Deenbandhu Chhotu Ram University Of Science And Technology Tender

Providing and fixing Drinking water counter made of soild acrylic surface which is combination of PMMA, MMA, filled with ATH and other pigments, binders, UV resistant chemicals, additives etc. which is nonporous, having seamless appearance, flexible to thermoform in many shapes or as per drawing/detail & shade/color, having low VOC, resistant to stains and chemicals and having class A Flammability rating. Sheet Size: 12 mm x 3680 mm x 760 mm weight of the sheet : 60 Kg. complete in all respect as per the satisfaction of Engineer in charge. Make : Corian (DU-point), Merino (Hanex), Tristone, Tranquil.

90 mm (bend)

Supply, erection, testing and commissioning of occupancy sensor for on/off Lights.(Model No. Philips LRM1071) Make;- Philips,Havells,Schneider (Detail Specification attached at annexuer-III)

cross tee

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit fo speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Make:- Havells (Model No. ES-50 Premium, white Colour) or equivilent in Crompton, Bajaj)

Door tee

b) 40mm dia.

Providing & fixing GreenlamSturdoVibrance Rage Toilet Cubicle (of following standard dimension which includes 600mm door size width) made of heat, bacteria, water, chemical, scratch, impact and anti bacterial resistant 12mm thick solid compact laminate panels tested by Shriram Test House.Finish of the compact laminate should be Suede / *Raw Silk, which includs doors, pilasters & intermediate panels finished with approved texture/shade as per the detail drawings & as per IS 2046 (Indian Standard) and as per fire retardant BS-476/97& EN:BS1D0standard.The compact laminates should have the density 1.35kg/cm3 and fulfilled the criteria of FSC and green guard gold certification and manufactured under EN438-2&3:2005 standard. 12mm thick compact board should be Moisture resistant, Impact resistant, termite resistant ,Scratch resistant ,Weather and climatic shock resistant. Make - Greenlam, Merino, Trespa or equivalent as per approval of Engineer in charge

Toilet Signage : Providing & Fixing of Toilet Signage on SS Brush Finish sheet of thickness 2-3mm and approx size 300mm X 150mm.

collars

Providing and fixing CP jali over floor trap 150 mm size of ISI specification of prince, supreme, finolex

Providing, storing, handling, shifting, installation, testing & commissioning of 15 mm dia CP pillar tap (PUSH type) for wash basin complete including cutting and making good the walls wherever required Make-Parry ware,Hindware,Cera.

b) Plain Floor Trap 100X100 outlet and with height raiser

Door tee

cross tee

Supplying, installation, testing & Commissioning of 2' X 2' falce ceiling LED Light fitting 31 Watt, IP-20, colour temp. 6500K, Lumens out put 3600 Lunens, Make:- Philips (Model No. RC380B LED36S-6500 G4 L60 W60 PSU 0D) or Equivilent in Crompton, Wipro. (Detail Specification attached at annexuer-I)

Providing and fixing stainless steel 450 mm long Grab Bar with 2 nos CP brass wall flange including cutting & making good the walls wherever required complete in all respect as per direction of engineer - in - charge . ( Shape of Jaquar AHS -1503 or equivalent in Roca, Kohler or Grohe )

cowls

cowls

c) P-Trap type Floor Trap 110 x 110 mm

Supply, installation, testing and commissioning of heavy duty Exhaust Fan metal body, model no. Havells, turbo force SP, size 380 mm, 900 rpm (ISI marked) Make- Havells/Crompton/Bajaj (Detail Specification attached at annexuer-II) c) 380 mm

Providing and fixing of starwhite vitreous chinaware over counter wash basin of size (56 x 41 cm) Hindware/Jaquar/Cera make having in compatibility with cat no. 10017 of Hindware (Jaquar/parryware) with CP brass waste assembly, PVC waste pipe quarter turn pillar cock long neck (foam flow) with CP junction cover/cap Cat No. 330002 of Hindware/Perryware/Jaquar make, CP wall fanges and rubber adapters for waste connection complete including CI/MS brackets duly painted, nuts washers, with all other necessary fittings and complete in all respect as per manufacturer's specfication and satisfaction of Engineer in charge including cutting and making good the walls and floor where ever required complete Make-Parry ware,Hindware,Cera, Jaquar

Providing and fixing CP cap (quality as required by Engneer in charge)

Providing and fixing in position granite stone partition large size 500 mm x 1200 mm of 18 mm thick urinal partitions of approved quality or colours including accessories like right angle bracket, SS screws and PVC wall plug etc. with all other necessary fittings and complete in all respect as per manufacturer's specfication and satisfaction of Engineer in charge including cutting and making good the walls and floor where ever required. (Customized as per drawing & design i.e. chamfering, Edge rounding and polishing etc.)

Providing and fixing in position best indian make beveled edge 5.5 mm thick looking mirror with powder coated aluminium moulded frame mounted on asbestos sheet and required cushion ground fixed in position by means of 4 nos. chromium plated brass screws and washers over rubber washers and rawl plug embeded in the wall or chormium plated brass clamps with CP brass screws as required by the engineer in charge including cutting and making good the walls etc. as per drawing & design complete in all respects as directed by Engineer -in-charge

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. Make- Finolex,Diplast,Prince a) 110 mm dia (Wall Thickness - 3.2 to 3.8 mm)

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as required.Make- Finolex,Diplast,Prince a) 32 mm dia.

Providing and fixing chicken wire mesh 200mm at the junction of masonary/concrete work and scaffolding in bends,jambs cornices,drip mould and edges etc

b) 50 mm dia.

Supply,Installation of integral LED 2ft luminarie with extruded aluminium housing with PC cover.The luminarie should have a color consistency SDCM5,CRI80 and CCT of 4000/6500K The luminarie shall be compilant with IP20 classification.The fixture should have a minimum system efficacy of100 lumens/watt and a minimum system lumen output of 1200 lumen and a maximum system wattage of 12 watts.The luminarie shall be designed so as to ensure a lumen deprication of upto 30% over 50K burning hours @ design ambieent temp 45deg C.The electronic driver used shall have a power factor0.95,THD10%.The fixture should comply with the parameters as per ISI 0322.The LED driver should comply to IEC 61000-3-2, 2009 for Harmonics,IEC61347-2-132006 in conjuction with IEC61347-1 ed.2.0,2007 for Electrical safety,IEC62384 ed 1.1,2011 for perfofmance and IEC 61547 ed 2.0, 2009,CISPR-15 for EMI.Manufacturer shall have inhouse Lab. approved by NABL or ministry of Science of Govt,of india.LM79 & LM 80 reports need to be submitted from a NABL/ UL accredited lab to verify. BN 021 LED12S 6500 PSU GR S1 Make- (Crompton, Philips, Wipro)

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects.Make- Finolex,Diplast,Prince a) Multi Floor Trap (5" Ht) with height raiser and branch saddle strip of 50/75 mm outlet