Dakshin Haryana Bijli Vitran Nigam Limited Tender
... More
The DHBVN has issued a formal invitation for competitive bids for the Dakshin Haryana Bijli Vitran Nigam Limited project, for Construction Of Scada Cum Complex Sec 52 Gurugram in Gurugram, Haryana, with an estimated contract value of Rs. 25,99,69,735. The bid opening date for this tender is 10-04-2023 and the last date for bid submission is 03-01-2024. Interested bidders for Dakshin Haryana Bijli Vitran Nigam Limited tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Dakshin Haryana Bijli Vitran Nigam Limited - DHBVN Tender
Opening Date10 Apr 2023
Closing DateCancelled
Tender Amount₹ 25,99,69,735
Costs
EMD
₹ 51,99,400Document Cost
₹ 5,900Tender Fee
₹ 1,000
Summary
Construction Of Scada Cum Complex Sec 52 Gurugram
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_HBC_272489_1Tender No
2023C193B131 0AA7 4534 B44F 3C7C176C5F2E1035DHBTender Authority
Dakshin Haryana Bijli Vitran Nigam Limited ViewPurchaser Address
-Website
http://https://dhbvn.org.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
DSR 11.6 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 150MM DIA
16
-
-
... More
Supply, Installation, Testing and Commisoning of 20 W LED Tubelight 1200mm suspended with all accessories
154
-
-
... More
DSR VRF 2.8 Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. - 3.2TR
10
-
-
... More
Senior Workstation of /HNI/GEEKAN or equivalent make as per satisfication of engineer - in - charge Gable End W600XHT. 725X25 mm THICK 4.
10
-
-
... More
GLASS FILM Providing and Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-blasting effect on glass with customised designs, thickness of 2 mil (0.05mm) without adhesive and 3mil (0.8)with adhesive having minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors) must be endorsed by 3M India Limited Architectural Market Department. Contractors payment wouldn`t be released until and unless he/she produces orginal warranty certificate from the manufacturer.
125.46
-
-
... More
Exhaust Air Fans - Axial Flow Fan (Fire Rated 250 deg for 2 Hrs.) - Supply, installation, testing and commissioning of Direct drive Tube Axial fans complete with Hot dipped Galvanised Steel Casing with spun flanges, adjustable pitch die cast aluminium impeller (Hub and Aerofoil blades) and IE3 motors. Casing position shall be as per the job requirement and shall be marked on the fan assembly.The complete fan assembly with its casing, impeller and motor ( not only motor or one of the item ) shall be sourced from one manufacturer and certified and tested as per EN12101-3-2015, 250 degree for 2 Hrs operation. CE mark and AMCA certification must.Make : Systemair - 15000 CFM, S.P 20 mm WG
2
-
-
... More
DSR 11.4 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80MM DIA
10
-
-
... More
Water proofing at side face of retaining walls in contact with ground, Membrane coating type with protective board as per manufacture`s recommendations as detailed in specifications
127.35
-
-
... More
DSR 2021 ITEM 21.3.3 Providing and fixing 12mm thick toughened glass in Aluminium frame work including sealing with EPDM / Neoprene gasket all complete as per the architectural drawings and the directions of engineer-in-charge
142.21
-
-
... More
Supply, Installation, Testing and Commissioning of loaded 24 port CAT6 jack panel for CAT6 cable termination at rack end.
Approved Makes: Belden/Siemon/Panduit/Der Wiser
10
-
-
... More
Modular Kitchen - Overhead storage wall units:
Providing and fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient number of drawers made of 18 mm thk. ISI Marked comm. ply . all ply to be laminated with 0.8 mm laminate.All shelves should be supported on approved quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia shall be at least 18mm thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high gloss acrylic of approved make- Rehau,Ornare,Senosan. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and raw plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be considered for measurement and payment. Cabinet boxes size would be varies from 400X560X710MM to 1000X560X710MM (approx.) and join together as per site requirements etc.
13.93
-
-
... More
Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/channel and making necessary connection complete in all respect up to the entire satisfaction of the Engineer-in charge of the work.
50 pair
450
-
-
... More
DSR 5.5 Incomings 630A, 50kA 4 Pole MCCB, Ics=100% Icu Rating Digital Voltmeter 0-500V with selector switch
Ammeter (0-630 A) with selector swtich and CTs etc.
LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps
Set of Copper Bus Bar 800Amps
Outgoings
(Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)
Main Fire Pump
200 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/ Delta starter suitable for 75 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/ manual/ OFF operation. - 2 sets
Jockey Pump
100 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor
complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets
Diesel Engine Control
Control for diesel engine comprising -
Automatic/ Manual selctor switch and 3 attempts starting device, timers and relays as required, push buttons, start/ stop in manual mode
Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication
Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter
All standard relays and accessories for automatic operation of diesel engine
System Controller
Designing, Supply, Installation, Testing and
commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation
window for fault indication, complete as per
specification
1
-
-
... More
Supply Installation, Testing and Commisioing of Handicap Toilet special fixtures to the complete satisfaction of the engineer in charge - SITC of Grab Bar vertical swing white(Ref. Jaquar Cat. No. WAC-WHT-BG0800 OR approved equivalent)
5
-
-
... More
DSR VRF 2.4 Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. - 1.6TR
13
-
-
... More
LINEAR WORKSTATION (MAX-1)
LiNEAR WORTOP Size - W 1200 X D 600 X TH25mm PLPB
65
-
-
... More
DSR 25.3 Supplying, installation, testing and commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. - 1200 MM
600
-
-
... More
CONTROL PANELS - Supply of Electrical cum PLC Panel for Basement B1 with MCB feeders with starters for 7 nos dual speed 3 phase Jet Fan fans of 1.7/0.34 kW each,MCCB feeders with starters for 2nos. Exhaust fans single speed of 11 Kw and 1 No Fresh Air Fan of 11kw(optional). controlled by nos-7 nO CO Sensors, with suitable incomer MCCB, metering panel, aluminium bus bar , PLC logic controller with necessary internal control wiring etc
1
-
-
... More
Supply and fixing of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium Conductor Cables : Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively and ISI marked. - 3.5 C x 400 sqm XLPE cable
76
-
-
... More
DSR VRF 5.8 Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 28.58 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
100
-
-
... More
Supply and fixing of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium Conductor Cables : Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively and ISI marked. - 3.5 C x 300 sqm XLPE cable
150
-
-
... More
DSR VRF 2.9 Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. - 3.6TR
1
-
-
... More
Supplying, installing, testing and commissioning of CAT 6 Patch panel with transmission performance compliance with the ANSI/TIA/EIA 568C.2 standard. Should allow for a minimum of 200 re-terminations without signal degradation below standards compliance limit.Should have self-adhesive, clear label holders and white labels with the panel Panel should be of 1U height with 24 port pre-loaded IO. IDC: Suitable for 22-26 AWG stranded and solid wire compatible with both 110 and Krone punch down tools, Operating Life: Minimum 750 insertion cycles support operating Temperature from -20° to plus 70°
75
-
-
... More
Analysis of DSR 2021 ITEM 11.27
Providing and fiixng 18 mm thick Granite stone in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete.
382.7
-
-
... More
Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/channel and making necessary connection complete in all respect up to the entire satisfaction of the Engineer-in charge of the work. - 20 Pair
100
-
-
... More
Workstation Chairs
Medium Back Chair , PP Arms, Nylon Base, Gas lift , Net Back, Seat febric Tapestry of geeken or equivalent make as approved by engineer-incharge
100
-
-
... More
DSR 7.3 Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 40 MM DIA
450
-
-
... More
DSR VRF 5.9 Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 31.8 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
100
-
-
... More
Lifting, Shifting, Supply, Installation, Testing and Commissioning of Interconnecting `Y` and `T` Joints i.e. Refnet Joints/Header with Insulation for refrigearnt piping (Make : DAIKIN, TOSHIBA, O GENERAL, MITSUBISHI) - Y JOINTS
118
-
-
... More
Supply and fixing of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium Conductor Cables : Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively and ISI marked. - 3.5 C x 50 sqm XLPE cable
117
-
-
... More
DSR 7.7 Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100 MM DIA
100
-
-
... More
Supplying and Fixing of battery operated illiminated `EXIT` signage, with 2hrs power Battery backup complete as required.
32
-
-
... More
DSR 3.12.1 Supplying, installation, testing and commisioning of following capacity Plug In/ tap off box on the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick sheet steel enclosure (IP54) duly powder coated with MCCB complete etc. as required - 125 A 15kA SC for 1 sec
2
-
-
... More
Extra for providing and fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps.
91
-
-
... More
Backer Rod SOFTEX Or similar
These are round, flexible lengths of foam that are used as a “backing” in joints or cracks to help control the amount of sealant/caulking used and create a back stop. The material shall not wick moisture making it suitable for joints with a high presence of water or dampness. Sealants, caulking or other chinking materials should stick more easily to backer rods which should have a better bonding surface area.
