/LG/MI
1
-
76000
... More
Supply, Erection, Testing & Commissioning of Digital SPC (Stored Programmed Control) complete in all respect upto the entire satisfaction of Engineer-in-charge. 1 Digital Signal Processors 12 CO 10 Digital 56 Analog Extension Expendable Up To 128 Analog Extensions 128 IP Extension 2way Voice Recording Unified Voice Mail for 2 Hours 4 SIP Trunk
Make Panasonic/Avaya/Nortel/Alcatel
1
-
156000
... More
Prov. and fixing vertical blinds with 100mm pr 89mm wide imported superior polyster base fabric vanes with scotch guard application as per approved sample, make of vista levellor or equivalent. The vertical blinds shall have a head rail of extruded anodized high strength aluminum alloy, shall be 25mmx50mm high or equivalent with wall thickness of 1.2mm or equivalent. End control units consist of reduction gearbox having the reduction ration of 3:5:1 for a very smooth operation of the blind.
162
-
1188
... More
Providing RCC foundation of M20 grade (1 Cement:1.5 Stone aggregate: 3 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 50 kg/cum of concrete contents, concrete cover 50mm, over a bed of 75mm thick PCC 1:5:10, of required dimensions as per OEM recommendations to provide levelled surface for placement of the DG set complete in all respects and as per directions of Engineer-in-charge
(Size of foundation assumed = 5.0x1 .Bx1 .Om)
Unit: per cum 125 KVA DG Set
1
-
31132
... More
Providing & lying 25 mm x 3 mm GI strip in 40 mm dia GI pipe as/ from earth electrode including soldering etc. as required
70
-
403
... More
Supply & fixing internal and external SS single headed fire hydrant landing valve with instantaneous Gun metal coupling of 63mm dia with cast iron wheel ISI marked conforming to IS-5290 (Type-A) with blank PVC cap and chain as required (Make-Newage, Minimax, Spago)
4
-
4872
... More
40mm dia.
580
-
919
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
1) White vitreous chinaware Wash basin size 630x450 mm with a each 513 1757 2270 pair of 15 mm C. P. brass pillar taps
6
-
2270
... More
4 Way-150mm dia MS Pipe
1
-
9355
... More
40 mm nominal bore
1
-
31997
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:
1.1) Kitchen sink with drain board 510x1040mm bowl depth 250 mm
4
-
4165
... More
Prov. and fixing of 25mm dia gun metal air release valve with all fittings and forged ball valve on header complete as required and as per tender specification (Make-Atam, Sant, Quin)
1
-
1079
... More
Supply, Installation, Testing and Commissioning of addressable horn cum strobe complete as required.
Make:- Firelite/Morley/Apollo/GST/ Copper/Bosch
6
-
2795.2
... More
Supply, Erection and Transportation upto site including all taxes as per latest Govt. Instruction amended time again of Prestressed cement concrete pole as per IS: 1678/1960. 11 Mtr. Long 140mm x 200mm at top and 140mm x 400mm at bottom with working load of 400 kg. Buried 2.20 m in ground or as per UHBVNL specification complete in all respect up to the entire satisfaction of Engineer-in-Charge.
4
-
7510
... More
Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete: 2) 250x16mm
80
-
154
... More
Annunciation and indication Panel with Level Controller
Supplying, installation, testing and commissioning of annunciation and indication panel with electrical interlocking arrangement complete in accordance to specification with providing and fixing level controller (1 No. Raw and 1 No. Treated Water tanks, 2 Nos. level controller), etc. providing control cabling upto MCC panel i/c supplying and fixing MCC panel in SS enclosure with suitable size breaker as required. Each controller shall have 3 Nos. SS 304 probes.
Sub Head-II Electrical Installation for Plumbing System
Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre shall be fabricated out of 14 gauge CRCA sheet steel in form in 3B formation with reinforcement of suitable size angle iron, channel ‘T’ sections irons and/or flats wherever necessary cable gland plates shall be provided on tip as well as at the bottom of the panels. Panels shall be treated with all anti corrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint, 2 Nos. earth terminals shall be provided for 3 phase, 4 wire 50 Hz supply system. Lifting hooks shall also be provided in case of large panes. Approval shall be taken for each panel before fabrication. Cadmium Plated hardware shall be used in fabrication of panels. Quoted rates shall inclusive of cables, cable trays, earthing (in accordance to specification) with earthing from panel to each motor/equipment (Make-Naptune, L&T, SIEMENS)
1
-
37996
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately): 150 mm dia
1
-
4809
... More
Bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the Engineer-in-charge. Size of the main with which connection is to be made. 20.49.1 Up to 200 mm internal diameter.
