Haryana Urban Development Authority Tender

... More
The HUDA has issued a formal invitation for competitive bids for the Haryana Urban Development Authority project, for Providing And Fixing Of Rain Shelter And Garden Benches Infront Of H No 1745 In Green Belt Sector 13 Bhiwani With Three Years Mtc And Defect Liability Period Free Of Cost in Hisar, Haryana, with an estimated contract value of Rs. 1,56,000. The bid opening date for this tender is 11-01-2023 and the last date for bid submission is 23-01-2023. Interested bidders for Haryana Urban Development Authority tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Haryana Urban Development Authority - HUDA Tender

Works
Civil And Construction
Civil Works Others
Eprocure
Opening Date11 Jan 2023
Closing Date23 Jan 2023
Tender Amount₹ 1,56,000 
Notes
Download

Costs

  • EMD

    ₹ 3,120
  • Document Cost

    ₹ 250
  • Tender Fee

    ₹ 1,180

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
11.5.4 12 mm cement plaster of mix 1:6 (1,cement, 6 fine sand).

6

456

76

... More
7.21.2 Brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in Cement mortar 1:6 (1 cement: 6 coarse sand).

3.5

13843

3955

... More
26.58.3 Cast Iron bench of 1800 mm length, 900 mm width, 450 mm seating height, sides made of cast iron. Seat and back shall be made of 10 strips of M.S. pipes 63 mm x 25 mm of 14 gauge with one M.S. Flat 25 x 10 mm welded at the centre, below and back of the seat and back rest. Spray painted with approved brand paint. Fixed by grouting with 1 :2:4 cement concrete (Minimum weight of each bench 105 kg). All materials required to be as per BIS specifications.

3

38427

12809

... More
4.8 Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead up to 50 m and lift up to 1.5 m All kinds of soil.

7

1106

158

... More
6.14.2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level:1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded stone aggregate 20 mm nominal size)

0.4

1736

4339

... More
11.97.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied@ 0.90 litre/10 sqm over an under coat of primer applied @ 0.80 litre/10 sqm of approved brand and manufacture.

22

1452

66

... More
13.29.1 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 13.29.1 In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete.

546

48594

89

... More
9.33 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

43.5

24534

564



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.