552
-
-
... More
DSR 12.6 Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 150MM DIA
16
-
-
... More
Supply and placing centre table in position with sizes
1200mm(W)x600mm(D)x400mm(H) with top made of 10mm thick glass top supported on SS Studs on understructure of Prelaminated Particle Board. The Table shall have another shelf at lower level of HNI or Equivalent make The work shall be carried out as per the instructions received from engineer-incharge.
30
-
-
... More
Providing and fixing ISI Marked of approved make Fire Extinguishers complete with all accessories as per manufacturer`s specifications. - c) ABC dry powder stored pressure type 6 kg capacity (IS:15683).
24
-
-
... More
DSR VRF 2.6 Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. - 2.4TR
14
-
-
... More
MD Cabin Table: Providing and Placing Cabin Table `STELLAR` of HNI/Geeken Make or equivalent make to entire satisafction of engineer in charge . Main Table 2700mmL x 1050mm D x 750mm Ht and Side Storage 1200mm L x 450mm D x 750mm Ht made of 25 mm thick Pre Laminated Particle Board with matching 2 mm thick edge Banding. Modesty panels are in 18mm thk Prelaminated finish. The Table tops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling . Table supports are combination of Metal poles and Gable ends. Access Flap with Cable tray and switch mounting plate is provided on side table for wire management. Side Storage is a combination of hinged door unit and 3 drawer unit . Back storage unit of size 2700mm L x 450mm D x 750mm Ht is a Hinged Door unit and is made of Prelaminated particle Board 18mm thick with Matching PVC lipping. SS handles 220mm L are provided in storages. Main Table has a 3 drawer pedestal unit with castors and pedestal unit has size 400mm L x 450mm D x 680mm Ht made up of 18mm thk. Prelaminated Particle Board Caracass having central locking system . 2 Drawers are with roller slide mechanism and Filing Unit is with Ball bearing slides. Warranty 5 Years .
1
-
-
... More
Senior Workstation of /HNI/GEEKAN or equivalent make as per satisfication of engineer - in - charge L- Worktop Size - W 1200 X D 600 X TH 25 mm PLPB
10
-
-
... More
SITC of cables 1.5 meters VGA plus audio etc all compelte .
20
-
-
... More
Conference Room table - 5150mm L x 4150mm L x 750mm D x 750mm Ht - Providing and placing Meeting Room table in `U` Shape . Table Tops – Available in standard modules 1500mm L x 750mm D / 1350mm L x 750mm D / 1200mm L x 750mm D / 1050mm L x 750mm D / 900mm L x 750mm D /750mm L x 750mm D , made of 25mm thick Prelaminated Partlice Board. The Table tops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling .Understructure – Legs made of 18mm thick Prelaminated Particle Board panels interconnected with 18mm thick pre-laminated modesty panels, with height adjustable levelers to take care of uneven floors. Wire Management – Concealed wire management to take care of basic wiring requirements both horizontally and vertically. Cable Tray is mounted on the inner side of modesty panel for horizontal wire carrying. Vertical wire management is through flexible vertical wire manager at one place . Slots for Mounting Data and Electric Switches and Sockets are provided on Cover Section of Cable Tray. Standard table top height – 750mm. Designed for Flexibility through modular Construction, Provision for easy wire management, Upgradeable / reconfigurable for future needs. Corners are Provided in 25mm thickness . Corners are supported on 63.5mm Painted Metal Pole with Leveller for Height Adjustment.
1
-
-
... More
Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at the intersection of raceways supplied completely with base and cover plates, height adjustable junction box 65-90 mm including all accessories complete in all respect as per the directions of engineer-in-charge - (b) 225 x 225 x 65-90 mm
30
-
-
... More
DSR 7.1 Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 25 MM DIA
1350
-
-
... More
Senior Workstation of /HNI/GEEKAN or equivalent make as per satisfication of engineer - in - charge Partition W 1500 X H1200 X TH60mm. Front partition (pin- UP and W/b)
10
-
-
... More
Supply , Installtion , Testing and comissioning of Face Plate should be Single Gang square plate, 86mmx86mm, should have Write on labels, The Faceplates should have inbuilt shutters which are compatible with any standard colored keystones jacks. The Faceplates are available in one, two and four port variants.
200
-
-
... More
DSR VRF 1.14.11 Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. - 4 x 16 sq mm plus 2 x 6 sq mm earth wire
1300
-
-
... More
LINEAR WORKSTATION (MAX-1)
Consisting 60mm thick aluminium extruded power coated panel based partition of height 1200 mm having provision of fabric/soft pin up board / white marker, raceways on two level for data and electrical, 25mm thick PLPB work top with pvc edge banding on all sides, top supported by 25mm thick pvc edge banded gable end . Partition W 1200 X H1200 X TH60mm. Front partition (pin- UP and W/b)
65
-
-
... More
DSR 21.1 Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendant type
850
-
-
... More
Supply, installation, testing and commissioning of Direct drive Tube Axial fans complete with Hot dipped Galvanised Steel Casing with spun flanges, adjustable pitch die cast aluminium impeller (Hub and Aerofoil blades) and IE3 motors. Casing position shall be as per the job requirement and shall be marked on the fan assembly.The complete fan assembly with its casing, impeller and motor ( not only motor or one of the item ) shall be sourced from one manufacturer. Fan mut be AMCA certifeid for Air and sound both.Make : Systemair - 20000 CFM, S.P 25 mm WG
2
-
-
... More
Modular kitchen - Under counter storage cabinets:
Providing and fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient number of drawers made of 18 mm thk. ISI Marked comm. ply , all ply to be laminated with 0.8 mm laminate.All shelves should be supported on approved quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia shall be at least 18mm thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high gloss acrylic of approved make- Rehau,Ornare,Senosan. The cabinet boxes of floor units will be supported by 100mm height vertical adjustable legs (Hettich make) which will be covered with PVC skirting (Rehau or equivalent make ) in brushed aluminum finish attached by hardware of skirting. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and rawl plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be considered for measurement and payment. Cabinet boxes size would be varies from 400X560X710MM to 1000X560X710MM (approx.) and join together as per site requirements etc.
13.89
-
-
... More
Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at the intersection of raceways supplied completely with base and cover plates, height adjustable junction box 65-90 mm including all accessories complete in all respect as per the directions of engineer-in-charge - (a) 300 x 300 x 65-90 mm
10
-
-
... More
Supply and fixing of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium Conductor Cables : Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively and ISI marked. - 4 C x 16 sqm XLPE cable
115
-
-
... More
DSR VRF 2.10 Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. - 4.0TR
23
-
-
... More
LINEAR WORKSTATION (MAX-1)
Key Board Tray - Laminated
65
-
-
... More
Supply and Installation of Green Pro Certified Luxalon Aeroscreen 450 perforated and Roll-formed Louver Fixed Vertical System consists of aluminium extrusion with a wall thickness of min 1.8 mm fin and a 0.7-0.9 mm thickness preformed Aluminium skin made up of alloy AA 3105 Series,H14 / H44 with Fixing accessories of Sliding U – Profile, Fixation Disk, Fin Suspension and end caps for fixed system. The Aeroscreen System should have roll-formed and perforated fins. Aeroscreen Single Skin has perforation with 2.4mm round holes, 20.9 % open surface area and alternative perforations on request, While ideally controlling heat gain and light, the fins also preserve views to the outside and broaden the occupants’ visual space. The elegant and transparent Aeroscreen System acts perfectly well with the sedate appearance of a building, creating a beautiful look with unique charm. The module C/C of fin for fixed system will be 500MM and the length of the fin shall be determined based on the wind load calculation and deflection and upto a maximum of 3500MM. The factory made Luxalon Aeroscreen 450 mm fin will be fixed on both ends to suitable Installation frames of MS sections/Aluminum provided by Client. The installation frame shall be fixed mechanically to concrete structure with MS or Aluminum brackets. The erected substructure shall be aligned within the tolerances of ± span/1000 of plumb line and level with a non-cumulative tolerance of a maximum of 2 mm. The louver Fin skin Surface Coating: Front side Skin: Coil Coated with PVDF in approved colour: Back side Skin: With standard Primer. Alum. Extrusions: All extrusions are Natural anodized.
138.51
-
-
... More
Providing and Installation of Baffle ceiling / Open Cell Ceiling system comprises of 50 mm x 100 mm (50 mm width and 100 mm Height) U Shape panels in RAL color finish( in case of baffle ceiling). Panels shall be made of 0.5 mm thick galvanized steel after Powder-coated and length up to 4000 mm. Panel shall be high corrosion resistance and good color stability. Centre to Centre panel gap will be 150 mm. Panels are fixed on to roll formed carriers 20 mm wide x 40 mm deep out of 0.80 mm G.I sheet Powder-coated color with cutouts to hold the panels in module of 50 mm at maximum 1200 m c/c. Carriers are suspended from the roof or truss by 6 mm dia. galvanized steel wire rod hanger with special height adjustment suspension clip at max. 1200 mm c/c. Hangers are fixed to the roof by ‘J’ hooks or ceiling brackets and nylon inserts. Panels are factory cut in lengths up to maximum 4.0 m to suit site dimensions or shop drawings. Top cap and side cap are used to cover the edges of the panels.