1
-
1063
... More
Supply, Erection, Testing & Commissioning of Operator Console complete in all respect upto the entire satisfaction of Engineer-in-charge. Technical Specification
LCD display which supports Euro fonts and Katakana character sets • Americans with Disabilities Act (ADA) and CE2001 compliant • 14 fixed buttons • 19 programmable feature buttons • 12 fixed Direct Trunk Group Select buttons (DTGS) • Jack for connecting with the optional 26C expansion unit
Make Panasonic/Avaya/Nortel/Alcatel
1
-
17600
... More
Providing and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti termite treatment and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filing junction of wall and floor, along with the external perimeter of building, expansion joints surrounding of pipes and conduit etc, complete (plinth area of the building at ground floor only shall be measured) using Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
940
-
318
... More
Column HDF Board Paneling-Column Paneling: A base frame made with SAINT GOBAIN GYPROC size as per design and framing having studs at floor and slab and back wall as per required at junctions. Fixed to floor and ceiling to accommodate Gypsteel ULTRA studs and C stud frame for vertical and horizontal framing and noggin channel at electrical switch length provided at average 600mm C/C both ways adequately to the wall in line and plumb ready to receive 12mm thk HDF board on outer side and electrical conducting within, there will be fixed from floor to ceiling.
150
-
1841
... More
4 sq. mm ISI Marked FRLS PVC Insulated Single core copper conductor cable
1000
-
35.2
... More
70 sqmm 4 Core (Armoured
150
-
675
... More
Supply & Erection of Under Floor Management complete in all respect upto the entire satisfaction of Engineer-in-charge.
100
-
1350
... More
Sound absorbent ceilings-Providing and fixing ecophon or equivalent soft felt (glass wool) tiles with acoustic performance for ceilings in 600x600 grid or as per design or approval from E/I the acoustic ceiling tiles with a noise reduction coefficient (NRC) rating ranging from 0.90 to 1.00 (e.i. 90 to 100 sound absorption) in visible grid for direct fixing.
48
-
286
... More
Supply, Installation, Testing and Commissioning of Surface mount back box complete as required.
Make:- Firelite/Morley/Apollo/GST/Copper /Bosch
50
-
225
... More
80 mm dia
2
-
3845
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 5) 50 mm nominal bore
1
-
818
... More
Supply, Installation, testing, and commissioning of intelligent addressable programmable sounder complete as required.
Make:- Firelite/Morley/Apollo/GST/ Copper/Bosch
6
-
2110.4
... More
Providing and fixing toilet paper holder:
1) C.P. brass
6
-
436
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore
10
-
464
... More
Earthling with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but with out charcoal or coke and salt) complete as required.
5
-
3772
... More
Constructing brick masonry road gully chambers as per standard drawings (as sizes given below) including dressing of beds and sides of to profiles, 15cm thick lime 16:24:100 (as per in item No.10.6) in foundations 1st class laid in sand mortar 1 :5, 40 mm thick cement 1 :2:4 topping inside the chamber with a coat of 1.5mm thick neat laid in one to the topping, the entire inner of the chamber rendered with neat not less than 12mm in thickness of 1 :2 cement sand plaster and with of neat cement 1 mm thick absolutely smooth polished and to templates including labour for the C.I. gully grating and including painting with coal tar (as Specified in item No. Item 21.48) to the of the Engineer in-charge.
1.1) Single road gully chamber
Size: 610mmx457mmx800mm
6
-
3625
... More
Steel for R.C.C. work, where not included in the complete rate of RCC, including straightening, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level
Note: - Reinforcement shall be measured in length including hooks, if any, separately for diameters as used in work, excluding overlaps. Wastage, welded joints, spacer chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for Reinforcement
3) Cold twisted bars-Reinforcement to be taken @ 120Kg/Cum of concrete -5.50 Cum @ 120Kg/Cum
660
-
68
... More
Supply/Erection/Testing & Commissioning of 6 KVA UPS complete in all respect.
