Deenbandhu Chhotu Ram University Of Science And Technology Tender

Supply, Installation, Testing & Commissioning of National Flag size 36 x 24 ft, made with reinforced super- strong nylon webbing on all 3 sides, rope/toggle sleeve & shiny kintted polyester, 160 GSM ( C ). (Base rate of cloth Rs 35/Sqft.) or Parachute fabric or equivalent. Make: THE FLAG COMPANY

Supply, Installation, Testing & Commissioning of TS-600 grade , 30 mm dia & 1200mm long foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates. (20 nos). Complete in all respects.

Supply, Installation, Testing & Commissioning of 135' high polygonal cross sections (twenty sided) Flag mast. Mast shaft shall be in 4 sections having thickness top 4mm, middle 5mm & bottom 6mm, hot dip galvanised having top dia 200mm & bottom dia 700mm and suitable for wind velocity as per IS 875 (180km/hr) along with shaft of size 1000 mm x 300 mm for maintanance and erection of the flag mast with the help of suitable equipment's and assembly of operating system.. It includes provision for a FRP ornamental finial LED single dome System and including PU Painting of Flag Mast shaft with a coating of etch primer, primer and PU paint. The Flag Mast shall be continuously tapered, polygonal cross sections (twenty sided) with the pulley box arrangement at the top & with 800mm to 1100mm overlaping. The LM6 Aluminum pulleys with bush bearing mounted through shaft shall be suitable to accommodate wire ropes and multi core trailing cable. The structure gives good visual appearance and is based on proven design confirming to TR-7, to give assured performance, reliability and service. The Masts are constructed from steel conforming to BSEN 10025 and cut and folded to form twenty sided section and is telescopically jointed and fillet welded. Complete in all respects. Make: Bajaj Electrical, BPP, Ventura, PE or equivalent approved by the Engineer-in-charge of work.

Removing & refixing shifting of sheet steel enclosures 2 pole/3 pole with earth plug and socket Suitable for incorporating single pole/triple pole MCB on wall/on existing pedestal complete with necessary connections etc. S.P.N enclosure for single pole MCB 10 amp.

Providing, laying & compacted WBM sub-base/base course including preparation and compacting of sub base and spreading of clean and crust aggregate to proper grade and camber including application of screening for interlocking, sprinkling of water and rolling with power roller as per MoRT & H specification clause 404. (5th adition) 2013 Grading No. I Material (63 mm to 45 mm size) with crushed stone screening of same material as coarse aggregate type ‘B’ of table 400-8 and binding material, in layers as per specification.

Supply, Installation, Testing & Commissioning of System for Raising Lowering of Flag. It shall have double drum winch, 6mm dia stainless steel wire ropes having AISI 316 grade. The breaking load of each rope is not less than 2350 Kg giving a factor of safety of more than 5 for the system at full load as per the TR-7 and integral power tool for the raising and lowering of Flag. Three phase, single speed, motor of rating suitable to hoist the flag mounted on adjustable plate to adjust the length of winch motor coupling chain is to be provided in base compartment. Mechanical torque limiter is to be mounted on motor shaft to stop transmission of motion from motor to winch in case of excess load and thus prevent the damage to winch and breakage of rope. Suitable control panel with 32A TPN MCB incomer, power tool control with 2 no. 9A contactors and raise lower push button, incoming 16 sq. mm and outgoing 4sq. mm terminals shall be provided for reversing operation of Power tool motor (2hp 3 phase) & to provide supply to the poles. . The box is constructed of 14 SWG CRCA sheet finished with two Coates of red oxide primer & grey enamel paint of shade 631 of IS 5. Motor Make: KIRLOSKAR, CROMPTON GREAVES, HAVELLS

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18-20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, , Lakha Red, Cat Eye or equivalent. Note: - The sample of granite stone shall be got approved from the Engineer-in-charge of work well in advance before execution at site of work.

Supply, Installation, Testing & Commissioning of 45W 3mtr high Led post with input voltage range 220-240v, minimum 4000k color temperature, Housing: Extrusion aluminium, Diffuser Tube: polycarbonate, class-I & all necessary accessories including wiring with all materials and labour, Complete as per the direction of EIC (IP 65). Make: Philips BGP151, equivelant model / specifications of Havells & Panasonic

Supply, installation, testing, connecting and commissioning of 240W LED flood light of following makes and model. The fixture is made up Hight efficiency,with range 140-240v mimimum lumen(In) 15000-25000 narrow beam white Color temperature, provided with heavy duty LED driver 200 watts with 30 Deg. Thermal management heat sink shall be part of the LED lamp. class-I & all necessary accessories including wiring with all materials and labour, Complete as per the direction of EIC Make: Philips BVP410 Tempo LED Lights, 160-240 W or equivelant model / specifications of Havells & Panasonic

Removing Kerb stone in Cement Mortar as per direction of Engineer-in-charge.

Supply, Installation, Testing & Commissioning of FRP ornamental finial LED single dome System and LED aviation lights are mounted on the lantern carriage to comply to the aviation norms where applicable. The connection for these aviation obstruction lights shall be made using 3C X 2.5 sq mm copper unarmoured cables. (Makes as approved by the Engineer-in-charge of work)

Supply and filling good earth (Tiba sand) including watering, compaction, royalty/compensation of earth etc. complete upto lead of 19 km as per HSR.

Supply and filling good earth ( Tiba Sand) including watering, rolling, compaction, royalty/compensation of earth etc. complete upto lead of 19 km as per HSR

Providing and fixing Granite 16-18 mm thick in skirting risers of steps, dados and wall facing (lining) and pillars laid on 12 mm thick cement coarse sand plaster 1:3 laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing including labour for fixing cramps, dowels and pins etc. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Lakha Red, Cat Eye or equivalent. Note: - The sample of granite stone shall be got approved from the Engineer-in-charge of work well in advance before execution at site of work.

Grading No. II Material (53 mm to 22.4 mm size) with crushed stone screening of same material as coarse aggregate type ‘B’ of table 400-8 and binding material, in layers as per specification.