766.83
-
-
... More
DSR 17.2.6 Supplying, installation, testing and commisssioning of intelligent addressable programmable sounder complete as required.
24
-
-
... More
Supplying and drawing of exceeds the requirements of Category 6 Unshielded Twisted Pair 4 pair cable shall be compliant with ANSI/TIA/EIA-568-C.2 channel perfomance and IEC/ISO 11801, Construction: 4 twisted pairs separated by internal X shaped, 4 channel, polymer spine / full separator. Half shall not be accepted. The 4 pair Unshielded Twisted Pair cable shall be ETL Verified. Conductor Solid bare Copper and Jacket LSZH , Blue colour with RIP cord, Bending Radius should be 8xCable Diameter while pulling and Pulling Force: 11.5 Kg, Cable should support operating Temperature from -20° to plus 70°C
20000
-
-
... More
DSR VRF 5.4 Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
900
-
-
... More
Supply and fixing of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium Conductor Cables : Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively and ISI marked. - 4 C x 25 sqm XLPE cable
119
-
-
... More
Supply, Installation, Testing and Commissioning of CAT6 information outlet (I/O) for camera at user end.
Approved Makes: Belden/ Siemon/ Panduit/ Der Wiser
40
-
-
... More
DSR 7.8 Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 150 MM DIA
400
-
-
... More
Back Storages
Storage Size W1000XD450XHT.1200MM of geeken or equivalent make as approved by engineer-incharge
30
-
-
... More
DSR 17.3.7 Supplying, installation, testing and commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required.
8
-
-
... More
DSR VRF 2.2 Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. - 1.0TR
1
-
-
... More
DSR 3.11.4 Supplying, installation, testing and commisioning of following capacity End Feed Unit for the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick steel sheet enclosure (IP54) duly powder coated with provision of MCCB/ACB (but without MCCB/ACB) complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required - 500 A 35kA SC for 1 sec
1
-
-
... More
Table Top 25mm thick PLPB work top with pvc edge banding on all sides, top supported by 25 mm Thick Lam Gable End and front of side lam. Modesty ht 600mm . Thick PLPB. As per dwg. of geeken or equivalent make as approved by engineer-incharge Partition W 900 X H1500 X TH60mm. Side partition b
5
-
-
... More
MD Main Chair: Verta HB or approved make as per satisfication of engineer-in-charge with Headrest
High Back With Headrest
Fabric Upholstered and Leatherite Upholstered
Weight activated synchronize w/ Seat Depth Adj
4D Adj. Black PU Armrests 4D
With Lumbar Support Adjustment
Black Back Frame
Black Y Support
Polished Aluminium Base
WARRANTY: 10 Years from the date of invoice
2
-
-
... More
SITC of speaker cable etc all complete.
500
-
-
... More
`Finishing walls with graite atelio exterior paint of required shade: Natural granite-based finish. Modified pure acrylic emulsion based, reinforced by Granite aggregate. Formulated to withstand humidity, rain and hot climate. It Contains silicone additive for breathability and water resistance. It contains anti-fungal and antibacterial additives.`
Granite is one of the most durable stones used in artistic and architectural applications, including outdoor sculpture. Granite has 7 Hardness on Mohs Hardness scale. Granite is defined by the American Society for Testing and Materials (ASTM) as a `visibly granular, igneous rock generally ranging in color from pink to light or dark grey, and consisting mostly of quartz and feldspars, accompanied by one or more dark minerals`.Marble and limestone, granite is not an acid soluble stone and is much more resistant to the effects of acidic solutions, rainwater or cleansing agents. In general, igneous building stones, such as granite, have a more inert composition: show much lower rates of deterioration: have lower water absorption, and are harder than marbles, lime stones and sandstones.
945.82
-
-
... More
Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at the intersection of raceways supplied completely with base and cover plates, height adjustable junction box 65-90 mm including all accessories complete in all respect as per the directions of engineer-in-charge - (c) 150 x 150 x 65-90 mm
150
-
-
... More
DSR 17.2.1.1 Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. - Ten Loop Panel.
1
-
-
... More
Providing and supplying High back chair withadjustable arm rest,synchro mechanism, quilted upholstery, lumbar support etc. of Godreg/HNI or approved make as per the satisfication of engineer - in - charge
1
-
-
... More
DSR VRF 2.5 Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. - 2.0TR
33
-
-
... More
Providing and supplying HNI Model Quip Medium Back Chair .This is a Medium back chair with Mesh Back with back tilt tension adjustable . The chair mesh is available in 6 different colours ( Green / Ruby / Cinnamon / Magenta / Indigo / Black ) with matching or contrast seat fabric according to the choice of the client . The chair has Adjustable Lumber Support . The Chair has Nylon base with 60 mm twin wheel castors .Chair comes with 1-D adjustable armrests . Seat size is 490 mm W x 435 mm D and the Chair Height 975 mm - 1070 mm . Overall size of the chair is 630mm W x 550 mm D x (975 mm- 1070mm) H . The PU foam used for chair seat is fire retardant . The chair has Pneumatic Gas Lift with Stroke=85 mm . Chair carries a warranty of 5 years.
45
-
-
... More
Supply, Installation, Testing and Commissioing of LED Pendant luminaire with LED (Light Emitting Diode) system power: 28W, 120 LM/W system efficacy, colour temperature of 4000K, neutral white, 230V constant current driver, 70% of luminous flux after 50,000 operating hours, energy efficient LEDs, CRI)80, luminous flux of 3360 lm, MacAdam 3, T.H.D=10%, driver efficiency = 88%, surge protection of 2.5kV, direct light emission, Aluminium body, polyester white powder coat applied over a 5-stage pre-treatment, Prismatic diffuser for glare-free uniform light, UGR(19, Electronic control gear Protection class I, IP40, L =1195mm, B = 295mm, H = 67mm, PH = 1500mm
596
-
-
... More
DSR 17.2.10 Supplying, installation, testing and commissioning of addressable fire control module complete as required
4
-
-
... More
DSR VRF 2.7 Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. - 2.8TR
13
-
-
... More
DSR 17.2.3 Supplying, installation, testing and commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.
8
-
-
... More
Lifting, Shifting, Supply, Installation, Testing and Commissioning of Interconnecting `Y` and `T` Joints i.e. Refnet Joints/Header with Insulation for refrigearnt piping (Make : DAIKIN, TOSHIBA, O GENERAL, MITSUBISHI) - HEADER
20
-
-
... More
Supply and Planting Monstera plant having 3-4 ft height complete.
60
-
-
... More
Supply of full soil fill conical shaped planters of make : vaso eco, model no: c-series: of specified volume and dimensions in stone finish or equivalent. planters to be indigenously made by rotational moulding, with homogeneous recyclable, industrial grade polymer-resin mix, and textured surface. planters should have an integrated water outlet hole and plug, single layered peel-proof construction, light weight, rust proof, uv stabilized, anti-frost feature without any joints, and easy to clean. planter supplier must give 1 year warranty against any fading or cracking for both indoor and outdoor use. green plant and laying is extra. potting instructions as per company catalogue. - C-2420 61 (D) X 51(H) CM : V- 100 LTR
130
-
-
... More
Table Top 25mm thick PLPB work top with pvc edge banding on all sides, top supported by 25 mm Thick Lam Gable End and front of side lam. Modesty ht 600mm . Thick PLPB. As per dwg. of geeken or equivalent make as approved by engineer-incharge C Type wall Channel
5
-
-
... More
Sealant
Low modulus polyurethane sealant. Should be durable and flexible. Should be unaffected by normal weathering conditions, such as rain, UV radiation, snow, atmospheric contamination and pollution etc.
276
-
-
... More
ALUMINIUM SKIRTING : Supply of 100 mm `DMC` Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish. Thichness 1.30 to 1.50 mm. Designed to conceal screws. Seamless finish. Complete with
Rubber/ PVC Jointers and Gasket.
300
-
-
... More
DSR 17.3.2 Supplying, installation, testing and commissioning of 1.5/3/6W ceiling speaker complete as required.
200
-
-
... More
Supply, Installation, Testing and Commisioning of Machine Room Less 10 passenger (680 kg) lift having contract speed of 1 MPS servicing different floors in the exitisting lift shaft as per the detailed specifications enclosed as under 1. Travel 30 meters ( approx).
2. Stop and opening = 8
3. Controller : AC variable voltage and and variable frequency 4. Automatic rescue device complete with dry mentainance free batteries as required.
5. Operation : microprocessor based single automatic push button/ without attendant.
6. Power – 415 v, 3 phase , 50 hz , 4 wire system .
7. Type of doors A – Car : power operated , centre opening horizontal sliding stainless steel scratch proof( moon rock finish)
B – Landing Doors : MS doors finished with spray painting of approved shade .
• A hand rail not less then 600 mm long at 900 mm above floor level to be fixed adjacent to be control panel on the lift car.
• Voice announcement system in the car to announce the position of the elevator in the hoist way as the car passes or stop at a floor served by the elevator.
• Comprehensive maintenance of lift which include routine, preventive and break down maintenance for period of three year including repair/ replaced items after completion of one year guarantee period.