Technical Specification:-
Make Vertiv/Libert/APC/Schneider/Mistubishi/
3
-
185000
... More
3) 25 mm nominal outer dia Pipes
100
-
261
... More
80mm dia
2
-
3845
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered sqm surface to prepare the surface even and smooth complete.
120
-
79
... More
rov. and fixing of horizontal centrifugal end suction single/multi state, single/multi outlet pumping set with bronze impeller with CI body and connected by a flexible coupling to a totally enclosed fan cooled induction motor mounted on a common structural base plate with all pump accessories complete as per specification including pressure gauges with gun mental isolation valves and anti vibration pad, motor to be suitable for +/- 5% 415 V, 3 phase, 50 Hz, AC supply (Specification as per fire fighting requirements and on the patter of TAC or local authority approval) as instruction and following specification (All pumps shall have mechanical seal) (Make-Grundfos, Wilo, KSB) Fire Terrace Pump:
Type-End Suction
Speed-2900 RPM
Capacity-900 LPM
Head-35 Mtr.
App HP-10
1
-
72499
... More
Providing and laying vitrified floo tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 2) Size of Tile 600x600 mm sqm
1000
-
1105
... More
Prov. and constructing brick masonry desilting chamber of size 20x150xupto300cms effective depth inside with 75 class designation brick work 345mm/230mm thick in cement mortar 1:4 (I Cement:4 coarse sand) with weep hles all around, SFRC cover heavy duty 560mm dia and 150mm thick RCC top slab 1:2:4 mix (1Cement:2Coarse sand:4 graded stone aggregate 20mm nominal size) including necessary excavation, back filling, disposal of surplus earth as directed, foundation concrete 1:5:10 mix (1cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size) below masonry walls with 150mm projection at either side including necessary baffle wall inside (as per std. drawing), excavation, back filling and disposal of surplus earth upto a lead of 200mtr. poly propylene coated rungs @ 300mm C/C.
1
-
72215
... More
Aerocon Panels Roofing;
Prov. and fixing aerocon roof panel with 2x2ms frame of 600mmx3000mm in 50mm thickness with 43 Kg weight per sqmt. Having axial load/meter width (KN/M) 53 mm uniformly distrubted load (Kg/Sqm) in 1.5m span of 198 with factor of safty 2.567 flexural strength modules of rupture (Kgg/Sqcm) 50 (Kg/sqcm) compressive strength and 0.22 (w/m degk) thermal conductivity, 37 Db sound transmission coefficient, 60 minutes Fire rating and 3.7 (1) fire propagation.
i) Cafeteria Roofing-Area of Cafeteria roof (as per drawing) 80 Sqm
100
-
1599
... More
Centering and shuttering including strutting, propping etc. and removal of form for
3) Suspended floors, roofs, landings, balconies.
48
-
233
... More
Prov. and laying of base course of floors consisting of 100mm thick cement 1:8:16 and 100mm sand or stone filling.
218.26
-
291
... More
Supply installation, testing and commissioning ISI marked ( IS-15683) portable fire extinguisher water (gas pressure) type capacity 9kg with gun metal cap and nozzle and complete in all respect including initial fill and wall suspension breakers as required as per tender specifications ( Make Newage, Minimax, Spago)
1
-
2710
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering below plinth level and up to Floor IV level:
6) 1:4:8 (1Cement: 4 Coarse Sand (Zone-III): 8 graded cum stone aggregate 40mm nominal size.
105
-
2735
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor four level, excluding cost of centering, shuttering, finishing and reinforcement.
5.5
-
6684
... More
Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as Group B
100
-
929
... More
Aerocon Panels Roofing; Prov. and fixing aerocon roof panel with 2x2ms frame of 600mmx3000mm in 50mm thickness with 43 Kg weight per sqm. Having axial load/meter width (KN/M) 53 mm uniformly distrusted load (Kg/Sqm) in 1.5m span of 198 with factor of safety 2.567 flexural strength modules of rupture (Kgg/Sqcm) 50 (Kg/sqcm) compressive strength and 0.22 (w/m degk) thermal conductivity, 37 Db sound transmission coefficient, 60 minutes Fire rating and 3.7 (1) fire propagation.
i) Cafeteria Roofing-Area of Cafeteria roof (as per drawing) 80 Sqm
80
-
1079
... More
Public Health Work Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5m, as directed by Engineer-in-charge.
1) All kinds of soil.
150
-
87
... More
Providing and fixing following size pressure gauge (0-15 kg/Cm2 complete with shut off valve duly celebrated before installation complete as required and as per tender specification ( Make Wika, H-Guru)
12
-
513
... More
Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications.
7) 80mm dia.
1
-
2273
... More
Supply & Erection of 300 Sqmm single core un-armoured power cable with aluminum conductor 650/1100 V confirming to ISS 1554(Part-I) of 1988 IS 7098/Part-I/1988 with latest amendments upto respect upto the entire satisfaction of Engineer-In-Charge.
Make (Plaza/Havells/ICL/KEI/UNIVERSAL/CIRTINA/ Panasonic Anchor)
24
-
700
... More
Providing and fixing 25mm dia inspecting & testing assembly with S.S. isolation valve S.S. sight glass byepass valve & connected to the line drain complete in all respect as per standard practice of code including pressure gauges of approved make
4
-
10815
... More
Supply, Erection, Testing & Commissioning of 1. Main Distribution Frame 100 Pair constitute of the frame body, connection block, Main Distribution Frame is use to connection with the switch and the user cable, patch cord etc. . (The double side main distribution frame made by advance aluminum-alloy with safety grounding system facilitate installation and enlarge capacity) 2. INTERMEDIATE DISTRIBUTION FRAME is a cable rack/ box that interconnects and manages the telecommunications wiring between and MDF and EPABX. The single side main distribution frame improve the advantage of double side main distribution frame, the termination of both external side and exchange side are on the front; the operation of jump wire, alarm system, protectors are also on the front. It completely realizes the front-operation which reduces the space requirement and laying wires regularly it is facilitate operation and maintenance.
Features:
1. A good metal frame, rigid, elegant appearance, a variety of cable connecting all with Built-in card access methods, safe and reliable.
2. Krone module should be connected in parallel and on quite distance, so that it should be maintain cleanly and protection unit also can be mounted on that if required.
3. The frame has perfect grounding system
Technical Parameters Working temperature - ~ + 40 (Degree)
Relative humidity 85% (30 Degree)
Atmospheric pressure 70 ~ 106 (kpa)
Storage temperature -25 ~ - +55 (degrees)
Make: Karone/C&S
5
-
13400
... More
Central Air Conditioning : Low side Items
Supplying, fixing, testing and commissioning of condenser water pipes/ non insulated chilled water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. 150mm
170
-
3096
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
22.85.1) 15 mm nominal outer dia Pipes
200
-
147
... More
20mm thick cement plaster damp-proof course 1:3 with 2 coats of bitumen at 1.65Kg per Sqm. laid hot and sanded.
2) Horizontal (As per Drawing)
505
-
252
... More
Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc. + Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.
940
-
56
... More
100 mm dia
2
-
2983
... More
Wall lining butch work up to 10m height with Dholpur stone 40mm thick rough facing on the exposed surface with stone strips of minimum length 30mm and required width, including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases of size 75x75mm and by providing layer of 75mm thick strips i/c 12mm thick bed of cement concrete 1:3 (1 Cement:3 coarse Sand) i/c ruled pointing in cement concrete 1:2 (1 White Cement: 2 Stone Dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in-charge. (As per Drawing)
234
-
1419
... More
Fabric Warped Pin Board
Prov. and fixing of particle board pin up panels on wall made of 12mm thick cellotex board covered with fabric of response make (Base rae Rs 400/- per mtr.) as per the design and approval of the Architect.
10
-
1177
... More
Supply, Erection, Testing and Commissioning of 4 MP IP Bullet Camera complete in all respect upto the entire satisfaction of Engineer-in-charge.
Technical specification:
Image Sensor 1/2.8 CMOS
Number of Pixels (H x V) 1920 x 1080
Electronic Shutter 1/25s ~ 1/ 100000s
Iris Fixed Iris
Min Illumination 0.1 lux @F1.2, AGC ON; 0 lux with IR
Lens 3.6 mm @F1.6, Angle of View:
79 deg
Day & Night TDN
Wide Dynamic Range Digital WDR
Video Compression H.264 / MJPEG
Compression Standard Baseline / Main / High Profile
Resolution 1080p, 720p, D1, CIF
Number of Streams 3(main stream ,sub stream ,third stream)
Resolution Main stream: 1920 x 1080, 1280 x 720 Sub stream: 704 x 576 , 352 x 288 Third stream: 704 x 576 , 480 x 240 , 352 x 288
IR Distance 20 – 30 m
IP Rating IP66
Power Supply DC 12V
Dimensions (mm) 87 x 219
Weight 605 g
Make: Honeywell//Panasonic/ Hikvision /Wisenet
16
-
23992
... More
Making Khurtras 45x45cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 Cement:2 Coarse Sand:4 Stone aggregate 20mm nominal size) over PVC sheet 1mx1mx400micron, finished with 12mm cement mortar 1:3 (1 Cement:3 Coarse Sand) and coat of neat cement, rounding the edges and making and finishing the outlet complete.