4
-
-
... More
Fresh Air Fans - Axial Flow Fan (Non-Fire Rated) - Supply, installation, testing and commissioning of Direct drive Tube Axial fans complete with Hot dipped Galvanised Steel Casing with spun flanges, adjustable pitch die cast aluminium impeller (Hub and Aerofoil blades) and IE3 motors. Casing position shall be as per the job requirement and shall be marked on the fan assembly.The complete fan assembly with its casing, impeller and motor (not only motor or one of the item) shall be sourced from one manufacturer. Fan mut be AMCA certifeid for Air and sound both.
Make : Systemair - 15000 CFM, SP 20 mm WG
2
-
-
... More
Supply, Installation, Testing and Commissioing of COB based surface mounted/pendent downlight, system power: 10W, 110 Lm/W, luminous flux of luminaire 1100lm, colour temperature of 4000K, 230V constant current driver, 70% of luminous ?ux after 50,000 operating hours: energy e?cient LEDs, direct light emission, housing in aluminium, round, polyester Silver powder coat applied over a 5-stage pre-treatment, aluminium reflector, 50x80 elliptical beam, Electronic Control Gear, Protection class I, IP20, Ø = 100 mm, H = 165 mm
164
-
-
... More
DSR 7.2 Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 32 MM DIA
1200
-
-
... More
Neoprene pads of thcikness 5mm between column and beam junction to be placed after erection of column and before placing the beam over it
222600
-
-
... More
Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with required suitable number of GI couplers for joining raceways and fixing GI brackets and all accessories complete in all respect as per the directions of engineer in charge (E) 75mmx38mm (GI)
97.9
-
-
... More
Supply, Installation, Testing and Commissioing of Recessed downlightwith HPE (High-Performance Efficiency) with LED (Light Emitting Diode), system power: 12 W, Luminous flux of luminaire 1320 lm, 110 LM/W system efficacy, Colour temperature of 4000 K, Neutral white, CRI ) 80, 230V constant current driver, 70% of luminous flux after 50,000 operating hours: energy-efficient LEDs, direct light emission, housing in die-cast aluminium, Polyester powder white coloured coat applied over a 5-stage pre-treatment trim, prismatic diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) wiring, Electronic control gear, Protection class II, IP 40, Ø = 175 mm, DA(Ø) = 160 mm, H = 59 mm
701
-
-
... More
Providing and fixing 4 mm thick glass door of size 2.1 m x 0.9 m with anodized aluminium frame of size 0.10 x 0.05 M with centre opening for fire hose cabinet. Suitably marked on the outside with the letters `FIRE HOSE` including locking arrangement. All aluminium work to be in Red P.O. colour.
16
-
-
... More
DSR 16.12.2.1 Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. - Thickness 0.63 mm sheet
100
-
-
... More
Jointing and Handling Consumables Threaded Inserts for Propping-Piekko/Halfen or similar and Dash Fasteners
600
-
-
... More
SINGLE GLAZED TOUGHENED GLASS PARTITIONS-with SYSTEM-50 FRAME PROFILES: Supply and installation of Aluminium Framed Glass Partition for Access and Cabin System for minimal frame, room dividing solutions. Single glazed mullion free demountable glass partition using Toughened/ Laminated glass in proprietary natural anodised/Black aluminium sections ALT 50 of size 50mm x 30mm with Concealed sealing (No visible Gaskets/Seals) with acoustic rating of Minimum 32 db with third party test certificate. The profile will have Carpert Groove at the Bottom on both sides for accomodating max. 8mm carpets. THe Glass to be fixed with help of Proprietary Stability GRIPPER Clamp to have a stable system. It should consists of intermediate slim junction profiles for Glass to Glass vertical joints, 90 Degree L Junction and T Junction profiles suitably to be used as per room configuration designs.No VISIBLE Clip Lines to provide clutter free view at both side of section. The Glass to be Offset mounted towards outer edge leading to minimum aluminium frame on one side. Optional Profile Bottom Seal pair for additional accoustic. Glass thickness - 10( LSG).shall be included in the product.
139.39
-
-
... More
DSR 18.1 Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal
21
-
-
... More
DSR VRF 1 Supply Installation, Testing and Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V plus /- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 . - NOTE: The rate has been defined as `Per HP`.
360
-
-
... More
Supply Installation, Testing and Commisioing of Handicap Toilet special fixtures to the complete satisfaction of the engineer in charge - SITC of Grab Bar Left/Right 90 angle, White (Ref Jaquar WAC-WHT-BAD090
5
-
-
... More
Supply, installation, testing and commissioning of high performance 70W LED street light, with connectors all duly wired , connection and wiring from junction box with 3# 2.5 sqmm copper wires, Mounted on 6.0 mtr. Pole
20
-
-
... More
MD Visitor Chair / Round Meeting table chairs/ Executive chairs of approved make as per the satisfication of engineer - in - charge
8
-
-
... More
Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with required suitable number of GI couplers for joining raceways and fixing GI brackets and all accessories complete in all respect as per the directions of engineer in charge (A) 300mmx38mm (GI) - 3 compartment
50
-
-
... More
Water proofing below foundation membrane type self adhesive with/without protection screed /and as appliciable as per manufacturer`s recommendation as detailed in specifications
940.23
-
-
... More
Senior Workstation of /HNI/GEEKAN or equivalent make as per satisfication of engineer - in - charge Fixed drawer unit w400xd450xht.725mm
10
-
-
... More
Supply and Installation of Hunter Douglas Terracotta pure mined clay tiles 16mm/18 mm thickness (Length: 1200 mm, Height: 300 mm). The tiles would-be back ventilated, with self-draining open joint system. Tiles shall be double-leaf construction and have labyrinth top and bottom returns to prevent easy water access behind tiles. Water absorption to be in between 3% to 6% conforming to ISO 10545 - 3, average bending tensile strength of tile =18mm shall be = 4500N conforming to ISO 10545- 4, Freeze / Thaw resistance conforming to ISO10545-12, Chemical resistance conforming to ISO 10545-13, Modulus of rupture shall be =16MPaconforming to ISO 10545-4, resistance to thermal shock shall be conforming to ISO 10545-9,Chemical resistance shall be no less than ULB level conforming to ISO 10545-13, Resistance to stains shall be conforming to ISO 10545-14. The tiles shall be of Natural Brick Red Terracotta Color and natural finish. The tolerance allowed in length is ± 1mm, height of front side is ± 2mm, height of back side is plus 2mm and - 3mm, thickness is ± 1.5mm, straightness of side is ± 2mm, vertical flatness is ±2mm, diagonal flatness is ± 2mm as per ISO10545-2. Aluminum support system: The support system consists of extruded Anodized Aluminum vertical Full T-and Half T Tracks of Alloy 6063T5.The dimension of T-Tracks would be 102X53X2 mm and maximum length of 5000 mm. A vertical black PVC gasket (max. length 5000 mm) would be slid on the T-Track between two tiles at vertical joint for proper alignment and extra support.
977.23
-
-
... More
SITC of HDMI cables upto 1.5 meters M2M etc all complete .
50
-
-
... More
Supply of full soil fill conical shaped planters of make : vaso eco, model no: c-series: of specified volume and dimensions in stone finish or equivalent. planters to be indigenously made by rotational moulding, with homogeneous recyclable, industrial grade polymer-resin mix, and textured surface. planters should have an integrated water outlet hole and plug, single layered peel-proof construction, light weight, rust proof, uv stabilized, anti-frost feature without any joints, and easy to clean. planter supplier must give 1 year warranty against any fading or cracking for both indoor and outdoor use. green plant and laying is extra. potting instructions as per company catalogue. - C-1613 - 40 (D) X 33(H) CM : V- 27LTR
60
-
-
... More
Lifting Inserts-Piekko/Halfen or similar
Insert to be easy to install, should be able to develop sufficient bond with concrete to ensure safe lifting during handling at yard and site.
5T to 10T
322
-
-
... More
Supply, Installation, Testing and Commissioing of Recessed downlight luminaire with HPE (High-Performance Efficiency) LED (Light Emitting Diode) system power: 8 W, Luminous flux of luminaire 760 lm, Colour temperature of 4000 K, Neutral white, SDCM 3, CRI ) 80, 230 V constant current driver, 70% of luminous flux after 50,000 operating hours: Energy efficient LEDs, Direct light emission, Luminaire housing in aluminium, Polyester powder-white coloured coat applied over a 5- stage pre-treatment, Prismatic diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) wiring, electronic control gear, Protection class II, IP 40 Ø = 140 mm, DA(Ø) = 125 mm, H = 56 mm.