20
-
165
... More
Supply and erection of 29/30 watt LED Recessed Mounted, 597x 597mm low depth (less than 52mm ) made up of CRCA housing with powder coated having CCT 6500K and efficiency better than 100 lumen/watt with glare free opal diffuser and life of 50K burning hours (L 70), CRI better than 70 with inbuilt protection against short circuit, pf0.9, over voltage protection and surge protection of upto 2.5 KV including connections etc. upto the entire satisfaction of Engineer-in-charge of the work. (Warranty- 3 Years Including Driver against any manufacturing defect Separate letter head to be given by the quoting agency).
Make: PHILLIP’S/GE/LT/BAJAJ/PANASONIC/SYSKA
80
-
3910
... More
Prov. & fixing 63mm dia SS short branch pipe with 20mm (nominal internal diameter) in size stainless steel nozzle conforming to IS-903 suitable for instantaneous connection complete to inter-connect hose pipe, coupling etc. as required and as per tender specification. (Make-Newage, Minimax, Spago)
4
-
1400
... More
Half brick masonry with common burnt clay non-modular bricks of class designation 7.5 in foundations and plinth in: 2) cement mortar 1:4 (1 cement: 4 coarse sand)
331
-
513
... More
Providing and placing on terrace (at all floor levels) polyethylene water litre 7 8 storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
15000
-
8
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
2.1) Flexible pipe-32 mm dia
18
-
64
... More
(L) Miniature Circuit Breaker and Isolator.
Supply and Erection of Miniature Circuit Breaker and Isolator240/415 V in the existing distribution board including making necessary connections:-
23.22.5.1:- 6 amp. to 32 amp Single Pole
200
-
162
... More
Prov. & fixing 63mm dia 15 Mtr. long RRL hose pipe with 63mm dia male and female gun metal couplings duly binded with GI wire, rivets etc. conforming to IS-636 (Type-A) complete as required and as per tender specification. (Make-Newage, Minimax, Spago)
6
-
4117
... More
Air pressure vessel for Fire pump:- Providing and fixing double flanged vertical air vessel fabricated from 6mm MS plate with dished ends from 8mm M.S. plate outside with one coat of primer and two coats of synthetic enamel paint of approved shade, complete with approved quality of pressure switches ( 03 Nos.) pressure gauges and all other required accessories to operate commonly main fire pump, sprinkler pump, Diesel Fire pumps and Jockey pumps at drop of pressure automatically at required pressure setting complete as required and as per tender specification. Recommended dia-450mm
Height of shell-2000mm
Working pressure-12kg/sqcm.
Test pressure-16 kg/sq.cm
1
-
3199
... More
Supply/Installation/Testing/Commissioning of LED T8 Batten Tube Light fitting with wattage range of 20 Watt or other equivalent make & model of Phillip’s/GE/ Bajaj with lens with high power LED T8 Batten light with complete assembly with LED driver and accessories required to complete the job in all respect including erection and fixing including connection and other petty material for the same upto the entire satisfaction of Engineer-in-Charge of the work.
Make:Bajaj/Panasonic/Havells/Philips
20
-
475
... More
Supply and erection double pole/Four pole Residual (RCCB/ELCB) on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work DP RCCB 30ma sensitivity , 63 A
20
-
2324
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and
frame to be not less than 2.70 kg as per standard design:
1.1) 100x100 mm size P type-With common burnt clay non-modular bricks of class designation 7.5
3
-
1632
... More
Supply and Erection of 25 sqmm 4 Core Armoud complete in all respect upto the entire satisfaction of Engineer-In-Charge.
200
-
260
... More
Supply, installation, Testing and Commissioning of intelligent addressable thermal detector with rate of rise cum fixed temperature thermistor complete with base as required.
Make:- Firelite/Morley/Apollo/GST/ Copper/Bosch
5
-
2170.4
... More
Prov. and fixing 110x110mm UPVC ‘P’ trap with height riser/saddle as required size fitting with seal 50mm of self cleansing design floor/urinal trap without vent suspended with supporting clamp or in sunken portion including cutting and making good the walls and floors wherever required complete in all respects. (Make-Supreme, Akg, Finolex)
21
-
728
... More
Supply, Installation, Testing and Commissioning of Network card for DXc Panels complete as required.
Make:- Firelite/Morley/Apollo/GST/ Copper/Bosch
1
-
42585
... More
Supply and erection of 10.5 cm dia M.S.Fan box including 8 mm dia 30 cm each 106 long M.S. Road made into suitable suspension hook and erected in R.C.C. slab for the erection of fan complete with all labour and material required to complete the job.
100
-
106
... More
S/E of 2 Mtr Patch Cord complete in all respect upto entire satisfaction.
Specifications
Conductor 24 AWG, Multi-strands
Conductor Metal Bare Copper
Insulation Material High Density Polyethylene Material PVC I, 94V-0
Color Code Cool Grey 5C
Heat Resistance 60C minimum (Temperature limited)
Flame Property The purpose of the vertical flame test is to screen out flammable wires, it follows the VW-1 (UL) andFT-1 (CSA) standards.
Insertion Cycles 750 times
2 Meter Long CAT 6 work with all types of computers. Make D-Link AMP LAPP
50
-
405
... More
Supplying & Installing of SPLIT type AC 1.5 TR capacity of nominal cooling capacity 18000 B.T.U Air flow not less than 375 Cfm & power consumption not to exceed 1900 watts & Indoor noise level not to exceed 50 dB, the A.C. shall be suitable for 230+10% volts, 50 Hz A.C. supply & shall be capable of performing following function:-
• Cooling
• In humidifying
• Air Circulation • Filtering A.C. shall be of 3 star rating
Make: Hitechi/ Daikin/ O’ General *Warranty of Compressor : 5 Years
20
-
47300
... More
150 mm dia
11
-
5097
... More
Supply, Erection, Testing & Commissioning of Cat-6 complete in all respect.
3000
-
43.9
... More
Laying and fixing granite stone in all shades 15mm to 18mm thick in skirting/dado riser of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite including labour for fixing cramps pins and dowels etc.
50
-
2318
... More
Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 23.22.1.9:- 4 pole MCCB 6 amp to 100 amp , 25 KA
40
-
6865
... More
Fire Extinguisher
Supply installation testing and commissioning ISI marked (IS 15663) Fine Extinguisher carbon dioxide type capacity 4.5kg flat base including valve discharge hose of not less than 10mm dia, 1mm long and complete in all respect including initial fill with CO2 gas confirming to IS 307-1966 and wall suspension barker as required as per tender specifications ( Make, Newage, Minimax, Spago)
8
-
8040
... More
Half brick masonry with common burnt clay non-modular bricks of class designation 7.5 in foundations and plinth in:
2) Cement Mortar 1:4 (1 Cement:4 Coarse Sand) (As per Drawing)
100
-
513
... More
PIPES & VALVES
Supplying, fixing, testing and commissioning of pipes of following sizes of MS ‘C’ Class along with necessary clamps, vibration isolators and fitting such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted with wapping, coating and buried in ground excavation and refilling etc. as per tender specification and as required complete in all respect (Make-Jindal, Apollo, Tata)
10
-
2436
... More
Supply, Erection, testing & commissioning of 24 U Wall mount rack.
Basic Frame : Welded/CKD
Top & Bottom Cover : Welded to Frame with Cable entry exit cut outs Front Door : Lockable Toughened Glass Door.
19’’ Mounting Angle : Formed Steel
Std. Equipment Mounting: DIN Std. 10mm Sq. Slots
Standard Finish : Powder coated Standard Color : Grey& Off white Or Black
Rack Standard : Conforms to DIN 41494 or equivalent standard.
Static Load : 30 Kg
Make COMRACK/APW/WBOX/MAXMUS/TRIPP-LITE
1
-
39000
... More
10mm cement plaster of mix.
2) 1:3 (1 Cement:3 Fine Sand) (As per Drawing)
2445
-
96
... More
Supply, Installation, Testing and Commissioning of heat detector operating at 54 C/57C with rate of rise cum fixed temp. (dual thermistor) type with mounting base complete with all connection etc. as required.