80
-
-
... More
Providing and fixing Engineered wooden flooring Panel 1820 x 145 Total thickness 14 mm Numbers of panels per pack 6 Nested Lengths Max. 1 plank out of 6 m2 per pack 1,583 m2 Kg per pack 11,99 kg Toplayer PEFC controlled sources EN 13489 ± 3 mm Core board PEFC controlled sources Spruce Backing layer PEFC controlled sources Wood Veneer 2 mm Tongue and groove Length Uniclic Width Uniclic Multifit Domestic use Conditions in each pack 33 years Uniclic - Multifit connection Lifetime Commercial On request `Wood for Life` Edge Protect plus Provides a warranty on build-up of residue dirt along the edges due to maintenance over the years 10 years `Wood for Life` Surface and Edge Protect plus (lacquered products only) Provides a warranty on pollution of surface structure and a warranty on build-up residue dirt along the edges due to maintenance over the years 10 years Surface layer Wood species Oak Origin Europe Finishing UV cured Oiled finish 2 layers UV cured Lacquer Anti-scratch top coat 5 - 7 layers Natural variance Due to nature, visual surface can deviate from samples Surface treatments cf catalogue/website Nature Marquant Vibrant General aspect of installed EN 13489 Lipping - difference in height (mm) = 0,20 difference in width (mm) = 0,20 cupping lengthwise % = 0,1 cupping in width % = 0,2 Dimensional stability ISO 24339 Cupping short side max % = 0,30 Changes 30 - 85 % RH Cupping short side min % = - 0,20 Open joints short side (mm) = 0,20 Open joints long side (mm) = 0,30 Underfloor heating Suitable of special installation instructions.
1066.25
-
-
... More
LINEAR WORKSTATION (MAX-1)
Partition W 600 X H1200 X TH60mm. Side partition (LAM. / LAM)
65
-
-
... More
DSR 11.3 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 65MM DIA
5
-
-
... More
DSR 17.2.9 Supplying, installation, testing and commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.
20
-
-
... More
Providing and fixing signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm ( plus -10%) containing lumigen II as base chemical, covered under UV stablized coating and of appropriate size (Glo-lite or eq. Make) including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats anchor fasteners etc. complete in all respacts as diercted by Engineer-in-charge
118915.89
-
-
... More
DSR 2021 CHAPTER 6 ITEM NO - 6.5
Extra for brick work / AAC block masonry / Tile brick masonry in superstructure above floor V level, for each four floors or part thereof by mechanical means.
350.29
-
-
... More
DSR VRF 5.7 Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 25.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
100
-
-
... More
Supply Installation, Testing and Commisioing of Handicap Toilet special fixtures to the complete satisfaction of the engineer in charge - SITC of Grab Bar 842mm long white, White (Ref Jaquar WAC-WHT-BRO750)
5
-
-
... More
Back Storages
Storage Size W1500XD450XHT.1500MM of geeken or equivalent make as approved by engineer-incharge
30
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. - 1200 X 600 MM
650.44
-
-
... More
DSR 23.3 Providing and fixing flow switch in following sizes M.S. pipe including connection etc as required. - 150MM DIA
16
-
-
... More
DSR 1.5 Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-`F` insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads. - 2280 lpm at 70 m Head
2
-
-
... More
DSR 12.5 Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 100MM DIA
4
-
-
... More
Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in :
Cement mortar 1:4 (1 cement : 4 coarse sand)
855.28
-
-
... More
Providing and fixing of 6 mm thick premium GRIHA rated Lacquered glass of approved color by Architect/ Client / Customer, fixed with compatible neutral grade silicon on a perfectly levelled 12mm thick water proof marine plywood / MDF / Mineral fibre board which is mounted on RCC wall/any other structure. Lacquered glass must be made industrially (using curtain coating process): opaque (if viewed against a support wall), uniformly coated with PU lacquer (50 micron thick coating or more): panel to panel colour consistency (measured by photo spectrometer): highly durable (passes hardness test for minimum 220 oscillations): humidity resistance (conforms to BS EN 1036 1999 or equivalent) : environmentally friendly having Low VOC (no lead, no arsenic, no copper, no formaldehyde), low VOC content (100g/l. Silicone used should not react with lacquer coating (compatible neutral cure silicon)
371.89
-
-
... More
DSR 9.1 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal
16
-
-
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, dado, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. - 600 X 1200 MM
9.76
-
-
... More
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp and hangers etc. in concealed / inside duct / under floor and basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. - 75 mm dia (Wall Thickness - 3.2 to 3.8 mm)
120
-
-
... More
Providing and Fixing of GI Clip in perforated Metal Ceiling System of 300x1200 mm module which includes providing and fixing wall angle of size 20x20 mm made of 0.4 mm thick and 35 x 75 mm made of 0.5 mm pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm centre to centre, suspending the main C carrier of size 10x50x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1200 mm c/c. Clip in profile main runner having height of 40 mm and width of 19 mm made of GI steel 0.5 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centres with help of suspension brackets and with L profile size of 24x24x0.40mm. Wherever the main C carrier and Clip in Profile have to join, C carrier and Clip in Profile connectors have to be used, fixing with clip in tiles into Clip in Profile with : GI Metal Ceiling Clip in perforated (1.8mm dia) Beveled edge global white color tiles of size 300x1200 made out of 0.5 mm thick Galvanized Sheet Tegular edge with 8 mm drop: and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.7, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.
766.83
-
-
... More
Supply of full soil fill conical shaped planters of make : vaso eco, model no: c-series: of specified volume and dimensions in stone finish or equivalent. planters to be indigenously made by rotational moulding, with homogeneous recyclable, industrial grade polymer-resin mix, and textured surface. planters should have an integrated water outlet hole and plug, single layered peel-proof construction, light weight, rust proof, uv stabilized, anti-frost feature without any joints, and easy to clean. planter supplier must give 1 year warranty against any fading or cracking for both indoor and outdoor use. green plant and laying is extra. potting instructions as per company catalogue. - C-2016 49 (D) X 41 (H) CM V- 51LTR
130
-
-
... More
Providing and fixing weather proof cabinet of size not less than 0.6 x 0.6 x 0.45 mtr made out of M.S. sheet not less than 1.5 mm thick having central opening and 4 mm thick glazed glass doors (Two nos.) suitably marked on the outside `with the letters `FIRE HOSE` including necessary locking arrangement and painting in red colour suitable to accomodate, external yard hydrant valve, 2 nos 15 mtr long Hose pipe, branch pipe, nozzle and fire man`s axe. It shall be mounted on boundary wall complete as required.
5
-
-
... More
Supply and fixing of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium Conductor Cables : Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively and ISI marked. - 3.5 C x 185 sqm XLPE cable
115
-
-
... More
Supply,installation,testing and commissioning of PVC drain water with necessary clamps, fittings such as bends tees etc. and duly insulated. - 40 MM DIA
1500
-
-
... More
Providing and laying carpet tiles of style tessera ,construction multi level-loop,fibre Nylon-6,Guage-1/12`, stitches-13 per inch, average pile height-4mm plus - 0.5mm, eco backing I PVC with Fibreglass , tile size-25cmx100 cm, ,commercial,flammability-ASTM E 648 Class I, GB8624-2012 B1c complete
1250
-
-
... More
DSR 16.1 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun Metal
42
-
-
... More
Providing and fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required.
91
-
-
... More
DSR VRF 5.1 Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
900
-
-
... More
Table Top 25mm thick PLPB work top with pvc edge banding on all sides, top supported by 25 mm Thick Lam Gable End and front of side lam. Modesty ht 600mm . Thick PLPB. As per dwg. of geeken or equivalent make as approved by engineer-incharge Partition W 1200 X H1500 X TH60mm. Front partition (pin- UP and W/b)
5
-
-
... More
Providing and supplying Sofa
sofa . the inside frame is made of seasoned wood and has antitermite treatment. The seat and back are made of foam and is finished in leatherite upholestry. The structure is supported on Polished Solid Wood Legs. Leatherite colour and type as per directions of Engineer in Charge. The above furniture should be as per specification and sample approved by client.(3 seater sofa)
35
-
-
... More
DSR 11.5 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100MM DIA
10
-
-
... More
MD Room Round Meeting table - Round table 1200mm Dia, of 25mm prelaminated particle board with CRCA Powder coated base Model Alfa HNI make or equivalent make as per the satisfication of engineer - in - charge. Warranty 5 or more Years .
2
-
-
... More
DSR 17.2.7 Supplying, installation, testing and commissioning of fault isolator complete with base as required.
80
-
-
... More
DSR VRF 5.6 Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 22.2 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
200
-
-
... More
SITC of USB cables 10 meters M2M etc all compelte .
20
-
-
... More
Supply and Planting Seaforthia Palm having ht. 90cm to 1.20 m with 6-8 suckers, well developed, fresh and healthy lush green leaves from bottom to top complete.
60
-
-
... More
SITC of various video cables and connectors of various lengths included but not limited to HDMI, VGA plus audio as per design requirements etc all compelte
1
-
-
... More
LINEAR WORKSTATION (MAX-1)
Fixed drawer unit w400xd450xht.725mm
65
-
-
... More
Providing and fixing ISI Marked of approved make Fire Extinguishers complete with all accessories as per manufacturer`s specifications. - a) CO2 gas nozzle type - 9 Litre capacity (IS:15683).
24
-
-
... More
Providing and supplying Sofa
Providing and Fixing of sofa . the inside frame is made of seasoned wood and has antitermite treatment. The seat and back are made of foam and is finished in leatherite upholestry. The structure is supported on Polished Solid Wood Legs. Leatherite colour and type as per directions of Engineer in Charge. The above furniture should be as per specification and sample approved by client.
2 Seater
30
-
-
... More
Providing and fixing standard fireman`s axe with heavy rubber handle
16
-
-
... More
Providing and supplying Sofa
sofa . the inside frame is made of seasoned wood and has antitermite treatment. The seat and back are made of foam and is finished in leatherite upholestry. The structure is supported on Polished Solid Wood Legs. Leatherite colour and type as per directions of Engineer in Charge. The above furniture should be as per specification and sample approved by client.
1 Seater
25
-
-
... More
DSR VRF 5.5 Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 19 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
200
-
-
... More
Providing and laying Floor Architecture Collection- Poured tiles of Yarn type Eco Solution Q® Nylon ( Nylon 6 ) only: Multi-Level Pattern Loop, manufactured using solution dyeing process, Tiles of size 61 cms x 61 cms with Shaw Soil and stain resistance protective treatment ™ or equivalent containing properties of Stain Repel, Stain resist and Stain Release , Anti , with Ecoworx® Tile- 100% PVC Free / 100% Bitumen Free/ 100% Recyclable - backing system with recycled content, made from thermoplastic polyolefin compound with reinforcing layer high performance environments requiring modular flooring , having tufted yarn weight of 542.5 gsm and average yarn density of 7385 oz/cu. yd. or more, Nominal total thickness 5.79 mm minimum, Radiant Panel class1rated ( ASTM E648) ,NBS smoke ( 450, Pill test -Passed, Texture Appearance Retention Rating of 3.5 for Severe Use, Anti Microbial Treatment-Passes (AATCC-174). CRI Green Label Plus certified for indoor air quality, including fixing/ installation with Low/ Zero VOC content Adhesive. Impact Sound (ISO 10140-3) 20 dB and Sound absorption (ISO 354) 0.2 Class D.
Manufacturer to submit Test Report / Certificate stating meeting CRI`s - Severe Use Rating and Acoustic properties and complying to specification is mandatory. All Certificates to be provided before release or award of Contract.
335.34
-
-
... More
Senior Workstation of /HNI/GEEKAN or equivalent make as per satisfication of engineer - in - charge CPU Trolly - Laminated
10
-
-
... More
Supplying, installing, testing and commissioning of I/O Jack should be Category 6, TIA568B.2-1 – 250MHz, I/O Jack should be for 100 W, 22-24 AWG copper cable shall: Use insulation displacement connectors (IDC), Information outlet (RJ45 jack) should be covered under ETL Verification program for compliance with TIA568B.2-1, ETL certificate to be submitted with offer the I/O jack should be Blue colour for easy port identification, Operating Life: Minimum 750 insertion cycl
75
-
-
... More
Providing and fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects. - Plain Floor Trap (4` Ht) with 50 / 75 outlet and with height raiser
91
-
-
... More
Providing and fixing of panels - 1200mm*2400mm *20mm thickness, NRC = 0.90, Resistance to fire : REI 90 made out of mineral fibre. Panels to be fixed on framework made out GI ( 0.60mm thick and 60 MM Width ) sections to form a section of 600mm x 600mm. Panels to be fixed on the Slabs with a minimum of 50mm to 100mm void or gap with Galvanized screws of length 50 mm and Dia 4.5 mm.In case of islands - vertical shall be provided with metal section all 4 sides. In case of wall to wall, wall angle shall be provided towards the wall or UD section shall be provided which shall be concealled as per the architects design.
119.74
-
-
... More
Table Top 25mm thick PLPB work top with pvc edge banding on all sides, top supported by 25 mm Thick Lam Gable End and front of side lam. Modesty ht 600mm . Thick PLPB. As per dwg. of geeken or equivalent make as approved by engineer-incharge Partition W 900 X H1500 X TH60mm. Side partition
5
-
-
... More
Supply of LED Lights behind the Fabric Wall/False ceiling in noddes/PCB with rece nmended wattage as per manufactura`s standards to gve an effect ofambicnt lighting LED make MLS/ Bridgelux /Osram- SMD 2835, LED spacing/Pitch should be aticast 73-80mm with beam anele of 170 degree. Colour temperature shoud be as per design intent 3000K/4000K/6000K Wattage of 8-10W/mr. LED modules/PCB sbould be positioned properly to pronde an cven ight low, casting noshadows or dark spots. LED Driver Cost included.
62.79
-
-
... More
DSR 17.2.11 Supplying, installation, testing and commissioning of addressable phone control module complete as required.
16
-
-
... More
DSR 10.1 Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Gunmetal
5
-
-
... More
Supply , Installtion , Testing and comissioning of Cat6 2 Meter patch cords Blue Colour with high quality four pair twisted stranded cable terminated with RJ45 tangle free modular plugs at both the ends. The Conductor should be 24 AWG, Multi-strands and Bare Copper Conductor Metal
200
-
-
... More
DSR VRF 5.2 Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
900
-
-
... More
Supply , Installation , Testing and Commissioning of CAT6 patch cord 3 feet for rack side switch to jack panel connectivity. Approved Makes: Belden/Siemon/Panduit/Der Wiser
25
-
-
... More
DSR 17.1 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve and nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve and M.S. Pipe and socket. - 30M
21
-
-
... More
DSR 6.2 Providing laying, testing and commissioning of `C` class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation and providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.- 150MM DIA
200
-
-
... More
Providing and Applying Melamine polishing on wood work complete in all respect .
1600
-
-
... More
Providing and Fixing door handle set with lock body and cylinder for main doors and internal doors Made from high-grade zinc alloy with satin steel finish with 5-Pin cylinder mechanism with both side cylinder made of superior corrosion free brass, includes 2 No. Door Handles, 1 No. Striker Plate, Keys, Lock Body all complete
30
-
-
... More
Table Top 25mm thick PLPB work top with pvc edge banding on all sides, top supported by 25 mm Thick Lam Gable End and front of side lam. Modesty ht 600mm . Thick PLPB. As per dwg. of geeken or equivalent make as approved by engineer-incharge Partition W 900 X H1500 X TH60mm. Side partition c
5
-
-
... More
DSR 20 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
2
-
-
... More
Providing and fixing of pressure switch in M.S. pipe line including connection etc. as required.
16
-
-
... More
Providing and laying laminate flooring12mm flooring in different sizes / color of approved make complete.
2800
-
-
... More
SITC of CAT5e/CAT6 ControlandSignal cable etc all complete.
500
-
-
... More
Cabin Main Chair - Providing and supplying HNI/ Geeken or equivalent make to entire satsifaction of engineer-in-charge. Model Quip High Back Chair with head rest .This is a High back chair with Mesh Back with back tilt tension adjustable . The chair mesh is available in 6 different colours ( Green / Ruby / Cinnamon / Magenta / Indigo / Black ) with matching or contrast seat fabric according to the choice of the client..The chair has Adjustable Lumber Support . The Chair has Nylon base with 60 mm twin wheel castors .Chair has 1-D adjustable armrests with PU Pads . Seat size is 490 mm W x 435 mm D and the Chair Height 1135mm - 1225mm . Overall size of the chair is 640mm W x 665mm D x (985 mm- 1220mm) H .The chair has Pneumatic Gas Lift with Stroke=85 mm . Chair carries a warranty of 5 years.
35
-
-
... More
Officers / PS to MD Cabin Table - Providing and Supplying HNI Make Cabin Table with Main Table Dimension 1650mm L x 750 mm D and side storage 1200mm L x 450mm D x 750mm Ht . The Worktop is made of 25mm thick Prelaminated particle board with 2 mm thick PVC Lipping on the edges. The worktop is supported on inclined open Metal Legs 50mm x 50mm , powder coated understructure with Laminate Modesty panel. The Metal legs are connected by Metal Beams for stability and . The Table tops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling . Colour as per direction of Engineer in Charge. Main Table has 3 Drawer Laminate Pedestal with Castors 400mm W x 450 D x 680mm Height. Side Storage is a hinged door unit and its body is made of 18mm thick pre laminated partical Board conforming to IS : 12823. The back of the unit is made from 18mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding and sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding. The units are assembled by knock down fittings such as Minifix and Dowels. All the hardware and Hinges are from Hettich/Ebco.
15
-
-
... More
Strands for precast work including straightening,cutting, placing in position, binding and prestressing all complete. Low relaxation strands of strength 1860N/mm2 for HCS 320thk and 200thk.
42929
-
-
... More
Providing and fixing GI Plain 75mm wide x15mm deep panel upto 6mtr, shall be roll formed out of 0.5mm thick Powder Coated .The top coat of panel shall be 60 micron polyester coated finish in approved colour. The panel shall be factory cut in up to 6Mtr OR required length. Accessories Detail: Carrier: 63mm deep, made out of 0.6mm thick steel backed with enameled black paint having cut out to hold on panel in a module of 75mm closed. The joint of two carriers shall be joined by means of carrier splices maintaining a module of 75mm .4mm dia galvanized rod with special height adjustment butter fly clips made out of SS steel sheet. The edge profile G.I.shall be matching with the panel.