Make:- Firelite/Morley/Apollo/GST/ Copper/Bosch
5
-
846.4
... More
12mm thick cement plaster damp-proof course 1:3 with 2 coats of bitumen at 1.65Kg per Sqm. laid hot and sanded.
1) Vertical (As per Drawing)
817
-
234
... More
Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately} 2.1) Kiln seasoned and chemically treated Hollock wood-35 mm thick shutters.
162
-
1692
... More
Providing and fixing to the inlet mouth of rain water pipe PTMT (an each 4 87 91 Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms.
40
-
91
... More
Supplying and applying waterproofing treatment for ‘Raft Slab’ by using 1.2mm thick fully bonded HDPE sheet membrane complying to BS8102:2009/IS16471-2017. The HDBE shall be virgin HDPE & not recycled, thickness of bare HDPE shall not be less than 0.8mm coated with pressure sensitive adhesive layer and a trafficable granular top layer.
The HDPE membrane shall have the following typical properties:
1. Tensile Strength: 27 Mpa (as per ASTM D412)
2. Puncture Resistance: 1000N+5% (as per ASTM E154)
3. Elongation: 500%
4. Peel adhesion to concrete: 1500N/m (as per ASTM D903 Modified)
5. Resistance to Hydrostatic Head: 70m (as per ASTM D751-06 (2011)
6. UV exposure test (60 Days): No Change.
7. Lap Joint Strength: 1500N/m (as per ASTM D1876)
HDPE Membrane shall installed over the entire PCC area with standard 75mm selvedge laps and end laps overlaid with HDPE sealed tape as per manufacturer’s instructions. The rates are including of supply and installation of membrane as per manufacturer methodology. The rates are inclusive of surface preparation injection grouting at honeycombed areas all complete as per manufacturer methodology. (As per Drawing)
680
-
735
... More
Supplying & fixing of reputed make copper refrigerant piping with insulation not less than 0.80 mm thick including drilling holes in the wall if required with cost of petty material required to complete the job complete in all respect upto the entire satisfaction of Engineer-In-Charge. Copper Pipe Size 3/8”
300
-
390
... More
Brick work with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in:
2) Cement Mortar 1:6 (1 Cement:6 Coarse Sand) (As per Drawing)
170
-
4436
... More
Painting top of roofs with bitumen of approved quality @ 75 Kg per 10 Sqm impregnated with a coat of coarse sand at 60 cum per 10 Sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete.
1) With residual type petroleum bitumen of grade VG-10. (As per Drawing)
450
-
104
... More
Supply, Installation, Testing and Commissioning of addressable manual call point complete as required.
Make:- Firelite/Morley/Apollo/GST/ Copper/Bosch
6
-
3087.2
... More
Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge. 20.71.1:- 48" (1200mm)
70
-
2300
... More
Carriage of earth with loading and unloading complete in all respect.
1920
-
100
... More
Supply & Erection of 6.0 sq. mm ISi marked, FRLS PVC insulated, single core copper conductor cable complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. Make:Plaza/Havells/Polycab
1200
-
50
... More
Prov. and fixing 1000mm high SS railing made of 304 grade high quality stainless steel with balustrades at regular interval (minimum distance of 900mm) and three pipes running at equal distance and parallel to the handrail. The handrail made in 16 gauge and balustrades in 18 gauge (Rs. 450/Kg)
Total weight of SS railing=550 Kg
550
-
441
... More
12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.
205
-
1156
... More
Supply, Installation, Testing and Commissioning of sensor mounting base complete as required.
Make:- Firelite/Morley/Apollo/GST/ Copper /Bosch
50
-
725
... More
Providing and fixing aluminum die cast body tubular type universal hydraulic each 47 885 93 2 door closer (having brand logo with ISI, IS: 356 4, embossed on the body, door weight up to 35 kg and door width up to 7 00 mm), with necessary accessories and screws etc. complete.
80
-
932
... More
Supply, Erection, Testing& Commissioning of Caller ID Telephone Set complete in all respect upto the entire satisfaction of Engineer-in-charge.