288.1
-
-
... More
DSR VRF 2.3 Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. - 1.2TR
1
-
-
... More
`Supply, Installation, Testing and Commisionig of Extruded Polystyrene Boards (XPS) of Thickness - 100mm (SX60Grade) on terrace with Protection Screed:
Over the HDPE of 300 microns layer, providing and laying Cement Screed
of Average Minimum thickness of 50 mm and finishing the same as per below
Specifications with desired slope:
a). Thorough cleaning the surface.
b). Providing and laying Average Minimum 50mm thick Cement Screed with
M-20 grade concrete mixed with Recron Polypropylene fibre @ 125 gms
per bag of cement with Latex .
c) On green screed concrete, Cutting the construction joints of size 6mm x 15
mm (within 12 to 36 hours after laying the concrete) by making the panel
size of 2 mtr x 2 mtr..
d). Filling the construction joints by using Polyurethane sealant. Complete
as per specification.
e) Final finishing with desired Tiling by using Tile adhesive as required.`
1001.34
-
-
... More
DSR 2.5 Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts
electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.
M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.
Suitable cement concrete foundation duly plastered and with anti vibration pads. - 2280 lpm at 70 m Head
1
-
-
... More
DSR VRF 5.10 Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 34.9 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
100
-
-
... More
Workstation - Providing and placing HNI make `Connect` Linear Workstation 1350 L x 600 W x 1200mm Ht with pedestal unit, Frame is 50 mm thick and made of vertical Aluminium Extrusions and Horizontal Steel Members of 1.2 mm to 1.5mm thickness. The System is complete hollow system with space for wire reticulation . All the frames will be duly powder coated . All the frames are fastened together by means of M6 NUTS and BOLTS . All the frames are fitted with M10 leveling bolts.board.Raceway :-The raceway cover are sliding type and are integrally fitting inside frame and are made out of 0.8mm - 1mm thick CRCA steel and powder coated. The electrical raceway can be provided below worktop or above worktop.The tables Should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling . The partition has two integrated raceway provided one at skirting level and another at the work surface level thus ensuring separation of power and networking cables. The free space available within raceway accommodates power, data and communication cables. The cable can be taken into the Frame from the floor from the bottom. Tiles: Fabric Tile: Constructed out of 5mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice. Laminate Tile: Made out of 5mm - 8mm thick Pre-laminated Medium Density Fiber Board (MDF) . Bottom Row of Steel Tile: Constructed out of 0.8mm CRCA sheet and finished in epoxy powder coating. Can be given with plain / perforations / embossed finishes.Magnetic tile: Constructed out of 0.8mm Galvanized sheet and covered with fabric of choice. Whiteboard marker tiles: Made out of 4mm MDF with 1mm glossy highly wear resistant face laminate . Total thickness is 5mm. Table tops and Gable ends are of 25mm thk Pre-laminated particleboards conforming to IS : 12823 Interior Grade.The Worktops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling . Specially designed powder coated M.S. brackets having 2mm thickness fixed to the partition frame support the tabletops. Gable ends are of 25mm thk. both side laminate (BSL) with 2mm PVC edge banding on front side. Gable Ends are fixed with 3mm thick MS brackets to Frame and with 3mm thick Brackets to Worktops. Sealed edge in table top and gable ends are with2mm thick PVC edge banding on Working side and 0.8mm thick edge banding on non working side. Each Workstation has 3Drawer Pedestal unit of size 400mm L x 450mm D x 680mm made up of 18mm thk. Prelam particle board conforming to IS : 12823 Interior Grade with 3 Drawer ( 2 Drawer plus 1 Filing ) with roller slide mechanism for 2 Drawers and Ball bearing slide for 1 Filng Unit . 10 year warranty .
2
-
-
... More
Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp and hangers etc. cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as required. - 32 MM
56
-
-
... More
Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with required suitable number of GI couplers for joining raceways and fixing GI brackets and all accessories complete in all respect as per the directions of engineer in charge (D) 100mmx38mm (GI)
200
-
-
... More
Lifting Inserts-Piekko/Halfen or similar
Insert to be easy to install, should be able to develop sufficient bond with concrete to ensure safe lifting during handling at yard and site.
3T to 5T
1200
-
-
... More
DSR 7.6 Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 80 MM DIA
10.88
-
-
... More
For feeding Domestic/ Flushing water to entire Project. Variable Speed-Location - Near underground domestic water tank with Providing and fixing electronic type level indicator for water tank mounted in panel with level display, alarm when water level is low or high, full range from one level to four level display and manual reset for alarm etc. with electrical wiring conduit supports from wall and ceiling probs and all other accessories complete as required.
Capacity 3 LPS each minimum
Head 20 Mts.
2 HP
1
-
-
... More
Sofa side table (size 16`` X 16`` X 20`` H)
Providing and Fixing of sofa . the inside frame is made of seasoned wood and has antitermite treatment. The seat and back are made of foam and is finished in leatherite upholestry. The structure is supported on Polished Solid Wood Legs. Leatherite colour and type as per directions of Engineer in Charge. The above furniture should be as per specification and sample approved by client.
25
-
-
... More
DSR 7.5 Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 65 MM DIA
150
-
-
... More
DSR 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the exisitng surface/recessed steel/ PVC conduit as required
825
-
-
... More
DSR 16.12.2.2 Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. - Thickness 0.80 mm sheet
160
-
-
... More
DSR 17.5.3.2 Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.
2000
-
-
... More
DSR 17.2.4 Supplying, installation, testing and commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.
640
-
-
... More
Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with required suitable number of GI couplers for joining raceways and fixing GI brackets and all accessories complete in all respect as per the directions of engineer in charge (B) 225mmx38mm (GI) - 3 compartment
100
-
-
... More
DSR 3.12.2 Supplying, installation, testing and commisioning of following capacity Plug In/ tap off box on the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick sheet steel enclosure (IP54) duly powder coated with MCCB complete etc. as required - 200 A 25kA SC for 1 sec
6
-
-
... More
Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with required suitable number of GI couplers for joining raceways and fixing GI brackets and all accessories complete in all respect as per the directions of engineer in charge (F) 50mmx38mm (GI)
100
-
-
... More
DSR 2020 DSR ITEM 1
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
16
-
-
... More
DSR 21.3 Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Horizontal Side Wall Sprinkler
50
-
-
... More
SITC of Mirror Light
73
-
-
... More
DSR 7.4 Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 50 MM DIA
150
-
-
... More
LINEAR WORKSTATION (MAX-1)
Partition W 900 X H1200 X TH60mm. Side partition (LAM. / LAM)
65
-
-
... More
WALLPAPER : Providing and Fixing Vinyl Coated Wall covering as per approved make and pattern as approved by the client and architect.
250.91
-
-
... More
Supply, Installation, Testing and Commissioing of Pendant luminaire with LED (Light Emitting Diode), system power 28 W, luminous flux of luminaire 3080 lm, 110 LM/W system efficacy, direct light emission CRI)80, colour temperature of 4000K, Neutral white, 230V constant current driver, 70% of luminous flux after 50,000 operating hours, energy efficient LEDs, luminaire profile in aluminium, Plastic moulded end caps, Polyester powder Aluminium white coloured coat applied over a 5- stage pre-treatment, high efficiency glare-free snap fit micro-prismatic diffuser for homogeneous light distribution, ZHLS (Zero Halogen Low Smoke) internal wiring, integral Electronic control gear, adjustable suspender, Protection class I, IP 20, L = 1199 mm, B = 75 mm, H = 90 mm, PL max = 1500 mm
30
-
-
... More
Supply , Installation , Testing and Commissioning of 1, 2 and 4 port face plate white for I/O fixing at user side. Approved Makes: Belden/Siemon/Panduit/Der Wiser
30
-
-
... More
Providing and using core cutter of market brand on site with fitting complete in all respect.
100
-
-
... More
Senior Workstation of /HNI/GEEKAN or equivalent make as per satisfication of engineer - in - charge Key Board Tray - Laminated
10
-
-
... More
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp and hangers etc. in concealed / inside duct / under floor and basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. - 110 mm dia (Wall Thickness - 3.2 to 3.8 mm)
840
-
-
... More
Supply, Installation , Testing and Commisioning of Double Glazed Unit Glass (6mm plus 16 mm air gap plus 6mm )DGU with 6mm Silicone bite and Aluminum Mill Finish spacer having a maximum U value of 1.283 W/m2K and minimum VLT of 32.5% (Saint Gobain SKN 754 II or equivalent) complete in all respect as per the direction of engineer in charge
121.9
-
-
... More
DSR 17.2.14 Supplying, installation, testing and commissioning of addressable manual call point complete as required.
24
-
-
... More
DSR 17.5.2 Supplying and laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring and FRLS outer sheath complete as required
6600
-
-
... More
Supply , Installtion , Testing and comissioning of Cat6 1Meter patch cords Blue colour with high quality four pair twisted stranded cable terminated with RJ45 tangle free modular plugs at both the ends. The Conductor should be 24 AWG, Multi-strands and Bare Copper Conductor Metal
200
-
-
... More
DSR 3.2 Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-`F` insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. - 180 lpm at 70 m Head
2
-
-
... More
DSR 15.3 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. - 150MM DIA
2
-
-
... More
DSR VRF 5.3 Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
900
-
-
... More
DSR 21.2 Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Upright sprinkler
850
-
-
... More
Supply and Planting Rhapis Palm having ht. 90cm to 1.20 m with 15 to 18 equal suckers, well developed, full of fresh and healthy leaves from bottom to top complete.
60
-
-
... More
Supply, installation, testing and commissioning of Direct drive Tube Axial fans complete with Hot dipped Galvanised Steel Casing with spun flanges, adjustable pitch die cast aluminium impeller (Hub and Aerofoil blades) and IE3 motors. Casing position shall be as per the job requirement and shall be marked on the fan assembly.The complete fan assembly with its casing, impeller and motor ( not only motor or one of the item ) shall be sourced from one manufacturer. Fan mut be AMCA certifeid for Air and sound both.Make : Systemair
4
-
-
... More
DSR VRF 2.1 Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. - 0.8TR
9
-
-
... More
Supply and Planting Lolina plant having 2-3 ft height with Coco-peat, mud and manure complete.
60
-
-
... More
DSR 17.2.5 Supplying, installation, testing and commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.
640
-
-
... More
Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with required suitable number of GI couplers for joining raceways and fixing GI brackets and all accessories complete in all respect as per the directions of engineer in charge (C) 150mmx38mm (GI)
200
-
-
... More
DSR 19.2 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
4 way - 150 mm dia M.S. Pipe
1
-
-
... More
Corner Table - Providing and Fixing of Table having dimension 500mm L x 500mm W x 400mm Ht made of 18mm thick prelaminated particle board .The top is 10mm thick Glass supported on 4 nos. SS Studs with verticals also made of 18mm Particle board.The table has a shelf of 450mm L x 450mm W under the main top. All edges are sealed with 2 mm thick PVC Lipping of HNI or Equivalent make. The above furniture should be as per specification and sample approved by client.
15
-
-
... More
DSR 24.3 Providing, fixing, testing and commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : 150MM DIA
1
-
-
... More
Table Top 25mm thick PLPB work top with pvc edge banding on all sides, top supported by 25 mm Thick Lam Gable End and front of side lam. Modesty ht 600mm . Thick PLPB. As per dwg. of geeken or equivalent make as approved by engineer-incharge Table NUMERO - 6 (RHS) PLPB Size W1500 XD 750 plus 900 XHT 750mm .
20
-
-
... More
Back Storages
Storage Size W1500XD450XHT.1200MM of geeken or equivalent make as approved by engineer-incharge
30
-
-
... More
LINEAR WORKSTATION (MAX-1)
CPU Trolly - Laminated
65
-
-
... More
Supply , Installation , Testing and Commissioning of CAT6 patch cord 7 feet for information outlet (I/O) to end user device connectivity.
Approved Makes: Belden/Siemon/Panduit/Der Wiser
35
-
-
... More
DSR 16.12.2.3 Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. - Thickness 1.00 mm sheet
156
-
-
... More
DSR 17.5.4 Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.
2000
-
-
... More
Supply,installation,testing and commissioning of PVC drain water with necessary clamps, fittings such as bends tees etc. and duly insulated. - 32 MM DIA
270
-
-
... More
DSR ITEM DSR 3.8.4
Supplying, installing on wall,testing and commissioning of following capacity Air Insulated Compact Type Rising Mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints and expansion joints, fire barrier at each floor, provision of tapping at every metre, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required.
500 A Isc = 50kA for 1 second
30
-
-
... More
Table Top 25mm thick PLPB work top with pvc edge banding on all sides, top supported by 25 mm Thick Lam Gable End and front of side lam. Modesty ht 600mm . Thick PLPB. As per dwg. of geeken or equivalent make as approved by engineer-incharge Grouting Hardware
5
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required- 1 run of cable
30000
-
-
... More
Supply, installation, testing and commissioning of Inverter type High Wall Indoor Unit with Stabilizer - 2 Tr (Inverter Compressor with stablizer) 5 star AC complete in all respects
6
-
-
... More
SITC of 20/22AWG microphone cable(as per actual) etc all complete.
500
-
-
... More
Supply and fixing of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium Conductor Cables : Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively and ISI marked. - 4 C x 10 sqm XLPE cable
154
-
-
... More
Supply 30 W Standalone Solar LED Street lighting system with 5 M long Octagonal Hot dip Galvanized pole 4 mm thick with base plate, 4 nos. fdn bolts, SA bracket 500mm long. The average thickness of galvanization is 80 Microns or more. The solar lighting system will be supplied along with Solar Lead Acid battery 36 Ah, 12.8V (IS 13369: 1992-MNRE Approved), TUV certified PV module 70 Wp (IEC 61215-2: IEC61730: IEC61701) of adequate capacity to provide 48 hrs (2 days) back up complete with all accessories and Metallic Battery box. Manufacturer of Luminaire should registered in MNRE as a channel partner having SP 1 A credit rating and it’s own photometry lab approved by NABL. Inspection shall be done in the warehouse of company and company shall provide 5 years warranty certificate on the complete system against manufacturing defects only. Warranty certificate for complete solar street lighting system will be issued along with supply of complete set of materials from the company and the service centre should be available within state.
18
-
-
... More
Supply and fixing of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium Conductor Cables : Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively and ISI marked. - 3.5 C x 35 sqm XLPE cable
122
-
-
... More
Supply and fixing of Half Fin fixed louver 250 consists of elliptical profiled louver fins kin with crowning manufactured out of 0.7 mm thick enamelled corrosion resistance aluminium Alloy AA 3105 and formed on high speed high precision DALLANCOMBI multistage roll forming system or equivalent. The roll formed fin profile is mechanically fixed between aluminium extruded press plate and continuous assembly channel. Then nylon end caps shall be provided on both sides of the fins. The louver fin skin shall be coil coated finish suitable for exterior applications. The coil is coated on a continuous paint line double baked and shall be stove enamelled and finished with special three layered coating system(consisting of first a conversion layer of thickness 800-2000mg/sq.mtr,a polyurethane base coat of 16-20 microns, and a special top coat of polyamide particles of 8-12microns thick to provide excellent abrasion and damage resistance)in a continuous coil coating process of the approved colour on the exposed side and the reverse side with epoxy. Paint performance criteria:
456.15
-
-
... More
Reception Chair - Providing and supplying HNI Model Certo Medium Back Chair .This is a Medium back chair with Mesh Back with back tilt tension adjustable . The chair has Anchored Lumber Support . The Chair has Nylon base with 50 mm twin wheel castors .Chair comes with fixed PP armrests . Seat size is 500 mm W x 520 mm D and the Chair Height 985 mm - 1080 mm . Overall size of the chair is 635mm W x 605 mm D x (985 mm- 1080mm) H . The PU foam used for chair seat is fire retardant . The chair has Pneumatic Gas Lift with Stroke=85 mm . WARRANTY: 3 Years from the date of invoice .
4
-
-
... More
Supply and fixing of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium Conductor Cables : Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively and ISI marked. - 3.5 C x 120 sqm XLPE cable
116
-
-
... More
Providing and fixing ISI Marked of approved make Fire Extinguishers complete with all accessories as per manufacturer`s specifications. - b) Mechanical Foam gas cartridge type. 9 Kg capacity (IS:15683).
24
-
-
... More
Supply andinstallation of fabric false cciling/wsll formed out with NAKSHATRA CLIPSO TRANSLUCENT Printed fabric coverings made out of polyester knitted fabric costed with Polyurethane (PU). The NAKSHATRA CLIPSO TRANSLUCENT Printed fabric width of 2m, 3m. 4.lm and5.Im with weight of 200gm/m2, thickness of 0, 3 mm. The appcarance of fabric is malt, smooth and uniform with blanq color and light transmission of 50%. The tear strength of fabric should be accordance to CH: 4,5daN, TR: 6,5 daN. The fire rating should bc accordance to B-S1, d0. The fabric should be huznidity resistant and free of carcinogenic substancesCMR) or volarile organic Compounds (VOC`s) At labeling in acydance with the French decree no. 2011-321, Ocko-Tex standard100 cetified Fabric should be installed with approved nenufacturer guidelines. It comes with 10- year manufacturer guarantee. The installation of NAKSHATRA CLIPSO TRANSLUCENT Printed fabric should be dry installation and done at room lemperature sing CLIPSO PVC. ABS Grppers. Clipso ceiling base to be made of MS or Wooden frame finishing to a lush finish of tapered and square edges in desired design as per archtect specilication, LED Fittings included in the Item.
62.74
-
-
... More
Providing and supplying Reception Desk having Dimension 1200mm L x 475mm x 1185mm Height . It has 25mm thick Worktop and Gable Ends made of pre Laminated Particle Board sealed with PVC Edge Banding. Front and Modesty Panel are 18mm thick Pre Laminated ParticleBoard Sealed with PVC EdgeBanding.. The Counter Top is 25 mm Thick Postformed ParticleBoard. Unit has One Pull out drawer with Lock and Handle of HNI or equivalent make as per satification of engineer - in- charge.
4
-
-
... More
Total equated cost (A+B)
-
134917081
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Gurugram, Haryana