Features:-
Corded phone with caller ID and handsfree speakerphone. Auto redial with 20 redial memory . 20 one touch and 10 speed dialer Ringer indicator.39 centimeters long curl cord . programmable flash time setting
programmable tone and pulse setting
Make Panasonic/Beetel/BPL
25
-
2150
... More
Providing and laying Polished Granite stone flooring in required design andpatterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1 :4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
1) Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
326
-
3031
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm sqm 196 651 847 or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1 :4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
342
-
847
... More
Prov. and fixing SS double Coat hook of (Jaquar cat No. CAN-1161N or approved equivalent) complete including consumable items, cutting and making good the walls where required complete in all respects. (Make-Jaquar, Queo, Kohler)
16
-
657
... More
5) 40 mm nominal outer dia Pipes
20
-
481
... More
50mm dia.
340
-
1151
... More
Providing and fixing factory made uPVC white colour sliding glazed window up to 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x B mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
1) Two track two panels sliding window made of (small series) frame sqm 909 5144 6053 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window up to 1.75 sqm)
143
-
6053
... More
Supplying, fixing, testing and commissioning o STRAINER flanged end & PN 16 pressure rating as specified.150mm dia
4
-
9112
... More
Designing, Supply & erection of DG set of capacity given below with noise controlled devices acoustic of suitable rating, testing and commissioning of diesel generating set, radiator cooled, 3 phase, 4 wire, 50 cycles 415 +(-)1% volts AC alternator coupled directly through a set of flexible coupling on a common MS fabricated base frame with diesel engine complete with suitable size incoming cable from generator to change over/AMF panel, making 2nd incoming cable connection from transformer, outgoing cable connection from changeover/ standard panel, making second incoming cable connection from transformer, outgoing cable connection from changeover / STD panel to incomer of motor starter panel, fenced enclosure with platform for DG sets complete as per following detailed scope and specifications and directions of Engineer-in-charge.
The rating should be at 1500 RPM.
a) Diesel Engine
b) Alternator
c) Battery 24 v.
d) Base Plate.
e) suitable sq mm suitable core copper cable upto 40 metres.
f) Tools, standard panel
g) Metering set 415 VAC-1 set (Amp. meter, Volt Meter, ASS, VSS, Phase Indicator,
control fuse, frequency meter, CT's)
h) Metering set 60/5A/11 OV (Amp. Meter, Volt Meter)
i) Overload protection for DC-1 No.
j) Battery Charger 24V DC
k)Copper bus bar of suitable size
I) KWH meter 96 sqmm size
m) Starting fuse button and key switch9on/off)
n) Indicating lamps for low lubricated oil pressure, high coolant temperature, set
running, load on, De control and other required accessories complete in all respects
to the satisfaction of Engineer-in-charge
125 KVA
1
-
896053
... More
Supply, Installation, Testing and Commissioning of response indicator on surface/recessed MS Box having two LED, Metallic cover complete with mounting base complete as required. Make:-Firelite/Morley/Apollo/GST/ Copper/ Bosch
35
-
210.4
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 1) 20 mm nominal bore
3
-
430
... More
80 mm dia
10
-
2273
... More
Supply & Fabrication of G.I. Channel size 100x50x6mm G.I. Channel size 75x40x6mm as per relevant IS specification, painting and priming coat upto the entire satisfaction of Engineer-in-Charge.
80
-
135
... More
Supply & Erection of Distribution Panel for Aircondioner Type Description Make Qty.
Enclosure Fabrication of Panel GEC 1
Incomer 250A/4Pole/36KA MCCB L&T/Schneider/Siemens 1 Speraders For MCCB L&T/Schneider/Siemens 2 Rotary Handle L&T/Schneider/Siemens 1
Metering + Controlling 6A/SP/10KA MCB L&T/Schneider/Siemens 8 Digital MFM L&T/Schneider/Siemens 1 R,Y Indicatng Lamp L&T/Schneider/Siemens 6 B Phase Indicating Lamp L&T/Schneider/Siemens 3 250/5,Class-1 CT Rishab/AE/Newtek 4 CT Shorting Terminal Phonix 4
Bus Bar Aluminum Type GEC 1
Out Goings 100A/4Pole/25KA MCCB L&T/Schneider/Siemens 4 Speraders For MCCB L&T/Schneider/Siemens 8 Rotary Handle L&T/Schneider/Siemens 4
Wiring 1mm to 10mm Copper Flexible ISI 1
Accessories MCB PVC Channel Etc. Reputed 1
1
-
304300
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements